This series aims to make HEVC uapi stable and usable for hardware
decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
and 2 out of the tree drivers (rkvdec and RPI).
version 11:
- Be more verbose about num_entry_point_offsets field usage.
- Fix various typos in "Add documentation to uAPI structure" patch.
version 10:
- Rebased on media_stage/master
- Add Acked-by tag from Nicolas
- Add Tested-by tag from Jernej
- Fix typo in patch 14
This version has been tested with these branches:
- GStreamer: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
- Linux: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/tree/HEVC_UAPI_V10
With patches to decode 10-bits bitstream and produce P010 frames the Fluster score
which was 77/147 before, is now 141/147.
The 10-bits series will comes after this because of it dependency to
uAPI change. If you are curious you can find the WIP branch here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/WIP_HEVC_UAPI_V10
The 6 failing tests are:
- PICSIZE_{A,B,C,D}_Bossen_1 where resolutions are to big for Hantro hardware.
- WPP_D_ericsson_MAIN_2 and WPP_D_ericsson_MAIN10_2 are visually ok but some
difference exist on 5 decoded frames. Some pixels values are no the same
the very end of few lines.
version 9:
- Reword some commit message
- Use fls()
- Remove useless padding at the end of hevc structures
- Reword all _minus* field description
- change CVS to codec video sequence
- Fix various typo
- Fix undefined label: v4l2-ctrl-flag-dynamic-array warning
- fix the waring reported by 'scripts/kernel-doc -none
include/uapi/linux/v4l2-controls.h'
version 8:
- Same than v7 but rebased on media_stage/master
version 7:
- Apply Jernej patches for Cedrus about bit offset definition and
V4L2_CID_STATELESS_HEVC_SLICE_PARAMS being a dynamic array control.
- Based on media_tree/master
version 6:
- Add short_term_ref_pic_set_size and long_term_ref_pic_set_size
in v4l2_ctrl_hevc_decode_params structure.
- Change slice_pic_order_cnt type to s32 to match with PoC type.
- Set V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag automatically when using
V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control.
- Add a define for max slices count
- Stop using Hantro dedicated control.
version 5:
- Change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val in
hevc_dpb_entry structure
- Add defines for SEI pic_struct values (patch 4)
- Fix numbers of bits computation in cedrus_h265_skip_bits() parameters
- Fix num_short_term_ref_pic_sets and num_long_term_ref_pics_sps
documentation (patch 8)
- Rebased on v5-18-rc1
Version 4:
- Add num_entry_point_offsets field in struct v4l2_ctrl_hevc_slice_params
- Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
- Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
- Fix space/tab issue in kernel-doc
- Add patch to change data_bit_offset definition
- Fix hantro-media SPDX license
- put controls under stateless section in v4l2-ctrls-defs.c
Benjamin Gaignard (14):
media: uapi: HEVC: Add missing fields in HEVC controls
media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
prefix
media: uapi: HEVC: Change pic_order_cnt definition in
v4l2_hevc_dpb_entry
media: uapi: HEVC: Add SEI pic struct flags
media: uapi: HEVC: Add documentation to uAPI structure
media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
dynamic array
media: uapi: Move parsed HEVC pixel format out of staging
media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
media: uapi: Move the HEVC stateless control type out of staging
media: controls: Log HEVC stateless control in .std_log
media: hantro: Stop using Hantro dedicated control
media: uapi: HEVC: fix padding in v4l2 control structures
media: uapi: Change data_bit_offset definition
media: uapi: move HEVC stateless controls out of staging
Hans Verkuil (3):
videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
v4l2-ctrls: add support for dynamically allocated arrays.
vivid: add dynamic array test control
.../media/v4l/ext-ctrls-codec-stateless.rst | 901 ++++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 780 ---------------
.../media/v4l/pixfmt-compressed.rst | 7 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
.../media/v4l/vidioc-queryctrl.rst | 8 +
.../media/videodev2.h.rst.exceptions | 6 +
.../media/test-drivers/vivid/vivid-ctrls.c | 15 +
drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 212 ++++-
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 38 +-
drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
drivers/staging/media/hantro/hantro_drv.c | 62 +-
.../staging/media/hantro/hantro_g2_hevc_dec.c | 44 +-
drivers/staging/media/hantro/hantro_hevc.c | 10 +-
drivers/staging/media/hantro/hantro_hw.h | 4 +-
drivers/staging/media/sunxi/cedrus/cedrus.c | 26 +-
.../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
.../staging/media/sunxi/cedrus/cedrus_h265.c | 23 +-
.../staging/media/sunxi/cedrus/cedrus_video.c | 1 -
include/media/hevc-ctrls.h | 250 -----
include/media/v4l2-ctrls.h | 48 +-
include/uapi/linux/v4l2-controls.h | 459 +++++++++
include/uapi/linux/videodev2.h | 13 +
24 files changed, 1830 insertions(+), 1226 deletions(-)
delete mode 100644 include/media/hevc-ctrls.h
--
2.32.0
From: Hans Verkuil <[email protected]>
Add a new flag that indicates that this control is a dynamically sized
array. Also document this flag.
Currently dynamically sized arrays are limited to one dimensional arrays,
but that might change in the future if there is a need for it.
The initial use-case of dynamic arrays are stateless codecs. A frame
can be divided in many slices, so you want to provide an array containing
slice information for each slice. Typically the number of slices is small,
but the standard allow for hundreds or thousands of slices. Dynamic arrays
are a good solution since sizing the array for the worst case would waste
substantial amounts of memory.
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Benjamin Gaignard <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../userspace-api/media/v4l/vidioc-queryctrl.rst | 8 ++++++++
.../userspace-api/media/videodev2.h.rst.exceptions | 1 +
include/uapi/linux/videodev2.h | 1 +
3 files changed, 10 insertions(+)
diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
index 88f630252d98..a20dfa2a933b 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
@@ -625,6 +625,14 @@ See also the examples in :ref:`control`.
``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or
streaming is in progress since most drivers do not support changing
the format in that case.
+ * - ``V4L2_CTRL_FLAG_DYNAMIC_ARRAY``
+ - 0x0800
+ - This control is a dynamically sized 1-dimensional array. It
+ behaves the same as a regular array, except that the number
+ of elements as reported by the ``elems`` field is between 1 and
+ ``dims[0]``. So setting the control with a differently sized
+ array will change the ``elems`` field when the control is
+ queried afterwards.
Return Value
============
diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
index 9cbb7a0c354a..0b91200776f8 100644
--- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
+++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
@@ -379,6 +379,7 @@ replace define V4L2_CTRL_FLAG_VOLATILE control-flags
replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags
replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags
replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags
+replace define V4L2_CTRL_FLAG_DYNAMIC_ARRAY control-flags
replace define V4L2_CTRL_FLAG_NEXT_CTRL control
replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 5311ac4fde35..9018aa984db3 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1890,6 +1890,7 @@ struct v4l2_querymenu {
#define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100
#define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200
#define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400
+#define V4L2_CTRL_FLAG_DYNAMIC_ARRAY 0x0800
/* Query flags, to be ORed with the control ID */
#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
--
2.32.0
Complete the HEVC controls with missing fields from H.265 specifications.
Even if these fields aren't used by the current mainlined drivers
they will be required for (at least) the rkvdec driver.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 32 +++++++++++++++++++
include/media/hevc-ctrls.h | 8 ++++-
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 6183f43f4d73..cff742142a55 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2683,6 +2683,16 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
:stub-columns: 0
:widths: 1 1 2
+ * - __u8
+ - ``video_parameter_set_id``
+ - Specifies the value of the vps_video_parameter_set_id of the active VPS
+ as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
+ of H.265 specifications.
+ * - __u8
+ - ``seq_parameter_set_id``
+ - Provides an identifier for the SPS for reference by other syntax elements
+ as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
+ of H.265 specifications.
* - __u16
- ``pic_width_in_luma_samples``
-
@@ -2822,6 +2832,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
:stub-columns: 0
:widths: 1 1 2
+ * - __u8
+ - ``pic_parameter_set_id``
+ - Identifies the PPS for reference by other syntax elements.
* - __u8
- ``num_extra_slice_header_bits``
-
@@ -3048,6 +3061,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
* - __u8
- ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- The list of L1 reference elements as indices in the DPB.
+ * - __u16
+ - ``short_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set()
+ in the specification, included in the slice header or SPS (section 7.3.6.1).
+ * - __u16
+ - ``long_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the long-term reference picture set include in the slice header
+ or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag)
+ in section 7.3.6.1 of the specification.
* - __u8
- ``padding``
- Applications and drivers must set this to zero.
@@ -3385,6 +3407,16 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``pic_order_cnt_val``
- PicOrderCntVal as described in section 8.3.1 "Decoding process
for picture order count" of the specification.
+ * - __u16
+ - ``short_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the short-term reference picture set, of the first slice
+ described as st_ref_pic_set() in the specification, included in the slice header
+ or SPS (section 7.3.6.1).
+ * - __u16
+ - ``long_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the long-term reference picture set, of the first slice
+ included in the slice header or SPS. It is the number of bits in the conditional block
+ if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification.
* - __u8
- ``num_active_dpb_entries``
- The number of entries in ``dpb``.
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 01ccda48d8c5..752a8d10782c 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -58,6 +58,8 @@ enum v4l2_mpeg_video_hevc_start_code {
/* The controls are not stable at the moment and will likely be reworked. */
struct v4l2_ctrl_hevc_sps {
/* ISO/IEC 23008-2, ITU-T Rec. H.265: Sequence parameter set */
+ __u8 video_parameter_set_id;
+ __u8 seq_parameter_set_id;
__u16 pic_width_in_luma_samples;
__u16 pic_height_in_luma_samples;
__u8 bit_depth_luma_minus8;
@@ -108,6 +110,7 @@ struct v4l2_ctrl_hevc_sps {
struct v4l2_ctrl_hevc_pps {
/* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture parameter set */
+ __u8 pic_parameter_set_id;
__u8 num_extra_slice_header_bits;
__u8 num_ref_idx_l0_default_active_minus1;
__u8 num_ref_idx_l1_default_active_minus1;
@@ -199,7 +202,8 @@ struct v4l2_ctrl_hevc_slice_params {
__u32 slice_segment_addr;
__u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
-
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
__u8 padding;
/* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
@@ -214,6 +218,8 @@ struct v4l2_ctrl_hevc_slice_params {
struct v4l2_ctrl_hevc_decode_params {
__s32 pic_order_cnt_val;
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
__u8 num_active_dpb_entries;
struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 num_poc_st_curr_before;
--
2.32.0
The possible values for the field_pic field in the v4l2_hevc_dpb_entry
structure are defined in the table D.2 in HEVC specification section D.3.3.
Add flags and documentation for each of them.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 54 +++++++++++++++++++
include/media/hevc-ctrls.h | 14 +++++
2 files changed, 68 insertions(+)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 3dfb81a93935..8ba16e8742f3 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3218,6 +3218,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
* - __u8
- ``field_pic``
- Whether the reference is a field picture or a frame.
+ See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>`
* - __u16
- ``pic_order_cnt[2]``
- The picture order count of the reference. Only the first element of the
@@ -3231,6 +3232,59 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
+.. _hevc_dpb_field_pic_flags:
+
+``HEVC dpb field pic Flags``
+
+.. raw:: latex
+
+ \scriptsize
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME``
+ - 0
+ - (progressive) Frame
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD``
+ - 1
+ - Top field
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD``
+ - 2
+ - Bottom field
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM``
+ - 3
+ - Top field, bottom field, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP``
+ - 4
+ - Bottom field, top field, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP``
+ - 5
+ - Top field, bottom field, top field repeated, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM``
+ - 6
+ - Bottom field, top field, bottom field repeated, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING``
+ - 7
+ - Frame doubling
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING``
+ - 8
+ - Frame tripling
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM``
+ - 9
+ - Top field paired with previous bottom field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP``
+ - 10
+ - Bottom field paired with previous top field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM``
+ - 11
+ - Top field paired with next bottom field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP``
+ - 12
+ - Bottom field paired with next top field in output order
+
.. c:type:: v4l2_hevc_pred_weight_table
.. raw:: latex
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 01c1795c57a9..f3695ab44389 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -132,6 +132,20 @@ struct v4l2_ctrl_hevc_pps {
#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME 0
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD 1
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD 2
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM 3
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP 4
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP 5
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM 6
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING 7
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING 8
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM 9
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP 10
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM 11
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP 12
+
#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
struct v4l2_hevc_dpb_entry {
--
2.32.0
HEVC uAPI is used by 2 mainline drivers (Hantro, Cedrus)
and at least 2 out-of-tree drivers (rkvdec, RPi).
The uAPI has been reviewed so it is time to make it 'public' by
un-staging it.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec-stateless.rst | 901 +++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 905 ------------------
.../media/v4l/pixfmt-compressed.rst | 2 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
include/media/hevc-ctrls.h | 474 ---------
include/media/v4l2-ctrls.h | 6 -
include/uapi/linux/v4l2-controls.h | 459 +++++++++
include/uapi/linux/videodev2.h | 5 +
8 files changed, 1386 insertions(+), 1386 deletions(-)
delete mode 100644 include/media/hevc-ctrls.h
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
index bee73065e993..a0aa6f7f5039 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -2048,3 +2048,904 @@ This structure contains all loop filter related parameters. See sections
- 0x2
- When set, the bitstream contains additional syntax elements that
specify which mode and reference frame deltas are to be updated.
+
+.. _v4l2-codec-stateless-hevc:
+
+``V4L2_CID_STATELESS_HEVC_SPS (struct)``
+ Specifies the Sequence Parameter Set fields (as extracted from the
+ bitstream) for the associated HEVC slice data.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.3.2 "Sequence parameter set RBSP
+ semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_sps
+
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_sps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``video_parameter_set_id``
+ - Specifies the value of the vps_video_parameter_set_id of the active VPS
+ as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
+ of H.265 specifications.
+ * - __u8
+ - ``seq_parameter_set_id``
+ - Provides an identifier for the SPS for reference by other syntax elements
+ as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
+ of H.265 specifications.
+ * - __u16
+ - ``pic_width_in_luma_samples``
+ - Specifies the width of each decoded picture in units of luma samples.
+ * - __u16
+ - ``pic_height_in_luma_samples``
+ - Specifies the height of each decoded picture in units of luma samples.
+ * - __u8
+ - ``bit_depth_luma_minus8``
+ - This value plus 8 specifies the bit depth of the samples of the luma array.
+ * - __u8
+ - ``bit_depth_chroma_minus8``
+ - This value plus 8 specifies the bit depth of the samples of the chroma arrays.
+ * - __u8
+ - ``log2_max_pic_order_cnt_lsb_minus4``
+ - Specifies the value of the variable MaxPicOrderCntLsb.
+ * - __u8
+ - ``sps_max_dec_pic_buffering_minus1``
+ - This value plus 1 specifies the maximum required size of the decoded picture buffer for
+ the coded video sequence (CVS).
+ * - __u8
+ - ``sps_max_num_reorder_pics``
+ - Indicates the maximum allowed number of pictures.
+ * - __u8
+ - ``sps_max_latency_increase_plus1``
+ - Used to signal MaxLatencyPictures, which indicates the maximum number of
+ pictures that can precede any picture in output order and follow that
+ picture in decoding order.
+ * - __u8
+ - ``log2_min_luma_coding_block_size_minus3``
+ - This value plus 3 specifies the minimum luma coding block size.
+ * - __u8
+ - ``log2_diff_max_min_luma_coding_block_size``
+ - Specifies the difference between the maximum and minimum luma coding block size.
+ * - __u8
+ - ``log2_min_luma_transform_block_size_minus2``
+ - This value plus 2 specifies the minimum luma transform block size.
+ * - __u8
+ - ``log2_diff_max_min_luma_transform_block_size``
+ - Specifies the difference between the maximum and minimum luma transform block size.
