This is the start of the stable review cycle for the 5.4.197 release.
There are 34 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 05 Jun 2022 17:38:05 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.197-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.197-rc1
Liu Jian <[email protected]>
bpf: Enlarge offset check value to INT_MAX in bpf_skb_{load,store}_bytes
Chuck Lever <[email protected]>
NFSD: Fix possible sleep during nfsd4_release_lockowner()
Trond Myklebust <[email protected]>
NFS: Memory allocation failures are not server fatal errors
Akira Yokosawa <[email protected]>
docs: submitting-patches: Fix crossref to 'The canonical patch format'
Xiu Jianfeng <[email protected]>
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
Stefan Mahnke-Hartmann <[email protected]>
tpm: Fix buffer access in tpm2_get_tpm_pt()
Marek Maślanka <[email protected]>
HID: multitouch: Add support for Google Whiskers Touchpad
Mariusz Tkaczyk <[email protected]>
raid5: introduce MD_BROKEN
Sarthak Kukreti <[email protected]>
dm verity: set DM_TARGET_IMMUTABLE feature flag
Mikulas Patocka <[email protected]>
dm stats: add cond_resched when looping over entries
Mikulas Patocka <[email protected]>
dm crypt: make printing of the key constant-time
Dan Carpenter <[email protected]>
dm integrity: fix error code in dm_integrity_ctr()
Sultan Alsawaf <[email protected]>
zsmalloc: fix races between asynchronous zspage free and page migration
Vitaly Chikunov <[email protected]>
crypto: ecrdsa - Fix incorrect use of vli_cmp
Florian Westphal <[email protected]>
netfilter: conntrack: re-fetch conntrack after insertion
Kees Cook <[email protected]>
exec: Force single empty string when argv is empty
Gustavo A. R. Silva <[email protected]>
drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()
Miri Korenblit <[email protected]>
cfg80211: set custom regdomain after wiphy registration
Stephen Brennan <[email protected]>
assoc_array: Fix BUG_ON during garbage collect
Piyush Malgujar <[email protected]>
drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
Mika Westerberg <[email protected]>
i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
Joel Stanley <[email protected]>
net: ftgmac100: Disable hardware checksum on AST2600
Thomas Bartschies <[email protected]>
net: af_key: check encryption module availability consistency
IotaHydrae <[email protected]>
pinctrl: sunxi: fix f1c100s uart2 function
Lorenzo Pieralisi <[email protected]>
ACPI: sysfs: Fix BERT error region memory mapping
Andy Shevchenko <[email protected]>
ACPI: sysfs: Make sparse happy about address space in use
Hans Verkuil <[email protected]>
media: vim2m: initialize the media device earlier
Sakari Ailus <[email protected]>
media: vim2m: Register video device after setting up internals
Willy Tarreau <[email protected]>
secure_seq: use the 64 bits of the siphash for port offset calculation
Eric Dumazet <[email protected]>
tcp: change source port randomizarion at connect() time
Dmitry Mastykin <[email protected]>
Input: goodix - fix spurious key release events
Denis Efremov (Oracle) <[email protected]>
staging: rtl8723bs: prevent ->Ssid overflow in rtw_wx_set_scan()
Thomas Gleixner <[email protected]>
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
Daniel Thompson <[email protected]>
lockdown: also lock down previous kgdb use
-------------
Diffstat:
Documentation/process/submitting-patches.rst | 2 +-
Makefile | 4 +-
arch/x86/pci/xen.c | 5 +++
crypto/ecrdsa.c | 8 ++--
drivers/acpi/sysfs.c | 23 +++++++---
drivers/char/tpm/tpm2-cmd.c | 11 ++++-
drivers/char/tpm/tpm_ibmvtpm.c | 1 +
drivers/gpu/drm/i915/intel_pm.c | 2 +-
drivers/hid/hid-multitouch.c | 3 ++
drivers/i2c/busses/i2c-ismt.c | 14 ++++++
drivers/i2c/busses/i2c-thunderx-pcidrv.c | 1 +
drivers/input/touchscreen/goodix.c | 2 +-
drivers/md/dm-crypt.c | 14 ++++--
drivers/md/dm-integrity.c | 2 -
drivers/md/dm-stats.c | 8 ++++
drivers/md/dm-verity-target.c | 1 +
drivers/md/raid5.c | 47 +++++++++----------
drivers/media/platform/vim2m.c | 22 +++++----
drivers/net/ethernet/faraday/ftgmac100.c | 5 +++
drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +-
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 6 ++-
fs/exec.c | 25 ++++++++++-
fs/nfs/internal.h | 1 +
fs/nfsd/nfs4state.c | 12 ++---
include/linux/security.h | 2 +
include/net/inet_hashtables.h | 2 +-
include/net/netfilter/nf_conntrack_core.h | 7 ++-
include/net/secure_seq.h | 4 +-
kernel/debug/debug_core.c | 24 ++++++++++
kernel/debug/kdb/kdb_main.c | 62 ++++++++++++++++++++++++--
lib/assoc_array.c | 8 ++++
mm/zsmalloc.c | 37 +++++++++++++--
net/core/filter.c | 4 +-
net/core/secure_seq.c | 4 +-
net/ipv4/inet_hashtables.c | 28 +++++++++---
net/ipv6/inet6_hashtables.c | 4 +-
net/key/af_key.c | 6 +--
net/wireless/core.c | 8 ++--
net/wireless/reg.c | 1 +
security/lockdown/lockdown.c | 2 +
40 files changed, 327 insertions(+), 97 deletions(-)
From: Hans Verkuil <[email protected]>
commit 1a28dce222a6ece725689ad58c0cf4a1b48894f4 upstream.
Before the video device node is registered, the v4l2_dev.mdev
pointer must be set in order to correctly associate the video
device with the media device. Move the initialization of the
media device up.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vim2m.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -1347,12 +1347,6 @@ static int vim2m_probe(struct platform_d
goto error_dev;
}
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
- if (ret) {
- v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
- goto error_m2m;
- }
-
#ifdef CONFIG_MEDIA_CONTROLLER
dev->mdev.dev = &pdev->dev;
strscpy(dev->mdev.model, "vim2m", sizeof(dev->mdev.model));
@@ -1361,7 +1355,15 @@ static int vim2m_probe(struct platform_d
media_device_init(&dev->mdev);
dev->mdev.ops = &m2m_media_ops;
dev->v4l2_dev.mdev = &dev->mdev;
+#endif
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+ if (ret) {
+ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+ goto error_m2m;
+ }
+
+#ifdef CONFIG_MEDIA_CONTROLLER
ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd,
MEDIA_ENT_F_PROC_VIDEO_SCALER);
if (ret) {
From: Sarthak Kukreti <[email protected]>
commit 4caae58406f8ceb741603eee460d79bacca9b1b5 upstream.
The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.
Fixes: a4ffc152198e ("dm: add verity target")
Cc: [email protected]
Signed-off-by: Sarthak Kukreti <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-verity-target.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -1217,6 +1217,7 @@ bad:
static struct target_type verity_target = {
.name = "verity",
+ .features = DM_TARGET_IMMUTABLE,
.version = {1, 5, 0},
.module = THIS_MODULE,
.ctr = verity_ctr,
From: Stefan Mahnke-Hartmann <[email protected]>
commit e57b2523bd37e6434f4e64c7a685e3715ad21e9a upstream.
Under certain conditions uninitialized memory will be accessed.
As described by TCG Trusted Platform Module Library Specification,
rev. 1.59 (Part 3: Commands), if a TPM2_GetCapability is received,
requesting a capability, the TPM in field upgrade mode may return a
zero length list.
Check the property count in tpm2_get_tpm_pt().
Fixes: 2ab3241161b3 ("tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf")
Cc: [email protected]
Signed-off-by: Stefan Mahnke-Hartmann <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm2-cmd.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -706,7 +706,16 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip
if (!rc) {
out = (struct tpm2_get_cap_out *)
&buf.data[TPM_HEADER_SIZE];
- *value = be32_to_cpu(out->value);
+ /*
+ * To prevent failing boot up of some systems, Infineon TPM2.0
+ * returns SUCCESS on TPM2_Startup in field upgrade mode. Also
+ * the TPM2_Getcapability command returns a zero length list
+ * in field upgrade mode.
+ */
+ if (be32_to_cpu(out->property_cnt) > 0)
+ *value = be32_to_cpu(out->value);
+ else
+ rc = -ENODATA;
}
tpm_buf_destroy(&buf);
return rc;
From: Andy Shevchenko <[email protected]>
commit bdd56d7d8931e842775d2e5b93d426a8d1940e33 upstream.
Sparse is not happy about address space in use in acpi_data_show():
drivers/acpi/sysfs.c:428:14: warning: incorrect type in assignment (different address spaces)
drivers/acpi/sysfs.c:428:14: expected void [noderef] __iomem *base
drivers/acpi/sysfs.c:428:14: got void *
drivers/acpi/sysfs.c:431:59: warning: incorrect type in argument 4 (different address spaces)
drivers/acpi/sysfs.c:431:59: expected void const *from
drivers/acpi/sysfs.c:431:59: got void [noderef] __iomem *base
drivers/acpi/sysfs.c:433:30: warning: incorrect type in argument 1 (different address spaces)
drivers/acpi/sysfs.c:433:30: expected void *logical_address
drivers/acpi/sysfs.c:433:30: got void [noderef] __iomem *base
Indeed, acpi_os_map_memory() returns a void pointer with dropped specific
address space. Hence, we don't need to carry out __iomem in acpi_data_show().
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Cc: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -438,7 +438,7 @@ static ssize_t acpi_data_show(struct fil
loff_t offset, size_t count)
{
struct acpi_data_attr *data_attr;
- void __iomem *base;
+ void *base;
ssize_t rc;
data_attr = container_of(bin_attr, struct acpi_data_attr, attr);
Hi Greg,
On Fri, Jun 03, 2022 at 07:42:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.197 release.
> There are 34 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 05 Jun 2022 17:38:05 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.3.1 20220531): 65 configs -> no failure
arm (gcc version 11.3.1 20220531): 106 configs -> no failure
arm64 (gcc version 11.3.1 20220531): 2 configs -> no failure
x86_64 (gcc version 11.3.1 20220531): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/1264
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
From: Kees Cook <[email protected]>
commit dcd46d897adb70d63e025f175a00a89797d31a43 upstream.
Quoting[1] Ariadne Conill:
"In several other operating systems, it is a hard requirement that the
second argument to execve(2) be the name of a program, thus prohibiting
a scenario where argc < 1. POSIX 2017 also recommends this behaviour,
but it is not an explicit requirement[2]:
The argument arg0 should point to a filename string that is
associated with the process being started by one of the exec
functions.
...
Interestingly, Michael Kerrisk opened an issue about this in 2008[3],
but there was no consensus to support fixing this issue then.
Hopefully now that CVE-2021-4034 shows practical exploitative use[4]
of this bug in a shellcode, we can reconsider.
This issue is being tracked in the KSPP issue tracker[5]."
While the initial code searches[6][7] turned up what appeared to be
mostly corner case tests, trying to that just reject argv == NULL
(or an immediately terminated pointer list) quickly started tripping[8]
existing userspace programs.
The next best approach is forcing a single empty string into argv and
adjusting argc to match. The number of programs depending on argc == 0
seems a smaller set than those calling execve with a NULL argv.
Account for the additional stack space in bprm_stack_limits(). Inject an
empty string when argc == 0 (and set argc = 1). Warn about the case so
userspace has some notice about the change:
process './argc0' launched './argc0' with NULL argv: empty string added
Additionally WARN() and reject NULL argv usage for kernel threads.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html
[3] https://bugzilla.kernel.org/show_bug.cgi?id=8408
[4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt
[5] https://github.com/KSPP/linux/issues/176
[6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0
[7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0
[8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/
Reported-by: Ariadne Conill <[email protected]>
Reported-by: Michael Kerrisk <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Ariadne Conill <[email protected]>
Acked-by: Andy Lutomirski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[vegard: fixed conflicts due to missing
886d7de631da71e30909980fdbf318f7caade262^- and
3950e975431bc914f7e81b8f2a2dbdf2064acb0f^-]
Signed-off-by: Vegard Nossum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
This has been tested in both argc == 0 and argc >= 1 cases, but I would
still appreciate a review given the differences with mainline. If it's
considered too risky I'm also fine with dropping it -- just wanted to
make sure this didn't fall through the cracks, as it does block a real
(albeit old by now) exploit.
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -454,6 +454,9 @@ static int prepare_arg_pages(struct linu
unsigned long limit, ptr_size;
bprm->argc = count(argv, MAX_ARG_STRINGS);
+ if (bprm->argc == 0)
+ pr_warn_once("process '%s' launched '%s' with NULL argv: empty string added\n",
+ current->comm, bprm->filename);
if (bprm->argc < 0)
return bprm->argc;
@@ -482,8 +485,14 @@ static int prepare_arg_pages(struct linu
* the stack. They aren't stored until much later when we can't
* signal to the parent that the child has run out of stack space.
* Instead, calculate it here so it's possible to fail gracefully.
+ *
+ * In the case of argc = 0, make sure there is space for adding a
+ * empty string (which will bump argc to 1), to ensure confused
+ * userspace programs don't start processing from argv[1], thinking
+ * argc can never be 0, to keep them from walking envp by accident.
+ * See do_execveat_common().
*/
- ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
+ ptr_size = (max(bprm->argc, 1) + bprm->envc) * sizeof(void *);
if (limit <= ptr_size)
return -E2BIG;
limit -= ptr_size;
@@ -1848,6 +1857,20 @@ static int __do_execve_file(int fd, stru
if (retval < 0)
goto out;
+ /*
+ * When argv is empty, add an empty string ("") as argv[0] to
+ * ensure confused userspace programs that start processing
+ * from argv[1] won't end up walking envp. See also
+ * bprm_stack_limits().
+ */
+ if (bprm->argc == 0) {
+ const char *argv[] = { "", NULL };
+ retval = copy_strings_kernel(1, argv, bprm);
+ if (retval < 0)
+ goto out;
+ bprm->argc = 1;
+ }
+
retval = exec_binprm(bprm);
if (retval < 0)
goto out;
From: Marek Maślanka <[email protected]>
commit 1d07cef7fd7599450b3d03e1915efc2a96e1f03f upstream.
The Google Whiskers touchpad does not work properly with the default
multitouch configuration. Instead, use the same configuration as Google
Rose.
Signed-off-by: Marek Maslanka <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-multitouch.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2158,6 +2158,9 @@ static const struct hid_device_id mt_dev
{ .driver_data = MT_CLS_GOOGLE,
HID_DEVICE(HID_BUS_ANY, HID_GROUP_ANY, USB_VENDOR_ID_GOOGLE,
USB_DEVICE_ID_GOOGLE_TOUCH_ROSE) },
+ { .driver_data = MT_CLS_GOOGLE,
+ HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_GOOGLE,
+ USB_DEVICE_ID_GOOGLE_WHISKERS) },
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
From: Chuck Lever <[email protected]>
commit ce3c4ad7f4ce5db7b4f08a1e237d8dd94b39180b upstream.
nfsd4_release_lockowner() holds clp->cl_lock when it calls
check_for_locks(). However, check_for_locks() calls nfsd_file_get()
/ nfsd_file_put() to access the backing inode's flc_posix list, and
nfsd_file_put() can sleep if the inode was recently removed.
Let's instead rely on the stateowner's reference count to gate
whether the release is permitted. This should be a reliable
indication of locks-in-use since file lock operations and
->lm_get_owner take appropriate references, which are released
appropriately when file locks are removed.
