Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
drivers/video/fbdev/aty/atyfb_base.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index a3e6faed7745..bec2d0c22fb2 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -2218,13 +2218,7 @@ static int aty_bl_update_status(struct backlight_device *bd)
{
struct atyfb_par *par = bl_get_data(bd);
unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
- int level;
-
- if (bd->props.power != FB_BLANK_UNBLANK ||
- bd->props.fb_blank != FB_BLANK_UNBLANK)
- level = 0;
- else
- level = bd->props.brightness;
+ int level = backlight_get_brightness(bd);
reg |= (BLMOD_EN | BIASMOD_EN);
if (level > 0) {
--
2.30.2