+ * - __u8
+ - ``max_transform_hierarchy_depth_inter``
+ - Specifies the maximum hierarchy depth for transform units of coding units coded
+ in inter prediction mode.
+ * - __u8
+ - ``max_transform_hierarchy_depth_intra``
+ - Specifies the maximum hierarchy depth for transform units of coding units coded in
+ intra prediction mode.
+ * - __u8
+ - ``pcm_sample_bit_depth_luma_minus1``
+ - This value plus 1 specifies the number of bits used to represent each of PCM sample values of the
+ luma component.
+ * - __u8
+ - ``pcm_sample_bit_depth_chroma_minus1``
+ - Specifies the number of bits used to represent each of PCM sample values of
+ the chroma components.
+ * - __u8
+ - ``log2_min_pcm_luma_coding_block_size_minus3``
+ - Plus 3 specifies the minimum size of coding blocks.
+ * - __u8
+ - ``log2_diff_max_min_pcm_luma_coding_block_size``
+ - Specifies the difference between the maximum and minimum size of coding blocks.
+ * - __u8
+ - ``num_short_term_ref_pic_sets``
+ - Specifies the number of st_ref_pic_set() syntax structures included in the SPS.
+ * - __u8
+ - ``num_long_term_ref_pics_sps``
+ - Specifies the number of candidate long-term reference pictures that are
+ specified in the SPS.
+ * - __u8
+ - ``chroma_format_idc``
+ - Specifies the chroma sampling.
+ * - __u8
+ - ``sps_max_sub_layers_minus1``
+ - This value plus 1 specifies the maximum number of temporal sub-layers.
+ * - __u64
+ - ``flags``
+ - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
+
+.. raw:: latex
+
+ \normalsize
+
+.. _hevc_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. raw:: latex
+
+ \small
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED``
+ - 0x00000100
+ -
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_STATELESS_HEVC_PPS (struct)``
+ Specifies the Picture Parameter Set fields (as extracted from the
+ bitstream) for the associated HEVC slice data.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.3.3 "Picture parameter set RBSP
+ semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_pps
+
+.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_pps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``pic_parameter_set_id``
+ - Identifies the PPS for reference by other syntax elements.
+ * - __u8
+ - ``num_extra_slice_header_bits``
+ - Specifies the number of extra slice header bits that are present
+ in the slice header RBSP for coded pictures referring to the PPS.
+ * - __u8
+ - ``num_ref_idx_l0_default_active_minus1``
+ - This value plus 1 specifies the inferred value of num_ref_idx_l0_active_minus1.
+ * - __u8
+ - ``num_ref_idx_l1_default_active_minus1``
+ - This value plus 1 specifies the inferred value of num_ref_idx_l1_active_minus1.
+ * - __s8
+ - ``init_qp_minus26``
+ - This value plus 26 specifies the initial value of SliceQp Y for each slice
+ referring to the PPS.
+ * - __u8
+ - ``diff_cu_qp_delta_depth``
+ - Specifies the difference between the luma coding tree block size
+ and the minimum luma coding block size of coding units that
+ convey cu_qp_delta_abs and cu_qp_delta_sign_flag.
+ * - __s8
+ - ``pps_cb_qp_offset``
+ - Specifies the offsets to the luma quantization parameter Cb.
+ * - __s8
+ - ``pps_cr_qp_offset``
+ - Specifies the offsets to the luma quantization parameter Cr.
+ * - __u8
+ - ``num_tile_columns_minus1``
+ - This value plus 1 specifies the number of tile columns partitioning the picture.
+ * - __u8
+ - ``num_tile_rows_minus1``
+ - This value plus 1 specifies the number of tile rows partitioning the picture.
+ * - __u8
+ - ``column_width_minus1[20]``
+ - This value plus 1 specifies the width of the i-th tile column in units of
+ coding tree blocks.
+ * - __u8
+ - ``row_height_minus1[22]``
+ - This value plus 1 specifies the height of the i-th tile row in units of coding
+ tree blocks.
+ * - __s8
+ - ``pps_beta_offset_div2``
+ - Specifies the default deblocking parameter offsets for beta divided by 2.
+ * - __s8
+ - ``pps_tc_offset_div2``
+ - Specifies the default deblocking parameter offsets for tC divided by 2.
+ * - __u8
+ - ``log2_parallel_merge_level_minus2``
+ - This value plus 2 specifies the value of the variable Log2ParMrgLevel.
+ * - __u8
+ - ``padding[4]``
+ - Applications and drivers must set this to zero.
+ * - __u64
+ - ``flags``
+ - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>`
+
+.. _hevc_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. raw:: latex
+
+ \small
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED``
+ - 0x00000100
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED``
+ - 0x00000200
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED``
+ - 0x00000400
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED``
+ - 0x00000800
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED``
+ - 0x00001000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED``
+ - 0x00002000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+ - 0x00004000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED``
+ - 0x00008000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER``
+ - 0x00010000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT``
+ - 0x00020000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
+ - 0x00040000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+ - 0x00080000
+ - Specifies the presence of deblocking filter control syntax elements in
+ the PPS
+ * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING``
+ - 0x00100000
+ - Specifies that tile column boundaries and likewise tile row boundaries
+ are distributed uniformly across the picture
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)``
+ Specifies various slice-specific parameters, especially from the NAL unit
+ header, general slice segment header and weighted prediction parameter
+ parts of the bitstream.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.7 "General slice segment header
+ semantics" of the specification.
+ This control is a dynamically sized 1-dimensional array,
+ V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
+
+.. c:type:: v4l2_ctrl_hevc_slice_params
+
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_slice_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``bit_size``
+ - Size (in bits) of the current slice data.
+ * - __u32
+ - ``data_byte_offset``
+ - Offset (in byte) to the video data in the current slice data.
+ * - __u32
+ - ``num_entry_point_offsets``
+ - Specifies the number of entry point offset syntax elements in the slice header.
+ This field must be set even if V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
+ control isn't used. Additionally, if entry point offsets control is needed
+ and if submitting multiple slices at once, length of entry point offsets
+ array must be sum of num_entry_point_offsets of all slices in that job.
+ * - __u8
+ - ``nal_unit_type``
+ - Specifies the coding type of the slice (B, P or I).
+ * - __u8
+ - ``nuh_temporal_id_plus1``
+ - Minus 1 specifies a temporal identifier for the NAL unit.
+ * - __u8
+ - ``slice_type``
+ -
+ (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or
+ V4L2_HEVC_SLICE_TYPE_B).
+ * - __u8
+ - ``colour_plane_id``
+ - Specifies the colour plane associated with the current slice.
+ * - __s32
+ - ``slice_pic_order_cnt``
+ - Specifies the picture order count.
+ * - __u8
+ - ``num_ref_idx_l0_active_minus1``
+ - This value plus 1 specifies the maximum reference index for reference picture list 0
+ that may be used to decode the slice.
+ * - __u8
+ - ``num_ref_idx_l1_active_minus1``
+ - This value plus 1 specifies the maximum reference index for reference picture list 1
+ that may be used to decode the slice.
+ * - __u8
+ - ``collocated_ref_idx``
+ - Specifies the reference index of the collocated picture used for
+ temporal motion vector prediction.
+ * - __u8
+ - ``five_minus_max_num_merge_cand``
+ - Specifies the maximum number of merging motion vector prediction
+ candidates supported in the slice subtracted from 5.
+ * - __s8
+ - ``slice_qp_delta``
+ - Specifies the initial value of QpY to be used for the coding blocks in the slice.
+ * - __s8
+ - ``slice_cb_qp_offset``
+ - Specifies a difference to be added to the value of pps_cb_qp_offset.
+ * - __s8
+ - ``slice_cr_qp_offset``
+ - Specifies a difference to be added to the value of pps_cr_qp_offset.
+ * - __s8
+ - ``slice_act_y_qp_offset``
+ - Specifies the offset to the luma of quantization parameter qP derived in section 8.6.2
+ * - __s8
+ - ``slice_act_cb_qp_offset``
+ - Specifies the offset to the cb of quantization parameter qP derived in section 8.6.2
+ * - __s8
+ - ``slice_act_cr_qp_offset``
+ - Specifies the offset to the cr of quantization parameter qP derived in section 8.6.2
+ * - __s8
+ - ``slice_beta_offset_div2``
+ - Specifies the deblocking parameter offsets for beta divided by 2.
+ * - __s8
+ - ``slice_tc_offset_div2``
+ - Specifies the deblocking parameter offsets for tC divided by 2.
+ * - __u8
+ - ``pic_struct``
+ - Indicates whether a picture should be displayed as a frame or as one or more fields.
+ * - __u32
+ - ``slice_segment_addr``
+ - Specifies the address of the first coding tree block in the slice segment.
+ * - __u8
+ - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The list of L0 reference elements as indices in the DPB.
+ * - __u8
+ - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The list of L1 reference elements as indices in the DPB.
+ * - __u16
+ - ``short_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set()
+ in the specification, included in the slice header or SPS (section 7.3.6.1).
+ * - __u16
+ - ``long_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the long-term reference picture set include in the slice header
+ or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag)
+ in section 7.3.6.1 of the specification.
+ * - __u8
+ - ``padding``
+ - Applications and drivers must set this to zero.
+ * - struct :c:type:`v4l2_hevc_pred_weight_table`
+ - ``pred_weight_table``
+ - The prediction weight coefficients for inter-picture prediction.
+ * - __u64
+ - ``flags``
+ - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
+
+.. raw:: latex
+
+ \normalsize
+
+.. _hevc_slice_params_flags:
+
+``Slice Parameters Flags``
+
+.. raw:: latex
+
+ \scriptsize
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+ - 0x00000100
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+ - 0x00000200
+ -
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (integer)``
+ Specifies entry point offsets in bytes.
+ This control is a dynamically sized array. The number of entry point
+ offsets is reported by the ``elems`` field.
+ This bitstream parameter is defined according to :ref:`hevc`.
+ They are described in section 7.4.7.1 "General slice segment header
+ semantics" of the specification.
+
+``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)``
+ Specifies the HEVC scaling matrix parameters used for the scaling process
+ for transform coefficients.
+ These matrix and parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.5 "Scaling list data semantics" of
+ the specification.
+
+.. c:type:: v4l2_ctrl_hevc_scaling_matrix
+
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}|
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``scaling_list_4x4[6][16]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+ * - __u8
+ - ``scaling_list_8x8[6][64]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+ * - __u8
+ - ``scaling_list_16x16[6][64]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+ * - __u8
+ - ``scaling_list_32x32[2][64]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+ * - __u8
+ - ``scaling_list_dc_coef_16x16[6]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+ * - __u8
+ - ``scaling_list_dc_coef_32x32[2]``
+ - Scaling list is used for the scaling process for transform
+ coefficients. The values on each scaling list are expected
+ in raster scan order.
+
+.. raw:: latex
+
+ \normalsize
+
+.. c:type:: v4l2_hevc_dpb_entry
+
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}|
+
+.. flat-table:: struct v4l2_hevc_dpb_entry
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u64
+ - ``timestamp``
+ - Timestamp of the V4L2 capture buffer to use as reference, used
+ with B-coded and P-coded frames. The timestamp refers to the
+ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+ :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+ * - __u8
+ - ``flags``
+ - Long term flag for the reference frame
+ (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as
+ described in the ITU HEVC specification chapter "8.3.2 Decoding
+ process for reference picture set".
+ * - __u8
+ - ``field_pic``
+ - Whether the reference is a field picture or a frame.
+ See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>`
+ * - __s32
+ - ``pic_order_cnt_val``
+ - The picture order count of the current picture.
+ * - __u8
+ - ``padding[2]``
+ - Applications and drivers must set this to zero.
+
+.. raw:: latex
+
+ \normalsize
+
+.. _hevc_dpb_field_pic_flags:
+
+``HEVC dpb field pic Flags``
+
+.. raw:: latex
+
+ \scriptsize
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME``
+ - 0
+ - (progressive) Frame
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD``
+ - 1
+ - Top field
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD``
+ - 2
+ - Bottom field
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM``
+ - 3
+ - Top field, bottom field, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP``
+ - 4
+ - Bottom field, top field, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP``
+ - 5
+ - Top field, bottom field, top field repeated, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM``
+ - 6
+ - Bottom field, top field, bottom field repeated, in that order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING``
+ - 7
+ - Frame doubling
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING``
+ - 8
+ - Frame tripling
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM``
+ - 9
+ - Top field paired with previous bottom field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP``
+ - 10
+ - Bottom field paired with previous top field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM``
+ - 11
+ - Top field paired with next bottom field in output order
+ * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP``
+ - 12
+ - Bottom field paired with next top field in output order
+
+.. c:type:: v4l2_hevc_pred_weight_table
+
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}|
+
+.. flat-table:: struct v4l2_hevc_pred_weight_table
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __s8
+ - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The difference of the weighting factor applied to the luma
+ prediction value for list 0.
+ * - __s8
+ - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The additive offset applied to the luma prediction value for list 0.
+ * - __s8
+ - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ - The difference of the weighting factor applied to the chroma
+ prediction value for list 0.
+ * - __s8
+ - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ - The difference of the additive offset applied to the chroma
+ prediction values for list 0.
+ * - __s8
+ - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The difference of the weighting factor applied to the luma
+ prediction value for list 1.
+ * - __s8
+ - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The additive offset applied to the luma prediction value for list 1.
+ * - __s8
+ - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ - The difference of the weighting factor applied to the chroma
+ prediction value for list 1.
+ * - __s8
+ - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ - The difference of the additive offset applied to the chroma
+ prediction values for list 1.
+ * - __u8
+ - ``luma_log2_weight_denom``
+ - The base 2 logarithm of the denominator for all luma weighting
+ factors.
+ * - __s8
+ - ``delta_chroma_log2_weight_denom``
+ - The difference of the base 2 logarithm of the denominator for
+ all chroma weighting factors.
+ * - __u8
+ - ``padding[6]``
+ - Applications and drivers must set this to zero.
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)``
+ Specifies the decoding mode to use. Currently exposes slice-based and
+ frame-based decoding but new modes might be added later on.
+ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+ are required to set this control in order to specify the decoding mode
+ that is expected for the buffer.
+ Drivers may expose a single or multiple decoding modes, depending
+ on what they can support.
+
+.. c:type:: v4l2_stateless_hevc_decode_mode
+
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED``
+ - 0
+ - Decoding is done at the slice granularity.
+ The OUTPUT buffer must contain a single slice.
+ * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED``
+ - 1
+ - Decoding is done at the frame granularity.
+ The OUTPUT buffer must contain all slices needed to decode the
+ frame.
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_STATELESS_HEVC_START_CODE (enum)``
+ Specifies the HEVC slice start code expected for each slice.
+ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+ are required to set this control in order to specify the start code
+ that is expected for the buffer.
+ Drivers may expose a single or multiple start codes, depending
+ on what they can support.
+
+.. c:type:: v4l2_stateless_hevc_start_code
+
+.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_STATELESS_HEVC_START_CODE_NONE``
+ - 0
+ - Selecting this value specifies that HEVC slices are passed
+ to the driver without any start code. The bitstream data should be
+ according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence
+ contains emulation prevention bytes when required.
+ * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B``
+ - 1
+ - Selecting this value specifies that HEVC slices are expected
+ to be prefixed by Annex B start codes. According to :ref:`hevc`
+ valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
+
+.. raw:: latex
+
+ \normalsize
+
+``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)``
+ Specifies a priority identifier for the NAL unit, which will be applied to
+ the base layer. By default this value is set to 0 for the base layer,
+ and the next layer will have the priority ID assigned as 1, 2, 3 and so on.
+ The video encoder can't decide the priority id to be applied to a layer,
+ so this has to come from client.
+ This is applicable to H264 and valid Range is from 0 to 63.
+ Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1.
+
+``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)``
+ Specifies the maximum number of Long Term Reference (LTR) frames at any
+ given time that the encoder can keep.
