Hi Guodong,
thank you for the patch.
On Wed, Jun 08, 2022 at 01:39:06PM +0800, Guodong Liu wrote:
> This patch provides generic driving setup, which support
> 2/4/6/8/10/12/14/16mA driving, original driver just set
> raw data setup setting when use drive-strength property
You should mention in the commit message that the dt-binding expects that
drive-strength arguments be passed in mA, but the driver was expecting raw
values. And that this commit changes the driver so that it is aligned with the
binding.
Thanks,
N?colas
>
> Signed-off-by: Guodong Liu <[email protected]>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8192.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> index acccde9262ba..9faf7001369d 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> @@ -1372,8 +1372,8 @@ static const struct mtk_pin_soc mt8192_data = {
> .gpio_m = 0,
> .bias_set_combo = mtk_pinconf_bias_set_combo,
> .bias_get_combo = mtk_pinconf_bias_get_combo,
> - .drive_set = mtk_pinconf_drive_set_raw,
> - .drive_get = mtk_pinconf_drive_get_raw,
> + .drive_set = mtk_pinconf_drive_set_rev1,
> + .drive_get = mtk_pinconf_drive_get_rev1,
> .adv_pull_get = mtk_pinconf_adv_pull_get,
> .adv_pull_set = mtk_pinconf_adv_pull_set,
> .adv_drive_get = mtk_pinconf_adv_drive_get,
> --
> 2.25.5
>