2022-06-05 09:52:48

by Eugene Shalygin

[permalink] [raw]
Subject: [PATCH] hwmon: (asus-ec-sensors) add support for Strix Z690-a D4

From: Shady Nawara <[email protected]>

adds T_Sensor and VRM Temp sensors for the Asus Strix z690-a D4 motherboard

Signed-off-by: Shady Nawara <[email protected]>
Signed-off-by: Eugene Shalygin <[email protected]>
---
Documentation/hwmon/asus_ec_sensors.rst | 1 +
drivers/hwmon/asus-ec-sensors.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)

diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
index 78ca69eda877..00d8c46ef9e0 100644
--- a/Documentation/hwmon/asus_ec_sensors.rst
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -19,6 +19,7 @@ Supported boards:
* ROG STRIX X570-E GAMING WIFI II
* ROG STRIX X570-F GAMING
* ROG STRIX X570-I GAMING
+ * ROG STRIX Z690-A GAMING WIFI D4

Authors:
- Eugene Shalygin <[email protected]>
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index 57e11b2bab74..886a71b4c64e 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -54,6 +54,8 @@ static char *mutex_path_override;
/* ACPI mutex for locking access to the EC for the firmware */
#define ASUS_HW_ACCESS_MUTEX_ASMX "\\AMW0.ASMX"

+#define ASUS_HW_ACCESS_MUTEX_RMTW_ASMX "\\RMTW.ASMX"
+
#define MAX_IDENTICAL_BOARD_VARIATIONS 3

/* Moniker for the ACPI global lock (':' is not allowed in ASL identifiers) */
@@ -139,6 +141,7 @@ enum board_family {
family_unknown,
family_amd_400_series,
family_amd_500_series,
+ family_intel_600_series
};

/* All the known sensors for ASUS EC controllers */
@@ -197,6 +200,12 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
};

+static const struct ec_sensor_info sensors_family_intel_600[] = {
+ [ec_sensor_temp_t_sensor] =
+ EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+ [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+};
+
/* Shortcuts for common combinations */
#define SENSOR_SET_TEMP_CHIPSET_CPU_MB \
(SENSOR_TEMP_CHIPSET | SENSOR_TEMP_CPU | SENSOR_TEMP_MB)
@@ -330,6 +339,12 @@ static const struct ec_board_info board_info[] = {
.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
},
+ {
+ .board_names = {"ROG STRIX Z690-A GAMING WIFI D4"},
+ .sensors = SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_RMTW_ASMX,
+ .family = family_intel_600_series,
+ },
{}
};

@@ -799,6 +814,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
case family_amd_500_series:
ec_data->sensors_info = sensors_family_amd_500;
break;
+ case family_intel_600_series:
+ ec_data->sensors_info = sensors_family_intel_600;
+ break;
default:
dev_err(dev, "Unknown board family: %d",
ec_data->board_info->family);
--
2.35.1


2022-06-06 06:04:57

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH] hwmon: (asus-ec-sensors) add support for Strix Z690-a D4

On Fri, Jun 03, 2022 at 02:27:58PM +0200, Eugene Shalygin wrote:
> From: Shady Nawara <[email protected]>
>
> adds T_Sensor and VRM Temp sensors for the Asus Strix z690-a D4 motherboard
>
> Signed-off-by: Shady Nawara <[email protected]>
> Signed-off-by: Eugene Shalygin <[email protected]>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> Documentation/hwmon/asus_ec_sensors.rst | 1 +
> drivers/hwmon/asus-ec-sensors.c | 18 ++++++++++++++++++
> 2 files changed, 19 insertions(+)
>
> diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
> index 78ca69eda877..00d8c46ef9e0 100644
> --- a/Documentation/hwmon/asus_ec_sensors.rst
> +++ b/Documentation/hwmon/asus_ec_sensors.rst
> @@ -19,6 +19,7 @@ Supported boards:
> * ROG STRIX X570-E GAMING WIFI II
> * ROG STRIX X570-F GAMING
> * ROG STRIX X570-I GAMING
> + * ROG STRIX Z690-A GAMING WIFI D4
>
> Authors:
> - Eugene Shalygin <[email protected]>
> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
> index 57e11b2bab74..886a71b4c64e 100644
> --- a/drivers/hwmon/asus-ec-sensors.c
> +++ b/drivers/hwmon/asus-ec-sensors.c
> @@ -54,6 +54,8 @@ static char *mutex_path_override;
> /* ACPI mutex for locking access to the EC for the firmware */
> #define ASUS_HW_ACCESS_MUTEX_ASMX "\\AMW0.ASMX"
>
> +#define ASUS_HW_ACCESS_MUTEX_RMTW_ASMX "\\RMTW.ASMX"
> +
> #define MAX_IDENTICAL_BOARD_VARIATIONS 3
>
> /* Moniker for the ACPI global lock (':' is not allowed in ASL identifiers) */
> @@ -139,6 +141,7 @@ enum board_family {
> family_unknown,
> family_amd_400_series,
> family_amd_500_series,
> + family_intel_600_series
> };
>
> /* All the known sensors for ASUS EC controllers */
> @@ -197,6 +200,12 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
> EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
> };
>
> +static const struct ec_sensor_info sensors_family_intel_600[] = {
> + [ec_sensor_temp_t_sensor] =
> + EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
> + [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
> +};
> +
> /* Shortcuts for common combinations */
> #define SENSOR_SET_TEMP_CHIPSET_CPU_MB \
> (SENSOR_TEMP_CHIPSET | SENSOR_TEMP_CPU | SENSOR_TEMP_MB)
> @@ -330,6 +339,12 @@ static const struct ec_board_info board_info[] = {
> .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
> .family = family_amd_500_series,
> },
> + {
> + .board_names = {"ROG STRIX Z690-A GAMING WIFI D4"},
> + .sensors = SENSOR_TEMP_T_SENSOR | SENSOR_TEMP_VRM,
> + .mutex_path = ASUS_HW_ACCESS_MUTEX_RMTW_ASMX,
> + .family = family_intel_600_series,
> + },
> {}
> };
>
> @@ -799,6 +814,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
> case family_amd_500_series:
> ec_data->sensors_info = sensors_family_amd_500;
> break;
> + case family_intel_600_series:
> + ec_data->sensors_info = sensors_family_intel_600;
> + break;
> default:
> dev_err(dev, "Unknown board family: %d",
> ec_data->board_info->family);