+ This is applicable to the H264 and HEVC encoders.
+
+``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)``
+ After setting this control the frame that will be queued next
+ will be marked as a Long Term Reference (LTR) frame
+ and given this LTR index which ranges from 0 to LTR_COUNT-1.
+ This is applicable to the H264 and HEVC encoders.
+ Source Rec. ITU-T H.264 (06/2019); Table 7.9
+
+``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)``
+ Specifies the Long Term Reference (LTR) frame(s) to be used for
+ encoding the next frame queued after setting this control.
+ This provides a bitmask which consists of bits [0, LTR_COUNT-1].
+ This is applicable to the H264 and HEVC encoders.
+
+``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)``
+ Specifies various decode parameters, especially the references picture order
+ count (POC) for all the lists (short, long, before, current, after) and the
+ number of entries for each of them.
+ These parameters are defined according to :ref:`hevc`.
+ They are described in section 8.3 "Slice decoding process" of the
+ specification.
+
+.. c:type:: v4l2_ctrl_hevc_decode_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_decode_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __s32
+ - ``pic_order_cnt_val``
+ - PicOrderCntVal as described in section 8.3.1 "Decoding process
+ for picture order count" of the specification.
+ * - __u16
+ - ``short_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the short-term reference picture set, of the first slice
+ described as st_ref_pic_set() in the specification, included in the slice header
+ or SPS (section 7.3.6.1).
+ * - __u16
+ - ``long_term_ref_pic_set_size``
+ - Specifies the size, in bits, of the long-term reference picture set, of the first slice
+ included in the slice header or SPS. It is the number of bits in the conditional block
+ if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification.
+ * - __u8
+ - ``num_active_dpb_entries``
+ - The number of entries in ``dpb``.
+ * - __u8
+ - ``num_poc_st_curr_before``
+ - The number of reference pictures in the short-term set that come before
+ the current frame.
+ * - __u8
+ - ``num_poc_st_curr_after``
+ - The number of reference pictures in the short-term set that come after
+ the current frame.
+ * - __u8
+ - ``num_poc_lt_curr``
+ - The number of reference pictures in the long-term set.
+ * - __u8
+ - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference
+ picture set": provides the index of the short term before references in DPB array.
+ * - __u8
+ - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference
+ picture set": provides the index of the short term after references in DPB array.
+ * - __u8
+ - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - PocLtCurr as described in section 8.3.2 "Decoding process for reference
+ picture set": provides the index of the long term references in DPB array.
+ * - struct :c:type:`v4l2_hevc_dpb_entry`
+ - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The decoded picture buffer, for meta-data about reference frames.
+ * - __u64
+ - ``flags``
+ - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
+
+.. _hevc_decode_params_flags:
+
+``Decode Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR``
+ - 0x00000004
+ -
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index f012673a3e64..2a165ae063fb 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2658,908 +2658,3 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
disables generating SPS and PPS at every IDR. Setting it to one enables
generating SPS and PPS at every IDR.
-
-.. _v4l2-mpeg-hevc:
-
-``V4L2_CID_STATELESS_HEVC_SPS (struct)``
- Specifies the Sequence Parameter Set fields (as extracted from the
- bitstream) for the associated HEVC slice data.
- These bitstream parameters are defined according to :ref:`hevc`.
- They are described in section 7.4.3.2 "Sequence parameter set RBSP
- semantics" of the specification.
-
-.. c:type:: v4l2_ctrl_hevc_sps
-
-.. raw:: latex
-
- \small
-
-.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_sps
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``video_parameter_set_id``
- - Specifies the value of the vps_video_parameter_set_id of the active VPS
- as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
- of H.265 specifications.
- * - __u8
- - ``seq_parameter_set_id``
- - Provides an identifier for the SPS for reference by other syntax elements
- as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics"
- of H.265 specifications.
- * - __u16
- - ``pic_width_in_luma_samples``
- - Specifies the width of each decoded picture in units of luma samples.
- * - __u16
- - ``pic_height_in_luma_samples``
- - Specifies the height of each decoded picture in units of luma samples.
- * - __u8
- - ``bit_depth_luma_minus8``
- - This value plus 8 specifies the bit depth of the samples of the luma array.
- * - __u8
- - ``bit_depth_chroma_minus8``
- - This value plus 8 specifies the bit depth of the samples of the chroma arrays.
- * - __u8
- - ``log2_max_pic_order_cnt_lsb_minus4``
- - This value plus 4 specifies the value of the variable MaxPicOrderCntLsb.
- * - __u8
- - ``sps_max_dec_pic_buffering_minus1``
- - This value plus 1 specifies the maximum required size of the decoded picture buffer for
- the codec video sequence.
- * - __u8
- - ``sps_max_num_reorder_pics``
- - Indicates the maximum allowed number of pictures.
- * - __u8
- - ``sps_max_latency_increase_plus1``
- - Not equal to 0 is used to compute the value of SpsMaxLatencyPictures array.
- * - __u8
- - ``log2_min_luma_coding_block_size_minus3``
- - This value plus 3 specifies the minimum luma coding block size.
- * - __u8
- - ``log2_diff_max_min_luma_coding_block_size``
- - Specifies the difference between the maximum and minimum luma coding block size.
- * - __u8
- - ``log2_min_luma_transform_block_size_minus2``
- - This value plus 2 specifies the minimum luma transform block size.
- * - __u8
- - ``log2_diff_max_min_luma_transform_block_size``
- - Specifies the difference between the maximum and minimum luma transform block size.
- * - __u8
- - ``max_transform_hierarchy_depth_inter``
- - Specifies the maximum hierarchy depth for transform units of coding units coded
- in inter prediction mode.
- * - __u8
- - ``max_transform_hierarchy_depth_intra``
- - Specifies the maximum hierarchy depth for transform units of coding units coded in
- intra prediction mode.
- * - __u8
- - ``pcm_sample_bit_depth_luma_minus1``
- - This value plus 1 specifies the number of bits used to represent each of PCM sample
- values of the luma component.
- * - __u8
- - ``pcm_sample_bit_depth_chroma_minus1``
- - This value plus 1 specifies the number of bits used to represent each of PCM sample
- values of the chroma components.
- * - __u8
- - ``log2_min_pcm_luma_coding_block_size_minus3``
- - This value plus 3 specifies the minimum size of coding blocks.
- * - __u8
- - ``log2_diff_max_min_pcm_luma_coding_block_size``
- - Specifies the difference between the maximum and minimum size of coding blocks.
- * - __u8
- - ``num_short_term_ref_pic_sets``
- - Specifies the number of st_ref_pic_set() syntax structures included in the SPS.
- * - __u8
- - ``num_long_term_ref_pics_sps``
- - Specifies the number of candidate long-term reference pictures that are
- specified in the SPS.
- * - __u8
- - ``chroma_format_idc``
- - Specifies the chroma sampling.
- * - __u8
- - ``sps_max_sub_layers_minus1``
- - This value plus 1 specifies the maximum number of temporal sub-layers.
- * - __u64
- - ``flags``
- - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
-
-.. raw:: latex
-
- \normalsize
-
-.. _hevc_sps_flags:
-
-``Sequence Parameter Set Flags``
-
-.. raw:: latex
-
- \small
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE``
- - 0x00000001
- -
- * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED``
- - 0x00000002
- -
- * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED``
- - 0x00000004
- -
- * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET``
- - 0x00000008
- -
- * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED``
- - 0x00000010
- -
- * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED``
- - 0x00000020
- -
- * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT``
- - 0x00000040
- -
- * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED``
- - 0x00000080
- -
- * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED``
- - 0x00000100
- -
-
-.. raw:: latex
-
- \normalsize
-
-``V4L2_CID_STATELESS_HEVC_PPS (struct)``
- Specifies the Picture Parameter Set fields (as extracted from the
- bitstream) for the associated HEVC slice data.
- These bitstream parameters are defined according to :ref:`hevc`.
- They are described in section 7.4.3.3 "Picture parameter set RBSP
- semantics" of the specification.
-
-.. c:type:: v4l2_ctrl_hevc_pps
-
-.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_pps
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``pic_parameter_set_id``
- - Identifies the PPS for reference by other syntax elements.
- * - __u8
- - ``num_extra_slice_header_bits``
- - Specifies the number of extra slice header bits that are present
- in the slice header RBSP for coded pictures referring to the PPS.
- * - __u8
- - ``num_ref_idx_l0_default_active_minus1``
- - This value plus 1 specifies the inferred value of num_ref_idx_l0_active_minus1.
- * - __u8
- - ``num_ref_idx_l1_default_active_minus1``
- - This value plus 1 specifies the inferred value of num_ref_idx_l1_active_minus1.
- * - __s8
- - ``init_qp_minus26``
- - This value plus 26 specifies the initial value of SliceQp Y for each slice
- referring to the PPS.
- * - __u8
- - ``diff_cu_qp_delta_depth``
- - Specifies the difference between the luma coding tree block size
- and the minimum luma coding block size of coding units that
- convey cu_qp_delta_abs and cu_qp_delta_sign_flag.
- * - __s8
- - ``pps_cb_qp_offset``
- - Specifies the offsets to the luma quantization parameter Cb.
- * - __s8
- - ``pps_cr_qp_offset``
- - Specifies the offsets to the luma quantization parameter Cr.
- * - __u8
- - ``num_tile_columns_minus1``
- - This value plus 1 specifies the number of tile columns partitioning the picture.
- * - __u8
- - ``num_tile_rows_minus1``
- - This value plus 1 specifies the number of tile rows partitioning the picture.
- * - __u8
- - ``column_width_minus1[20]``
- - Plus 1 specifies the width of each tile column in units of
- coding tree blocks.
- * - __u8
- - ``row_height_minus1[22]``
- - This value plus 1 specifies the height of each tile row in units of coding
- tree blocks.
- * - __s8
- - ``pps_beta_offset_div2``
- - Specifies the default deblocking parameter offsets for beta divided by 2.
- * - __s8
- - ``pps_tc_offset_div2``
- - Specifies the default deblocking parameter offsets for tC divided by 2.
- * - __u8
- - ``log2_parallel_merge_level_minus2``
- - Plus 2 specifies the value of the variable Log2ParMrgLevel.
- * - __u8
- - ``padding[4]``
- - Applications and drivers must set this to zero.
- * - __u64
- - ``flags``
- - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>`
-
-.. _hevc_pps_flags:
-
-``Picture Parameter Set Flags``
-
-.. raw:: latex
-
- \small
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
- - 0x00000001
- -
- * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
- - 0x00000002
- -
- * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED``
- - 0x00000004
- -
- * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT``
- - 0x00000008
- -
- * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED``
- - 0x00000010
- -
- * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED``
- - 0x00000020
- -
- * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED``
- - 0x00000040
- -
- * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT``
- - 0x00000080
- -
- * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED``
- - 0x00000100
- -
- * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED``
- - 0x00000200
- -
- * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED``
- - 0x00000400
- -
- * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED``
- - 0x00000800
- -
- * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED``
- - 0x00001000
- -
- * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED``
- - 0x00002000
- -
- * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED``
- - 0x00004000
- -
- * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED``
- - 0x00008000
- -
- * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER``
- - 0x00010000
- -
- * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT``
- - 0x00020000
- -
- * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
- - 0x00040000
- -
- * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
- - 0x00080000
- - Specifies the presence of deblocking filter control syntax elements in
- the PPS
- * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING``
- - 0x00100000
- - Specifies that tile column boundaries and likewise tile row boundaries
- are distributed uniformly across the picture
-
-.. raw:: latex
-
- \normalsize
-
-``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)``
- Specifies various slice-specific parameters, especially from the NAL unit
- header, general slice segment header and weighted prediction parameter
- parts of the bitstream.
- These bitstream parameters are defined according to :ref:`hevc`.
- They are described in section 7.4.7 "General slice segment header
- semantics" of the specification.
- This control is a dynamically sized 1-dimensional array,
- V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
-
-.. c:type:: v4l2_ctrl_hevc_slice_params
-
-.. raw:: latex
-
- \scriptsize
-
-.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_slice_params
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u32
- - ``bit_size``
- - Size (in bits) of the current slice data.
- * - __u32
- - ``data_byte_offset``
- - Offset (in bytes) to the video data in the current slice data.
- * - __u32
- - ``num_entry_point_offsets``
- - Specifies the number of entry point offset syntax elements in the slice header.
- This field must be set even if V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
- control isn't used. Additionally, if entry point offsets control is needed
- and if submitting multiple slices at once, length of entry point offsets
- array must be sum of num_entry_point_offsets of all slices in that job.
- * - __u8
- - ``nal_unit_type``
- - Specifies the coding type of the slice (B, P or I).
- * - __u8
- - ``nuh_temporal_id_plus1``
- - This value minus 1 specifies a temporal identifier for the NAL unit.
- * - __u8
- - ``slice_type``
- -
- (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or
- V4L2_HEVC_SLICE_TYPE_B).
- * - __u8
- - ``colour_plane_id``
- - Specifies the colour plane associated with the current slice.
- * - __s32
- - ``slice_pic_order_cnt``
- - Specifies the picture order count.
- * - __u8
- - ``num_ref_idx_l0_active_minus1``
- - This value plus 1 specifies the maximum reference index for
- reference picture list 0 that may be used to decode the slice.
- * - __u8
- - ``num_ref_idx_l1_active_minus1``
- - This value plus 1 specifies the maximum reference index for
- reference picture list 1 that may be used to decode the slice.
- * - __u8
- - ``collocated_ref_idx``
- - Specifies the reference index of the collocated picture used for
- temporal motion vector prediction.
- * - __u8
- - ``five_minus_max_num_merge_cand``
- - Specifies the maximum number of merging motion vector prediction
- candidates supported in the slice subtracted from 5.
- * - __s8
- - ``slice_qp_delta``
- - Specifies the initial value of QpY to be used for the coding blocks in the slice.
- * - __s8
- - ``slice_cb_qp_offset``
- - Specifies a difference to be added to the value of pps_cb_qp_offset.
- * - __s8
- - ``slice_cr_qp_offset``
- - Specifies a difference to be added to the value of pps_cr_qp_offset.
- * - __s8
- - ``slice_act_y_qp_offset``
- - Screen content extension parameters.
- * - __s8
- - ``slice_act_cb_qp_offset``
- - Screen content extension parameters.
- * - __s8
- - ``slice_act_cr_qp_offset``
- - Screen content extension parameters.
- * - __s8
- - ``slice_beta_offset_div2``
- - Specifies the deblocking parameter offsets for beta divided by 2.
- * - __s8
- - ``slice_tc_offset_div2``
- - Specifies the deblocking parameter offsets for tC divided by 2.
- * - __u8
- - ``pic_struct``
- - Indicates whether a picture should be displayed as a frame or as one or more fields.
- * - __u32
- - ``slice_segment_addr``
- - Specifies the address of the first coding tree block in the slice segment.
- * - __u8
- - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The list of L0 reference elements as indices in the DPB.
- * - __u8
- - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The list of L1 reference elements as indices in the DPB.
- * - __u16
- - ``short_term_ref_pic_set_size``
- - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set()
- in the specification, included in the slice header or SPS (section 7.3.6.1).
- * - __u16
- - ``long_term_ref_pic_set_size``
- - Specifies the size, in bits, of the long-term reference picture set include in the slice header
- or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag)
- in section 7.3.6.1 of the specification.
- * - __u8
- - ``padding``
- - Applications and drivers must set this to zero.
- * - struct :c:type:`v4l2_hevc_pred_weight_table`
- - ``pred_weight_table``
- - The prediction weight coefficients for inter-picture prediction.
