GICD region was overlapping with GICR causing the latter to not map
successfully, and in turn the gic-v3 driver would fail to initialize.
This issue was hidden till commit 2b2cd74a06c3 ("irqchip/gic-v3: Claim
iomem resources") replaced of_iomap() calls with of_io_request_and_map()
that internally called request_mem_region().
Respective console output before this patchset:
[ 0.000000] GICv3: /bus@100000/interrupt-controller@1800000: couldn't map region 0
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Cc: [email protected]
Cc: Marc Zyngier <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Nishanth Menon <[email protected]>
Signed-off-by: Matt Ranostay <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Changes from v1:
* Add missing Fixes: in commit messages
Changes from v2:
* Corrected Fixes: tag to actual commit that introduced the issue
* Fixed word wrapping in commit message
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index be7f39299894..19966f72c5b3 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -33,7 +33,7 @@ gic500: interrupt-controller@1800000 {
ranges;
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+ reg = <0x00 0x01800000 0x00 0x100000>, /* GICD */
<0x00 0x01900000 0x00 0x100000>, /* GICR */
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
<0x00 0x6f010000 0x00 0x1000>, /* GICH */
--
2.36.1
On Fri, 17 Jun 2022 16:13:04 +0100,
Matt Ranostay <[email protected]> wrote:
>
> GICD region was overlapping with GICR causing the latter to not map
> successfully, and in turn the gic-v3 driver would fail to initialize.
>
> This issue was hidden till commit 2b2cd74a06c3 ("irqchip/gic-v3: Claim
> iomem resources") replaced of_iomap() calls with of_io_request_and_map()
> that internally called request_mem_region().
>
> Respective console output before this patchset:
>
> [ 0.000000] GICv3: /bus@100000/interrupt-controller@1800000: couldn't map region 0
>
> Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
> Cc: [email protected]
> Cc: Marc Zyngier <[email protected]>
> Cc: Robin Murphy <[email protected]>
> Cc: Nishanth Menon <[email protected]>
> Signed-off-by: Matt Ranostay <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
M.
--
Without deviation from the norm, progress is not possible.
Hi Matt Ranostay,
On Fri, 17 Jun 2022 08:13:04 -0700, Matt Ranostay wrote:
> GICD region was overlapping with GICR causing the latter to not map
> successfully, and in turn the gic-v3 driver would fail to initialize.
>
> This issue was hidden till commit 2b2cd74a06c3 ("irqchip/gic-v3: Claim
> iomem resources") replaced of_iomap() calls with of_io_request_and_map()
> that internally called request_mem_region().
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721s2: fix overlapping GICD memory region
commit: 856216b70a41ff3f8c866b627546afa01567b389
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D