Reported-by: Dai Ngo <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4state.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -6894,16 +6894,12 @@ nfsd4_release_lockowner(struct svc_rqst
if (sop->so_is_open_owner || !same_owner_str(sop, owner))
continue;
- /* see if there are still any locks associated with it */
- lo = lockowner(sop);
- list_for_each_entry(stp, &sop->so_stateids, st_perstateowner) {
- if (check_for_locks(stp->st_stid.sc_file, lo)) {
- status = nfserr_locks_held;
- spin_unlock(&clp->cl_lock);
- return status;
- }
+ if (atomic_read(&sop->so_count) != 1) {
+ spin_unlock(&clp->cl_lock);
+ return nfserr_locks_held;
}
+ lo = lockowner(sop);
nfs4_get_stateowner(sop);
break;
}
From: Trond Myklebust <[email protected]>
commit 452284407c18d8a522c3039339b1860afa0025a8 upstream.
We need to filter out ENOMEM in nfs_error_is_fatal_on_server(), because
running out of memory on our client is not a server error.
Reported-by: Olga Kornievskaia <[email protected]>
Fixes: 2dc23afffbca ("NFS: ENOMEM should also be a fatal error.")
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/internal.h | 1 +
1 file changed, 1 insertion(+)
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -775,6 +775,7 @@ static inline bool nfs_error_is_fatal_on
case 0:
case -ERESTARTSYS:
case -EINTR:
+ case -ENOMEM:
return false;
}
return nfs_error_is_fatal(err);
From: Sakari Ailus <[email protected]>
commit cf7f34777a5b4100a3a44ff95f3d949c62892bdd upstream.
Prevent NULL (or close to NULL) pointer dereference in various places by
registering the video device only when the V4L2 m2m framework has been set
up.
Fixes: commit 96d8eab5d0a1 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device")
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vim2m.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -1333,12 +1333,6 @@ static int vim2m_probe(struct platform_d
vfd->lock = &dev->dev_mutex;
vfd->v4l2_dev = &dev->v4l2_dev;
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
- if (ret) {
- v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
- goto error_v4l2;
- }
-
video_set_drvdata(vfd, dev);
v4l2_info(&dev->v4l2_dev,
"Device registered as /dev/video%d\n", vfd->num);
@@ -1353,6 +1347,12 @@ static int vim2m_probe(struct platform_d
goto error_dev;
}
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+ if (ret) {
+ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+ goto error_m2m;
+ }
+
#ifdef CONFIG_MEDIA_CONTROLLER
dev->mdev.dev = &pdev->dev;
strscpy(dev->mdev.model, "vim2m", sizeof(dev->mdev.model));
@@ -1366,7 +1366,7 @@ static int vim2m_probe(struct platform_d
MEDIA_ENT_F_PROC_VIDEO_SCALER);
if (ret) {
v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller\n");
- goto error_dev;
+ goto error_v4l2;
}
ret = media_device_register(&dev->mdev);
@@ -1381,11 +1381,13 @@ static int vim2m_probe(struct platform_d
error_m2m_mc:
v4l2_m2m_unregister_media_controller(dev->m2m_dev);
#endif
-error_dev:
+error_v4l2:
video_unregister_device(&dev->vfd);
/* vim2m_device_release called by video_unregister_device to release various objects */
return ret;
-error_v4l2:
+error_m2m:
+ v4l2_m2m_release(dev->m2m_dev);
+error_dev:
v4l2_device_unregister(&dev->v4l2_dev);
error_free:
kfree(dev);
From: Joel Stanley <[email protected]>
[ Upstream commit 6fd45e79e8b93b8d22fb8fe22c32fbad7e9190bd ]
The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.
On a local network, the following test was performed using a 1MB file of
random data.
On the receiver run this script:
#!/bin/bash
while [ 1 ]; do
# Zero the stats
nstat -r > /dev/null
nc -l 9899 > test-file
# Check for checksum errors
TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
if [ -z "$TcpInCsumErrors" ]; then
echo No TcpInCsumErrors
else
echo TcpInCsumErrors = $TcpInCsumErrors
fi
done
On an AST2600 system:
# nc <IP of receiver host> 9899 < test-file
The test was repeated with various MTU values:
# ip link set mtu 1410 dev eth0
The observed results:
1500 - good
1434 - bad
1400 - good
1410 - bad
1420 - good
The test was repeated after disabling tx checksumming:
# ethtool -K eth0 tx-checksumming off
And all MTU values tested resulted in transfers without error.
An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.
David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.
The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.
Reported-by: David Wilder <[email protected]>
Reviewed-by: Dylan Hung <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 2c06cdcd3e75..d7478d332820 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1880,6 +1880,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
/* AST2400 doesn't have working HW checksum generation */
if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
+ /* AST2600 tx checksum with NCSI is broken */
+ if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac"))
+ netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
if (np && of_get_property(np, "no-hw-checksum", NULL))
netdev->hw_features &= ~(NETIF_F_HW_CSUM | NETIF_F_RXCSUM);
netdev->features |= netdev->hw_features;
--
2.35.1
From: Sultan Alsawaf <[email protected]>
commit 2505a981114dcb715f8977b8433f7540854851d8 upstream.
The asynchronous zspage free worker tries to lock a zspage's entire page
list without defending against page migration. Since pages which haven't
yet been locked can concurrently migrate off the zspage page list while
lock_zspage() churns away, lock_zspage() can suffer from a few different
lethal races.
It can lock a page which no longer belongs to the zspage and unsafely
dereference page_private(), it can unsafely dereference a torn pointer to
the next page (since there's a data race), and it can observe a spurious
NULL pointer to the next page and thus not lock all of the zspage's pages
(since a single page migration will reconstruct the entire page list, and
create_page_chain() unconditionally zeroes out each list pointer in the
process).
Fix the races by using migrate_read_lock() in lock_zspage() to synchronize
with page migration.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 77ff465799c602 ("zsmalloc: zs_page_migrate: skip unnecessary loops but not return -EBUSY if zspage is not inuse")
Signed-off-by: Sultan Alsawaf <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/zsmalloc.c | 37 +++++++++++++++++++++++++++++++++----
1 file changed, 33 insertions(+), 4 deletions(-)
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -1748,11 +1748,40 @@ static enum fullness_group putback_zspag
*/
static void lock_zspage(struct zspage *zspage)
{
- struct page *page = get_first_page(zspage);
+ struct page *curr_page, *page;
- do {
- lock_page(page);
- } while ((page = get_next_page(page)) != NULL);
+ /*
+ * Pages we haven't locked yet can be migrated off the list while we're
+ * trying to lock them, so we need to be careful and only attempt to
+ * lock each page under migrate_read_lock(). Otherwise, the page we lock
+ * may no longer belong to the zspage. This means that we may wait for
+ * the wrong page to unlock, so we must take a reference to the page
+ * prior to waiting for it to unlock outside migrate_read_lock().
+ */
+ while (1) {
+ migrate_read_lock(zspage);
+ page = get_first_page(zspage);
+ if (trylock_page(page))
+ break;
+ get_page(page);
+ migrate_read_unlock(zspage);
+ wait_on_page_locked(page);
+ put_page(page);
+ }
+
+ curr_page = page;
+ while ((page = get_next_page(curr_page))) {
+ if (trylock_page(page)) {
+ curr_page = page;
+ } else {
+ get_page(page);
+ migrate_read_unlock(zspage);
+ wait_on_page_locked(page);
+ put_page(page);
+ migrate_read_lock(zspage);
+ }
+ }
+ migrate_read_unlock(zspage);
}
static int zs_init_fs_context(struct fs_context *fc)
From: Liu Jian <[email protected]>
commit 45969b4152c1752089351cd6836a42a566d49bcf upstream.
The data length of skb frags + frag_list may be greater than 0xffff, and
skb_header_pointer can not handle negative offset. So, here INT_MAX is used
to check the validity of offset. Add the same change to the related function
skb_store_bytes.