- * - __u64
- - ``flags``
- - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
-
-.. raw:: latex
-
- \normalsize
-
-.. _hevc_slice_params_flags:
-
-``Slice Parameters Flags``
-
-.. raw:: latex
-
- \scriptsize
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA``
- - 0x00000001
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA``
- - 0x00000002
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED``
- - 0x00000004
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO``
- - 0x00000008
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT``
- - 0x00000010
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0``
- - 0x00000020
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV``
- - 0x00000040
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED``
- - 0x00000080
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
- - 0x00000100
- -
- * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
- - 0x00000200
- -
-
-.. raw:: latex
-
- \normalsize
-
-``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (integer)``
- Specifies entry point offsets in bytes.
- This control is a dynamically sized array. The number of entry point
- offsets is reported by the ``elems`` field.
- This bitstream parameter is defined according to :ref:`hevc`.
- They are described in section 7.4.7.1 "General slice segment header
- semantics" of the specification.
-
-``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)``
- Specifies the HEVC scaling matrix parameters used for the scaling process
- for transform coefficients.
- These matrix and parameters are defined according to :ref:`hevc`.
- They are described in section 7.4.5 "Scaling list data semantics" of
- the specification.
-
-.. c:type:: v4l2_ctrl_hevc_scaling_matrix
-
-.. raw:: latex
-
- \scriptsize
-
-.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}|
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``scaling_list_4x4[6][16]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
- * - __u8
- - ``scaling_list_8x8[6][64]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
- * - __u8
- - ``scaling_list_16x16[6][64]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
- * - __u8
- - ``scaling_list_32x32[2][64]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
- * - __u8
- - ``scaling_list_dc_coef_16x16[6]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
- * - __u8
- - ``scaling_list_dc_coef_32x32[2]``
- - Scaling list is used for the scaling process for transform
- coefficients. The values on each scaling list are expected
- in raster scan order.
-
-.. raw:: latex
-
- \normalsize
-
-.. c:type:: v4l2_hevc_dpb_entry
-
-.. raw:: latex
-
- \small
-
-.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}|
-
-.. flat-table:: struct v4l2_hevc_dpb_entry
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u64
- - ``timestamp``
- - Timestamp of the V4L2 capture buffer to use as reference, used
- with B-coded and P-coded frames. The timestamp refers to the
- ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
- :c:func:`v4l2_timeval_to_ns()` function to convert the struct
- :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
- * - __u8
- - ``flags``
- - Long term flag for the reference frame
- (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as
- described in the ITU HEVC specification chapter "8.3.2 Decoding
- process for reference picture set".
- * - __u8
- - ``field_pic``
- - Whether the reference is a field picture or a frame.
- See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>`
- * - __s32
- - ``pic_order_cnt_val``
- - The picture order count of the current picture.
- * - __u8
- - ``padding[2]``
- - Applications and drivers must set this to zero.
-
-.. raw:: latex
-
- \normalsize
-
-.. _hevc_dpb_field_pic_flags:
-
-``HEVC dpb field pic Flags``
-
-.. raw:: latex
-
- \scriptsize
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME``
- - 0
- - (progressive) Frame
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD``
- - 1
- - Top field
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD``
- - 2
- - Bottom field
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM``
- - 3
- - Top field, bottom field, in that order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP``
- - 4
- - Bottom field, top field, in that order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP``
- - 5
- - Top field, bottom field, top field repeated, in that order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM``
- - 6
- - Bottom field, top field, bottom field repeated, in that order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING``
- - 7
- - Frame doubling
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING``
- - 8
- - Frame tripling
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM``
- - 9
- - Top field paired with previous bottom field in output order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP``
- - 10
- - Bottom field paired with previous top field in output order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM``
- - 11
- - Top field paired with next bottom field in output order
- * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP``
- - 12
- - Bottom field paired with next top field in output order
-
-.. c:type:: v4l2_hevc_pred_weight_table
-
-.. raw:: latex
-
- \footnotesize
-
-.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}|
-
-.. flat-table:: struct v4l2_hevc_pred_weight_table
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __s8
- - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The difference of the weighting factor applied to the luma
- prediction value for list 0.
- * - __s8
- - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The additive offset applied to the luma prediction value for list 0.
- * - __s8
- - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
- - The difference of the weighting factor applied to the chroma
- prediction value for list 0.
- * - __s8
- - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
- - The difference of the additive offset applied to the chroma
- prediction values for list 0.
- * - __s8
- - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The difference of the weighting factor applied to the luma
- prediction value for list 1.
- * - __s8
- - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The additive offset applied to the luma prediction value for list 1.
- * - __s8
- - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
- - The difference of the weighting factor applied to the chroma
- prediction value for list 1.
- * - __s8
- - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
- - The difference of the additive offset applied to the chroma
- prediction values for list 1.
- * - __u8
- - ``luma_log2_weight_denom``
- - The base 2 logarithm of the denominator for all luma weighting
- factors.
- * - __s8
- - ``delta_chroma_log2_weight_denom``
- - The difference of the base 2 logarithm of the denominator for
- all chroma weighting factors.
- * - __u8
- - ``padding[6]``
- - Applications and drivers must set this to zero.
-
-.. raw:: latex
-
- \normalsize
-
-``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)``
- Specifies the decoding mode to use. Currently exposes slice-based and
- frame-based decoding but new modes might be added later on.
- This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
- pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
- are required to set this control in order to specify the decoding mode
- that is expected for the buffer.
- Drivers may expose a single or multiple decoding modes, depending
- on what they can support.
-
- .. note::
-
- This menu control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_stateless_hevc_decode_mode
-
-.. raw:: latex
-
- \small
-
-.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}|
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED``
- - 0
- - Decoding is done at the slice granularity.
- The OUTPUT buffer must contain a single slice.
- * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED``
- - 1
- - Decoding is done at the frame granularity.
- The OUTPUT buffer must contain all slices needed to decode the
- frame. The OUTPUT buffer must also contain both fields.
-
-.. raw:: latex
-
- \normalsize
-
-``V4L2_CID_STATELESS_HEVC_START_CODE (enum)``
- Specifies the HEVC slice start code expected for each slice.
- This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
- pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
- are required to set this control in order to specify the start code
- that is expected for the buffer.
- Drivers may expose a single or multiple start codes, depending
- on what they can support.
-
- .. note::
-
- This menu control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_stateless_hevc_start_code
-
-.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}|
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_STATELESS_HEVC_START_CODE_NONE``
- - 0
- - Selecting this value specifies that HEVC slices are passed
- to the driver without any start code. The bitstream data should be
- according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence
- contains emulation prevention bytes when required.
- * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B``
- - 1
- - Selecting this value specifies that HEVC slices are expected
- to be prefixed by Annex B start codes. According to :ref:`hevc`
- valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
-
-``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)``
- Specifies a priority identifier for the NAL unit, which will be applied to
- the base layer. By default this value is set to 0 for the base layer,
- and the next layer will have the priority ID assigned as 1, 2, 3 and so on.
- The video encoder can't decide the priority id to be applied to a layer,
- so this has to come from client.
- This is applicable to H264 and valid Range is from 0 to 63.
- Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1.
-
-``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)``
- Specifies the maximum number of Long Term Reference (LTR) frames at any
- given time that the encoder can keep.
- This is applicable to the H264 and HEVC encoders.
-
-``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)``
- After setting this control the frame that will be queued next
- will be marked as a Long Term Reference (LTR) frame
- and given this LTR index which ranges from 0 to LTR_COUNT-1.
- This is applicable to the H264 and HEVC encoders.
- Source Rec. ITU-T H.264 (06/2019); Table 7.9
-
-``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)``
- Specifies the Long Term Reference (LTR) frame(s) to be used for
- encoding the next frame queued after setting this control.
- This provides a bitmask which consists of bits [0, LTR_COUNT-1].
- This is applicable to the H264 and HEVC encoders.
-
-``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)``
- Specifies various decode parameters, especially the references picture order
- count (POC) for all the lists (short, long, before, current, after) and the
- number of entries for each of them.
- These parameters are defined according to :ref:`hevc`.
- They are described in section 8.3 "Slice decoding process" of the
- specification.
-
-.. c:type:: v4l2_ctrl_hevc_decode_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_hevc_decode_params
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __s32
- - ``pic_order_cnt_val``
- - PicOrderCntVal as described in section 8.3.1 "Decoding process
- for picture order count" of the specification.
- * - __u16
- - ``short_term_ref_pic_set_size``
- - Specifies the size, in bits, of the short-term reference picture set, of the first slice
- described as st_ref_pic_set() in the specification, included in the slice header
- or SPS (section 7.3.6.1).
- * - __u16
- - ``long_term_ref_pic_set_size``
- - Specifies the size, in bits, of the long-term reference picture set, of the first slice
- included in the slice header or SPS. It is the number of bits in the conditional block
- if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification.
- * - __u8
- - ``num_active_dpb_entries``
- - The number of entries in ``dpb``.
- * - __u8
- - ``num_poc_st_curr_before``
- - The number of reference pictures in the short-term set that come before
- the current frame.
- * - __u8
- - ``num_poc_st_curr_after``
- - The number of reference pictures in the short-term set that come after
- the current frame.
- * - __u8
- - ``num_poc_lt_curr``
- - The number of reference pictures in the long-term set.
- * - __u8
- - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference
- picture set": provides the index of the short term before references in DPB array.
- * - __u8
- - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference
- picture set": provides the index of the short term after references in DPB array.
- * - __u8
- - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - PocLtCurr as described in section 8.3.2 "Decoding process for reference
- picture set": provides the index of the long term references in DPB array.
- * - struct :c:type:`v4l2_hevc_dpb_entry`
- - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The decoded picture buffer, for meta-data about reference frames.
- * - __u64
- - ``flags``
- - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
-
-.. _hevc_decode_params_flags:
-
-``Decode Parameters Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC``
- - 0x00000001
- -
- * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC``
- - 0x00000002
- -
- * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR``
- - 0x00000004
- -
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
index c352d91a73d8..506dd3c98884 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
@@ -212,7 +212,7 @@ Compressed Formats
``V4L2_CID_MPEG_VIDEO_HEVC_SPS``,
``V4L2_CID_MPEG_VIDEO_HEVC_PPS``, and
``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS``.
- See the :ref:`associated Codec Control IDs <v4l2-mpeg-hevc>`.
+ See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-hevc>`.
Buffers associated with this pixel format must contain the appropriate
number of macroblocks to decode a full corresponding frame.
* .. _V4L2-PIX-FMT-FWHT:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index 29971a45a2d4..892cfeb8b988 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -249,6 +249,26 @@ still cause this situation.
- ``p_hdr10_mastering``
- A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is
of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``.
+ * - struct :c:type:`v4l2_ctrl_hevc_sps` *
+ - ``p_hevc_sps``
+ - A pointer to a struct :c:type:`v4l2_ctrl_hevc_sps`. Valid if this
+ control is of type ``V4L2_CTRL_TYPE_HEVC_SPS``.
+ * - struct :c:type:`v4l2_ctrl_hevc_pps` *
+ - ``p_hevc_pps``
+ - A pointer to a struct :c:type:`v4l2_ctrl_hevc_pps`. Valid if this
+ control is of type ``V4L2_CTRL_TYPE_HEVC_PPS``.
+ * - struct :c:type:`v4l2_ctrl_hevc_slice_params` *
+ - ``p_hevc_slice_params``
+ - A pointer to a struct :c:type:`v4l2_ctrl_hevc_slice_params`. Valid if this
+ control is of type ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS``.
+ * - struct :c:type:`v4l2_ctrl_hevc_scaling_matrix` *
+ - ``p_hevc_scaling_matrix``
+ - A pointer to a struct :c:type:`v4l2_ctrl_hevc_scaling_matrix`. Valid if this
+ control is of type ``V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX``.
+ * - struct :c:type:`v4l2_ctrl_hevc_decode_params` *
+ - ``p_hevc_decode_params``
+ - A pointer to a struct :c:type:`v4l2_ctrl_hevc_decode_params`. Valid if this
+ control is of type ``V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS``.
* - void *
- ``ptr``
- A pointer to a compound type which can be an N-dimensional array
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
deleted file mode 100644
index c89029b3c5da..000000000000
--- a/include/media/hevc-ctrls.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * These are the HEVC state controls for use with stateless HEVC
- * codec drivers.
- *
- * It turns out that these structs are not stable yet and will undergo
- * more changes. So keep them private until they are stable and ready to
- * become part of the official public API.
- */
-
-#ifndef _HEVC_CTRLS_H_
-#define _HEVC_CTRLS_H_
-
-#include <linux/videodev2.h>
-
-#define V4L2_CID_STATELESS_HEVC_SPS (V4L2_CID_CODEC_BASE + 1008)
-#define V4L2_CID_STATELESS_HEVC_PPS (V4L2_CID_CODEC_BASE + 1009)
-#define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_BASE + 1010)
-#define V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_BASE + 1011)
-#define V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_BASE + 1012)
-#define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_BASE + 1015)
-#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_BASE + 1016)
-#define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_BASE + 1017)
-
-enum v4l2_stateless_hevc_decode_mode {
- V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
- V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
-};
-
-enum v4l2_stateless_hevc_start_code {
- V4L2_STATELESS_HEVC_START_CODE_NONE,
- V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
-};
-
-#define V4L2_HEVC_SLICE_TYPE_B 0
-#define V4L2_HEVC_SLICE_TYPE_P 1
-#define V4L2_HEVC_SLICE_TYPE_I 2
-
-#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0)
-#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1)
-#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2)
-#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3)
-#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4)
-#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5)
-#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6)
-#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7)
-#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8)
-
-/**
- * struct v4l2_ctrl_hevc_sps - ITU-T Rec. H.265: Sequence parameter set
- *
- * @video_parameter_set_id: specifies the value of the
- * vps_video_parameter_set_id of the active VPS
- * @seq_parameter_set_id: provides an identifier for the SPS for
- * reference by other syntax elements
- * @pic_width_in_luma_samples: specifies the width of each decoded picture
- * in units of luma samples
- * @pic_height_in_luma_samples: specifies the height of each decoded picture
- * in units of luma samples
- * @bit_depth_luma_minus8: this value plus 8 specifies the bit depth of the
- * samples of the luma array
- * @bit_depth_chroma_minus8: this value plus 8 specifies the bit depth of the
- * samples of the chroma arrays
- * @log2_max_pic_order_cnt_lsb_minus4: this value plus 4 specifies the value
- * of the variable MaxPicOrderCntLsb
- * @sps_max_dec_pic_buffering_minus1: this value plus 1 specifies the maximum
- * required size of the decoded picture
- * buffer for the codec video sequence
- * @sps_max_num_reorder_pics: indicates the maximum allowed number of pictures
- * @sps_max_latency_increase_plus1: not equal to 0 is used to compute the
- * value of SpsMaxLatencyPictures array
- * @log2_min_luma_coding_block_size_minus3: this value plus 3 specifies the
- * minimum luma coding block size
- * @log2_diff_max_min_luma_coding_block_size: specifies the difference between
- * the maximum and minimum luma
- * coding block size
- * @log2_min_luma_transform_block_size_minus2: this value plus 2 specifies the
- * minimum luma transform block size
- * @log2_diff_max_min_luma_transform_block_size: specifies the difference between
- * the maximum and minimum luma
- * transform block size
- * @max_transform_hierarchy_depth_inter: specifies the maximum hierarchy
- * depth for transform units of
- * coding units coded in inter
- * prediction mode
- * @max_transform_hierarchy_depth_intra: specifies the maximum hierarchy
- * depth for transform units of
- * coding units coded in intra
- * prediction mode
- * @pcm_sample_bit_depth_luma_minus1: this value plus 1 specifies the number of
- * bits used to represent each of PCM sample
- * values of the luma component
- * @pcm_sample_bit_depth_chroma_minus1: this value plus 1 specifies the number
- * of bits used to represent each of PCM
- * sample values of the chroma components
- * @log2_min_pcm_luma_coding_block_size_minus3: this value plus 3 specifies the
- * minimum size of coding blocks
- * @log2_diff_max_min_pcm_luma_coding_block_size: specifies the difference between
- * the maximum and minimum size of
- * coding blocks
- * @num_short_term_ref_pic_sets: specifies the number of st_ref_pic_set()
- * syntax structures included in the SPS
- * @num_long_term_ref_pics_sps: specifies the number of candidate long-term
- * reference pictures that are specified in the SPS
- * @chroma_format_idc: specifies the chroma sampling
- * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
- * of temporal sub-layers
- * @reserved: padding field. Should be zeroed by applications.
