In the next patches, the software/virtual drivers (slcan, v(x)can)
will depend on drivers/net/can/dev/skb.o.
This patch changes the scope of the can-dev module to include the
above mentioned drivers.
To do so, we reuse the menu "CAN Device Drivers" and turn it into a
configmenu using the config symbol CAN_DEV (which we released in
previous patch). Also, add a description to this new CAN_DEV
menuconfig.
The symbol CAN_DEV now only triggers the build of skb.o. For this
reasons, all the macros from linux/module.h are deported from
drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c.
Finally, drivers/net/can/dev/Makefile is adjusted accordingly.
Suggested-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Vincent Mailhol <[email protected]>
---
drivers/net/can/Kconfig | 29 ++++++++++++++++++++++++++---
drivers/net/can/dev/Makefile | 16 +++++++++-------
drivers/net/can/dev/dev.c | 9 +--------
drivers/net/can/dev/skb.c | 7 +++++++
4 files changed, 43 insertions(+), 18 deletions(-)
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 99f189ad35ad..3c692af16676 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -1,5 +1,25 @@
# SPDX-License-Identifier: GPL-2.0-only
-menu "CAN Device Drivers"
+
+menuconfig CAN_DEV
+ tristate "CAN Device Drivers"
+ default y
+ help
+ Controller Area Network (CAN) is serial communications protocol up to
+ 1Mbit/s for its original release (now known as Classical CAN) and up
+ to 8Mbit/s for the more recent CAN with Flexible Data-Rate
+ (CAN-FD). The CAN bus was originally mainly for automotive, but is now
+ widely used in marine (NMEA2000), industrial, and medical
+ applications. More information on the CAN network protocol family
+ PF_CAN is contained in <Documentation/networking/can.rst>.
+
+ This section contains all the CAN(-FD) device drivers including the
+ virtual ones. If you own such devices or plan to use the virtual CAN
+ interfaces to develop applications, say Y here.
+
+ To compile as a module, choose M here: the module will be called
+ can-dev.
+
+if CAN_DEV
config CAN_VCAN
tristate "Virtual Local CAN Interface (vcan)"
@@ -49,7 +69,7 @@ config CAN_SLCAN
also be built as a module. If so, the module will be called slcan.
config CAN_NETLINK
- tristate "CAN device drivers with Netlink support"
+ bool "CAN device drivers with Netlink support"
default y
help
Enables the common framework for CAN device drivers. This is the
@@ -57,6 +77,9 @@ config CAN_NETLINK
as bittiming validation, support of CAN error states, device restart
and others.
+ The additional features selected by this option will be added to the
+ can-dev module.
+
This is required by all platform and hardware CAN drivers. If you
plan to use such devices or if unsure, say Y.
@@ -178,4 +201,4 @@ config CAN_DEBUG_DEVICES
a problem with CAN support and want to see more of what is going
on.
-endmenu
+endif #CAN_DEV
diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile
index 5b4c813c6222..1baaf7020f7c 100644
--- a/drivers/net/can/dev/Makefile
+++ b/drivers/net/can/dev/Makefile
@@ -1,9 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_CAN_NETLINK) += can-dev.o
-can-dev-y += bittiming.o
-can-dev-y += dev.o
-can-dev-y += length.o
-can-dev-y += netlink.o
-can-dev-y += rx-offload.o
-can-dev-y += skb.o
+obj-$(CONFIG_CAN_DEV) += can-dev.o
+
+can-dev-y += skb.o
+
+can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o
+can-dev-$(CONFIG_CAN_NETLINK) += dev.o
+can-dev-$(CONFIG_CAN_NETLINK) += length.o
+can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
+can-dev-$(CONFIG_CAN_NETLINK) += rx-offload.o
diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c
index 96c9d9db00cf..523eaacfe29e 100644
--- a/drivers/net/can/dev/dev.c
+++ b/drivers/net/can/dev/dev.c
@@ -4,7 +4,6 @@
* Copyright (C) 2008-2009 Wolfgang Grandegger <[email protected]>
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
@@ -17,12 +16,6 @@
#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#define MOD_DESC "CAN device driver interface"
-
-MODULE_DESCRIPTION(MOD_DESC);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Wolfgang Grandegger <[email protected]>");
-
static void can_update_state_error_stats(struct net_device *dev,
enum can_state new_state)
{
@@ -513,7 +506,7 @@ static __init int can_dev_init(void)
err = can_netlink_register();
if (!err)
- pr_info(MOD_DESC "\n");
+ pr_info("CAN device driver interface\n");
return err;
}
diff --git a/drivers/net/can/dev/skb.c b/drivers/net/can/dev/skb.c
index 61660248c69e..a4208f125b76 100644
--- a/drivers/net/can/dev/skb.c
+++ b/drivers/net/can/dev/skb.c
@@ -5,6 +5,13 @@
*/
#include <linux/can/dev.h>
+#include <linux/module.h>
+
+#define MOD_DESC "CAN device driver interface"
+
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfgang Grandegger <[email protected]>");
/* Local echo of CAN messages
*
--
2.35.1