Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of setting the power state by manually updating fields in
struct backlight_properties, use backlight_enable() and
backlight_disable(). These also call backlight_update_status() so the
separate call is no longer needed.
Signed-off-by: Stephen Kitt <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
---
Changes since v1: removed unnecessary parentheses
---
drivers/gpu/drm/panel/panel-dsi-cm.c | 29 ++++++----------------------
1 file changed, 6 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c
index b58cb064975f..b0213a518f9d 100644
--- a/drivers/gpu/drm/panel/panel-dsi-cm.c
+++ b/drivers/gpu/drm/panel/panel-dsi-cm.c
@@ -85,17 +85,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)
else
return;
- if (enable) {
- backlight->props.fb_blank = FB_BLANK_UNBLANK;
- backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED);
- backlight->props.power = FB_BLANK_UNBLANK;
- } else {
- backlight->props.fb_blank = FB_BLANK_NORMAL;
- backlight->props.power = FB_BLANK_POWERDOWN;
- backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED;
- }
-
- backlight_update_status(backlight);
+ if (enable)
+ backlight_enable(backlight);
+ else
+ backlight_disable(backlight);
}
static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
@@ -196,13 +189,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
int r = 0;
- int level;
-
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK)
- level = dev->props.brightness;
- else
- level = 0;
+ int level = backlight_get_brightness(dev);
dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level);
@@ -219,11 +206,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
static int dsicm_bl_get_intensity(struct backlight_device *dev)
{
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK)
- return dev->props.brightness;
-
- return 0;
+ return backlight_get_brightness(dev);
}
static const struct backlight_ops dsicm_bl_ops = {
--
2.30.2
Hi,
On Thu, Jun 16, 2022 at 07:23:14PM +0200, Stephen Kitt wrote:
> Instead of retrieving the backlight brightness in struct
> backlight_properties manually, and then checking whether the backlight
> should be on at all, use backlight_get_brightness() which does all
> this and insulates this from future changes.
>
> Instead of setting the power state by manually updating fields in
> struct backlight_properties, use backlight_enable() and
> backlight_disable(). These also call backlight_update_status() so the
> separate call is no longer needed.
>
> Signed-off-by: Stephen Kitt <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: David Airlie <[email protected]>
> Cc: Daniel Vetter <[email protected]>
> Cc: [email protected]
> ---
> Changes since v1: removed unnecessary parentheses
> ---
Reviewed-by: Sebastian Reichel <[email protected]>
-- Sebastian
> drivers/gpu/drm/panel/panel-dsi-cm.c | 29 ++++++----------------------
> 1 file changed, 6 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c
> index b58cb064975f..b0213a518f9d 100644
> --- a/drivers/gpu/drm/panel/panel-dsi-cm.c
> +++ b/drivers/gpu/drm/panel/panel-dsi-cm.c
> @@ -85,17 +85,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)
> else
> return;
>
> - if (enable) {
> - backlight->props.fb_blank = FB_BLANK_UNBLANK;
> - backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED);
> - backlight->props.power = FB_BLANK_UNBLANK;
> - } else {
> - backlight->props.fb_blank = FB_BLANK_NORMAL;
> - backlight->props.power = FB_BLANK_POWERDOWN;
> - backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED;
> - }
> -
> - backlight_update_status(backlight);
> + if (enable)
> + backlight_enable(backlight);
> + else
> + backlight_disable(backlight);
> }
>
> static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
> @@ -196,13 +189,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
> {
> struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
> int r = 0;
> - int level;
> -
> - if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
> - dev->props.power == FB_BLANK_UNBLANK)
> - level = dev->props.brightness;
> - else
> - level = 0;
> + int level = backlight_get_brightness(dev);
>
> dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level);
>
> @@ -219,11 +206,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
>
> static int dsicm_bl_get_intensity(struct backlight_device *dev)
> {
> - if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
> - dev->props.power == FB_BLANK_UNBLANK)
> - return dev->props.brightness;
> -
> - return 0;
> + return backlight_get_brightness(dev);
> }
>
> static const struct backlight_ops dsicm_bl_ops = {
> --
> 2.30.2
>
On Thu, Jun 16, 2022 at 07:23:14PM +0200, Stephen Kitt wrote:
> Instead of retrieving the backlight brightness in struct
> backlight_properties manually, and then checking whether the backlight
> should be on at all, use backlight_get_brightness() which does all
> this and insulates this from future changes.
>
> Instead of setting the power state by manually updating fields in
> struct backlight_properties, use backlight_enable() and
> backlight_disable(). These also call backlight_update_status() so the
> separate call is no longer needed.
>
> Signed-off-by: Stephen Kitt <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: David Airlie <[email protected]>
> Cc: Daniel Vetter <[email protected]>
> Cc: [email protected]
Thanks, applied to drm-misc (drm-misc-next)
Sam