From: Yassine Oudjana <[email protected]>
The power cluster comes before the performance cluster. Make
everything in the driver follow this order.
Signed-off-by: Yassine Oudjana <[email protected]>
---
drivers/clk/qcom/clk-cpu-8996.c | 36 ++++++++++++++++-----------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index 217f9392c23d..b6761a74d5ac 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -111,24 +111,24 @@ static const struct alpha_pll_config hfpll_config = {
.early_output_mask = BIT(3),
};
-static struct clk_alpha_pll perfcl_pll = {
- .offset = PERFCL_REG_OFFSET,
+static struct clk_alpha_pll pwrcl_pll = {
+ .offset = PWRCL_REG_OFFSET,
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
- .name = "perfcl_pll",
+ .name = "pwrcl_pll",
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.ops = &clk_alpha_pll_huayra_ops,
},
};
-static struct clk_alpha_pll pwrcl_pll = {
- .offset = PWRCL_REG_OFFSET,
+static struct clk_alpha_pll perfcl_pll = {
+ .offset = PERFCL_REG_OFFSET,
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
- .name = "pwrcl_pll",
+ .name = "perfcl_pll",
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.ops = &clk_alpha_pll_huayra_ops,
@@ -181,28 +181,28 @@ static const struct alpha_pll_config altpll_config = {
.early_output_mask = BIT(3),
};
-static struct clk_alpha_pll perfcl_alt_pll = {
- .offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
+static struct clk_alpha_pll pwrcl_alt_pll = {
+ .offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
- .name = "perfcl_alt_pll",
+ .name = "pwrcl_alt_pll",
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
-static struct clk_alpha_pll pwrcl_alt_pll = {
- .offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
+static struct clk_alpha_pll perfcl_alt_pll = {
+ .offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
- .name = "pwrcl_alt_pll",
+ .name = "perfcl_alt_pll",
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.ops = &clk_alpha_pll_hwfsm_ops,
@@ -367,14 +367,14 @@ static const struct regmap_config cpu_msm8996_regmap_config = {
};
static struct clk_regmap *cpu_msm8996_clks[] = {
- &perfcl_pll.clkr,
&pwrcl_pll.clkr,
- &perfcl_alt_pll.clkr,
+ &perfcl_pll.clkr,
&pwrcl_alt_pll.clkr,
- &perfcl_smux.clkr,
+ &perfcl_alt_pll.clkr,
&pwrcl_smux.clkr,
- &perfcl_pmux.clkr,
+ &perfcl_smux.clkr,
&pwrcl_pmux.clkr,
+ &perfcl_pmux.clkr,
};
static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
@@ -403,10 +403,10 @@ static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
return ret;
}
- clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
- clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
+ clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
+ clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
/* Enable alt PLLs */
clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
--
2.36.1
On Tue, 21 Jun 2022 at 19:07, Yassine Oudjana <[email protected]> wrote:
>
> From: Yassine Oudjana <[email protected]>
>
> The power cluster comes before the performance cluster. Make
> everything in the driver follow this order.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
> ---
> drivers/clk/qcom/clk-cpu-8996.c | 36 ++++++++++++++++-----------------
> 1 file changed, 18 insertions(+), 18 deletions(-)
--
With best wishes
Dmitry