From: Kairui Song <[email protected]>
Following kernel panic is observed when doing kdump/kexec on
qemu-kvm VMs that uses MPTABLE, not ACPI MADT, and supports x2apic:
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: BOCHSCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
BUG: unable to handle page fault for address: ffffffffff5fc020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 25e15067 P4D 25e15067 PUD 25e17067 PMD 25e18067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.14.10-300.fc35.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:native_apic_mem_read+0x2/0x10
Code: 14 25 20 cd e3 82 c3 90 bf 30 08 00 00 ff 14 25 18 cd e3 82 c3 cc cc cc 89 ff 89 b7 00 c0 5f ff c3 0f 1f 80 00 00 00 00 89 ff <8b> 87 00 c0 5f ff c3 0f 1f 80 00 00 00 0
RSP: 0000:ffffffff82e03e18 EFLAGS: 00010046
RAX: ffffffff81064840 RBX: ffffffffff240b6c RCX: ffffffff82f17428
RDX: c0000000ffffdfff RSI: 00000000ffffdfff RDI: 0000000000000020
RBP: ffff888023200000 R08: 0000000000000000 R09: ffffffff82e03c50
R10: ffffffff82e03c48 R11: ffffffff82f47468 R12: ffffffffff240b40
R13: ffffffffff200b30 R14: 0000000000000000 R15: 00000000000000d4
FS: 0000000000000000(0000) GS:ffffffff8365b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff5fc020 CR3: 0000000025e10000 CR4: 00000000000006b0
Call Trace:
? read_apic_id+0x15/0x30
? register_lapic_address+0x76/0x97
? default_get_smp_config+0x28b/0x42d
? dmi_check_system+0x1c/0x60
? acpi_boot_init+0x1d/0x4c3
? setup_arch+0xb37/0xc2a
? slab_is_available+0x5/0x10
? start_kernel+0x61/0x980
? load_ucode_bsp+0x4c/0xcd
? secondary_startup_64_no_verify+0xc2/0xcb
Modules linked in:
CR2: ffffffffff5fc020
random: get_random_bytes called from oops_exit+0x35/0x60 with crng_init=0
---[ end trace c9e569df3bdbefd3 ]---
It turns out MPTABLE doesn't play well with pre-enabled x2apic mode,
this series extend the apic driver interface and let MPTABLE parse
probe the driver properly.
This can be easily reproduced with qemu-kvm, use -no-acpi and enable
x2apic, so x2apic with MPTABLE will be in use, then trigger kdump/kexec.
Kairui Song (2):
x86, apic: add a more generic early_probe
x86/mpparse, kexec: probe apic driver early for x2apic
arch/x86/include/asm/apic.h | 6 ++++++
arch/x86/kernel/apic/probe_64.c | 16 ++++++++++++++++
arch/x86/kernel/apic/x2apic_cluster.c | 8 +++++++-
arch/x86/kernel/apic/x2apic_phys.c | 8 +++++++-
arch/x86/kernel/mpparse.c | 4 +++-
5 files changed, 39 insertions(+), 3 deletions(-)
--
2.35.2
From: Kairui Song <[email protected]>
There is only one early apic driver probe method: acpi_madt_oem_check,
which is used by ACPI MADT init path only.
Some apic drivers' early probe doesn't need ACPI info. Even when probed
from ACPI subsystem, the ACPI info is simply ignored. So add a more generic
early_probe method, which can be used by MPTABLE parse later.
Signed-off-by: Kairui Song <[email protected]>
---
arch/x86/include/asm/apic.h | 6 ++++++
arch/x86/kernel/apic/probe_64.c | 16 ++++++++++++++++
arch/x86/kernel/apic/x2apic_cluster.c | 8 +++++++-
arch/x86/kernel/apic/x2apic_phys.c | 8 +++++++-
4 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bd8ae0a7010a..cd3266fbfa63 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -310,6 +310,7 @@ struct apic {
/* Probe, setup and smpboot functions */
int (*probe)(void);
+ int (*early_probe)(void);
int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
int (*apic_id_valid)(u32 apicid);
int (*apic_id_registered)(void);
@@ -498,6 +499,11 @@ extern void acpi_wake_cpu_handler_update(wakeup_cpu_handler handler);
extern int default_apic_id_valid(u32 apicid);
extern int default_acpi_madt_oem_check(char *, char *);
extern void default_setup_apic_routing(void);
+#ifdef CONFIG_X86_64
+extern void apic_early_probe(void);
+#else
+static inline void apic_early_probe(void) { }
+#endif
extern u32 apic_default_calc_apicid(unsigned int cpu);
extern u32 apic_flat_calc_apicid(unsigned int cpu);
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index c46720f185c0..3f600c421f07 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -13,6 +13,22 @@
#include "local.h"
+void __init apic_early_probe(void)
+{
+ struct apic **drv;
+
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->early_probe && (*drv)->early_probe()) {
+ if (apic != *drv) {
+ apic = *drv;
+ pr_info("Switched to APIC driver %s.\n",
+ apic->name);
+ }
+ break;
+ }
+ }
+}
+
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index e696e22d0531..02eb8ea9a5b5 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -26,11 +26,16 @@ static DEFINE_PER_CPU(cpumask_var_t, ipi_mask);
static DEFINE_PER_CPU_READ_MOSTLY(struct cluster_mask *, cluster_masks);
static struct cluster_mask *cluster_hotplug_mask;
-static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_early_probe(void)
{
