Add helper macros for synchronous stack-allocated Surface Aggregator
request with both argument and return value, similar to the current
argument-only and return-value-only ones.
Signed-off-by: Maximilian Luz <[email protected]>
---
include/linux/surface_aggregator/controller.h | 125 ++++++++++++++++++
include/linux/surface_aggregator/device.h | 36 +++++
2 files changed, 161 insertions(+)
diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h
index 50a2b4926c06..d11a1c6e3186 100644
--- a/include/linux/surface_aggregator/controller.h
+++ b/include/linux/surface_aggregator/controller.h
@@ -469,6 +469,67 @@ struct ssam_request_spec_md {
return 0; \
}
+/**
+ * SSAM_DEFINE_SYNC_REQUEST_WR() - Define synchronous SAM request function with
+ * both argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. The generated function takes care of setting up the request
+ * and response structs, buffer allocation, as well as execution of the request
+ * itself, returning once the request has been fully completed. The required
+ * transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct
+ * ssam_controller *ctrl, const atype *arg, rtype *ret)``, returning the status
+ * of the request, which is zero on success and negative on failure. The
+ * ``ctrl`` parameter is the controller via which the request is sent. The
+ * request argument is specified via the ``arg`` pointer. The request's return
+ * value is written to the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_WR(name, atype, rtype, spec...) \
+ static int name(struct ssam_controller *ctrl, const atype *arg, rtype *ret) \
+ { \
+ struct ssam_request_spec s = (struct ssam_request_spec)spec; \
+ struct ssam_request rqst; \
+ struct ssam_response rsp; \
+ int status; \
+ \
+ rqst.target_category = s.target_category; \
+ rqst.target_id = s.target_id; \
+ rqst.command_id = s.command_id; \
+ rqst.instance_id = s.instance_id; \
+ rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \
+ rqst.length = sizeof(atype); \
+ rqst.payload = (u8 *)arg; \
+ \
+ rsp.capacity = sizeof(rtype); \
+ rsp.length = 0; \
+ rsp.pointer = (u8 *)ret; \
+ \
+ status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \
+ if (status) \
+ return status; \
+ \
+ if (rsp.length != sizeof(rtype)) { \
+ struct device *dev = ssam_controller_device(ctrl); \
+ dev_err(dev, \
+ "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \
+ sizeof(rtype), rsp.length, rqst.target_category,\
+ rqst.command_id); \
+ return -EIO; \
+ } \
+ \
+ return 0; \
+ }
+
/**
* SSAM_DEFINE_SYNC_REQUEST_MD_N() - Define synchronous multi-device SAM
* request function with neither argument nor return value.
@@ -613,6 +674,70 @@ struct ssam_request_spec_md {
return 0; \
}
+/**
+ * SSAM_DEFINE_SYNC_REQUEST_MD_WR() - Define synchronous multi-device SAM
+ * request function with both argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec_md) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. Device specifying parameters are not hard-coded, but instead
+ * must be provided to the function. The generated function takes care of
+ * setting up the request and response structs, buffer allocation, as well as
+ * execution of the request itself, returning once the request has been fully
+ * completed. The required transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct
+ * ssam_controller *ctrl, u8 tid, u8 iid, const atype *arg, rtype *ret)``,
+ * returning the status of the request, which is zero on success and negative
+ * on failure. The ``ctrl`` parameter is the controller via which the request
+ * is sent, ``tid`` the target ID for the request, and ``iid`` the instance ID.
+ * The request argument is specified via the ``arg`` pointer. The request's
+ * return value is written to the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_MD_WR(name, atype, rtype, spec...) \
+ static int name(struct ssam_controller *ctrl, u8 tid, u8 iid, \
+ const atype *arg, rtype *ret) \
+ { \
+ struct ssam_request_spec_md s = (struct ssam_request_spec_md)spec; \
+ struct ssam_request rqst; \
+ struct ssam_response rsp; \
+ int status; \
+ \
+ rqst.target_category = s.target_category; \
+ rqst.target_id = tid; \
+ rqst.command_id = s.command_id; \
+ rqst.instance_id = iid; \
+ rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \
+ rqst.length = sizeof(atype); \
+ rqst.payload = (u8 *)arg; \
+ \
+ rsp.capacity = sizeof(rtype); \
+ rsp.length = 0; \
+ rsp.pointer = (u8 *)ret; \
+ \
+ status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \
+ if (status) \
+ return status; \
+ \
+ if (rsp.length != sizeof(rtype)) { \
+ struct device *dev = ssam_controller_device(ctrl); \
+ dev_err(dev, \
+ "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \
+ sizeof(rtype), rsp.length, rqst.target_category,\
+ rqst.command_id); \
+ return -EIO; \
+ } \
+ \
+ return 0; \
+ }
+
/* -- Event notifier/callbacks. --------------------------------------------- */
diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index c418f7f2732d..6cf7e80312d5 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -483,6 +483,42 @@ static inline void ssam_remove_clients(struct device *dev) {}
sdev->uid.instance, ret); \
}
+/**
+ * SSAM_DEFINE_SYNC_REQUEST_CL_WR() - Define synchronous client-device SAM
+ * request function with argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec_md) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. Device specifying parameters are not hard-coded, but instead
+ * are provided via the client device, specifically its UID, supplied when
+ * calling this function. The generated function takes care of setting up the
+ * request struct, buffer allocation, as well as execution of the request
+ * itself, returning once the request has been fully completed. The required
+ * transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct ssam_device
+ * *sdev, const atype *arg, rtype *ret)``, returning the status of the request,
+ * which is zero on success and negative on failure. The ``sdev`` parameter
+ * specifies both the target device of the request and by association the
+ * controller via which the request is sent. The request's argument is
+ * specified via the ``arg`` pointer. The request's return value is written to
+ * the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_CL_WR(name, atype, rtype, spec...) \
+ SSAM_DEFINE_SYNC_REQUEST_MD_WR(__raw_##name, atype, rtype, spec) \
+ static int name(struct ssam_device *sdev, const atype *arg, rtype *ret) \
+ { \
+ return __raw_##name(sdev->ctrl, sdev->uid.target, \
+ sdev->uid.instance, arg, ret); \
+ }
+
/* -- Helpers for client-device notifiers. ---------------------------------- */
--
2.36.1