Fixes: 05c74e5e53f6 ("bpf: add bpf_skb_load_bytes helper")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/filter.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -1668,7 +1668,7 @@ BPF_CALL_5(bpf_skb_store_bytes, struct s
if (unlikely(flags & ~(BPF_F_RECOMPUTE_CSUM | BPF_F_INVALIDATE_HASH)))
return -EINVAL;
- if (unlikely(offset > 0xffff))
+ if (unlikely(offset > INT_MAX))
return -EFAULT;
if (unlikely(bpf_try_make_writable(skb, offset + len)))
return -EFAULT;
@@ -1703,7 +1703,7 @@ BPF_CALL_4(bpf_skb_load_bytes, const str
{
void *ptr;
- if (unlikely(offset > 0xffff))
+ if (unlikely(offset > INT_MAX))
goto err_clear;
ptr = skb_header_pointer(skb, offset, len, to);
From: Mikulas Patocka <[email protected]>
commit bfe2b0146c4d0230b68f5c71a64380ff8d361f8b upstream.
dm-stats can be used with a very large number of entries (it is only
limited by 1/4 of total system memory), so add rescheduling points to
the loops that iterate over the entries.
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-stats.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -224,6 +224,7 @@ void dm_stats_cleanup(struct dm_stats *s
atomic_read(&shared->in_flight[READ]),
atomic_read(&shared->in_flight[WRITE]));
}
+ cond_resched();
}
dm_stat_free(&s->rcu_head);
}
@@ -313,6 +314,7 @@ static int dm_stats_create(struct dm_sta
for (ni = 0; ni < n_entries; ni++) {
atomic_set(&s->stat_shared[ni].in_flight[READ], 0);
atomic_set(&s->stat_shared[ni].in_flight[WRITE], 0);
+ cond_resched();
}
if (s->n_histogram_entries) {
@@ -325,6 +327,7 @@ static int dm_stats_create(struct dm_sta
for (ni = 0; ni < n_entries; ni++) {
s->stat_shared[ni].tmp.histogram = hi;
hi += s->n_histogram_entries + 1;
+ cond_resched();
}
}
@@ -345,6 +348,7 @@ static int dm_stats_create(struct dm_sta
for (ni = 0; ni < n_entries; ni++) {
p[ni].histogram = hi;
hi += s->n_histogram_entries + 1;
+ cond_resched();
}
}
}
@@ -474,6 +478,7 @@ static int dm_stats_list(struct dm_stats
}
DMEMIT("\n");
}
+ cond_resched();
}
mutex_unlock(&stats->mutex);
@@ -750,6 +755,7 @@ static void __dm_stat_clear(struct dm_st
local_irq_enable();
}
}
+ cond_resched();
}
}
@@ -865,6 +871,8 @@ static int dm_stats_print(struct dm_stat
if (unlikely(sz + 1 >= maxlen))
goto buffer_overflow;
+
+ cond_resched();
}
if (clear)
From: Piyush Malgujar <[email protected]>
[ Upstream commit 03a35bc856ddc09f2cc1f4701adecfbf3b464cb3 ]
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.
Signed-off-by: Szymon Balcerak <[email protected]>
Signed-off-by: Piyush Malgujar <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-thunderx-pcidrv.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index 19f8eec38717..107aeb8b54da 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -208,6 +208,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
i2c->adap.dev.parent = dev;
i2c->adap.dev.of_node = pdev->dev.of_node;
+ i2c->adap.dev.fwnode = dev->fwnode;
snprintf(i2c->adap.name, sizeof(i2c->adap.name),
"Cavium ThunderX i2c adapter at %s", dev_name(dev));
i2c_set_adapdata(&i2c->adap, i2c);
--
2.35.1
From: Lorenzo Pieralisi <[email protected]>
commit 1bbc21785b7336619fb6a67f1fff5afdaf229acc upstream.
Currently the sysfs interface maps the BERT error region as "memory"
(through acpi_os_map_memory()) in order to copy the error records into
memory buffers through memory operations (eg memory_read_from_buffer()).
The OS system cannot detect whether the BERT error region is part of
system RAM or it is "device memory" (eg BMC memory) and therefore it
cannot detect which memory attributes the bus to memory support (and
corresponding kernel mapping, unless firmware provides the required
information).
The acpi_os_map_memory() arch backend implementation determines the
mapping attributes. On arm64, if the BERT error region is not present in
the EFI memory map, the error region is mapped as device-nGnRnE; this
triggers alignment faults since memcpy unaligned accesses are not
allowed in device-nGnRnE regions.
The ACPI sysfs code cannot therefore map by default the BERT error
region with memory semantics but should use a safer default.
Change the sysfs code to map the BERT error region as MMIO (through
acpi_os_map_iomem()) and use the memcpy_fromio() interface to read the
error region into the kernel buffer.
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0g+OVbhuUUDrLUCfX_mVqY_e8ubgLTU98=jfjTeb4t+Pw@mail.gmail.com
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Tested-by: Veronika Kabatova <[email protected]>
Tested-by: Aristeu Rozanski <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Cc: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/sysfs.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -438,19 +438,30 @@ static ssize_t acpi_data_show(struct fil
loff_t offset, size_t count)
{
struct acpi_data_attr *data_attr;
- void *base;
- ssize_t rc;
+ void __iomem *base;
+ ssize_t size;
data_attr = container_of(bin_attr, struct acpi_data_attr, attr);
+ size = data_attr->attr.size;
- base = acpi_os_map_memory(data_attr->addr, data_attr->attr.size);
+ if (offset < 0)
+ return -EINVAL;
+
+ if (offset >= size)
+ return 0;
+
+ if (count > size - offset)
+ count = size - offset;
+
+ base = acpi_os_map_iomem(data_attr->addr, size);
if (!base)
return -ENOMEM;
- rc = memory_read_from_buffer(buf, count, &offset, base,
- data_attr->attr.size);
- acpi_os_unmap_memory(base, data_attr->attr.size);
- return rc;
+ memcpy_fromio(buf, base + offset, count);
+
+ acpi_os_unmap_iomem(base, size);
+
+ return count;
}
static int acpi_bert_data_init(void *th, struct acpi_data_attr *data_attr)
From: Stephen Brennan <[email protected]>
commit d1dc87763f406d4e67caf16dbe438a5647692395 upstream.
A rare BUG_ON triggered in assoc_array_gc:
[3430308.818153] kernel BUG at lib/assoc_array.c:1609!
Which corresponded to the statement currently at line 1593 upstream:
BUG_ON(assoc_array_ptr_is_meta(p));
Using the data from the core dump, I was able to generate a userspace
reproducer[1] and determine the cause of the bug.
[1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc
After running the iterator on the entire branch, an internal tree node
looked like the following:
NODE (nr_leaves_on_branch: 3)
SLOT [0] NODE (2 leaves)
SLOT [1] NODE (1 leaf)
SLOT [2..f] NODE (empty)
In the userspace reproducer, the pr_devel output when compressing this
node was:
-- compress node 0x5607cc089380 --
free=0, leaves=0
[0] retain node 2/1 [nx 0]
[1] fold node 1/1 [nx 0]
[2] fold node 0/1 [nx 2]
[3] fold node 0/2 [nx 2]
[4] fold node 0/3 [nx 2]
[5] fold node 0/4 [nx 2]
[6] fold node 0/5 [nx 2]
[7] fold node 0/6 [nx 2]
[8] fold node 0/7 [nx 2]
[9] fold node 0/8 [nx 2]
[10] fold node 0/9 [nx 2]
[11] fold node 0/10 [nx 2]
[12] fold node 0/11 [nx 2]
[13] fold node 0/12 [nx 2]
[14] fold node 0/13 [nx 2]
[15] fold node 0/14 [nx 2]
after: 3
At slot 0, an internal node with 2 leaves could not be folded into the
node, because there was only one available slot (slot 0). Thus, the
internal node was retained. At slot 1, the node had one leaf, and was
able to be folded in successfully. The remaining nodes had no leaves,
and so were removed. By the end of the compression stage, there were 14
free slots, and only 3 leaf nodes. The tree was ascended and then its
parent node was compressed. When this node was seen, it could not be
folded, due to the internal node it contained.