- * @flags: see V4L2_HEVC_SPS_FLAG_{}
- */
-struct v4l2_ctrl_hevc_sps {
- __u8 video_parameter_set_id;
- __u8 seq_parameter_set_id;
- __u16 pic_width_in_luma_samples;
- __u16 pic_height_in_luma_samples;
- __u8 bit_depth_luma_minus8;
- __u8 bit_depth_chroma_minus8;
- __u8 log2_max_pic_order_cnt_lsb_minus4;
- __u8 sps_max_dec_pic_buffering_minus1;
- __u8 sps_max_num_reorder_pics;
- __u8 sps_max_latency_increase_plus1;
- __u8 log2_min_luma_coding_block_size_minus3;
- __u8 log2_diff_max_min_luma_coding_block_size;
- __u8 log2_min_luma_transform_block_size_minus2;
- __u8 log2_diff_max_min_luma_transform_block_size;
- __u8 max_transform_hierarchy_depth_inter;
- __u8 max_transform_hierarchy_depth_intra;
- __u8 pcm_sample_bit_depth_luma_minus1;
- __u8 pcm_sample_bit_depth_chroma_minus1;
- __u8 log2_min_pcm_luma_coding_block_size_minus3;
- __u8 log2_diff_max_min_pcm_luma_coding_block_size;
- __u8 num_short_term_ref_pic_sets;
- __u8 num_long_term_ref_pics_sps;
- __u8 chroma_format_idc;
- __u8 sps_max_sub_layers_minus1;
-
- __u8 reserved[6];
- __u64 flags;
-};
-
-#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED (1ULL << 0)
-#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1)
-#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2)
-#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3)
-#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4)
-#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5)
-#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6)
-#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7)
-#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8)
-#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9)
-#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10)
-#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11)
-#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12)
-#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13)
-#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14)
-#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15)
-#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16)
-#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17)
-#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18)
-#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT (1ULL << 19)
-#define V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING (1ULL << 20)
-
-/**
- * struct v4l2_ctrl_hevc_pps - ITU-T Rec. H.265: Picture parameter set
- *
- * @pic_parameter_set_id: identifies the PPS for reference by other
- * syntax elements
- * @num_extra_slice_header_bits: specifies the number of extra slice header
- * bits that are present in the slice header RBSP
- * for coded pictures referring to the PPS.
- * @num_ref_idx_l0_default_active_minus1: this value plus 1 specifies the inferred
- * value of num_ref_idx_l0_active_minus1
- * @num_ref_idx_l1_default_active_minus1: this value plus 1 specifies the inferred
- * value of num_ref_idx_l1_active_minus1
- * @init_qp_minus26: this value plus 26 specifies the initial value of SliceQp Y
- * for each slice referring to the PPS
- * @diff_cu_qp_delta_depth: specifies the difference between the luma coding
- * tree block size and the minimum luma coding block
- * size of coding units that convey cu_qp_delta_abs
- * and cu_qp_delta_sign_flag
- * @pps_cb_qp_offset: specify the offsets to the luma quantization parameter Cb
- * @pps_cr_qp_offset: specify the offsets to the luma quantization parameter Cr
- * @num_tile_columns_minus1: this value plus 1 specifies the number of tile columns
- * partitioning the picture
- * @num_tile_rows_minus1: this value plus 1 specifies the number of tile rows
- * partitioning the picture
- * @column_width_minus1: this value plus 1 specifies the width of each tile column
- * in units of coding tree blocks
- * @row_height_minus1: this value plus 1 specifies the height of each tile row in
- * units of coding tree blocks
- * @pps_beta_offset_div2: specify the default deblocking parameter offsets for
- * beta divided by 2
- * @pps_tc_offset_div2: specify the default deblocking parameter offsets for tC
- * divided by 2
- * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
- * the variable Log2ParMrgLevel
- * @reserved: padding field. Should be zeroed by applications.
- * @flags: see V4L2_HEVC_PPS_FLAG_{}
- */
-struct v4l2_ctrl_hevc_pps {
- __u8 pic_parameter_set_id;
- __u8 num_extra_slice_header_bits;
- __u8 num_ref_idx_l0_default_active_minus1;
- __u8 num_ref_idx_l1_default_active_minus1;
- __s8 init_qp_minus26;
- __u8 diff_cu_qp_delta_depth;
- __s8 pps_cb_qp_offset;
- __s8 pps_cr_qp_offset;
- __u8 num_tile_columns_minus1;
- __u8 num_tile_rows_minus1;
- __u8 column_width_minus1[20];
- __u8 row_height_minus1[22];
- __s8 pps_beta_offset_div2;
- __s8 pps_tc_offset_div2;
- __u8 log2_parallel_merge_level_minus2;
- __u8 reserved;
- __u64 flags;
-};
-
-#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01
-
-#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME 0
-#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD 1
-#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD 2
-#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM 3
-#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP 4
-#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP 5
-#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM 6
-#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING 7
-#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING 8
-#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM 9
-#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP 10
-#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM 11
-#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP 12
-
-#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
-
-/**
- * struct v4l2_hevc_dpb_entry - HEVC decoded picture buffer entry
- *
- * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
- * @flags: long term flag for the reference frame
- * @field_pic: whether the reference is a field picture or a frame.
- * @reserved: padding field. Should be zeroed by applications.
- * @pic_order_cnt_val: the picture order count of the reference.
- */
-struct v4l2_hevc_dpb_entry {
- __u64 timestamp;
- __u8 flags;
- __u8 field_pic;
- __u16 reserved;
- __s32 pic_order_cnt_val;
-};
-
-/**
- * struct v4l2_hevc_pred_weight_table - HEVC weighted prediction parameters
- *
- * @delta_luma_weight_l0: the difference of the weighting factor applied
- * to the luma prediction value for list 0
- * @luma_offset_l0: the additive offset applied to the luma prediction value
- * for list 0
- * @delta_chroma_weight_l0: the difference of the weighting factor applied
- * to the chroma prediction values for list 0
- * @chroma_offset_l0: the difference of the additive offset applied to
- * the chroma prediction values for list 0
- * @delta_luma_weight_l1: the difference of the weighting factor applied
- * to the luma prediction value for list 1
- * @luma_offset_l1: the additive offset applied to the luma prediction value
- * for list 1
- * @delta_chroma_weight_l1: the difference of the weighting factor applied
- * to the chroma prediction values for list 1
- * @chroma_offset_l1: the difference of the additive offset applied to
- * the chroma prediction values for list 1
- * @luma_log2_weight_denom: the base 2 logarithm of the denominator for
- * all luma weighting factors
- * @delta_chroma_log2_weight_denom: the difference of the base 2 logarithm
- * of the denominator for all chroma
- * weighting factors
- */
-struct v4l2_hevc_pred_weight_table {
- __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
- __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
-
- __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
- __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
-
- __u8 luma_log2_weight_denom;
- __s8 delta_chroma_log2_weight_denom;
-};
-
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8)
-#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9)
-
-/**
- * struct v4l2_ctrl_hevc_slice_params - HEVC slice parameters
- *
- * This control is a dynamically sized 1-dimensional array,
- * V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
- *
- * @bit_size: size (in bits) of the current slice data
- * @data_byte_offset: offset (in bytes) to the video data in the current slice data
- * @num_entry_point_offsets: specifies the number of entry point offset syntax
- * elements in the slice header.
- * @nal_unit_type: specifies the coding type of the slice (B, P or I)
- * @nuh_temporal_id_plus1: minus 1 specifies a temporal identifier for the NAL unit
- * @slice_type: see V4L2_HEVC_SLICE_TYPE_{}
- * @colour_plane_id: specifies the colour plane associated with the current slice
- * @slice_pic_order_cnt: specifies the picture order count
- * @num_ref_idx_l0_active_minus1: this value plus 1 specifies the maximum reference
- * index for reference picture list 0 that may be
- * used to decode the slice
- * @num_ref_idx_l1_active_minus1: this value plus 1 specifies the maximum reference
- * index for reference picture list 1 that may be
- * used to decode the slice
- * @collocated_ref_idx: specifies the reference index of the collocated picture used
- * for temporal motion vector prediction
- * @five_minus_max_num_merge_cand: specifies the maximum number of merging
- * motion vector prediction candidates supported in
- * the slice subtracted from 5
- * @slice_qp_delta: specifies the initial value of QpY to be used for the coding
- * blocks in the slice
- * @slice_cb_qp_offset: specifies a difference to be added to the value of pps_cb_qp_offset
- * @slice_cr_qp_offset: specifies a difference to be added to the value of pps_cr_qp_offset
- * @slice_act_y_qp_offset: screen content extension parameters
- * @slice_act_cb_qp_offset: screen content extension parameters
- * @slice_act_cr_qp_offset: screen content extension parameters
- * @slice_beta_offset_div2: specify the deblocking parameter offsets for beta divided by 2
- * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
- * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
- * more fields
- * @reserved0: padding field. Should be zeroed by applications.
- * @slice_segment_addr: specifies the address of the first coding tree block in
- * the slice segment
- * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
- * @ref_idx_l1: the list of L1 reference elements as indices in the DPB
- * @short_term_ref_pic_set_size: specifies the size of short-term reference
- * pictures included in the SPS
- * @long_term_ref_pic_set_size: specifies the size of long-term reference
- * picture include in the SPS
- * @pred_weight_table: the prediction weight coefficients for inter-picture
- * prediction
- * @reserved1: padding field. Should be zeroed by applications.
- * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
- */
-struct v4l2_ctrl_hevc_slice_params {
- __u32 bit_size;
- __u32 data_byte_offset;
- __u32 num_entry_point_offsets;
- /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */
- __u8 nal_unit_type;
- __u8 nuh_temporal_id_plus1;
-
- /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
- __u8 slice_type;
- __u8 colour_plane_id;
- __s32 slice_pic_order_cnt;
- __u8 num_ref_idx_l0_active_minus1;
- __u8 num_ref_idx_l1_active_minus1;
- __u8 collocated_ref_idx;
- __u8 five_minus_max_num_merge_cand;
- __s8 slice_qp_delta;
- __s8 slice_cb_qp_offset;
- __s8 slice_cr_qp_offset;
- __s8 slice_act_y_qp_offset;
- __s8 slice_act_cb_qp_offset;
- __s8 slice_act_cr_qp_offset;
- __s8 slice_beta_offset_div2;
- __s8 slice_tc_offset_div2;
-
- /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
- __u8 pic_struct;
-
- __u8 reserved0[3];
- /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
- __u32 slice_segment_addr;
- __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u16 short_term_ref_pic_set_size;
- __u16 long_term_ref_pic_set_size;
-
- /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
- struct v4l2_hevc_pred_weight_table pred_weight_table;
-
- __u8 reserved1[2];
- __u64 flags;
-};
-
-#define V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC 0x1
-#define V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC 0x2
-#define V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR 0x4
-
-/**
- * struct v4l2_ctrl_hevc_decode_params - HEVC decode parameters
- *
- * @pic_order_cnt_val: picture order count
- * @short_term_ref_pic_set_size: specifies the size of short-term reference
- * pictures set included in the SPS of the first slice
- * @long_term_ref_pic_set_size: specifies the size of long-term reference
- * pictures set include in the SPS of the first slice
- * @num_active_dpb_entries: the number of entries in dpb
- * @num_poc_st_curr_before: the number of reference pictures in the short-term
- * set that come before the current frame
- * @num_poc_st_curr_after: the number of reference pictures in the short-term
- * set that come after the current frame
- * @num_poc_lt_curr: the number of reference pictures in the long-term set
- * @poc_st_curr_before: provides the index of the short term before references
- * in DPB array
- * @poc_st_curr_after: provides the index of the short term after references
- * in DPB array
- * @poc_lt_curr: provides the index of the long term references in DPB array
- * @reserved: padding field. Should be zeroed by applications.
- * @dpb: the decoded picture buffer, for meta-data about reference frames
- * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
- */
-struct v4l2_ctrl_hevc_decode_params {
- __s32 pic_order_cnt_val;
- __u16 short_term_ref_pic_set_size;
- __u16 long_term_ref_pic_set_size;
- __u8 num_active_dpb_entries;
- __u8 num_poc_st_curr_before;
- __u8 num_poc_st_curr_after;
- __u8 num_poc_lt_curr;
- __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u8 reserved[4];
- struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
- __u64 flags;
-};
-
-/**
- * struct v4l2_ctrl_hevc_scaling_matrix - HEVC scaling lists parameters
- *
- * @scaling_list_4x4: scaling list is used for the scaling process for
- * transform coefficients. The values on each scaling
- * list are expected in raster scan order
- * @scaling_list_8x8: scaling list is used for the scaling process for
- * transform coefficients. The values on each scaling
- * list are expected in raster scan order
- * @scaling_list_16x16: scaling list is used for the scaling process for
- * transform coefficients. The values on each scaling
- * list are expected in raster scan order
- * @scaling_list_32x32: scaling list is used for the scaling process for
- * transform coefficients. The values on each scaling
- * list are expected in raster scan order
- * @scaling_list_dc_coef_16x16: scaling list is used for the scaling process
- * for transform coefficients. The values on each
- * scaling list are expected in raster scan order.
- * @scaling_list_dc_coef_32x32: scaling list is used for the scaling process
- * for transform coefficients. The values on each
- * scaling list are expected in raster scan order.
- */
-struct v4l2_ctrl_hevc_scaling_matrix {
- __u8 scaling_list_4x4[6][16];
- __u8 scaling_list_8x8[6][64];
- __u8 scaling_list_16x16[6][64];
- __u8 scaling_list_32x32[2][64];
- __u8 scaling_list_dc_coef_16x16[6];
- __u8 scaling_list_dc_coef_32x32[2];
-};
-
-#endif
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index f4105de8a8d2..00828a4f9404 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -13,12 +13,6 @@
#include <linux/videodev2.h>
#include <media/media-request.h>
-/*
- * Include the stateless codec compound control definitions.
- * This will move to the public headers once this API is fully stable.
