MP5496 is the updated version of MP5416 with the only difference being
that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV
step.
Since there is no way to differentiate them other than using compatibles,
add compatible for the MP5496.
Signed-off-by: Robert Marko <[email protected]>
---
Changes in v2:
* Send DT bindings as well
Documentation/devicetree/bindings/regulator/mps,mp5416.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 90727fdc1283..7023c597c3ed 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -15,6 +15,7 @@ properties:
compatible:
enum:
- mps,mp5416
+ - mps,mp5496
reg:
maxItems: 1
--
2.36.1
MP5496 is the updated version of MP5416 with the only difference being
that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV
step.
Signed-off-by: Robert Marko <[email protected]>
---
drivers/regulator/mp5416.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/regulator/mp5416.c b/drivers/regulator/mp5416.c
index 011a825570ea..71e20e8d78ac 100644
--- a/drivers/regulator/mp5416.c
+++ b/drivers/regulator/mp5416.c
@@ -175,6 +175,17 @@ static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = {
MP5416LDO("ldo4", 4, BIT(1)),
};
+static struct regulator_desc mp5496_regulators_desc[MP5416_MAX_REGULATORS] = {
+ MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1),
+ MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 1),
+ MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1),
+ MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 1),
+ MP5416LDO("ldo1", 1, BIT(4)),
+ MP5416LDO("ldo2", 2, BIT(3)),
+ MP5416LDO("ldo3", 3, BIT(2)),
+ MP5416LDO("ldo4", 4, BIT(1)),
+};
+
static int mp5416_i2c_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -212,12 +223,14 @@ static int mp5416_i2c_probe(struct i2c_client *client)
static const struct of_device_id mp5416_of_match[] = {
{ .compatible = "mps,mp5416", .data = &mp5416_regulators_desc },
+ { .compatible = "mps,mp5496", .data = &mp5496_regulators_desc },
{},
};
MODULE_DEVICE_TABLE(of, mp5416_of_match);
static const struct i2c_device_id mp5416_id[] = {
{ "mp5416", },
+ { "mp5496", },
{ },
};
MODULE_DEVICE_TABLE(i2c, mp5416_id);
--
2.36.1
On Sat, 4 Jun 2022 16:58:13 +0200, Robert Marko wrote:
> MP5496 is the updated version of MP5416 with the only difference being
> that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV
> step.
>
> Since there is no way to differentiate them other than using compatibles,
> add compatible for the MP5496.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/4] regulator: dt-bindings: mps,mp5416: add MP5496 compatible
commit: 423156b3d37ba051e72e87a8b4791a2a0ea40592
[2/4] regulator: mp5416: alphabetically sort header includes
commit: b9dea0184b2641fb3937162a617289b23d52a587
[3/4] regulator: mp5416: use OF match data
commit: df43c245dd0535f6e2256e0261d43a4dd72b8b28
[4/4] regulator: mp5416: add support for MP5496
commit: fcdaf74a0abb6a4410b69dd80b525562457daafd
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark