The is31fl3190, is31fl3191 and is31fl3193 chips (1 or 3 PWM channels)
cannot be handled the same as is31fl3196 and is31fl3199,
if only because the register map is different.
Also:
- the software shutdown bit is reversed
- and additional field needs to be set to enable all channels
- the led-max-microamp current values and setting are not the same
Datasheets:
https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
This series:
- converts dt-bindings to dtschema, adding all si-en compatibles
for convenience and consistency, and adding constraints on
supported values for eg. reg address and led-max-microamp
- changes vars, structs and defines to not use 319X suffix
but 3190 for 319{0,1,3} and 3196 for 319{6,9}
- adds fields in chipdef struct for chip-specific values
- only in the last patch, adds is31fl319{0,1,3} specific values
so those chips can work.
Tested on msm8916-alcatel-idol347, which probably has an
is31fl3190 or is31fl3191 (only one white led indicator).
Vincent Knecht (7):
dt-bindings: leds: Convert is31fl319x to dtschema
dt-bindings: leds: is31fl319x: Add missing si-en compatibles
leds: is31fl319x: Add missing si-en compatibles
dt-bindings: leds: is31fl319x: Document variants specificities
leds: is31fl319x: Use non-wildcard names for vars, structs and defines
leds: is31fl319x: Move chipset-specific values in chipdef struct
leds: is31fl319x: Add support for is31fl319{0,1,3} chips
.../bindings/leds/issi,is31fl319x.yaml | 193 +++++++++
.../bindings/leds/leds-is31fl319x.txt | 61 ---
drivers/leds/leds-is31fl319x.c | 406 +++++++++++++-----
3 files changed, 488 insertions(+), 172 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
--
2.35.3
Convert leds-is31fl319x.txt to dtschema.
Set license to the one recommended by DT project.
Signed-off-by: Vincent Knecht <[email protected]>
---
.../bindings/leds/issi,is31fl319x.yaml | 113 ++++++++++++++++++
.../bindings/leds/leds-is31fl319x.txt | 61 ----------
2 files changed, 113 insertions(+), 61 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 000000000000..0d684aeeb8cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9}
+
+maintainers:
+ - Vincent Knecht <[email protected]>
+
+description: |
+ The IS31FL319X are LED controllers with I2C interface.
+ Previously known as Si-En SN319{0,1,3,6,9}.
+
+ For more product information please see the links below:
+ https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+ https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+ https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+ https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+ https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+ compatible:
+ enum:
+ - issi,is31fl3190
+ - issi,is31fl3191
+ - issi,is31fl3193
+ - issi,is31fl3196
+ - issi,is31fl3199
+ - si-en,sn3199
+
+ reg:
+ maxItems: 1
+
+ shutdown-gpios:
+ maxItems: 1
+ description: GPIO attached to the SDB pin.
+
+ audio-gain-db:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ description: Audio gain selection for external analog modulation input.
+ enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[1-9]$":
+ type: object
+ $ref: common.yaml#
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 1
+ maximum: 9
+
+ led-max-microamp:
+ default: 20000
+ enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+ description:
+ Note that a driver will take the lowest of all LED limits
+ since the chip has a single global setting. The lowest value
+ will be chosen due to the PWM specificity, where lower
+ brightness is achieved by reducing the duty-cycle of pulses
+ and not the current, which will always have its peak value
+ equal to led-max-microamp.
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@65 {
+ compatible = "issi,is31fl3196";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+ led@1 {
+ reg = <1>;
+ label = "red:aux";
+ led-max-microamp = <10000>;
+ };
+
+ led@5 {
+ reg = <5>;
+ label = "green:power";
+ linux,default-trigger = "default-on";
+ };
+ };
+ };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index 676d43ec8169..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
- "issi,is31fl3190"
- "issi,is31fl3191"
- "issi,is31fl3193"
- "issi,is31fl3196"
- "issi,is31fl3199"
- "si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
- Valid values: 0 - 21, step by 3 (rounded down)
- Default: 0
-- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
- Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
- see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
- Valid values: 5000 - 40000, step by 5000 (rounded down)
- Default: 20000 (20 mA)
- Note: a driver will take the lowest of all led limits since the
- chip has a single global setting. The lowest value will be chosen
- due to the PWM specificity, where lower brightness is achieved
- by reducing the dury-cycle of pulses and not the current, which
- will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
- compatible = "issi,is31fl3196";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x65>;
- shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-
- red_aux: led@1 {
- label = "red:aux";
- reg = <1>;
- led-max-microamp = <10000>;
- };
-
- green_power: led@5 {
- label = "green:power";
- reg = <5>;
- linux,default-trigger = "default-on";
- };
-};
--
2.35.3
Add si-en compatibles for all chip variants.
Signed-off-by: Vincent Knecht <[email protected]>
---
Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
index 0d684aeeb8cd..155df2e5cbd5 100644
--- a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -28,6 +28,10 @@ properties:
- issi,is31fl3193
- issi,is31fl3196
- issi,is31fl3199
+ - si-en,sn3190
+ - si-en,sn3191
+ - si-en,sn3193
+ - si-en,sn3196
- si-en,sn3199
reg:
--
2.35.3
In order to add real support for is31fl3190, is31fl3191 and is31fl3193,
rename variant-dependent elements to not use 319X where needed.
3190 suffix is used for is31fl3190, is31fl3191 and is31fl3193 circuits.
3196 suffix is used for is31fl3196 and is31fl3199.
Those two groups have different register maps, current settings and even
a different interpretation of the software shutdown bit:
https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
Rename variables, stuctures and defines in preparation of the splitting.
No functional nor behaviour change.
Signed-off-by: Vincent Knecht <[email protected]>
---
drivers/leds/leds-is31fl319x.c | 142 ++++++++++++++++-----------------
1 file changed, 71 insertions(+), 71 deletions(-)
diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index 0db5d4988131..1dd5c3d4ad74 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -21,39 +21,39 @@
/* register numbers */
#define IS31FL319X_SHUTDOWN 0x00
-#define IS31FL319X_CTRL1 0x01
-#define IS31FL319X_CTRL2 0x02
-#define IS31FL319X_CONFIG1 0x03
-#define IS31FL319X_CONFIG2 0x04
-#define IS31FL319X_RAMP_MODE 0x05
-#define IS31FL319X_BREATH_MASK 0x06
-#define IS31FL319X_PWM(channel) (0x07 + channel)
-#define IS31FL319X_DATA_UPDATE 0x10
-#define IS31FL319X_T0(channel) (0x11 + channel)
-#define IS31FL319X_T123_1 0x1a
-#define IS31FL319X_T123_2 0x1b
-#define IS31FL319X_T123_3 0x1c
-#define IS31FL319X_T4(channel) (0x1d + channel)
-#define IS31FL319X_TIME_UPDATE 0x26
-#define IS31FL319X_RESET 0xff
-
-#define IS31FL319X_REG_CNT (IS31FL319X_RESET + 1)
+#define IS31FL3196_CTRL1 0x01
+#define IS31FL3196_CTRL2 0x02
+#define IS31FL3196_CONFIG1 0x03
+#define IS31FL3196_CONFIG2 0x04
+#define IS31FL3196_RAMP_MODE 0x05
+#define IS31FL3196_BREATH_MASK 0x06
+#define IS31FL3196_PWM(channel) (0x07 + channel)
+#define IS31FL3196_DATA_UPDATE 0x10
+#define IS31FL3196_T0(channel) (0x11 + channel)
+#define IS31FL3196_T123_1 0x1a
+#define IS31FL3196_T123_2 0x1b
+#define IS31FL3196_T123_3 0x1c
+#define IS31FL3196_T4(channel) (0x1d + channel)
+#define IS31FL3196_TIME_UPDATE 0x26
+#define IS31FL3196_RESET 0xff
+
+#define IS31FL3196_REG_CNT (IS31FL3196_RESET + 1)
#define IS31FL319X_MAX_LEDS 9
/* CS (Current Setting) in CONFIG2 register */
-#define IS31FL319X_CONFIG2_CS_SHIFT 4
-#define IS31FL319X_CONFIG2_CS_MASK 0x7
-#define IS31FL319X_CONFIG2_CS_STEP_REF 12
+#define IS31FL3196_CONFIG2_CS_SHIFT 4
+#define IS31FL3196_CONFIG2_CS_MASK 0x7
+#define IS31FL3196_CONFIG2_CS_STEP_REF 12
-#define IS31FL319X_CURRENT_MIN ((u32)5000)
-#define IS31FL319X_CURRENT_MAX ((u32)40000)
-#define IS31FL319X_CURRENT_STEP ((u32)5000)
-#define IS31FL319X_CURRENT_DEFAULT ((u32)20000)
+#define IS31FL3196_CURRENT_MIN ((u32)5000)
+#define IS31FL3196_CURRENT_MAX ((u32)40000)
+#define IS31FL3196_CURRENT_STEP ((u32)5000)
+#define IS31FL3196_CURRENT_DEFAULT ((u32)20000)
/* Audio gain in CONFIG2 register */
-#define IS31FL319X_AUDIO_GAIN_DB_MAX ((u32)21)
-#define IS31FL319X_AUDIO_GAIN_DB_STEP ((u32)3)
+#define IS31FL3196_AUDIO_GAIN_DB_MAX ((u32)21)
+#define IS31FL3196_AUDIO_GAIN_DB_STEP ((u32)3)
/*