- */
-#include <media/hevc-ctrls.h>
-
/* forward references */
struct file;
struct poll_table_struct;
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index dfff69ed88f7..5f46bf4a570c 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -1997,6 +1997,465 @@ struct v4l2_ctrl_mpeg2_quantisation {
__u8 chroma_non_intra_quantiser_matrix[64];
};
+#define V4L2_CID_STATELESS_HEVC_SPS (V4L2_CID_CODEC_STATELESS_BASE + 400)
+#define V4L2_CID_STATELESS_HEVC_PPS (V4L2_CID_CODEC_STATELESS_BASE + 401)
+#define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 402)
+#define V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_STATELESS_BASE + 403)
+#define V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 404)
+#define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_STATELESS_BASE + 405)
+#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_STATELESS_BASE + 406)
+#define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_STATELESS_BASE + 407)
+
+enum v4l2_stateless_hevc_decode_mode {
+ V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
+ V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
+};
+
+enum v4l2_stateless_hevc_start_code {
+ V4L2_STATELESS_HEVC_START_CODE_NONE,
+ V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
+};
+
+#define V4L2_HEVC_SLICE_TYPE_B 0
+#define V4L2_HEVC_SLICE_TYPE_P 1
+#define V4L2_HEVC_SLICE_TYPE_I 2
+
+#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0)
+#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1)
+#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2)
+#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3)
+#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4)
+#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5)
+#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6)
+#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7)
+#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8)
+
+/**
+ * struct v4l2_ctrl_hevc_sps - ITU-T Rec. H.265: Sequence parameter set
+ *
+ * @video_parameter_set_id: specifies the value of the
+ * vps_video_parameter_set_id of the active VPS
+ * @seq_parameter_set_id: provides an identifier for the SPS for
+ * reference by other syntax elements
+ * @pic_width_in_luma_samples: specifies the width of each decoded picture
+ * in units of luma samples
+ * @pic_height_in_luma_samples: specifies the height of each decoded picture
+ * in units of luma samples
+ * @bit_depth_luma_minus8: this value plus 8specifies the bit depth of the
+ * samples of the luma array
+ * @bit_depth_chroma_minus8: this value plus 8 specifies the bit depth of the
+ * samples of the chroma arrays
+ * @log2_max_pic_order_cnt_lsb_minus4: this value plus 4 specifies the value of
+ * the variable MaxPicOrderCntLsb
+ * @sps_max_dec_pic_buffering_minus1: this value plus 1 specifies the maximum
+ * required size of the decoded picture
+ * buffer for the codec video sequence
+ * @sps_max_num_reorder_pics: indicates the maximum allowed number of pictures
+ * @sps_max_latency_increase_plus1: not equal to 0 is used to compute the
+ * value of SpsMaxLatencyPictures array
+ * @log2_min_luma_coding_block_size_minus3: plus 3 specifies the minimum
+ * luma coding block size
+ * @log2_diff_max_min_luma_coding_block_size: specifies the difference between
+ * the maximum and minimum luma
+ * coding block size
+ * @log2_min_luma_transform_block_size_minus2: plus 2 specifies the minimum luma
+ * transform block size
+ * @log2_diff_max_min_luma_transform_block_size: specifies the difference between
+ * the maximum and minimum luma
+ * transform block size
+ * @max_transform_hierarchy_depth_inter: specifies the maximum hierarchy
+ * depth for transform units of
+ * coding units coded in inter
+ * prediction mode
+ * @max_transform_hierarchy_depth_intra: specifies the maximum hierarchy
+ * depth for transform units of
+ * coding units coded in intra
+ * prediction mode
+ * @pcm_sample_bit_depth_luma_minus1: this value plus 1 specifies the number of
+ * bits used to represent each of PCM sample
+ * values of the luma component
+ * @pcm_sample_bit_depth_chroma_minus1: this value plus 1 specifies the number
+ * of bits used to represent each of PCM
+ * sample values of the chroma components
+ * @log2_min_pcm_luma_coding_block_size_minus3: this value plus 3 specifies the
+ * minimum size of coding blocks
+ * @log2_diff_max_min_pcm_luma_coding_block_size: specifies the difference between
+ * the maximum and minimum size of
+ * coding blocks
+ * @num_short_term_ref_pic_sets: specifies the number of st_ref_pic_set()
+ * syntax structures included in the SPS
+ * @num_long_term_ref_pics_sps: specifies the number of candidate long-term
+ * reference pictures that are specified in the SPS
+ * @chroma_format_idc: specifies the chroma sampling
+ * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
+ * of temporal sub-layers
+ * @reserved: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_SPS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_sps {
+ __u8 video_parameter_set_id;
+ __u8 seq_parameter_set_id;
+ __u16 pic_width_in_luma_samples;
+ __u16 pic_height_in_luma_samples;
+ __u8 bit_depth_luma_minus8;
+ __u8 bit_depth_chroma_minus8;
+ __u8 log2_max_pic_order_cnt_lsb_minus4;
+ __u8 sps_max_dec_pic_buffering_minus1;
+ __u8 sps_max_num_reorder_pics;
+ __u8 sps_max_latency_increase_plus1;
+ __u8 log2_min_luma_coding_block_size_minus3;
+ __u8 log2_diff_max_min_luma_coding_block_size;
+ __u8 log2_min_luma_transform_block_size_minus2;
+ __u8 log2_diff_max_min_luma_transform_block_size;
+ __u8 max_transform_hierarchy_depth_inter;
+ __u8 max_transform_hierarchy_depth_intra;
+ __u8 pcm_sample_bit_depth_luma_minus1;
+ __u8 pcm_sample_bit_depth_chroma_minus1;
+ __u8 log2_min_pcm_luma_coding_block_size_minus3;
+ __u8 log2_diff_max_min_pcm_luma_coding_block_size;
+ __u8 num_short_term_ref_pic_sets;
+ __u8 num_long_term_ref_pics_sps;
+ __u8 chroma_format_idc;
+ __u8 sps_max_sub_layers_minus1;
+
+ __u8 reserved[6];
+ __u64 flags;
+};
+
+#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED (1ULL << 0)
+#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1)
+#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2)
+#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3)
+#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4)
+#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5)
+#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6)
+#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7)
+#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8)
+#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9)
+#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10)
+#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11)
+#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12)
+#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13)
+#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14)
+#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15)
+#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16)
+#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17)
+#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18)
+#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT (1ULL << 19)
+#define V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING (1ULL << 20)
+
+/**
+ * struct v4l2_ctrl_hevc_pps - ITU-T Rec. H.265: Picture parameter set
+ *
+ * @pic_parameter_set_id: identifies the PPS for reference by other
+ * syntax elements
+ * @num_extra_slice_header_bits: specifies the number of extra slice header
+ * bits that are present in the slice header RBSP
+ * for coded pictures referring to the PPS.
+ * @num_ref_idx_l0_default_active_minus1: this value plus 1 specifies the
+ * inferred value of num_ref_idx_l0_active_minus1
+ * @num_ref_idx_l1_default_active_minus1: this value plus 1 specifies the
+ * inferred value of num_ref_idx_l1_active_minus1
+ * @init_qp_minus26: this value plus 26 specifies the initial value of SliceQp Y for
+ * each slice referring to the PPS
+ * @diff_cu_qp_delta_depth: specifies the difference between the luma coding
+ * tree block size and the minimum luma coding block
+ * size of coding units that convey cu_qp_delta_abs
+ * and cu_qp_delta_sign_flag
+ * @pps_cb_qp_offset: specify the offsets to the luma quantization parameter Cb
+ * @pps_cr_qp_offset: specify the offsets to the luma quantization parameter Cr
+ * @num_tile_columns_minus1: this value plus 1 specifies the number of tile columns
+ * partitioning the picture
+ * @num_tile_rows_minus1: this value plus 1 specifies the number of tile rows partitioning
+ * the picture
+ * @column_width_minus1: this value plus 1 specifies the width of the each tile column in
+ * units of coding tree blocks
+ * @row_height_minus1: this value plus 1 specifies the height of the each tile row in
+ * units of coding tree blocks
+ * @pps_beta_offset_div2: specify the default deblocking parameter offsets for
+ * beta divided by 2
+ * @pps_tc_offset_div2: specify the default deblocking parameter offsets for tC
+ * divided by 2
+ * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
+ * the variable Log2ParMrgLevel
+ * @reserved: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_PPS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_pps {
+ __u8 pic_parameter_set_id;
+ __u8 num_extra_slice_header_bits;
+ __u8 num_ref_idx_l0_default_active_minus1;
+ __u8 num_ref_idx_l1_default_active_minus1;
+ __s8 init_qp_minus26;
+ __u8 diff_cu_qp_delta_depth;
+ __s8 pps_cb_qp_offset;
+ __s8 pps_cr_qp_offset;
+ __u8 num_tile_columns_minus1;
+ __u8 num_tile_rows_minus1;
+ __u8 column_width_minus1[20];
+ __u8 row_height_minus1[22];
+ __s8 pps_beta_offset_div2;
+ __s8 pps_tc_offset_div2;
+ __u8 log2_parallel_merge_level_minus2;
+ __u8 reserved;
+ __u64 flags;
+};
+
+#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01
+
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME 0
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD 1
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD 2
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM 3
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP 4
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP 5
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM 6
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING 7
+#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING 8
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM 9
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP 10
+#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM 11
+#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP 12
+
+#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
+
+/**
+ * struct v4l2_hevc_dpb_entry - HEVC decoded picture buffer entry
+ *
+ * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
+ * @flags: long term flag for the reference frame
+ * @field_pic: whether the reference is a field picture or a frame.
+ * @reserved: padding field. Should be zeroed by applications.
+ * @pic_order_cnt_val: the picture order count of the current picture.
+ */
+struct v4l2_hevc_dpb_entry {
+ __u64 timestamp;
+ __u8 flags;
+ __u8 field_pic;
+ __u16 reserved;
+ __s32 pic_order_cnt_val;
+};
+
+/**
+ * struct v4l2_hevc_pred_weight_table - HEVC weighted prediction parameters
+ *
+ * @delta_luma_weight_l0: the difference of the weighting factor applied
+ * to the luma prediction value for list 0
+ * @luma_offset_l0: the additive offset applied to the luma prediction value
+ * for list 0
+ * @delta_chroma_weight_l0: the difference of the weighting factor applied
+ * to the chroma prediction values for list 0
+ * @chroma_offset_l0: the difference of the additive offset applied to
+ * the chroma prediction values for list 0
+ * @delta_luma_weight_l1: the difference of the weighting factor applied
+ * to the luma prediction value for list 1
+ * @luma_offset_l1: the additive offset applied to the luma prediction value
+ * for list 1
+ * @delta_chroma_weight_l1: the difference of the weighting factor applied
+ * to the chroma prediction values for list 1
+ * @chroma_offset_l1: the difference of the additive offset applied to
+ * the chroma prediction values for list 1
+ * @luma_log2_weight_denom: the base 2 logarithm of the denominator for
+ * all luma weighting factors
+ * @delta_chroma_log2_weight_denom: the difference of the base 2 logarithm
+ * of the denominator for all chroma
+ * weighting factors
+ */
+struct v4l2_hevc_pred_weight_table {
+ __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+ __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+
+ __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+ __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
+
+ __u8 luma_log2_weight_denom;
+ __s8 delta_chroma_log2_weight_denom;
+};
+
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9)
+
+/**
+ * struct v4l2_ctrl_hevc_slice_params - HEVC slice parameters
+ *
+ * This control is a dynamically sized 1-dimensional array,
+ * V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
+ *
+ * @bit_size: size (in bits) of the current slice data
+ * @data_byte_offset: offset (in bytes) to the video data in the current slice data
+ * @num_entry_point_offsets: specifies the number of entry point offset syntax
+ * elements in the slice header.
+ * @nal_unit_type: specifies the coding type of the slice (B, P or I)
+ * @nuh_temporal_id_plus1: minus 1 specifies a temporal identifier for the NAL unit
+ * @slice_type: see V4L2_HEVC_SLICE_TYPE_{}
+ * @colour_plane_id: specifies the colour plane associated with the current slice
+ * @slice_pic_order_cnt: specifies the picture order count
+ * @num_ref_idx_l0_active_minus1: this value plus 1 specifies the maximum
+ * reference index for reference picture list 0
+ * that may be used to decode the slice
+ * @num_ref_idx_l1_active_minus1: this value plus 1 specifies the maximum
+ * reference index for reference picture list 1
+ * that may be used to decode the slice
+ * @collocated_ref_idx: specifies the reference index of the collocated picture used
+ * for temporal motion vector prediction
+ * @five_minus_max_num_merge_cand: specifies the maximum number of merging
+ * motion vector prediction candidates supported in
+ * the slice subtracted from 5
+ * @slice_qp_delta: specifies the initial value of QpY to be used for the coding
+ * blocks in the slice
+ * @slice_cb_qp_offset: specifies a difference to be added to the value of pps_cb_qp_offset
+ * @slice_cr_qp_offset: specifies a difference to be added to the value of pps_cr_qp_offset
+ * @slice_act_y_qp_offset: screen content extension parameters
+ * @slice_act_cb_qp_offset: screen content extension parameters
+ * @slice_act_cr_qp_offset: screen content extension parameters
+ * @slice_beta_offset_div2: specify the deblocking parameter offsets for beta divided by 2
+ * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
+ * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
+ * more fields
+ * @reserved0: padding field. Should be zeroed by applications.
+ * @slice_segment_addr: specifies the address of the first coding tree block in
+ * the slice segment
+ * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
+ * @ref_idx_l1: the list of L1 reference elements as indices in the DPB
+ * @short_term_ref_pic_set_size: specifies the size of short-term reference
+ * pictures set included in the SPS
+ * @long_term_ref_pic_set_size: specifies the size of long-term reference
+ * pictures set include in the SPS
+ * @pred_weight_table: the prediction weight coefficients for inter-picture
+ * prediction
+ * @reserved1: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_slice_params {
+ __u32 bit_size;
+ __u32 data_byte_offset;
+ __u32 num_entry_point_offsets;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */
+ __u8 nal_unit_type;
+ __u8 nuh_temporal_id_plus1;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
+ __u8 slice_type;
+ __u8 colour_plane_id;
+ __s32 slice_pic_order_cnt;
+ __u8 num_ref_idx_l0_active_minus1;
+ __u8 num_ref_idx_l1_active_minus1;
+ __u8 collocated_ref_idx;
+ __u8 five_minus_max_num_merge_cand;
+ __s8 slice_qp_delta;
+ __s8 slice_cb_qp_offset;
+ __s8 slice_cr_qp_offset;
+ __s8 slice_act_y_qp_offset;
+ __s8 slice_act_cb_qp_offset;
+ __s8 slice_act_cr_qp_offset;
+ __s8 slice_beta_offset_div2;
+ __s8 slice_tc_offset_div2;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
+ __u8 pic_struct;
+
+ __u8 reserved0[3];
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
+ __u32 slice_segment_addr;
+ __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
+
+ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
+ struct v4l2_hevc_pred_weight_table pred_weight_table;
+
+ __u8 reserved1[2];
+ __u64 flags;
+};
+
+#define V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC 0x1
+#define V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC 0x2
+#define V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR 0x4
+
+/**
+ * struct v4l2_ctrl_hevc_decode_params - HEVC decode parameters
+ *
+ * @pic_order_cnt_val: picture order count
+ * @short_term_ref_pic_set_size: specifies the size of short-term reference
+ * pictures set included in the SPS of the first slice
+ * @long_term_ref_pic_set_size: specifies the size of long-term reference
+ * pictures set include in the SPS of the first slice
+ * @num_active_dpb_entries: the number of entries in dpb
+ * @num_poc_st_curr_before: the number of reference pictures in the short-term
+ * set that come before the current frame
+ * @num_poc_st_curr_after: the number of reference pictures in the short-term
+ * set that come after the current frame
+ * @num_poc_lt_curr: the number of reference pictures in the long-term set
+ * @poc_st_curr_before: provides the index of the short term before references
+ * in DPB array
+ * @poc_st_curr_after: provides the index of the short term after references
+ * in DPB array
+ * @poc_lt_curr: provides the index of the long term references in DPB array
+ * @reserved: padding field. Should be zeroed by applications.
+ * @dpb: the decoded picture buffer, for meta-data about reference frames
+ * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
+ */
+struct v4l2_ctrl_hevc_decode_params {
+ __s32 pic_order_cnt_val;
+ __u16 short_term_ref_pic_set_size;
+ __u16 long_term_ref_pic_set_size;
+ __u8 num_active_dpb_entries;
+ __u8 num_poc_st_curr_before;
+ __u8 num_poc_st_curr_after;
+ __u8 num_poc_lt_curr;
+ __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 reserved[4];
+ struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u64 flags;
+};
+
+/**
+ * struct v4l2_ctrl_hevc_scaling_matrix - HEVC scaling lists parameters
+ *
+ * @scaling_list_4x4: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_8x8: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_16x16: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_32x32: scaling list is used for the scaling process for
+ * transform coefficients. The values on each scaling
+ * list are expected in raster scan order
+ * @scaling_list_dc_coef_16x16: scaling list is used for the scaling process
+ * for transform coefficients. The values on each
+ * scaling list are expected in raster scan order.
+ * @scaling_list_dc_coef_32x32: scaling list is used for the scaling process
+ * for transform coefficients. The values on each
+ * scaling list are expected in raster scan order.