The invariant for compression in this function is: whenever
nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all
leaf nodes. The compression step currently cannot guarantee this, given
the corner case shown above.
To fix this issue, retry compression whenever we have retained a node,
and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second
compression will then allow the node in slot 1 to be folded in,
satisfying the invariant. Below is the output of the reproducer once the
fix is applied:
-- compress node 0x560e9c562380 --
free=0, leaves=0
[0] retain node 2/1 [nx 0]
[1] fold node 1/1 [nx 0]
[2] fold node 0/1 [nx 2]
[3] fold node 0/2 [nx 2]
[4] fold node 0/3 [nx 2]
[5] fold node 0/4 [nx 2]
[6] fold node 0/5 [nx 2]
[7] fold node 0/6 [nx 2]
[8] fold node 0/7 [nx 2]
[9] fold node 0/8 [nx 2]
[10] fold node 0/9 [nx 2]
[11] fold node 0/10 [nx 2]
[12] fold node 0/11 [nx 2]
[13] fold node 0/12 [nx 2]
[14] fold node 0/13 [nx 2]
[15] fold node 0/14 [nx 2]
internal nodes remain despite enough space, retrying
-- compress node 0x560e9c562380 --
free=14, leaves=1
[0] fold node 2/15 [nx 0]
after: 3
Changes
=======
DH:
- Use false instead of 0.
- Reorder the inserted lines in a couple of places to put retained before
next_slot.
ver #2)
- Fix typo in pr_devel, correct comparison to "<="
Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Cc: <[email protected]>
Signed-off-by: Stephen Brennan <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Andrew Morton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v1
Link: https://lore.kernel.org/r/[email protected]/ # v2
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/assoc_array.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/lib/assoc_array.c
+++ b/lib/assoc_array.c
@@ -1462,6 +1462,7 @@ int assoc_array_gc(struct assoc_array *a
struct assoc_array_ptr *cursor, *ptr;
struct assoc_array_ptr *new_root, *new_parent, **new_ptr_pp;
unsigned long nr_leaves_on_tree;
+ bool retained;
int keylen, slot, nr_free, next_slot, i;
pr_devel("-->%s()\n", __func__);
@@ -1538,6 +1539,7 @@ continue_node:
goto descend;
}
+retry_compress:
pr_devel("-- compress node %p --\n", new_n);
/* Count up the number of empty slots in this node and work out the
@@ -1555,6 +1557,7 @@ continue_node:
pr_devel("free=%d, leaves=%lu\n", nr_free, new_n->nr_leaves_on_branch);
/* See what we can fold in */
+ retained = false;
next_slot = 0;
for (slot = 0; slot < ASSOC_ARRAY_FAN_OUT; slot++) {
struct assoc_array_shortcut *s;
@@ -1604,9 +1607,14 @@ continue_node:
pr_devel("[%d] retain node %lu/%d [nx %d]\n",
slot, child->nr_leaves_on_branch, nr_free + 1,
next_slot);
+ retained = true;
}
}
+ if (retained && new_n->nr_leaves_on_branch <= ASSOC_ARRAY_FAN_OUT) {
+ pr_devel("internal nodes remain despite enough space, retrying\n");
+ goto retry_compress;
+ }
pr_devel("after: %lu\n", new_n->nr_leaves_on_branch);
nr_leaves_on_tree = new_n->nr_leaves_on_branch;
From: Eric Dumazet <[email protected]>
commit 190cc82489f46f9d88e73c81a47e14f80a791e1a upstream.
RFC 6056 (Recommendations for Transport-Protocol Port Randomization)
provides good summary of why source selection needs extra care.
David Dworken reminded us that linux implements Algorithm 3
as described in RFC 6056 3.3.3
Quoting David :
In the context of the web, this creates an interesting info leak where
websites can count how many TCP connections a user's computer is
establishing over time. For example, this allows a website to count
exactly how many subresources a third party website loaded.
This also allows:
- Distinguishing between different users behind a VPN based on
distinct source port ranges.
- Tracking users over time across multiple networks.
- Covert communication channels between different browsers/browser
profiles running on the same computer
- Tracking what applications are running on a computer based on
the pattern of how fast source ports are getting incremented.
Section 3.3.4 describes an enhancement, that reduces
attackers ability to use the basic information currently
stored into the shared 'u32 hint'.
This change also decreases collision rate when
multiple applications need to connect() to
different destinations.
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: David Dworken <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Stefan Ghinea <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/inet_hashtables.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -671,6 +671,17 @@ unlock:
}
EXPORT_SYMBOL_GPL(inet_unhash);
+/* RFC 6056 3.3.4. Algorithm 4: Double-Hash Port Selection Algorithm
+ * Note that we use 32bit integers (vs RFC 'short integers')
+ * because 2^16 is not a multiple of num_ephemeral and this
+ * property might be used by clever attacker.
+ * RFC claims using TABLE_LENGTH=10 buckets gives an improvement,
+ * we use 256 instead to really give more isolation and
+ * privacy, this only consumes 1 KB of kernel memory.
+ */
+#define INET_TABLE_PERTURB_SHIFT 8
+static u32 table_perturb[1 << INET_TABLE_PERTURB_SHIFT];
+
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk, u32 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
@@ -684,8 +695,8 @@ int __inet_hash_connect(struct inet_time
struct inet_bind_bucket *tb;
u32 remaining, offset;
int ret, i, low, high;
- static u32 hint;
int l3mdev;
+ u32 index;
if (port) {
head = &hinfo->bhash[inet_bhashfn(net, port,
@@ -712,7 +723,10 @@ int __inet_hash_connect(struct inet_time
if (likely(remaining > 1))
remaining &= ~1U;
- offset = (hint + port_offset) % remaining;
+ net_get_random_once(table_perturb, sizeof(table_perturb));
+ index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
+
+ offset = (READ_ONCE(table_perturb[index]) + port_offset) % remaining;
/* In first pass we try ports of @low parity.
* inet_csk_get_port() does the opposite choice.
*/
@@ -766,7 +780,7 @@ next_port:
return -EADDRNOTAVAIL;
ok:
- hint += i + 2;
+ WRITE_ONCE(table_perturb[index], READ_ONCE(table_perturb[index]) + i + 2);
/* Head lock still held and bh's disabled */
inet_bind_hash(sk, tb, port);
From: Mika Westerberg <[email protected]>
[ Upstream commit 17a0f3acdc6ec8b89ad40f6e22165a4beee25663 ]
Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
[fault reason 05] PTE Write access is not set
To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.