* regmap is used as a cache of chip's register space,
@@ -111,7 +111,7 @@ static const struct of_device_id of_is31fl319x_match[] = {
};
MODULE_DEVICE_TABLE(of, of_is31fl319x_match);
-static int is31fl319x_brightness_set(struct led_classdev *cdev,
+static int is31fl3196_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led,
@@ -127,7 +127,7 @@ static int is31fl319x_brightness_set(struct led_classdev *cdev,
mutex_lock(&is31->lock);
/* update PWM register */
- ret = regmap_write(is31->regmap, IS31FL319X_PWM(chan), brightness);
+ ret = regmap_write(is31->regmap, IS31FL3196_PWM(chan), brightness);
if (ret < 0)
goto out;
@@ -141,7 +141,7 @@ static int is31fl319x_brightness_set(struct led_classdev *cdev,
* the current setting, we read from the regmap cache
*/
- ret = regmap_read(is31->regmap, IS31FL319X_PWM(i), &pwm_value);
+ ret = regmap_read(is31->regmap, IS31FL3196_PWM(i), &pwm_value);
dev_dbg(&is31->client->dev, "%s read %d: ret=%d: %d\n",
__func__, i, ret, pwm_value);
on = ret >= 0 && pwm_value > LED_OFF;
@@ -157,10 +157,10 @@ static int is31fl319x_brightness_set(struct led_classdev *cdev,
if (ctrl1 > 0 || ctrl2 > 0) {
dev_dbg(&is31->client->dev, "power up %02x %02x\n",
ctrl1, ctrl2);
- regmap_write(is31->regmap, IS31FL319X_CTRL1, ctrl1);
- regmap_write(is31->regmap, IS31FL319X_CTRL2, ctrl2);
+ regmap_write(is31->regmap, IS31FL3196_CTRL1, ctrl1);
+ regmap_write(is31->regmap, IS31FL3196_CTRL2, ctrl2);
/* update PWMs */
- regmap_write(is31->regmap, IS31FL319X_DATA_UPDATE, 0x00);
+ regmap_write(is31->regmap, IS31FL3196_DATA_UPDATE, 0x00);
/* enable chip from shut down */
ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01);
} else {
@@ -190,14 +190,14 @@ static int is31fl319x_parse_child_dt(const struct device *dev,
if (ret < 0 && ret != -EINVAL) /* is optional */
return ret;
- led->max_microamp = IS31FL319X_CURRENT_DEFAULT;
+ led->max_microamp = IS31FL3196_CURRENT_DEFAULT;
ret = of_property_read_u32(child, "led-max-microamp",
&led->max_microamp);
if (!ret) {
- if (led->max_microamp < IS31FL319X_CURRENT_MIN)
+ if (led->max_microamp < IS31FL3196_CURRENT_MIN)
return -EINVAL; /* not supported */
led->max_microamp = min(led->max_microamp,
- IS31FL319X_CURRENT_MAX);
+ IS31FL3196_CURRENT_MAX);
}
return 0;
@@ -271,7 +271,7 @@ static int is31fl319x_parse_dt(struct device *dev,
ret = of_property_read_u32(np, "audio-gain-db", &is31->audio_gain_db);
if (!ret)
is31->audio_gain_db = min(is31->audio_gain_db,
- IS31FL319X_AUDIO_GAIN_DB_MAX);
+ IS31FL3196_AUDIO_GAIN_DB_MAX);
return 0;
@@ -285,55 +285,55 @@ static bool is31fl319x_readable_reg(struct device *dev, unsigned int reg)
return false;
}
-static bool is31fl319x_volatile_reg(struct device *dev, unsigned int reg)
+static bool is31fl3196_volatile_reg(struct device *dev, unsigned int reg)
{ /* volatile registers are not cached */
switch (reg) {
- case IS31FL319X_DATA_UPDATE:
- case IS31FL319X_TIME_UPDATE:
- case IS31FL319X_RESET:
+ case IS31FL3196_DATA_UPDATE:
+ case IS31FL3196_TIME_UPDATE:
+ case IS31FL3196_RESET:
return true; /* always write-through */
default:
return false;
}
}
-static const struct reg_default is31fl319x_reg_defaults[] = {
- { IS31FL319X_CONFIG1, 0x00},
- { IS31FL319X_CONFIG2, 0x00},
- { IS31FL319X_PWM(0), 0x00},
- { IS31FL319X_PWM(1), 0x00},
- { IS31FL319X_PWM(2), 0x00},
- { IS31FL319X_PWM(3), 0x00},
- { IS31FL319X_PWM(4), 0x00},
- { IS31FL319X_PWM(5), 0x00},
- { IS31FL319X_PWM(6), 0x00},
- { IS31FL319X_PWM(7), 0x00},
- { IS31FL319X_PWM(8), 0x00},
+static const struct reg_default is31fl3196_reg_defaults[] = {
+ { IS31FL3196_CONFIG1, 0x00},
+ { IS31FL3196_CONFIG2, 0x00},
+ { IS31FL3196_PWM(0), 0x00},
+ { IS31FL3196_PWM(1), 0x00},
+ { IS31FL3196_PWM(2), 0x00},
+ { IS31FL3196_PWM(3), 0x00},
+ { IS31FL3196_PWM(4), 0x00},
+ { IS31FL3196_PWM(5), 0x00},
+ { IS31FL3196_PWM(6), 0x00},
+ { IS31FL3196_PWM(7), 0x00},
+ { IS31FL3196_PWM(8), 0x00},
};
-static struct regmap_config regmap_config = {
+static struct regmap_config is31fl3196_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = IS31FL319X_REG_CNT,
+ .max_register = IS31FL3196_REG_CNT,
.cache_type = REGCACHE_FLAT,
.readable_reg = is31fl319x_readable_reg,
- .volatile_reg = is31fl319x_volatile_reg,
- .reg_defaults = is31fl319x_reg_defaults,
- .num_reg_defaults = ARRAY_SIZE(is31fl319x_reg_defaults),
+ .volatile_reg = is31fl3196_volatile_reg,
+ .reg_defaults = is31fl3196_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(is31fl3196_reg_defaults),
};
-static inline int is31fl319x_microamp_to_cs(struct device *dev, u32 microamp)
+static inline int is31fl3196_microamp_to_cs(struct device *dev, u32 microamp)
{ /* round down to nearest supported value (range check done by caller) */
- u32 step = microamp / IS31FL319X_CURRENT_STEP;
+ u32 step = microamp / IS31FL3196_CURRENT_STEP;
- return ((IS31FL319X_CONFIG2_CS_STEP_REF - step) &
- IS31FL319X_CONFIG2_CS_MASK) <<
- IS31FL319X_CONFIG2_CS_SHIFT; /* CS encoding */
+ return ((IS31FL3196_CONFIG2_CS_STEP_REF - step) &
+ IS31FL3196_CONFIG2_CS_MASK) <<
+ IS31FL3196_CONFIG2_CS_SHIFT; /* CS encoding */
}
-static inline int is31fl319x_db_to_gain(u32 dezibel)
+static inline int is31fl3196_db_to_gain(u32 dezibel)
{ /* round down to nearest supported value (range check done by caller) */
- return dezibel / IS31FL319X_AUDIO_GAIN_DB_STEP;
+ return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP;
}
static int is31fl319x_probe(struct i2c_client *client,
@@ -343,7 +343,7 @@ static int is31fl319x_probe(struct i2c_client *client,
struct device *dev = &client->dev;
int err;
int i = 0;
- u32 aggregated_led_microamp = IS31FL319X_CURRENT_MAX;
+ u32 aggregated_led_microamp = IS31FL3196_CURRENT_MAX;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -EIO;
@@ -365,7 +365,7 @@ static int is31fl319x_probe(struct i2c_client *client,
}
is31->client = client;
- is31->regmap = devm_regmap_init_i2c(client, ®map_config);
+ is31->regmap = devm_regmap_init_i2c(client, &is31fl3196_regmap_config);
if (IS_ERR(is31->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
err = PTR_ERR(is31->regmap);
@@ -375,7 +375,7 @@ static int is31fl319x_probe(struct i2c_client *client,
i2c_set_clientdata(client, is31);
/* check for write-reply from chip (we can't read any registers) */
- err = regmap_write(is31->regmap, IS31FL319X_RESET, 0x00);
+ err = regmap_write(is31->regmap, IS31FL3196_RESET, 0x00);
if (err < 0) {
dev_err(&client->dev, "no response from chip write: err = %d\n",
err);
@@ -393,9 +393,9 @@ static int is31fl319x_probe(struct i2c_client *client,
is31->leds[i].max_microamp < aggregated_led_microamp)
aggregated_led_microamp = is31->leds[i].max_microamp;
- regmap_write(is31->regmap, IS31FL319X_CONFIG2,
- is31fl319x_microamp_to_cs(dev, aggregated_led_microamp) |
- is31fl319x_db_to_gain(is31->audio_gain_db));
+ regmap_write(is31->regmap, IS31FL3196_CONFIG2,
+ is31fl3196_microamp_to_cs(dev, aggregated_led_microamp) |
+ is31fl3196_db_to_gain(is31->audio_gain_db));