+ */
+struct v4l2_ctrl_hevc_scaling_matrix {
+ __u8 scaling_list_4x4[6][16];
+ __u8 scaling_list_8x8[6][64];
+ __u8 scaling_list_16x16[6][64];
+ __u8 scaling_list_32x32[2][64];
+ __u8 scaling_list_dc_coef_16x16[6];
+ __u8 scaling_list_dc_coef_32x32[2];
+};
+
#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900)
#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1)
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index e0d19a6b5bc7..5a73b92ffe4d 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1769,6 +1769,11 @@ struct v4l2_ext_control {
struct v4l2_ctrl_mpeg2_quantisation __user *p_mpeg2_quantisation;
struct v4l2_ctrl_vp9_compressed_hdr __user *p_vp9_compressed_hdr_probs;
struct v4l2_ctrl_vp9_frame __user *p_vp9_frame;
+ struct v4l2_ctrl_hevc_sps __user *p_hevc_sps;
+ struct v4l2_ctrl_hevc_pps __user *p_hevc_pps;
+ struct v4l2_ctrl_hevc_slice_params __user *p_hevc_slice_params;
+ struct v4l2_ctrl_hevc_scaling_matrix __user *p_hevc_scaling_matrix;
+ struct v4l2_ctrl_hevc_decode_params __user *p_hevc_decode_params;
void __user *ptr;
};
} __attribute__ ((packed));
--
2.32.0
From: Hans Verkuil <[email protected]>
Add a dynamic array test control to help test support for this
feature.
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Benjamin Gaignard <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
drivers/media/test-drivers/vivid/vivid-ctrls.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/media/test-drivers/vivid/vivid-ctrls.c b/drivers/media/test-drivers/vivid/vivid-ctrls.c
index 7ff8fdfda28e..a78d676575bc 100644
--- a/drivers/media/test-drivers/vivid/vivid-ctrls.c
+++ b/drivers/media/test-drivers/vivid/vivid-ctrls.c
@@ -34,6 +34,7 @@
#define VIVID_CID_U8_4D_ARRAY (VIVID_CID_CUSTOM_BASE + 10)
#define VIVID_CID_AREA (VIVID_CID_CUSTOM_BASE + 11)
#define VIVID_CID_RO_INTEGER (VIVID_CID_CUSTOM_BASE + 12)
+#define VIVID_CID_U32_DYN_ARRAY (VIVID_CID_CUSTOM_BASE + 13)
#define VIVID_CID_VIVID_BASE (0x00f00000 | 0xf000)
#define VIVID_CID_VIVID_CLASS (0x00f00000 | 1)
@@ -190,6 +191,19 @@ static const struct v4l2_ctrl_config vivid_ctrl_u32_array = {
.dims = { 1 },
};
+static const struct v4l2_ctrl_config vivid_ctrl_u32_dyn_array = {
+ .ops = &vivid_user_gen_ctrl_ops,
+ .id = VIVID_CID_U32_DYN_ARRAY,
+ .name = "U32 Dynamic Array",
+ .type = V4L2_CTRL_TYPE_U32,
+ .flags = V4L2_CTRL_FLAG_DYNAMIC_ARRAY,
+ .def = 50,
+ .min = 10,
+ .max = 90,
+ .step = 1,
+ .dims = { 100 },
+};
+
static const struct v4l2_ctrl_config vivid_ctrl_u16_matrix = {
.ops = &vivid_user_gen_ctrl_ops,
.id = VIVID_CID_U16_MATRIX,
@@ -1625,6 +1639,7 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
dev->ro_int32 = v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_ro_int32, NULL);
v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_area, NULL);
v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u32_array, NULL);
+ v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u32_dyn_array, NULL);
v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u16_matrix, NULL);
v4l2_ctrl_new_custom(hdl_user_gen, &vivid_ctrl_u8_4d_array, NULL);
--
2.32.0
The number of bits to skip in the slice header can be computed
in the driver by using sps, pps and decode_params information.
This makes it possible to remove Hantro dedicated control.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
drivers/staging/media/hantro/hantro_drv.c | 36 ------------------
.../staging/media/hantro/hantro_g2_hevc_dec.c | 37 ++++++++++++++++++-
include/media/hevc-ctrls.h | 13 -------
3 files changed, 36 insertions(+), 50 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 536c8c374952..5aac3a090480 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -304,26 +304,6 @@ static int hantro_jpeg_s_ctrl(struct v4l2_ctrl *ctrl)
return 0;
}
-static int hantro_hevc_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct hantro_ctx *ctx;
-
- ctx = container_of(ctrl->handler,
- struct hantro_ctx, ctrl_handler);
-
- vpu_debug(1, "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val);
-
- switch (ctrl->id) {
- case V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP:
- ctx->hevc_dec.ctrls.hevc_hdr_skip_length = ctrl->val;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
static const struct v4l2_ctrl_ops hantro_ctrl_ops = {
.try_ctrl = hantro_try_ctrl,
};
@@ -332,10 +312,6 @@ static const struct v4l2_ctrl_ops hantro_jpeg_ctrl_ops = {
.s_ctrl = hantro_jpeg_s_ctrl,
};
-static const struct v4l2_ctrl_ops hantro_hevc_ctrl_ops = {
- .s_ctrl = hantro_hevc_s_ctrl,
-};
-
#define HANTRO_JPEG_ACTIVE_MARKERS (V4L2_JPEG_ACTIVE_MARKER_APP0 | \
V4L2_JPEG_ACTIVE_MARKER_COM | \
V4L2_JPEG_ACTIVE_MARKER_DQT | \
@@ -487,18 +463,6 @@ static const struct hantro_ctrl controls[] = {
.cfg = {
.id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX,
},
- }, {
- .codec = HANTRO_HEVC_DECODER,
- .cfg = {
- .id = V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP,
- .name = "Hantro HEVC slice header skip bytes",
- .type = V4L2_CTRL_TYPE_INTEGER,
- .min = 0,
- .def = 0,
- .max = 0x100,
- .step = 1,
- .ops = &hantro_hevc_ctrl_ops,
- },
}, {
.codec = HANTRO_VP9_DECODER,
.cfg = {
diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index d28653d04d20..233ecd863d5f 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -117,6 +117,41 @@ static void prepare_tile_info_buffer(struct hantro_ctx *ctx)
vpu_debug(1, "%s: no chroma!\n", __func__);
}
+static int compute_header_skip_length(struct hantro_ctx *ctx)
+{
+ const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
+ const struct v4l2_ctrl_hevc_decode_params *decode_params = ctrls->decode_params;
+ const struct v4l2_ctrl_hevc_sps *sps = ctrls->sps;
+ const struct v4l2_ctrl_hevc_pps *pps = ctrls->pps;
+ int skip = 0;
+
+ if (pps->flags & V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT)
+ /* size of pic_output_flag */
+ skip++;
+
+ if (sps->flags & V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE)
+ /* size of pic_order_cnt_lsb */
+ skip += 2;
+
+ if (!(decode_params->flags & V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC)) {
+ /* size of pic_order_cnt_lsb */
+ skip += sps->log2_max_pic_order_cnt_lsb_minus4 + 4;
+
+ /* size of short_term_ref_pic_set_sps_flag */
+ skip++;
+
+ if (decode_params->short_term_ref_pic_set_size)
+ /* size of st_ref_pic_set( num_short_term_ref_pic_sets ) */
+ skip += decode_params->short_term_ref_pic_set_size;
+ else if (sps->num_short_term_ref_pic_sets > 1)
+ skip += fls(sps->num_short_term_ref_pic_sets - 1);
+
+ skip += decode_params->long_term_ref_pic_set_size;
+ }
+
+ return skip;
+}
+
static void set_params(struct hantro_ctx *ctx)
{
const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
@@ -134,7 +169,7 @@ static void set_params(struct hantro_ctx *ctx)
hantro_reg_write(vpu, &g2_output_8_bits, 0);
- hantro_reg_write(vpu, &g2_hdr_skip_length, ctrls->hevc_hdr_skip_length);
+ hantro_reg_write(vpu, &g2_hdr_skip_length, compute_header_skip_length(ctx));
min_log2_cb_size = sps->log2_min_luma_coding_block_size_minus3 + 3;
max_log2_ctb_size = min_log2_cb_size + sps->log2_diff_max_min_luma_coding_block_size;
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 42d16e8a1050..9239e8b649e0 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -465,17 +465,4 @@ struct v4l2_ctrl_hevc_scaling_matrix {
__u8 scaling_list_dc_coef_32x32[2];
};
-/* MPEG-class control IDs specific to the Hantro driver as defined by V4L2 */
-#define V4L2_CID_CODEC_HANTRO_BASE (V4L2_CTRL_CLASS_CODEC | 0x1200)
-/*
- * V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP -
- * the number of data (in bits) to skip in the
- * slice segment header.
- * If non-IDR, the bits to be skipped go from syntax element "pic_output_flag"
- * to before syntax element "slice_temporal_mvp_enabled_flag".
- * If IDR, the skipped bits are just "pic_output_flag"
- * (separate_colour_plane_flag is not supported).
- */
-#define V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP (V4L2_CID_CODEC_HANTRO_BASE + 0)
-
#endif
--
2.32.0
The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of −2^31 to 2^31 − 1, inclusive."
To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 2 +-
drivers/staging/media/hantro/hantro_g2_hevc_dec.c | 7 +++----
drivers/staging/media/hantro/hantro_hevc.c | 2 +-
drivers/staging/media/hantro/hantro_hw.h | 4 ++--
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 4 ++--
include/media/hevc-ctrls.h | 4 ++--
6 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 868669ae6831..3dfb81a93935 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3010,7 +3010,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
* - __u8
- ``colour_plane_id``
-
- * - __u16
+ * - __s32
- ``slice_pic_order_cnt``
-
* - __u8
diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index 5df6f08e26f5..d28653d04d20 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -390,11 +390,10 @@ static int set_ref(struct hantro_ctx *ctx)
!!(pps->flags & V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED));
/*
- * Write POC count diff from current pic. For frame decoding only compute
- * pic_order_cnt[0] and ignore pic_order_cnt[1] used in field-coding.
+ * Write POC count diff from current pic.
*/
for (i = 0; i < decode_params->num_active_dpb_entries && i < ARRAY_SIZE(cur_poc); i++) {
- char poc_diff = decode_params->pic_order_cnt_val - dpb[i].pic_order_cnt[0];
+ char poc_diff = decode_params->pic_order_cnt_val - dpb[i].pic_order_cnt_val;
hantro_reg_write(vpu, &cur_poc[i], poc_diff);
}
@@ -421,7 +420,7 @@ static int set_ref(struct hantro_ctx *ctx)
dpb_longterm_e = 0;
for (i = 0; i < decode_params->num_active_dpb_entries &&
i < (V4L2_HEVC_DPB_ENTRIES_NUM_MAX - 1); i++) {
- luma_addr = hantro_hevc_get_ref_buf(ctx, dpb[i].pic_order_cnt[0]);
+ luma_addr = hantro_hevc_get_ref_buf(ctx, dpb[i].pic_order_cnt_val);
if (!luma_addr)
return -ENOMEM;
diff --git a/drivers/staging/media/hantro/hantro_hevc.c b/drivers/staging/media/hantro/hantro_hevc.c
index 1df87ca88ebf..5984c5fa6f83 100644
--- a/drivers/staging/media/hantro/hantro_hevc.c
+++ b/drivers/staging/media/hantro/hantro_hevc.c
@@ -33,7 +33,7 @@ void hantro_hevc_ref_init(struct hantro_ctx *ctx)
}
dma_addr_t hantro_hevc_get_ref_buf(struct hantro_ctx *ctx,
- int poc)
+ s32 poc)
{
struct hantro_hevc_dec_hw_ctx *hevc_dec = &ctx->hevc_dec;
int i;
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index a2e0f0836281..33d156ccbfeb 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -145,7 +145,7 @@ struct hantro_hevc_dec_hw_ctx {
struct hantro_aux_buf tile_bsd;
struct hantro_aux_buf ref_bufs[NUM_REF_PICTURES];
struct hantro_aux_buf scaling_lists;
- int ref_bufs_poc[NUM_REF_PICTURES];
+ s32 ref_bufs_poc[NUM_REF_PICTURES];
u32 ref_bufs_used;
struct hantro_hevc_dec_ctrls ctrls;
unsigned int num_tile_cols_allocated;
@@ -357,7 +357,7 @@ void hantro_hevc_dec_exit(struct hantro_ctx *ctx);
int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx);
int hantro_hevc_dec_prepare_run(struct hantro_ctx *ctx);
void hantro_hevc_ref_init(struct hantro_ctx *ctx);
-dma_addr_t hantro_hevc_get_ref_buf(struct hantro_ctx *ctx, int poc);
+dma_addr_t hantro_hevc_get_ref_buf(struct hantro_ctx *ctx, s32 poc);
int hantro_hevc_add_ref_buf(struct hantro_ctx *ctx, int poc, dma_addr_t addr);
int hantro_hevc_validate_sps(struct hantro_ctx *ctx, const struct v4l2_ctrl_hevc_sps *sps);
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index 44f385be9f6c..411601975124 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -143,8 +143,8 @@ static void cedrus_h265_frame_info_write_dpb(struct cedrus_ctx *ctx,
for (i = 0; i < num_active_dpb_entries; i++) {
int buffer_index = vb2_find_timestamp(vq, dpb[i].timestamp, 0);
u32 pic_order_cnt[2] = {
- dpb[i].pic_order_cnt[0],
- dpb[i].pic_order_cnt[1]
+ dpb[i].pic_order_cnt_val,
+ dpb[i].pic_order_cnt_val
};
cedrus_h265_frame_info_write_single(ctx, i, dpb[i].field_pic,
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 45734bd8fdfc..01c1795c57a9 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -138,7 +138,7 @@ struct v4l2_hevc_dpb_entry {
__u64 timestamp;
__u8 flags;
__u8 field_pic;
- __u16 pic_order_cnt[2];
+ __s32 pic_order_cnt_val;
__u8 padding[2];
};
@@ -181,7 +181,7 @@ struct v4l2_ctrl_hevc_slice_params {
/* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
__u8 slice_type;
__u8 colour_plane_id;
- __u16 slice_pic_order_cnt;
+ __s32 slice_pic_order_cnt;
__u8 num_ref_idx_l0_active_minus1;
__u8 num_ref_idx_l1_active_minus1;
__u8 collocated_ref_idx;
--
2.32.0
Change HEVC stateless controls names to V4L2_CID_STATELESS_HEVC instead
of V4L2_CID_MPEG_VIDEO_HEVC be coherent with v4l2 naming convention.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 26 +++++++--------
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 32 +++++++++----------
drivers/staging/media/hantro/hantro_drv.c | 26 +++++++--------
drivers/staging/media/hantro/hantro_hevc.c | 8 ++---
drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +++++++-------
.../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +++---
include/media/hevc-ctrls.h | 26 +++++++--------
7 files changed, 76 insertions(+), 76 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index cff742142a55..868669ae6831 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2661,7 +2661,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. _v4l2-mpeg-hevc:
-``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)``
+``V4L2_CID_STATELESS_HEVC_SPS (struct)``
Specifies the Sequence Parameter Set fields (as extracted from the
bitstream) for the associated HEVC slice data.
These bitstream parameters are defined according to :ref:`hevc`.
@@ -2814,7 +2814,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
-``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)``
+``V4L2_CID_STATELESS_HEVC_PPS (struct)``
Specifies the Picture Parameter Set fields (as extracted from the
bitstream) for the associated HEVC slice data.
These bitstream parameters are defined according to :ref:`hevc`.
@@ -2967,7 +2967,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
-``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
+``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)``
Specifies various slice-specific parameters, especially from the NAL unit
header, general slice segment header and weighted prediction parameter
parts of the bitstream.
@@ -3132,7 +3132,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
-``V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (struct)``
+``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)``
Specifies the HEVC scaling matrix parameters used for the scaling process
for transform coefficients.
