2022-06-22 23:30:01

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 0/6] SM8350 Display/GPU clock enablement

Changes since v2
- Dropped "clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED"
- Dropped "clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable"
- Dropped "clk: qcom: rcg2: Cache rate changes for parked RCGs"

Changes since v3:
- Dropped RBs & SoBs for bigger changes
- Changed author to me for patches with big changes

Changes since v5:
- Reverted dispcc-sm8350 split from dispcc-sm8250
and related .index changes - Bjorn
- Re-added Tags that were thrown out due to the
above revert


Jonathan Marek (2):
clk: qcom: add support for SM8350 DISPCC
dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

Robert Foss (4):
arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
clk: qcom: add support for SM8350 GPUCC
dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
arm64: dts: qcom: sm8350: Add DISPCC node

.../bindings/clock/qcom,dispcc-sm8x50.yaml | 6 +-
.../bindings/clock/qcom,gpucc-sm8350.yaml | 72 ++
arch/arm64/boot/dts/qcom/sm8350.dtsi | 42 +-
drivers/clk/qcom/Kconfig | 14 +-
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/dispcc-sm8250.c | 63 +-
drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++
.../dt-bindings/clock/qcom,dispcc-sm8350.h | 1 +
include/dt-bindings/clock/qcom,gpucc-sm8350.h | 52 ++
9 files changed, 874 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

--
2.34.1


2022-06-22 23:30:21

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 6/6] arm64: dts: qcom: sm8350: Add DISPCC node

Add the dispcc clock-controller DT node for sm8350.

Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---


Changes since v2
- Remove interconnect include - Bjorn

Changes since v3
- Switch from .fw_name to .index

Changes since v5
- Revert .fw_name to .index change

Changes since v6
- Add r-b - Konrad



arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 52428b6df64e..99464cd1299e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -4,6 +4,7 @@
*/

#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
@@ -2525,6 +2526,31 @@ usb_2_dwc3: usb@a800000 {
};
};

+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domain-names = "mmcx";
+ };
+
adsp: remoteproc@17300000 {
compatible = "qcom,sm8350-adsp-pas";
reg = <0 0x17300000 0 0x100>;
--
2.34.1

2022-06-22 23:42:38

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 3/6] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.

Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---

Changes since v3
- Separate from qcom,gpucc
- Remove clock-names
- Make example sm8350 based
- Changed author to me due to size of changes

Changes since v5
- Add Ack - Rob

Changes since v5
- Reverted split from dispcc-sm8250
- Re-added tags from v3


.../bindings/clock/qcom,gpucc-sm8350.yaml | 72 +++++++++++++++++++
include/dt-bindings/clock/qcom,gpucc-sm8350.h | 52 ++++++++++++++
2 files changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
new file mode 100644
index 000000000000..0a0546c079a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+ - Robert Foss <[email protected]>
+
+description: |
+ Qualcomm graphics clock control module which supports the clocks, resets and
+ power domains on Qualcomm SoCs.
+
+ See also:
+ dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8350-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source
+ - description: GPLL0 div branch source
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@3d90000 {
+ compatible = "qcom,sm8350-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,gpucc-sm8350.h b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
new file mode 100644
index 000000000000..2ca857f5bfd2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK 0
+#define GPU_CC_CB_CLK 1
+#define GPU_CC_CRC_AHB_CLK 2
+#define GPU_CC_CX_APB_CLK 3
+#define GPU_CC_CX_GMU_CLK 4
+#define GPU_CC_CX_QDSS_AT_CLK 5
+#define GPU_CC_CX_QDSS_TRIG_CLK 6
+#define GPU_CC_CX_QDSS_TSCTR_CLK 7
+#define GPU_CC_CX_SNOC_DVM_CLK 8
+#define GPU_CC_CXO_AON_CLK 9
+#define GPU_CC_CXO_CLK 10
+#define GPU_CC_FREQ_MEASURE_CLK 11
+#define GPU_CC_GMU_CLK_SRC 12
+#define GPU_CC_GX_GMU_CLK 13
+#define GPU_CC_GX_QDSS_TSCTR_CLK 14
+#define GPU_CC_GX_VSENSE_CLK 15
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 16
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC 17
+#define GPU_CC_HUB_AON_CLK 18
+#define GPU_CC_HUB_CLK_SRC 19
+#define GPU_CC_HUB_CX_INT_CLK 20
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC 21
+#define GPU_CC_MND1X_0_GFX3D_CLK 22
+#define GPU_CC_MND1X_1_GFX3D_CLK 23
+#define GPU_CC_PLL0 24
+#define GPU_CC_PLL1 25
+#define GPU_CC_SLEEP_CLK 26
+
+/* GPU_CC resets */
+#define GPUCC_GPU_CC_ACD_BCR 0
+#define GPUCC_GPU_CC_CB_BCR 1
+#define GPUCC_GPU_CC_CX_BCR 2
+#define GPUCC_GPU_CC_FAST_HUB_BCR 3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR 4
+#define GPUCC_GPU_CC_GMU_BCR 5
+#define GPUCC_GPU_CC_GX_BCR 6
+#define GPUCC_GPU_CC_XO_BCR 7
+
+/* GPU_CC GDSCRs */
+#define GPU_CX_GDSC 0
+#define GPU_GX_GDSC 1
+
+#endif
--
2.34.1

