From: Frank Wunderlich <[email protected]>
Rework vlan_add/vlan_del functions in preparation for dynamic cpu port.
Currently BIT(MT7530_CPU_PORT) is added to new_members, even though
mt7530_port_vlan_add() will be called on the CPU port too.
Let DSA core decide when to call port_vlan_add for the CPU port, rather
than doing it implicitly.
We can do autonomous forwarding in a certain VLAN, but not add br0 to that
VLAN and avoid flooding the CPU with those packets, if software knows it
doesn't need to process them.
Suggested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Frank Wunderlich <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
---
v2: new patch
---
drivers/net/dsa/mt7530.c | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2b02d823d497..c1922eaba67a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1527,11 +1527,11 @@ static void
mt7530_hw_vlan_add(struct mt7530_priv *priv,
struct mt7530_hw_vlan_entry *entry)
{
+ struct dsa_port *dp = dsa_to_port(priv->ds, entry->port);
u8 new_members;
u32 val;
- new_members = entry->old_members | BIT(entry->port) |
- BIT(MT7530_CPU_PORT);
+ new_members = entry->old_members | BIT(entry->port);
/* Validate the entry with independent learning, create egress tag per
* VLAN and joining the port as one of the port members.
@@ -1542,22 +1542,20 @@ mt7530_hw_vlan_add(struct mt7530_priv *priv,
/* Decide whether adding tag or not for those outgoing packets from the
* port inside the VLAN.
- */
- val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG :
- MT7530_VLAN_EGRESS_TAG;
- mt7530_rmw(priv, MT7530_VAWD2,
- ETAG_CTRL_P_MASK(entry->port),
- ETAG_CTRL_P(entry->port, val));
-
- /* CPU port is always taken as a tagged port for serving more than one
+ * CPU port is always taken as a tagged port for serving more than one
* VLANs across and also being applied with egress type stack mode for
* that VLAN tags would be appended after hardware special tag used as
* DSA tag.
*/
+ if (dsa_port_is_cpu(dp))
+ val = MT7530_VLAN_EGRESS_STACK;
+ else if (entry->untagged)
+ val = MT7530_VLAN_EGRESS_UNTAG;
+ else
+ val = MT7530_VLAN_EGRESS_TAG;
mt7530_rmw(priv, MT7530_VAWD2,
- ETAG_CTRL_P_MASK(MT7530_CPU_PORT),
- ETAG_CTRL_P(MT7530_CPU_PORT,
- MT7530_VLAN_EGRESS_STACK));
+ ETAG_CTRL_P_MASK(entry->port),
+ ETAG_CTRL_P(entry->port, val));
}
static void
@@ -1576,11 +1574,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *priv,
return;
}
- /* If certain member apart from CPU port is still alive in the VLAN,
- * the entry would be kept valid. Otherwise, the entry is got to be
- * disabled.
- */
- if (new_members && new_members != BIT(MT7530_CPU_PORT)) {
+ if (new_members) {
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
VLAN_VALID;
mt7530_write(priv, MT7530_VAWD1, val);
--
2.34.1
On 6/10/22 10:05, Frank Wunderlich wrote:
> From: Frank Wunderlich <[email protected]>
>
> Rework vlan_add/vlan_del functions in preparation for dynamic cpu port.
>
> Currently BIT(MT7530_CPU_PORT) is added to new_members, even though
> mt7530_port_vlan_add() will be called on the CPU port too.
>
> Let DSA core decide when to call port_vlan_add for the CPU port, rather
> than doing it implicitly.
>
> We can do autonomous forwarding in a certain VLAN, but not add br0 to that
> VLAN and avoid flooding the CPU with those packets, if software knows it
> doesn't need to process them.
>
> Suggested-by: Vladimir Oltean <[email protected]>
> Signed-off-by: Frank Wunderlich <[email protected]>
> Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian