This is a follow-up to the series "[PATCH v2 0/2] Add PLIC support for
Renesas RZ/Five SoC"[1].
The change made there is also needed for the already-supported T-HEAD
C9xx PLIC. So this binding change is necessary before I can send the
Allwinner D1 devicetree.
[1]: https://lore.kernel.org/linux-riscv/[email protected]/T/
Changes in v1:
- Use a flag for enabling the changes instead of a variant ID
- Use handle_edge_irq instead of handle_fasteoi_ack_irq
- Do not set the handler name, as RISC-V selects GENERIC_IRQ_SHOW_LEVEL
Samuel Holland (3):
dt-bindings: interrupt-controller: Require trigger type for T-HEAD
PLIC
irqchip/sifive-plic: Name the chip more generically
irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
.../sifive,plic-1.0.0.yaml | 31 ++++++-
drivers/irqchip/irq-sifive-plic.c | 91 +++++++++++++++++--
2 files changed, 108 insertions(+), 14 deletions(-)
--
2.35.1