2022-06-23 00:08:38

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines

Replace &rpmhpd power domain integers with their respective defines
in order to improve legibility.

Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---

Changes since v6
- Add r-b - Konrad



arch/arm64/boot/dts/qcom/sm8350.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0137bdcf94b..52428b6df64e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1656,8 +1656,8 @@ mpss: remoteproc@4080000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd 0>,
- <&rpmhpd 12>;
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MSS>;
power-domain-names = "cx", "mss";

interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
@@ -2167,8 +2167,8 @@ slpi: remoteproc@5c00000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd 4>,
- <&rpmhpd 5>;
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
power-domain-names = "lcx", "lmx";

memory-region = <&pil_slpi_mem>;
@@ -2235,8 +2235,8 @@ cdsp: remoteproc@98900000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd 0>,
- <&rpmhpd 10>;
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MXC>;
power-domain-names = "cx", "mxc";

interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
@@ -2540,8 +2540,8 @@ adsp: remoteproc@17300000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd 4>,
- <&rpmhpd 5>;
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
power-domain-names = "lcx", "lmx";

memory-region = <&pil_adsp_mem>;
--
2.34.1

2022-06-23 00:09:30

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 2/6] clk: qcom: add support for SM8350 GPUCC

The GPUCC manages the clocks for the Adreno GPU found on the
sm8350 SoCs.

Signed-off-by: Robert Foss <[email protected]>
Signed-off-by: Jonathan Marek <[email protected]>
---

Changes since v1
- Remove .name assignments for clk_parent_data - Dmitry
- Use ARRAY_SIZE where possible - Dmitry
- Remove commented out code - Dmitry
- Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
- Assign .parent_hws instead of .hw - Dmitry

Changes since v2
- Switch license to dual BSD/GPL - Bjorn
- Add Jonathans SoB - Jonathan
- Add Linaro to copyright statement - Bjorn
- Make .hw.init assignment const - Bjorn
- Extract & deduplicate bi_tcxo parent_data - Bjorn
- Removed further .name assignment - Bjorn
- Move of_device_id declaration - Bjorn

Changes since v3
- Change license to BSD/GPL - Rob/Bjorn
- Switch from .fw_name to .index

Changes since v4
- Change year of copyright statement
- Change to dual license for header file - Rob

Changes since v5
- Change hex to lower case - Konrad

Changes since v6
- Change hex to lower case - Konrad
- Change license go GPL 2.0 only - Konrad


drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
3 files changed, 646 insertions(+)
create mode 100644 drivers/clk/qcom/gpucc-sm8350.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index bc4dcf356d82..b11235c21952 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -712,6 +712,14 @@ config SM_GPUCC_8250
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.

