Add documentation of device tree in YAML schema for the OV5693
CMOS image sensor from Omnivision
Signed-off-by: Tommaso Merciai <[email protected]>
---
Changes since v1:
- Fix allOf position as suggested by Krzysztof
- Remove port description as suggested by Krzysztof
- Fix EOF as suggested by Krzysztof
Changes since v2:
- Fix commit body as suggested by Krzysztof
.../bindings/media/i2c/ovti,ov5693.yaml | 106 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..b83c9fc04023
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+ - Tommaso Merciai <[email protected]>
+
+description: |
+ The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+ image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface.
+
+ OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
+ The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: ovti,ov5693
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description:
+ System input clock (aka XVCLK). From 6 to 27 MHz.
+ maxItems: 1
+
+ dovdd-supply:
+ description:
+ Digital I/O voltage supply, 1.8V.
+
+ avdd-supply:
+ description:
+ Analog voltage supply, 2.8V.
+
+ dvdd-supply:
+ description:
+ Digital core voltage supply, 1.2V.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDN which is physically
+ active low.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5693: camera@36 {
+ compatible = "ovti,ov5693";
+ reg = <0x36>;
+
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&vcc_1v8>;
+ dvdd-supply = <&vcc_1v2>;
+ dovdd-supply = <&vcc_2v8>;
+
+ rotation = <90>;
+ orientation = <0>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fc9ead83d2a..844307cb20c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14719,6 +14719,7 @@ M: Daniel Scally <[email protected]>
L: [email protected]
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
F: drivers/media/i2c/ov5693.c
OMNIVISION OV5695 SENSOR DRIVER
--
2.25.1
On 29/06/2022 17:29, Tommaso Merciai wrote:
> Add documentation of device tree in YAML schema for the OV5693
> CMOS image sensor from Omnivision
>
> Signed-off-by: Tommaso Merciai <[email protected]>
> ---
> Changes since v1:
> - Fix allOf position as suggested by Krzysztof
> - Remove port description as suggested by Krzysztof
> - Fix EOF as suggested by Krzysztof
>
> Changes since v2:
> - Fix commit body as suggested by Krzysztof
You received a tag, so if you decided to send v3, you need to include it.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Hi Krzysztof,
On Wed, Jun 29, 2022 at 08:14:52PM +0200, Krzysztof Kozlowski wrote:
> On 29/06/2022 17:29, Tommaso Merciai wrote:
> > Add documentation of device tree in YAML schema for the OV5693
> > CMOS image sensor from Omnivision
> >
> > Signed-off-by: Tommaso Merciai <[email protected]>
> > ---
> > Changes since v1:
> > - Fix allOf position as suggested by Krzysztof
> > - Remove port description as suggested by Krzysztof
> > - Fix EOF as suggested by Krzysztof
> >
> > Changes since v2:
> > - Fix commit body as suggested by Krzysztof
>
> You received a tag, so if you decided to send v3, you need to include it.
>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
Thanks for suggestion.
Regards,
Tommaso
>
>
> Best regards,
> Krzysztof
--
Tommaso Merciai
Embedded Linux Engineer
[email protected]
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
[email protected]
http://www.amarulasolutions.com