Signed-off-by: Mika Westerberg <[email protected]>
Reviewed-by: From: Andy Shevchenko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-ismt.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 2f95e25a10f7..53325419ec13 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -81,6 +81,7 @@
#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */
#define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */
+#define ISMT_LOG_ENTRIES 3 /* number of interrupt cause log entries */
/* Hardware Descriptor Constants - Control Field */
#define ISMT_DESC_CWRL 0x01 /* Command/Write Length */
@@ -174,6 +175,8 @@ struct ismt_priv {
u8 head; /* ring buffer head pointer */
struct completion cmp; /* interrupt completion */
u8 buffer[I2C_SMBUS_BLOCK_MAX + 16]; /* temp R/W data buffer */
+ dma_addr_t log_dma;
+ u32 *log;
};
/**
@@ -408,6 +411,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
memset(desc, 0, sizeof(struct ismt_desc));
desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
+ /* Always clear the log entries */
+ memset(priv->log, 0, ISMT_LOG_ENTRIES * sizeof(u32));
+
/* Initialize common control bits */
if (likely(pci_dev_msi_enabled(priv->pci_dev)))
desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
@@ -697,6 +703,8 @@ static void ismt_hw_init(struct ismt_priv *priv)
/* initialize the Master Descriptor Base Address (MDBA) */
writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
+ writeq(priv->log_dma, priv->smba + ISMT_GR_SMTICL);
+
/* initialize the Master Control Register (MCTRL) */
writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
@@ -784,6 +792,12 @@ static int ismt_dev_init(struct ismt_priv *priv)
priv->head = 0;
init_completion(&priv->cmp);
+ priv->log = dmam_alloc_coherent(&priv->pci_dev->dev,
+ ISMT_LOG_ENTRIES * sizeof(u32),
+ &priv->log_dma, GFP_KERNEL);
+ if (!priv->log)
+ return -ENOMEM;
+
return 0;
}
--
2.35.1
From: Willy Tarreau <[email protected]>
commit b2d057560b8107c633b39aabe517ff9d93f285e3 upstream.
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <[email protected]>
Cc: Moshe Kol <[email protected]>
Cc: Yossi Gilad <[email protected]>
Cc: Amit Klein <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
[SG: Adjusted context]
Signed-off-by: Stefan Ghinea <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/inet_hashtables.h | 2 +-
include/net/secure_seq.h | 4 ++--
net/core/secure_seq.c | 4 ++--
net/ipv4/inet_hashtables.c | 10 ++++++----
net/ipv6/inet6_hashtables.c | 4 ++--
5 files changed, 13 insertions(+), 11 deletions(-)
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -420,7 +420,7 @@ static inline void sk_rcv_saddr_set(stru
}
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
- struct sock *sk, u32 port_offset,
+ struct sock *sk, u64 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
struct sock *, __u16,
struct inet_timewait_sock **));
--- a/include/net/secure_seq.h
+++ b/include/net/secure_seq.h
@@ -4,8 +4,8 @@
#include <linux/types.h>
-u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
__be16 dport);
u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
__be16 sport, __be16 dport);
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -97,7 +97,7 @@ u32 secure_tcpv6_seq(const __be32 *saddr
}
EXPORT_SYMBOL(secure_tcpv6_seq);
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
__be16 dport)
{
const struct {
@@ -147,7 +147,7 @@ u32 secure_tcp_seq(__be32 saddr, __be32
}
EXPORT_SYMBOL_GPL(secure_tcp_seq);
-u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
+u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
{
net_secret_init();
return siphash_4u32((__force u32)saddr, (__force u32)daddr,
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -464,7 +464,7 @@ not_unique:
return -EADDRNOTAVAIL;
}
-static u32 inet_sk_port_offset(const struct sock *sk)
+static u64 inet_sk_port_offset(const struct sock *sk)
{
const struct inet_sock *inet = inet_sk(sk);
@@ -683,7 +683,7 @@ EXPORT_SYMBOL_GPL(inet_unhash);
static u32 table_perturb[1 << INET_TABLE_PERTURB_SHIFT];
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
- struct sock *sk, u32 port_offset,
+ struct sock *sk, u64 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
struct sock *, __u16, struct inet_timewait_sock **))
{
@@ -726,7 +726,9 @@ int __inet_hash_connect(struct inet_time
net_get_random_once(table_perturb, sizeof(table_perturb));
index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
- offset = (READ_ONCE(table_perturb[index]) + port_offset) % remaining;
+ offset = READ_ONCE(table_perturb[index]) + port_offset;
+ offset %= remaining;
+
/* In first pass we try ports of @low parity.
* inet_csk_get_port() does the opposite choice.
*/
@@ -803,7 +805,7 @@ ok:
int inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk)
{
- u32 port_offset = 0;
+ u64 port_offset = 0;
if (!inet_sk(sk)->inet_num)
port_offset = inet_sk_port_offset(sk);
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -262,7 +262,7 @@ not_unique:
return -EADDRNOTAVAIL;
}
-static u32 inet6_sk_port_offset(const struct sock *sk)
+static u64 inet6_sk_port_offset(const struct sock *sk)
{
const struct inet_sock *inet = inet_sk(sk);
@@ -274,7 +274,7 @@ static u32 inet6_sk_port_offset(const st
int inet6_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk)
{
- u32 port_offset = 0;
+ u64 port_offset = 0;
if (!inet_sk(sk)->inet_num)
port_offset = inet6_sk_port_offset(sk);
From: Akira Yokosawa <[email protected]>
commit 6d5aa418b3bd42cdccc36e94ee199af423ef7c84 upstream.
The reference to `explicit_in_reply_to` is pointless as when the
reference was added in the form of "#15" [1], Section 15) was "The
canonical patch format".
The reference of "#15" had not been properly updated in a couple of
reorganizations during the plain-text SubmittingPatches era.
Fix it by using `the_canonical_patch_format`.
[1]: 2ae19acaa50a ("Documentation: Add "how to write a good patch summary" to SubmittingPatches")
Signed-off-by: Akira Yokosawa <[email protected]>
Fixes: 5903019b2a5e ("Documentation/SubmittingPatches: convert it to ReST markup")
Fixes: 9b2c76777acc ("Documentation/SubmittingPatches: enrich the Sphinx output")
Cc: Jonathan Corbet <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: [email protected] # v4.9+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/process/submitting-patches.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -133,7 +133,7 @@ as you intend it to.
The maintainer will thank you if you write your patch description in a
form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log". See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log". See :ref:`the_canonical_patch_format`.
Solve only one problem per patch. If your description starts to get
long, that's a sign that you probably need to split up your patch.
From: Gustavo A. R. Silva <[email protected]>
commit 336feb502a715909a8136eb6a62a83d7268a353b upstream.
Fix the following -Wstringop-overflow warnings when building with GCC-11:
drivers/gpu/drm/i915/intel_pm.c:3106:9: warning: ‘intel_read_wm_latency’ accessing 16 bytes in a region of size 10 [-Wstringop-overflow=]
3106 | intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/intel_pm.c:3106:9: note: referencing argument 2 of type ‘u16 *’ {aka ‘short unsigned int *’}
drivers/gpu/drm/i915/intel_pm.c:2861:13: note: in a call to function ‘intel_read_wm_latency’
2861 | static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
| ^~~~~~~~~~~~~~~~~~~~~
by removing the over-specified array size from the argument declarations.
It seems that this code is actually safe because the size of the
array depends on the hardware generation, and the function checks
for that.
Notice that wm can be an array of 5 elements:
drivers/gpu/drm/i915/intel_pm.c:3109: intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency);
or an array of 8 elements:
drivers/gpu/drm/i915/intel_pm.c:3131: intel_read_wm_latency(dev_priv, dev_priv->wm.skl_latency);
and the compiler legitimately complains about that.
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/181
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_pm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2822,7 +2822,7 @@ hsw_compute_linetime_wm(const struct int
}
static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
- u16 wm[8])
+ u16 wm[])
{
struct intel_uncore *uncore = &dev_priv->uncore;
From: Thomas Gleixner <[email protected]>
commit 7e0815b3e09986d2fe651199363e135b9358132a upstream.
When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.
This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.
Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.
Fixes: 809f9267bbab ("xen: map MSIs into pirqs")
Reported-by: Jeremi Piotrowski <[email protected]>
Reported-by: Dusty Mabe <[email protected]>
Reported-by: Salvatore Bonaccorso <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Noah Meyerhans <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
[[email protected]: backported to 5.4]
Signed-off-by: Noah Meyerhans <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/pci/xen.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -442,6 +442,11 @@ void __init xen_msi_init(void)
x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+ /*
+ * With XEN PIRQ/Eventchannels in use PCI/MSI[-X] masking is solely
+ * controlled by the hypervisor.
+ */
+ pci_msi_ignore_mask = 1;
}
#endif
On Fri, Jun 03, 2022 at 07:42:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.197 release.
> There are 34 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 05 Jun 2022 17:38:05 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 160 pass: 160 fail: 0
Qemu test results:
total: 449 pass: 449 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Fri, 3 Jun 2022 at 23:14, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.197 release.
> There are 34 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 05 Jun 2022 17:38:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.197-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.4.197-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 2b69e7392fd9509c34f22e22898d4fd8de4bac19
* git describe: v5.4.196-35-g2b69e7392fd9
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.196-35-g2b69e7392fd9
## Test Regressions (compared to v5.4.196-11-g04a2bb5e4a0b)
No test regressions found.
## Metric Regressions (compared to v5.4.196-11-g04a2bb5e4a0b)
No metric regressions found.
## Test Fixes (compared to v5.4.196-11-g04a2bb5e4a0b)
No test fixes found.
## Metric Fixes (compared to v5.4.196-11-g04a2bb5e4a0b)
No metric fixes found.
## Test result summary
total: 130079, pass: 116477, fail: 185, skip: 12140, xfail: 1277
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 313 total, 313 passed, 0 failed
* arm64: 57 total, 53 passed, 4 failed
* i386: 28 total, 25 passed, 3 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 55 total, 54 passed, 1 failed
## Test suites summary
* fwts
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-cap_bounds-tests
* ltp-commands
* ltp-commands-tests
* ltp-containers
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests
* ltp-fcntl-locktests-tests
* ltp-filecaps
* ltp-filecaps-tests
* ltp-fs
* ltp-fs-tests
* ltp-fs_bind
* ltp-fs_bind-tests
* ltp-fs_perms_simple
* ltp-fs_perms_simple-tests
* ltp-fsx
* ltp-fsx-tests
* ltp-hugetlb
* ltp-hugetlb-tests
* ltp-io
* ltp-io-tests
* ltp-ipc
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty
* ltp-pty-tests
* ltp-sched
* ltp-sched-tests
* ltp-securebits
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
From: Xiu Jianfeng <[email protected]>
commit d0dc1a7100f19121f6e7450f9cdda11926aa3838 upstream.
Currently it returns zero when CRQ response timed out, it should return
an error code instead.
Fixes: d8d74ea3c002 ("tpm: ibmvtpm: Wait for buffer to be set before proceeding")
Signed-off-by: Xiu Jianfeng <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_ibmvtpm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -685,6 +685,7 @@ static int tpm_ibmvtpm_probe(struct vio_
if (!wait_event_timeout(ibmvtpm->crq_queue.wq,
ibmvtpm->rtce_buf != NULL,
HZ)) {
+ rc = -ENODEV;
dev_err(dev, "CRQ response timed out\n");
goto init_irq_cleanup;
}
From: Mikulas Patocka <[email protected]>
commit 567dd8f34560fa221a6343729474536aa7ede4fd upstream.
The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to
report the current key to userspace. However, this is not a constant-time
operation and it may leak information about the key via timing, via cache
access patterns or via the branch predictor.
Change dm-crypt's key printing to use "%c" instead of "%02x". Also
introduce hex2asc() that carefully avoids any branching or memory
accesses when converting a number in the range 0 ... 15 to an ascii
character.
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Tested-by: Milan Broz <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-crypt.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2817,6 +2817,11 @@ static int crypt_map(struct dm_target *t
return DM_MAPIO_SUBMITTED;
}
+static char hex2asc(unsigned char c)
+{
+ return c + '0' + ((unsigned)(9 - c) >> 4 & 0x27);
+}
+
static void crypt_status(struct dm_target *ti, status_type_t type,
unsigned status_flags, char *result, unsigned maxlen)
{
@@ -2835,9 +2840,12 @@ static void crypt_status(struct dm_targe
if (cc->key_size > 0) {
if (cc->key_string)
DMEMIT(":%u:%s", cc->key_size, cc->key_string);
- else
- for (i = 0; i < cc->key_size; i++)
- DMEMIT("%02x", cc->key[i]);
+ else {
+ for (i = 0; i < cc->key_size; i++) {
+ DMEMIT("%c%c", hex2asc(cc->key[i] >> 4),
+ hex2asc(cc->key[i] & 0xf));
+ }
+ }
} else
DMEMIT("-");
From: Vitaly Chikunov <[email protected]>
commit 7cc7ab73f83ee6d50dc9536bc3355495d8600fad upstream.
Correctly compare values that shall be greater-or-equal and not just
greater.
Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Cc: <[email protected]>
Signed-off-by: Vitaly Chikunov <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ecrdsa.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/crypto/ecrdsa.c
+++ b/crypto/ecrdsa.c
@@ -112,15 +112,15 @@ static int ecrdsa_verify(struct akcipher
/* Step 1: verify that 0 < r < q, 0 < s < q */
if (vli_is_zero(r, ndigits) ||
- vli_cmp(r, ctx->curve->n, ndigits) == 1 ||
+ vli_cmp(r, ctx->curve->n, ndigits) >= 0 ||
vli_is_zero(s, ndigits) ||
- vli_cmp(s, ctx->curve->n, ndigits) == 1)
+ vli_cmp(s, ctx->curve->n, ndigits) >= 0)
return -EKEYREJECTED;
/* Step 2: calculate hash (h) of the message (passed as input) */
/* Step 3: calculate e = h \mod q */
vli_from_le64(e, digest, ndigits);
- if (vli_cmp(e, ctx->curve->n, ndigits) == 1)
+ if (vli_cmp(e, ctx->curve->n, ndigits) >= 0)
vli_sub(e, e, ctx->curve->n, ndigits);
if (vli_is_zero(e, ndigits))
e[0] = 1;
@@ -136,7 +136,7 @@ static int ecrdsa_verify(struct akcipher
/* Step 6: calculate point C = z_1P + z_2Q, and R = x_c \mod q */
ecc_point_mult_shamir(&cc, z1, &ctx->curve->g, z2, &ctx->pub_key,
ctx->curve);
- if (vli_cmp(cc.x, ctx->curve->n, ndigits) == 1)
+ if (vli_cmp(cc.x, ctx->curve->n, ndigits) >= 0)
vli_sub(cc.x, cc.x, ctx->curve->n, ndigits);
/* Step 7: if R == r signature is valid */
From: Daniel Thompson <[email protected]>
commit eadb2f47a3ced5c64b23b90fd2a3463f63726066 upstream.
KGDB and KDB allow read and write access to kernel memory, and thus
should be restricted during lockdown. An attacker with access to a
serial port (for example, via a hypervisor console, which some cloud
vendors provide over the network) could trigger the debugger so it is
important that the debugger respect the lockdown mode when/if it is
triggered.
Fix this by integrating lockdown into kdb's existing permissions
mechanism. Unfortunately kgdb does not have any permissions mechanism
(although it certainly could be added later) so, for now, kgdb is simply
and brutally disabled by immediately exiting the gdb stub without taking
any action.
For lockdowns established early in the boot (e.g. the normal case) then
this should be fine but on systems where kgdb has set breakpoints before
the lockdown is enacted than "bad things" will happen.
CVE: CVE-2022-21499
Co-developed-by: Stephen Brennan <[email protected]>
Signed-off-by: Stephen Brennan <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Daniel Thompson <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/security.h | 2 +
kernel/debug/debug_core.c | 24 ++++++++++++++++
kernel/debug/kdb/kdb_main.c | 62 ++++++++++++++++++++++++++++++++++++++++---
security/lockdown/lockdown.c | 2 +
4 files changed, 87 insertions(+), 3 deletions(-)
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -118,10 +118,12 @@ enum lockdown_reason {
LOCKDOWN_MMIOTRACE,
LOCKDOWN_DEBUGFS,
LOCKDOWN_XMON_WR,
+ LOCKDOWN_DBG_WRITE_KERNEL,
LOCKDOWN_INTEGRITY_MAX,
LOCKDOWN_KCORE,
LOCKDOWN_KPROBES,
LOCKDOWN_BPF_READ,
+ LOCKDOWN_DBG_READ_KERNEL,
LOCKDOWN_PERF,
LOCKDOWN_TRACEFS,
LOCKDOWN_XMON_RW,
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -56,6 +56,7 @@
#include <linux/vmacache.h>
#include <linux/rcupdate.h>
#include <linux/irq.h>
+#include <linux/security.h>
#include <asm/cacheflush.h>
#include <asm/byteorder.h>
@@ -685,6 +686,29 @@ cpu_master_loop:
continue;
kgdb_connected = 0;
} else {
+ /*
+ * This is a brutal way to interfere with the debugger
+ * and prevent gdb being used to poke at kernel memory.