+config SM_GPUCC_8350
+ tristate "SM8350 Graphics Clock Controller"
+ select SM_GCC_8350
+ help
+ Support for the graphics clock controller on SM8350 devices.
+ Say Y if you want to support graphics controller devices and
+ functionality such as 3D graphics.
+
config SM_VIDEOCC_8150
tristate "SM8150 Video Clock Controller"
select SM_GCC_8150
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 36789f5233ef..ef9c64824424 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
new file mode 100644
index 000000000000..d13fa813d190
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm8350.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-divider.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ P_BI_TCXO,
+ P_GPLL0_OUT_MAIN,
+ P_GPLL0_OUT_MAIN_DIV,
+ P_GPU_CC_PLL0_OUT_MAIN,
+ P_GPU_CC_PLL1_OUT_MAIN,
+};
+
+static struct pll_vco lucid_5lpe_vco[] = {
+ { 249600000, 1750000000, 0 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+ .l = 0x18,
+ .alpha = 0x6000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x2a9a699c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000000,
+ .test_ctl_hi1_val = 0x01800000,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static const struct clk_parent_data gpu_cc_parent = {
+ .fw_name = "bi_tcxo",
+};
+
+static struct clk_alpha_pll gpu_cc_pll0 = {
+ .offset = 0x0,
+ .vco_table = lucid_5lpe_vco,
+ .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data){
+ .name = "gpu_cc_pll0",
+ .parent_data = &gpu_cc_parent,
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_5lpe_ops,
+ },
+ },
+};
+
+static const struct alpha_pll_config gpu_cc_pll1_config = {
+ .l = 0x1a,
+ .alpha = 0xaaa,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x2a9a699c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000000,
+ .test_ctl_hi1_val = 0x01800000,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+ .offset = 0x100,
+ .vco_table = lucid_5lpe_vco,
+ .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_pll1",
+ .parent_data = &gpu_cc_parent,
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_5lpe_ops,
+ },
+ },
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL0_OUT_MAIN, 1 },
+ { P_GPU_CC_PLL1_OUT_MAIN, 3 },
+ { P_GPLL0_OUT_MAIN, 5 },
+ { P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+ gpu_cc_parent,
+ { .hw = &gpu_cc_pll0.clkr.hw },
+ { .hw = &gpu_cc_pll1.clkr.hw },
+ { .fw_name = "gcc_gpu_gpll0_clk_src" },
+ { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL1_OUT_MAIN, 3 },
+ { P_GPLL0_OUT_MAIN, 5 },
+ { P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+ gpu_cc_parent,
+ { .hw = &gpu_cc_pll1.clkr.hw },
+ { .fw_name = "gcc_gpu_gpll0_clk_src" },
+ { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
+ F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+ .cmd_rcgr = 0x1120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_0,
+ .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gmu_clk_src",
+ .parent_data = gpu_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
+ F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
+ F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+ F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpu_cc_hub_clk_src = {
+ .cmd_rcgr = 0x117c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_1,
+ .freq_tbl = ftbl_gpu_cc_hub_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_hub_clk_src",
+ .parent_data = gpu_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
+ .reg = 0x11c0,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "gpu_cc_hub_ahb_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
+ .reg = 0x11bc,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "gpu_cc_hub_cx_int_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+ .halt_reg = 0x1078,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cb_clk = {
+ .halt_reg = 0x1170,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1170,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+ .halt_reg = 0x107c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x107c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_crc_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_apb_clk = {
+ .halt_reg = 0x1088,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1088,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_apb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+ .halt_reg = 0x1098,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1098,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_gmu_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_qdss_at_clk = {
+ .halt_reg = 0x1080,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1080,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_qdss_at_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
+ .halt_reg = 0x1094,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1094,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_qdss_trig_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
+ .halt_reg = 0x1084,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1084,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_qdss_tsctr_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+ .halt_reg = 0x108c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x108c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_snoc_dvm_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+ .halt_reg = 0x1004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_aon_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+ .halt_reg = 0x109c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x109c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_freq_measure_clk = {
+ .halt_reg = 0x120c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x120c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_freq_measure_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_gx_gmu_clk = {
+ .halt_reg = 0x1064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1064,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gx_gmu_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
+ .halt_reg = 0x105c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x105c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gx_qdss_tsctr_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_gx_vsense_clk = {
+ .halt_reg = 0x1058,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gx_vsense_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+ .halt_reg = 0x5000,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_hub_aon_clk = {
+ .halt_reg = 0x1178,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1178,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_hub_aon_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_hub_cx_int_clk = {
+ .halt_reg = 0x1204,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1204,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_hub_cx_int_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
+ .halt_reg = 0x802c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x802c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_mnd1x_0_gfx3d_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
+ .halt_reg = 0x8030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8030,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_mnd1x_1_gfx3d_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+ .halt_reg = 0x1090,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1090,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc gpu_cx_gdsc = {
+ .gdscr = 0x106c,
+ .gds_hw_ctrl = 0x1540,
+ .pd = {
+ .name = "gpu_cx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+ .gdscr = 0x100c,
+ .clamp_io_ctrl = 0x1508,
+ .pd = {
+ .name = "gpu_gx_gdsc",
+ .power_on = gdsc_gx_do_nothing_enable,
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
+};
+
+static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
+ [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+ [GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
+ [GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+ [GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
+ [GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+ [GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
+ [GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
+ [GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
+ [GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+ [GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+ [GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+ [GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
+ [GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+ [GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
+ [GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
+ [GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
+ [GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+ [GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
+ [GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
+ [GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
+ [GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
+ [GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
+ [GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
+ [GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
+ [GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+ [GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
+ [GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
+ [GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
+ [GPUCC_GPU_CC_CB_BCR] = { 0x116c },
+ [GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
+ [GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
+ [GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
+ [GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
+ [GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
+ [GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
+};
+
+static struct gdsc *gpu_cc_sm8350_gdscs[] = {
+ [GPU_CX_GDSC] = &gpu_cx_gdsc,
+ [GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_sm8350_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x8030,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
+ .config = &gpu_cc_sm8350_regmap_config,
+ .clks = gpu_cc_sm8350_clocks,
+ .num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
+ .resets = gpu_cc_sm8350_resets,
+ .num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
+ .gdscs = gpu_cc_sm8350_gdscs,
+ .num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
+};
+
+static int gpu_cc_sm8350_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
+ if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
+ return PTR_ERR(regmap);
+ }
+
+ clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+ clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
+
+ return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
+}
+
+static const struct of_device_id gpu_cc_sm8350_match_table[] = {
+ { .compatible = "qcom,sm8350-gpucc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
+
+static struct platform_driver gpu_cc_sm8350_driver = {
+ .probe = gpu_cc_sm8350_probe,
+ .driver = {
+ .name = "sm8350-gpucc",
+ .of_match_table = gpu_cc_sm8350_match_table,
+ },
+};
+
+static int __init gpu_cc_sm8350_init(void)
+{
+ return platform_driver_register(&gpu_cc_sm8350_driver);
+}
+subsys_initcall(gpu_cc_sm8350_init);
+
+static void __exit gpu_cc_sm8350_exit(void)
+{
+ platform_driver_unregister(&gpu_cc_sm8350_driver);
+}
+module_exit(gpu_cc_sm8350_exit);
+
+MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
+MODULE_LICENSE("GPL v2");
--
2.34.1

