file: ./drivers/gpu/drm/panel/panel-novatek-nt35510.c
line: 193,214,253
* amplification for the the step-up circuit:
changed to
* amplification for the step-up circuit:
Signed-off-by: Jiang Jian <[email protected]>
---
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index 873cbd38e6d3..40ea41b0a5dd 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -190,7 +190,7 @@ struct nt35510_config {
* 6 = Hsync x 2
* 7 = Hsync x 4
* bits 4..6 in the upper nibble controls BTP, the boosting
- * amplification for the the step-up circuit:
+ * amplification for the step-up circuit:
* 0 = Disable
* 1 = 1.5 x VDDB
* 2 = 1.66 x VDDB
@@ -211,7 +211,7 @@ struct nt35510_config {
* bits 0..2 in the lower nibble controls NCK, the booster clock
* frequency, the values are the same as for PCK in @bt1ctr.
* bits 4..5 in the upper nibble controls BTN, the boosting
- * amplification for the the step-up circuit.
+ * amplification for the step-up circuit.
* 0 = Disable
* 1 = -1.5 x VDDB
* 2 = -2 x VDDB
@@ -250,7 +250,7 @@ struct nt35510_config {
* bits 0..2 in the lower nibble controls LCK, the booster clock
* frequency, the values are the same as for PCK in @bt1ctr.
* bits 4..5 in the upper nibble controls BTL, the boosting
- * amplification for the the step-up circuit.
+ * amplification for the step-up circuit.
* 0 = AVEE + VCL
* 1 = AVEE - AVDD
* 2 = AVEE + VCL - AVDD
--
2.17.1
On Tue, Jun 21, 2022 at 10:01:51PM +0800, Jiang Jian wrote:
> file: ./drivers/gpu/drm/panel/panel-novatek-nt35510.c
> line: 193,214,253
> * amplification for the the step-up circuit:
> changed to
> * amplification for the step-up circuit:
>
> Signed-off-by: Jiang Jian <[email protected]>
Thanks, applied to drm-misc (drm-misc-next)
Sam
Hi Jiang,
On Tue, Jun 21, 2022 at 10:01:51PM +0800, Jiang Jian wrote:
> file: ./drivers/gpu/drm/panel/panel-novatek-nt35510.c
> line: 193,214,253
> * amplification for the the step-up circuit:
> changed to
> * amplification for the step-up circuit:
>
> Signed-off-by: Jiang Jian <[email protected]>
Thanks - applied to drm-misc (drm-misc-next).
Sam