+ * This could cause trouble if lockdown is applied when
+ * there is already an active gdb session. For now the
+ * answer is simply "don't do that". Typically lockdown
+ * *will* be applied before the debug core gets started
+ * so only developers using kgdb for fairly advanced
+ * early kernel debug can be biten by this. Hopefully
+ * they are sophisticated enough to take care of
+ * themselves, especially with help from the lockdown
+ * message printed on the console!
+ */
+ if (security_locked_down(LOCKDOWN_DBG_WRITE_KERNEL)) {
+ if (IS_ENABLED(CONFIG_KGDB_KDB)) {
+ /* Switch back to kdb if possible... */
+ dbg_kdb_mode = 1;
+ continue;
+ } else {
+ /* ... otherwise just bail */
+ break;
+ }
+ }
error = gdb_serial_stub(ks);
}
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -45,6 +45,7 @@
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include "kdb_private.h"
#undef MODULE_PARAM_PREFIX
@@ -198,10 +199,62 @@ struct task_struct *kdb_curr_task(int cp
}
/*
- * Check whether the flags of the current command and the permissions
- * of the kdb console has allow a command to be run.
+ * Update the permissions flags (kdb_cmd_enabled) to match the
+ * current lockdown state.
+ *
+ * Within this function the calls to security_locked_down() are "lazy". We
+ * avoid calling them if the current value of kdb_cmd_enabled already excludes
+ * flags that might be subject to lockdown. Additionally we deliberately check
+ * the lockdown flags independently (even though read lockdown implies write
+ * lockdown) since that results in both simpler code and clearer messages to
+ * the user on first-time debugger entry.
+ *
+ * The permission masks during a read+write lockdown permits the following
+ * flags: INSPECT, SIGNAL, REBOOT (and ALWAYS_SAFE).
+ *
+ * The INSPECT commands are not blocked during lockdown because they are
+ * not arbitrary memory reads. INSPECT covers the backtrace family (sometimes
+ * forcing them to have no arguments) and lsmod. These commands do expose
+ * some kernel state but do not allow the developer seated at the console to
+ * choose what state is reported. SIGNAL and REBOOT should not be controversial,
+ * given these are allowed for root during lockdown already.
+ */
+static void kdb_check_for_lockdown(void)
+{
+ const int write_flags = KDB_ENABLE_MEM_WRITE |
+ KDB_ENABLE_REG_WRITE |
+ KDB_ENABLE_FLOW_CTRL;
+ const int read_flags = KDB_ENABLE_MEM_READ |
+ KDB_ENABLE_REG_READ;
+
+ bool need_to_lockdown_write = false;
+ bool need_to_lockdown_read = false;
+
+ if (kdb_cmd_enabled & (KDB_ENABLE_ALL | write_flags))
+ need_to_lockdown_write =
+ security_locked_down(LOCKDOWN_DBG_WRITE_KERNEL);
+
+ if (kdb_cmd_enabled & (KDB_ENABLE_ALL | read_flags))
+ need_to_lockdown_read =
+ security_locked_down(LOCKDOWN_DBG_READ_KERNEL);
+
+ /* De-compose KDB_ENABLE_ALL if required */
+ if (need_to_lockdown_write || need_to_lockdown_read)
+ if (kdb_cmd_enabled & KDB_ENABLE_ALL)
+ kdb_cmd_enabled = KDB_ENABLE_MASK & ~KDB_ENABLE_ALL;
+
+ if (need_to_lockdown_write)
+ kdb_cmd_enabled &= ~write_flags;
+
+ if (need_to_lockdown_read)
+ kdb_cmd_enabled &= ~read_flags;
+}
+
+/*
+ * Check whether the flags of the current command, the permissions of the kdb
+ * console and the lockdown state allow a command to be run.
*/
-static inline bool kdb_check_flags(kdb_cmdflags_t flags, int permissions,
+static bool kdb_check_flags(kdb_cmdflags_t flags, int permissions,
bool no_args)
{
/* permissions comes from userspace so needs massaging slightly */
@@ -1188,6 +1241,9 @@ static int kdb_local(kdb_reason_t reason
kdb_curr_task(raw_smp_processor_id());
KDB_DEBUG_STATE("kdb_local 1", reason);
+
+ kdb_check_for_lockdown();
+
kdb_go_count = 0;
if (reason == KDB_REASON_DEBUG) {
/* special case below */
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -33,10 +33,12 @@ static const char *const lockdown_reason
[LOCKDOWN_MMIOTRACE] = "unsafe mmio",
[LOCKDOWN_DEBUGFS] = "debugfs access",
[LOCKDOWN_XMON_WR] = "xmon write access",
+ [LOCKDOWN_DBG_WRITE_KERNEL] = "use of kgdb/kdb to write kernel RAM",
[LOCKDOWN_INTEGRITY_MAX] = "integrity",
[LOCKDOWN_KCORE] = "/proc/kcore access",
[LOCKDOWN_KPROBES] = "use of kprobes",
[LOCKDOWN_BPF_READ] = "use of bpf to read kernel RAM",
+ [LOCKDOWN_DBG_READ_KERNEL] = "use of kgdb/kdb to read kernel RAM",
[LOCKDOWN_PERF] = "unsafe use of perf",
[LOCKDOWN_TRACEFS] = "use of tracefs",
[LOCKDOWN_XMON_RW] = "xmon read and write access",
From: Dan Carpenter <[email protected]>
commit d3f2a14b8906df913cb04a706367b012db94a6e8 upstream.
The "r" variable shadows an earlier "r" that has function scope. It
means that we accidentally return success instead of an error code.
Smatch has a warning for this:
drivers/md/dm-integrity.c:4503 dm_integrity_ctr()
warn: missing error code 'r'
Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-integrity.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -4149,8 +4149,6 @@ try_smaller_buffer:
}
if (should_write_sb) {
- int r;
-
init_journal(ic, 0, ic->journal_sections, 0);
r = dm_integrity_failed(ic);
if (unlikely(r)) {
From: Thomas Bartschies <[email protected]>
[ Upstream commit 015c44d7bff3f44d569716117becd570c179ca32 ]
Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.
Signed-off-by: Thomas Bartschies <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/key/af_key.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f67d3ba72c49..dd064d5eff6e 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2904,7 +2904,7 @@ static int count_ah_combs(const struct xfrm_tmpl *t)
break;
if (!aalg->pfkey_supported)
continue;
- if (aalg_tmpl_set(t, aalg))
+ if (aalg_tmpl_set(t, aalg) && aalg->available)
sz += sizeof(struct sadb_comb);
}
return sz + sizeof(struct sadb_prop);
@@ -2922,7 +2922,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
if (!ealg->pfkey_supported)
continue;
- if (!(ealg_tmpl_set(t, ealg)))
+ if (!(ealg_tmpl_set(t, ealg) && ealg->available))
continue;
for (k = 1; ; k++) {
@@ -2933,7 +2933,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
if (!aalg->pfkey_supported)
continue;
- if (aalg_tmpl_set(t, aalg))
+ if (aalg_tmpl_set(t, aalg) && aalg->available)
sz += sizeof(struct sadb_comb);
}
}
--
2.35.1