return x2apic_enabled();
}
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return x2apic_early_probe();
+}
+
static void x2apic_send_IPI(int cpu, int vector)
{
u32 dest = x86_cpu_to_logical_apicid[cpu];
@@ -197,6 +202,7 @@ static struct apic apic_x2apic_cluster __ro_after_init = {
.name = "cluster x2apic",
.probe = x2apic_cluster_probe,
+ .early_probe = x2apic_early_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = x2apic_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 6bde05a86b4e..c4dd4ec0f1ac 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -34,11 +34,16 @@ static bool x2apic_fadt_phys(void)
return false;
}
-static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_early_probe(void)
{
return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return x2apic_early_probe();
+}
+
static void x2apic_send_IPI(int cpu, int vector)
{
u32 dest = per_cpu(x86_cpu_to_apicid, cpu);
@@ -156,6 +161,7 @@ static struct apic apic_x2apic_phys __ro_after_init = {
.name = "physical x2apic",
.probe = x2apic_phys_probe,
+ .early_probe = x2apic_early_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = x2apic_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered,
--
2.35.2
From: Kairui Song <[email protected]>
Following kernel panic is observed when doing kdump/kexec on
virtual machines that uses MPTABLE, not ACPI MADT, and supports x2apic:
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: BOCHSCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
BUG: unable to handle page fault for address: ffffffffff5fc020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 25e15067 P4D 25e15067 PUD 25e17067 PMD 25e18067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.14.10-300.fc35.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:native_apic_mem_read+0x2/0x10
Code: 14 25 20 cd e3 82 c3 90 bf 30 08 00 00 ff 14 25 18 cd e3 82 c3 cc cc cc 89 ff 89 b7 00 c0 5f ff c3 0f 1f 80 00 00 00 00 89 ff <8b> 87 00 c0 5f ff c3 0f 1f 80 00 00 00 0
RSP: 0000:ffffffff82e03e18 EFLAGS: 00010046
RAX: ffffffff81064840 RBX: ffffffffff240b6c RCX: ffffffff82f17428
RDX: c0000000ffffdfff RSI: 00000000ffffdfff RDI: 0000000000000020
RBP: ffff888023200000 R08: 0000000000000000 R09: ffffffff82e03c50
R10: ffffffff82e03c48 R11: ffffffff82f47468 R12: ffffffffff240b40
R13: ffffffffff200b30 R14: 0000000000000000 R15: 00000000000000d4
FS: 0000000000000000(0000) GS:ffffffff8365b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff5fc020 CR3: 0000000025e10000 CR4: 00000000000006b0
Call Trace:
? read_apic_id+0x15/0x30
? register_lapic_address+0x76/0x97
? default_get_smp_config+0x28b/0x42d
? dmi_check_system+0x1c/0x60
? acpi_boot_init+0x1d/0x4c3
? setup_arch+0xb37/0xc2a
? slab_is_available+0x5/0x10
? start_kernel+0x61/0x980
? load_ucode_bsp+0x4c/0xcd
? secondary_startup_64_no_verify+0xc2/0xcb
Modules linked in:
CR2: ffffffffff5fc020
random: get_random_bytes called from oops_exit+0x35/0x60 with crng_init=0
---[ end trace c9e569df3bdbefd3 ]---
The panic happens within following init code:
setup_arch()
....
check_x2apic() <-- x2apic is enabled by first kernel before kexec,
this set x2apic_mode = 1, make sure later probes
will recognize pre-enabled x2apic.
....
acpi_boot_init(); <-- If ACPI MADT is in use, this will switch apic driver
to x2apic, but it will do nothing with MPTABLE.
x86_dtb_init();
get_smp_config();
default_get_smp_config(); <-- MPTABLE setup.
check_physptr();
smp_read_mpc();
register_lapic_address(); <-- * panic here *
init_apic_mappings();
....
The problem here is MPTABLE setup calls register_lapic_address(), which
is still using apic_flat driver, and access the apic MMIO interface. But
the address is never mapped for pre-enabled x2apic, since commit
0450193bffed6 ("x86, x2apic: Don't map lapic addr for preenabled x2apic systems"),
then it panics.
Simply map it won't work either, in x2apic mode the MMIO interface is
not usable (Intel SDM Volume 3A 10.12.2), later setups will still fail with
other errors. So it needs do a proper apic driver probe and switch to
x2apic driver to perform MSR operation instead.
Such issue is currently only seen with kdump/kexec, kernel enabled the
x2apic in first kernel and kept it enabled to 2nd kernel.
This can be easily reproduced with qemu-kvm, use -no-acpi and enable
x2apic, so x2apic with MPTABLE will be in use, then trigger kdump/kexec.
Signed-off-by: Kairui Song <[email protected]>
---
arch/x86/kernel/mpparse.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index fed721f90116..7658c8184e8c 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -202,8 +202,10 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
return 0;
/* Initialize the lapic mapping */
- if (!acpi_lapic)
+ if (!acpi_lapic) {
+ apic_early_probe();
register_lapic_address(mpc->lapic);
+ }
if (early)
return 1;
--
2.35.2