2022-06-23 00:11:31

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

From: Jonathan Marek <[email protected]>

Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.

Signed-off-by: Jonathan Marek <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
---


Changes since v2
- Add SoB - Bjorn

Changes since v3
- Separate from qcom,dispcc-sm8x50
- Remove clock-names
- Make example sm8350 based
- Changed author to me due to size of changes

Changes since v4
- Add RB - Rob

Changes since v5
- Reverted split from dispcc-sm8250
- Re-added tags from v3



.../devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 6 ++++--
include/dt-bindings/clock/qcom,dispcc-sm8350.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 31497677e8de..7a8d375e055e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350

maintainers:
- Jonathan Marek <[email protected]>

description: |
Qualcomm display clock control module which supports the clocks, resets and
- power domains on SM8150 and SM8250.
+ power domains on SM8150/SM8250/SM8350.

See also:
dt-bindings/clock/qcom,dispcc-sm8150.h
dt-bindings/clock/qcom,dispcc-sm8250.h
+ dt-bindings/clock/qcom,dispcc-sm8350.h

properties:
compatible:
@@ -23,6 +24,7 @@ properties:
- qcom,sc8180x-dispcc
- qcom,sm8150-dispcc
- qcom,sm8250-dispcc
+ - qcom,sm8350-dispcc

clocks:
items:
diff --git a/include/dt-bindings/clock/qcom,dispcc-sm8350.h b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
new file mode 120000
index 000000000000..0312b4544acb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
@@ -0,0 +1 @@
+qcom,dispcc-sm8250.h
\ No newline at end of file
--
2.34.1

2022-06-23 00:22:14

by Robert Foss

[permalink] [raw]
Subject: [PATCH v7 4/6] clk: qcom: add support for SM8350 DISPCC

From: Jonathan Marek <[email protected]>

Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.

Signed-off-by: Jonathan Marek <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
---

Changes since v1
- Remove comment - Dmitry

Changes since v2
- Add my SoB - Bjorn
- Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag

Changes since v3
- Add kconfig dependency on SM_GCC_8350 - Konrad
- Change hex to lowercase - Konrad
- Split from dispcc-sm8250.c implementation
- Switch from .fw_name to .index

Changes since v4
- Hex to lowercase - Konrad
- Remove bad match table entries - Konrad

Changes since v5
- Reverted split from dispcc-sm8250
- Re-added tags from v3

Changes since v6
- Added kconfig dependency - Konrad
- Don't remove comment - Konrad


drivers/clk/qcom/Kconfig | 6 +--
drivers/clk/qcom/dispcc-sm8250.c | 63 +++++++++++++++++++++++++++++++-
2 files changed, 65 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index b11235c21952..efdef8fbf008 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -618,11 +618,11 @@ config SM_DISPCC_6125
splash screen

config SM_DISPCC_8250
- tristate "SM8150 and SM8250 Display Clock Controller"
- depends on SM_GCC_8150 || SM_GCC_8250
+ tristate "SM8150/SM8250/SM8350 Display Clock Controller"
+ depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
help
Support for the display clock controller on Qualcomm Technologies, Inc
- SM8150 and SM8250 devices.
+ SM8150/SM8250/SM8350 devices.
Say Y if you want to support display devices and functionality such as
splash screen.

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index db9379634fb2..39b344ebb049 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
{ 249600000, 2000000000, 0 },
};

+static struct pll_vco lucid_5lpe_vco[] = {
+ { 249600000, 1750000000, 0 },
+};
+
static struct alpha_pll_config disp_cc_pll0_config = {
.l = 0x47,
.alpha = 0xE000,
@@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
{ .compatible = "qcom,sc8180x-dispcc" },
{ .compatible = "qcom,sm8150-dispcc" },
{ .compatible = "qcom,sm8250-dispcc" },
+ { .compatible = "qcom,sm8350-dispcc" },
{ }
};
MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
@@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
return PTR_ERR(regmap);
}

- /* note: trion == lucid, except for the prepare() op */
+ /* Apply differences for SM8150 and SM8350 */
BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
@@ -1270,6 +1275,62 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+ } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
+ static struct clk_rcg2 * const rcgs[] = {
+ &disp_cc_mdss_byte0_clk_src,
+ &disp_cc_mdss_byte1_clk_src,
+ &disp_cc_mdss_dp_aux1_clk_src,
+ &disp_cc_mdss_dp_aux_clk_src,
+ &disp_cc_mdss_dp_link1_clk_src,
+ &disp_cc_mdss_dp_link_clk_src,
+ &disp_cc_mdss_dp_pixel1_clk_src,
+ &disp_cc_mdss_dp_pixel2_clk_src,
+ &disp_cc_mdss_dp_pixel_clk_src,
+ &disp_cc_mdss_esc0_clk_src,
+ &disp_cc_mdss_mdp_clk_src,
+ &disp_cc_mdss_pclk0_clk_src,
+ &disp_cc_mdss_pclk1_clk_src,
+ &disp_cc_mdss_rot_clk_src,
+ &disp_cc_mdss_vsync_clk_src,
+ };
+ static struct clk_regmap_div * const divs[] = {
+ &disp_cc_mdss_byte0_div_clk_src,
+ &disp_cc_mdss_byte1_div_clk_src,
+ &disp_cc_mdss_dp_link1_div_clk_src,
+ &disp_cc_mdss_dp_link_div_clk_src,
+ };
+ unsigned int i;
+ static bool offset_applied;
+
+ /*
+ * note: trion == lucid, except for the prepare() op
+ * only apply the offsets once (in case of deferred probe)
+ */
+ if (!offset_applied) {
+ for (i = 0; i < ARRAY_SIZE(rcgs); i++)
+ rcgs[i]->cmd_rcgr -= 4;
+
+ for (i = 0; i < ARRAY_SIZE(divs); i++) {
+ divs[i]->reg -= 4;
+ divs[i]->width = 4;
+ }
+
+ disp_cc_mdss_ahb_clk.halt_reg -= 4;
+ disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
+
+ offset_applied = true;
+ }
+
+ disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
+
+ disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
+ disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
+ disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+ disp_cc_pll0.vco_table = lucid_5lpe_vco;
+ disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
+ disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
+ disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+ disp_cc_pll1.vco_table = lucid_5lpe_vco;
}

clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
--
2.34.1

2022-06-23 04:52:18

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v7 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines

On 23-06-22, 01:28, Robert Foss wrote:
> Replace &rpmhpd power domain integers with their respective defines
> in order to improve legibility.


Reviewed-by: Vinod Koul <[email protected]>

This can go separately as well...

--
~Vinod

2022-06-23 05:06:30

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v7 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

On 23-06-22, 01:28, Robert Foss wrote:
> From: Jonathan Marek <[email protected]>
>
> Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
> bindings. Update the documentation with the new compatible.

Reviewed-by: Vinod Koul <[email protected]>

But, this should be patch 2, before the driver one please

--
~Vinod

2022-06-23 05:06:39

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v7 4/6] clk: qcom: add support for SM8350 DISPCC

On 23-06-22, 01:28, Robert Foss wrote:
> From: Jonathan Marek <[email protected]>
>
> Add support to the SM8350 display clock controller by extending the SM8250
> display clock controller, which is almost identical but has some minor
> differences.

Reviewed-by: Vinod Koul <[email protected]>

--
~Vinod

2022-06-23 05:13:38

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v7 2/6] clk: qcom: add support for SM8350 GPUCC

On 23-06-22, 01:28, Robert Foss wrote:
> The GPUCC manages the clocks for the Adreno GPU found on the
> sm8350 SoCs.
>
> Signed-off-by: Robert Foss <[email protected]>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
>
> Changes since v1
> - Remove .name assignments for clk_parent_data - Dmitry
> - Use ARRAY_SIZE where possible - Dmitry
> - Remove commented out code - Dmitry
> - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
> - Assign .parent_hws instead of .hw - Dmitry
>
> Changes since v2
> - Switch license to dual BSD/GPL - Bjorn
> - Add Jonathans SoB - Jonathan
> - Add Linaro to copyright statement - Bjorn
> - Make .hw.init assignment const - Bjorn
> - Extract & deduplicate bi_tcxo parent_data - Bjorn
> - Removed further .name assignment - Bjorn
> - Move of_device_id declaration - Bjorn
>
> Changes since v3
> - Change license to BSD/GPL - Rob/Bjorn
> - Switch from .fw_name to .index
>
> Changes since v4
> - Change year of copyright statement
> - Change to dual license for header file - Rob
>
> Changes since v5
> - Change hex to lower case - Konrad
>
> Changes since v6
> - Change hex to lower case - Konrad
> - Change license go GPL 2.0 only - Konrad
>
>
> drivers/clk/qcom/Kconfig | 8 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
> 3 files changed, 646 insertions(+)
> create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index bc4dcf356d82..b11235c21952 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -712,6 +712,14 @@ config SM_GPUCC_8250
> Say Y if you want to support graphics controller devices and
> functionality such as 3D graphics.
>
> +config SM_GPUCC_8350
> + tristate "SM8350 Graphics Clock Controller"
> + select SM_GCC_8350
> + help
> + Support for the graphics clock controller on SM8350 devices.
> + Say Y if you want to support graphics controller devices and
> + functionality such as 3D graphics.
> +
> config SM_VIDEOCC_8150
> tristate "SM8150 Video Clock Controller"
> select SM_GCC_8150
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 36789f5233ef..ef9c64824424 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
> obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
> obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
> obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> +obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
> obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
> obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
> obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
> new file mode 100644
> index 000000000000..d13fa813d190
> --- /dev/null
> +++ b/drivers/clk/qcom/gpucc-sm8350.c
> @@ -0,0 +1,637 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "common.h"
> +#include "clk-regmap-mux.h"
> +#include "clk-regmap-divider.h"
> +#include "gdsc.h"
> +#include "reset.h"

nit: this could be sorted alphabetically. Otherwise looks good to me

Reviewed-by: Vinod Koul <[email protected]>

--
~Vinod