2022-07-01 19:29:08

by Colin Foster

Subject: [PATCH v12 net-next 6/9] pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration

There are a few Ocelot chips that can contain SGPIO logic, but can be
controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In
the externally controlled configurations these registers are not
memory-mapped.

Add support for these non-memory-mapped configurations.

Signed-off-by: Colin Foster <[email protected]>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index e56074b7e659..2b4167a09b3b 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
+#include <linux/mfd/ocelot.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pinctrl/pinmux.h>
@@ -904,7 +905,6 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
struct reset_control *reset;
struct sgpio_priv *priv;
struct clk *clk;
- u32 __iomem *regs;
u32 val;
struct regmap_config regmap_config = {
.reg_bits = 32,
@@ -937,11 +937,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
return -EINVAL;
}

- regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(regs))
- return PTR_ERR(regs);
-
- priv->regs = devm_regmap_init_mmio(dev, regs, &regmap_config);
+ priv->regs = ocelot_regmap_from_resource(pdev, 0, &regmap_config);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);

--
2.25.1