2022-06-29 08:18:30

by Judy Hsiao

[permalink] [raw]
Subject: [PATCH v1 1/2] ASoC: rockchip: i2s: Remove unwanted dma settings in rockchip_i2s_probe

Remove the unwanted dma settings in rockchip_i2s_probe.

Fixes: 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <[email protected]>
---
sound/soc/rockchip/rockchip_i2s.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 0ed01624a2db..285b6455be28 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -817,14 +817,6 @@ static int rockchip_i2s_probe(struct platform_device *pdev)

i2s_pinctrl_select_bclk_off(i2s);

- i2s->playback_dma_data.addr = res->start + I2S_TXDR;
- i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->playback_dma_data.maxburst = 4;
-
- i2s->capture_dma_data.addr = res->start + I2S_RXDR;
- i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->capture_dma_data.maxburst = 4;
-
dev_set_drvdata(&pdev->dev, i2s);

pm_runtime_enable(&pdev->dev);
--
2.37.0.rc0.161.g10f37bed90-goog


2022-06-29 14:09:23

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH v1 1/2] ASoC: rockchip: i2s: Remove unwanted dma settings in rockchip_i2s_probe

On Wed, 29 Jun 2022 08:04:21 +0000, Judy Hsiao wrote:
> Remove the unwanted dma settings in rockchip_i2s_probe.
>
>

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: rockchip: i2s: Remove unwanted dma settings in rockchip_i2s_probe
commit: d6910eaa6fc71c0307e16b310a07cdb347d26d7d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark