Use rk gpio naming convention into reset-gpios of ov5695 camera
Signed-off-by: Tommaso Merciai <[email protected]>
Tested-by: Tommaso Merciai <[email protected]>
---
arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index aee7fecdfc15..bc59a5588ea7 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -449,8 +449,8 @@ ov5695: ov5695@36 {
dvdd-supply = <&vcc1v5_dvp>;
dovdd-supply = <&vcc1v8_dvp>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+ reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
port {
ucam_out: endpoint {
--
2.25.1