for (i = 0; i < is31->cdef->num_leds; i++) {
struct is31fl319x_led *led = &is31->leds[i];
@@ -404,7 +404,7 @@ static int is31fl319x_probe(struct i2c_client *client,
continue;
led->chip = is31;
- led->cdev.brightness_set_blocking = is31fl319x_brightness_set;
+ led->cdev.brightness_set_blocking = is31fl3196_brightness_set;
err = devm_led_classdev_register(&client->dev, &led->cdev);
if (err < 0)
--
2.35.3
Add conditionals depending on compatibles to document variants specs:
- possible reg addresses
- whether audio-gain-db is supported or not
- maximum number of leds
- led-max-microamp values
Signed-off-by: Vincent Knecht <[email protected]>
---
.../bindings/leds/issi,is31fl319x.yaml | 80 ++++++++++++++++++-
1 file changed, 78 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
index 155df2e5cbd5..940333f2d69c 100644
--- a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -65,8 +65,6 @@ patternProperties:
maximum: 9
led-max-microamp:
- default: 20000
- enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
description:
Note that a driver will take the lowest of all LED limits
since the chip has a single global setting. The lowest value
@@ -75,6 +73,84 @@ patternProperties:
and not the current, which will always have its peak value
equal to led-max-microamp.
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - issi,is31fl3190
+ - issi,is31fl3191
+ - issi,is31fl3193
+ - si-en,sn3190
+ - si-en,sn3191
+ - si-en,sn3193
+ then:
+ properties:
+ reg:
+ enum: [0x68, 0x69, 0x6a, 0x6b]
+
+ audio-gain-db: false
+
+ patternProperties:
+ "^led@[1-9]$":
+ properties:
+ led-max-microamp:
+ default: 42000
+ enum: [5000, 10000, 17500, 30000, 42000]
+ else:
+ properties:
+ reg:
+ enum: [0x64, 0x65, 0x66, 0x67]
+
+ patternProperties:
+ "^led@[1-9]$":
+ properties:
+ led-max-microamp:
+ default: 20000
+ enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - issi,is31fl3190
+ - issi,is31fl3191
+ - si-en,sn3190
+ - si-en,sn3191
+ then:
+ patternProperties:
+ "^led@[1-9]$":
+ properties:
+ reg:
+ maximum: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - issi,is31fl3193
+ - si-en,sn3193
+ then:
+ patternProperties:
+ "^led@[1-9]$":
+ properties:
+ reg:
+ maximum: 3
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - issi,is31fl3196
+ - si-en,sn3196
+ then:
+ patternProperties:
+ "^led@[1-9]$":
+ properties:
+ reg:
+ maximum: 6
+
required:
- compatible
- reg
--
2.35.3
Add si-en compatibles for all chip variants.
Signed-off-by: Vincent Knecht <[email protected]>
---
drivers/leds/leds-is31fl319x.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index 4161b9dd7e48..0db5d4988131 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -102,6 +102,10 @@ static const struct of_device_id of_is31fl319x_match[] = {
{ .compatible = "issi,is31fl3193", .data = &is31fl3193_cdef, },
{ .compatible = "issi,is31fl3196", .data = &is31fl3196_cdef, },
{ .compatible = "issi,is31fl3199", .data = &is31fl3199_cdef, },
+ { .compatible = "si-en,sn3190", .data = &is31fl3190_cdef, },
+ { .compatible = "si-en,sn3191", .data = &is31fl3190_cdef, },
+ { .compatible = "si-en,sn3193", .data = &is31fl3193_cdef, },
+ { .compatible = "si-en,sn3196", .data = &is31fl3196_cdef, },
{ .compatible = "si-en,sn3199", .data = &is31fl3199_cdef, },
{ }
};
@@ -432,6 +436,10 @@ static const struct i2c_device_id is31fl319x_id[] = {
{ "is31fl3193" },
{ "is31fl3196" },
{ "is31fl3199" },
+ { "sn3190" },
+ { "sn3191" },
+ { "sn3193" },
+ { "sn3196" },
{ "sn3199" },
{},
};
--
2.35.3