Configure the correct GPIO for UART1 CTS.
Signed-off-by: Tim Harvey <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 407ab4592b4c..6692e55df752 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -651,7 +651,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
- cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay";
};
--
2.17.1
On Mon, Jun 13, 2022 at 12:08:18PM -0700, Tim Harvey wrote:
> Configure the correct GPIO for UART1 CTS.
>
> Signed-off-by: Tim Harvey <[email protected]>
Applied, thanks!