These matrix and parameters are defined according to :ref:`hevc`.
@@ -3282,7 +3282,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
-``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)``
+``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)``
Specifies the decoding mode to use. Currently exposes slice-based and
frame-based decoding but new modes might be added later on.
This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
@@ -3297,7 +3297,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
This menu control is not yet part of the public kernel API and
it is expected to change.
-.. c:type:: v4l2_mpeg_video_hevc_decode_mode
+.. c:type:: v4l2_stateless_hevc_decode_mode
.. raw:: latex
@@ -3310,11 +3310,11 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
:stub-columns: 0
:widths: 1 1 2
- * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED``
+ * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED``
- 0
- Decoding is done at the slice granularity.
The OUTPUT buffer must contain a single slice.
- * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED``
+ * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED``
- 1
- Decoding is done at the frame granularity.
The OUTPUT buffer must contain all slices needed to decode the
@@ -3324,7 +3324,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\normalsize
-``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)``
+``V4L2_CID_STATELESS_HEVC_START_CODE (enum)``
Specifies the HEVC slice start code expected for each slice.
This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
@@ -3338,7 +3338,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
This menu control is not yet part of the public kernel API and
it is expected to change.
-.. c:type:: v4l2_mpeg_video_hevc_start_code
+.. c:type:: v4l2_stateless_hevc_start_code
.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}|
@@ -3347,13 +3347,13 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
:stub-columns: 0
:widths: 1 1 2
- * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE``
+ * - ``V4L2_STATELESS_HEVC_START_CODE_NONE``
- 0
- Selecting this value specifies that HEVC slices are passed
to the driver without any start code. The bitstream data should be
according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence
contains emulation prevention bytes when required.
- * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B``
+ * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B``
- 1
- Selecting this value specifies that HEVC slices are expected
to be prefixed by Annex B start codes. According to :ref:`hevc`
@@ -3386,7 +3386,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
This provides a bitmask which consists of bits [0, LTR_COUNT-1].
This is applicable to the H264 and HEVC encoders.
-``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS (struct)``
+``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)``
Specifies various decode parameters, especially the references picture order
count (POC) for all the lists (short, long, before, current, after) and the
number of entries for each of them.
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
index 16f42d2fd359..9f55503cd3d6 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
@@ -704,9 +704,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
return hevc_tier;
case V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE:
return hevc_loop_filter_mode;
- case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE:
+ case V4L2_CID_STATELESS_HEVC_DECODE_MODE:
return hevc_decode_mode;
- case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE:
+ case V4L2_CID_STATELESS_HEVC_START_CODE:
return hevc_start_code;
case V4L2_CID_CAMERA_ORIENTATION:
return camera_orientation;
@@ -1003,13 +1003,6 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD: return "HEVC Size of Length Field";
case V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES: return "Reference Frames for a P-Frame";
case V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR: return "Prepend SPS and PPS to IDR";
- case V4L2_CID_MPEG_VIDEO_HEVC_SPS: return "HEVC Sequence Parameter Set";
- case V4L2_CID_MPEG_VIDEO_HEVC_PPS: return "HEVC Picture Parameter Set";
- case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: return "HEVC Slice Parameters";
- case V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX: return "HEVC Scaling Matrix";
- case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS: return "HEVC Decode Parameters";
- case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE: return "HEVC Decode Mode";
- case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE: return "HEVC Start Code";
/* CAMERA controls */
/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1188,6 +1181,13 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_STATELESS_MPEG2_QUANTISATION: return "MPEG-2 Quantisation Matrices";
case V4L2_CID_STATELESS_VP9_COMPRESSED_HDR: return "VP9 Probabilities Updates";
case V4L2_CID_STATELESS_VP9_FRAME: return "VP9 Frame Decode Parameters";
+ case V4L2_CID_STATELESS_HEVC_SPS: return "HEVC Sequence Parameter Set";
+ case V4L2_CID_STATELESS_HEVC_PPS: return "HEVC Picture Parameter Set";
+ case V4L2_CID_STATELESS_HEVC_SLICE_PARAMS: return "HEVC Slice Parameters";
+ case V4L2_CID_STATELESS_HEVC_SCALING_MATRIX: return "HEVC Scaling Matrix";
+ case V4L2_CID_STATELESS_HEVC_DECODE_PARAMS: return "HEVC Decode Parameters";
+ case V4L2_CID_STATELESS_HEVC_DECODE_MODE: return "HEVC Decode Mode";
+ case V4L2_CID_STATELESS_HEVC_START_CODE: return "HEVC Start Code";
/* Colorimetry controls */
/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1363,8 +1363,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD:
case V4L2_CID_MPEG_VIDEO_HEVC_TIER:
case V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE:
- case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE:
- case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE:
+ case V4L2_CID_STATELESS_HEVC_DECODE_MODE:
+ case V4L2_CID_STATELESS_HEVC_START_CODE:
case V4L2_CID_STATELESS_H264_DECODE_MODE:
case V4L2_CID_STATELESS_H264_START_CODE:
case V4L2_CID_CAMERA_ORIENTATION:
@@ -1502,19 +1502,19 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_STATELESS_VP8_FRAME:
*type = V4L2_CTRL_TYPE_VP8_FRAME;
break;
- case V4L2_CID_MPEG_VIDEO_HEVC_SPS:
+ case V4L2_CID_STATELESS_HEVC_SPS:
*type = V4L2_CTRL_TYPE_HEVC_SPS;
break;
- case V4L2_CID_MPEG_VIDEO_HEVC_PPS:
+ case V4L2_CID_STATELESS_HEVC_PPS:
*type = V4L2_CTRL_TYPE_HEVC_PPS;
break;
- case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS:
+ case V4L2_CID_STATELESS_HEVC_SLICE_PARAMS:
*type = V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS;
break;
- case V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX:
+ case V4L2_CID_STATELESS_HEVC_SCALING_MATRIX:
*type = V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX;
break;
- case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS:
+ case V4L2_CID_STATELESS_HEVC_DECODE_PARAMS:
*type = V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS;
break;
case V4L2_CID_STATELESS_VP9_COMPRESSED_HDR:
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 01d33dcb0467..536c8c374952 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -270,7 +270,7 @@ static int hantro_try_ctrl(struct v4l2_ctrl *ctrl)
if (sps->bit_depth_luma_minus8 != 0)
/* Only 8-bit is supported */
return -EINVAL;
- } else if (ctrl->id == V4L2_CID_MPEG_VIDEO_HEVC_SPS) {
+ } else if (ctrl->id == V4L2_CID_STATELESS_HEVC_SPS) {
const struct v4l2_ctrl_hevc_sps *sps = ctrl->p_new.p_hevc_sps;
return hantro_hevc_validate_sps(ctx, sps);
@@ -438,18 +438,18 @@ static const struct hantro_ctrl controls[] = {
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE,
- .min = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED,
- .max = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED,
- .def = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED,
+ .id = V4L2_CID_STATELESS_HEVC_DECODE_MODE,
+ .min = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
+ .max = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
+ .def = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
},
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_START_CODE,
- .min = V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B,
- .max = V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B,
- .def = V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B,
+ .id = V4L2_CID_STATELESS_HEVC_START_CODE,
+ .min = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
+ .max = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
+ .def = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
},
}, {
.codec = HANTRO_HEVC_DECODER,
@@ -469,23 +469,23 @@ static const struct hantro_ctrl controls[] = {
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_SPS,
+ .id = V4L2_CID_STATELESS_HEVC_SPS,
.ops = &hantro_ctrl_ops,
},
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_PPS,
+ .id = V4L2_CID_STATELESS_HEVC_PPS,
},
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS,
+ .id = V4L2_CID_STATELESS_HEVC_DECODE_PARAMS,
},
}, {
.codec = HANTRO_HEVC_DECODER,
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX,
+ .id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX,
},
}, {
.codec = HANTRO_HEVC_DECODER,
diff --git a/drivers/staging/media/hantro/hantro_hevc.c b/drivers/staging/media/hantro/hantro_hevc.c
index bd924896e409..1df87ca88ebf 100644
--- a/drivers/staging/media/hantro/hantro_hevc.c
+++ b/drivers/staging/media/hantro/hantro_hevc.c
@@ -189,17 +189,17 @@ int hantro_hevc_dec_prepare_run(struct hantro_ctx *ctx)
hantro_start_prepare_run(ctx);
ctrls->decode_params =
- hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS);
+ hantro_get_ctrl(ctx, V4L2_CID_STATELESS_HEVC_DECODE_PARAMS);
if (WARN_ON(!ctrls->decode_params))
return -EINVAL;
ctrls->scaling =
- hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX);
+ hantro_get_ctrl(ctx, V4L2_CID_STATELESS_HEVC_SCALING_MATRIX);
if (WARN_ON(!ctrls->scaling))
return -EINVAL;
ctrls->sps =
- hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SPS);
+ hantro_get_ctrl(ctx, V4L2_CID_STATELESS_HEVC_SPS);
if (WARN_ON(!ctrls->sps))
return -EINVAL;
@@ -208,7 +208,7 @@ int hantro_hevc_dec_prepare_run(struct hantro_ctx *ctx)
return ret;
ctrls->pps =
- hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_PPS);
+ hantro_get_ctrl(ctx, V4L2_CID_STATELESS_HEVC_PPS);
if (WARN_ON(!ctrls->pps))
return -EINVAL;
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 68b3dcdb5df3..87be975a72b6 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -42,7 +42,7 @@ static int cedrus_try_ctrl(struct v4l2_ctrl *ctrl)
if (sps->bit_depth_luma_minus8 != 0)
/* Only 8-bit is supported */
return -EINVAL;
- } else if (ctrl->id == V4L2_CID_MPEG_VIDEO_HEVC_SPS) {
+ } else if (ctrl->id == V4L2_CID_STATELESS_HEVC_SPS) {
const struct v4l2_ctrl_hevc_sps *sps = ctrl->p_new.p_hevc_sps;
struct cedrus_ctx *ctx = container_of(ctrl->handler, struct cedrus_ctx, hdl);
@@ -164,42 +164,42 @@ static const struct cedrus_control cedrus_controls[] = {
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_SPS,
+ .id = V4L2_CID_STATELESS_HEVC_SPS,
.ops = &cedrus_ctrl_ops,
},
.codec = CEDRUS_CODEC_H265,
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_PPS,
+ .id = V4L2_CID_STATELESS_HEVC_PPS,
},
.codec = CEDRUS_CODEC_H265,
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS,
+ .id = V4L2_CID_STATELESS_HEVC_SLICE_PARAMS,
},
.codec = CEDRUS_CODEC_H265,
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX,
+ .id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX,
},
.codec = CEDRUS_CODEC_H265,
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE,
- .max = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED,
- .def = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED,
+ .id = V4L2_CID_STATELESS_HEVC_DECODE_MODE,
+ .max = V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
+ .def = V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
},
.codec = CEDRUS_CODEC_H265,
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_START_CODE,
- .max = V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE,
- .def = V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE,
+ .id = V4L2_CID_STATELESS_HEVC_START_CODE,
+ .max = V4L2_STATELESS_HEVC_START_CODE_NONE,
+ .def = V4L2_STATELESS_HEVC_START_CODE_NONE,
},
.codec = CEDRUS_CODEC_H265,
},
@@ -211,7 +211,7 @@ static const struct cedrus_control cedrus_controls[] = {
},
{
.cfg = {
- .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS,
+ .id = V4L2_CID_STATELESS_HEVC_DECODE_PARAMS,
},
.codec = CEDRUS_CODEC_H265,
},
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
index 9c7200299465..aabe6253078e 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
@@ -65,15 +65,15 @@ void cedrus_device_run(void *priv)
case V4L2_PIX_FMT_HEVC_SLICE:
run.h265.sps = cedrus_find_control_data(ctx,
- V4L2_CID_MPEG_VIDEO_HEVC_SPS);
+ V4L2_CID_STATELESS_HEVC_SPS);
run.h265.pps = cedrus_find_control_data(ctx,
- V4L2_CID_MPEG_VIDEO_HEVC_PPS);
+ V4L2_CID_STATELESS_HEVC_PPS);
run.h265.slice_params = cedrus_find_control_data(ctx,
- V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS);
+ V4L2_CID_STATELESS_HEVC_SLICE_PARAMS);
run.h265.decode_params = cedrus_find_control_data(ctx,
- V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS);
+ V4L2_CID_STATELESS_HEVC_DECODE_PARAMS);
run.h265.scaling_matrix = cedrus_find_control_data(ctx,
- V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX);
+ V4L2_CID_STATELESS_HEVC_SCALING_MATRIX);
break;
case V4L2_PIX_FMT_VP8_FRAME:
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 752a8d10782c..45734bd8fdfc 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -16,13 +16,13 @@
/* The pixel format isn't stable at the moment and will likely be renamed. */
#define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */
-#define V4L2_CID_MPEG_VIDEO_HEVC_SPS (V4L2_CID_CODEC_BASE + 1008)
-#define V4L2_CID_MPEG_VIDEO_HEVC_PPS (V4L2_CID_CODEC_BASE + 1009)
-#define V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_BASE + 1010)
-#define V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_BASE + 1011)
-#define V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_BASE + 1012)
-#define V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (V4L2_CID_CODEC_BASE + 1015)
-#define V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (V4L2_CID_CODEC_BASE + 1016)
+#define V4L2_CID_STATELESS_HEVC_SPS (V4L2_CID_CODEC_BASE + 1008)
+#define V4L2_CID_STATELESS_HEVC_PPS (V4L2_CID_CODEC_BASE + 1009)
+#define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_BASE + 1010)
+#define V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_BASE + 1011)
+#define V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_BASE + 1012)
+#define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_BASE + 1015)
+#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_BASE + 1016)
/* enum v4l2_ctrl_type type values */
#define V4L2_CTRL_TYPE_HEVC_SPS 0x0120
@@ -31,14 +31,14 @@
#define V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX 0x0123
#define V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS 0x0124
-enum v4l2_mpeg_video_hevc_decode_mode {
- V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED,
- V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED,
+enum v4l2_stateless_hevc_decode_mode {
+ V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
+ V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
};
-enum v4l2_mpeg_video_hevc_start_code {
- V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE,
- V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B,
+enum v4l2_stateless_hevc_start_code {
+ V4L2_STATELESS_HEVC_START_CODE_NONE,
+ V4L2_STATELESS_HEVC_START_CODE_ANNEX_B,
};
#define V4L2_HEVC_SLICE_TYPE_B 0
--
2.32.0
Move the HEVC stateless controls types out of staging,
and re-number them.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../userspace-api/media/videodev2.h.rst.exceptions | 5 +++++
include/media/hevc-ctrls.h | 7 -------
include/uapi/linux/videodev2.h | 6 ++++++
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
index 0b91200776f8..2feea4a5a008 100644
--- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
+++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
@@ -153,6 +153,11 @@ replace symbol V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_VP9_FRAME :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_HDR10_CLL_INFO :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
# V4L2 capability defines
replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 3a6601a46ced..42d16e8a1050 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -22,13 +22,6 @@
#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_BASE + 1016)
#define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_BASE + 1017)
-/* enum v4l2_ctrl_type type values */
-#define V4L2_CTRL_TYPE_HEVC_SPS 0x0120
-#define V4L2_CTRL_TYPE_HEVC_PPS 0x0121
-#define V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS 0x0122
-#define V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX 0x0123
-#define V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS 0x0124
-
enum v4l2_stateless_hevc_decode_mode {
V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED,
V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED,
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 37f9f23a67fe..e0d19a6b5bc7 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1836,6 +1836,12 @@ enum v4l2_ctrl_type {
V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR = 0x0260,
V4L2_CTRL_TYPE_VP9_FRAME = 0x0261,
+
+ V4L2_CTRL_TYPE_HEVC_SPS = 0x0270,
+ V4L2_CTRL_TYPE_HEVC_PPS = 0x0271,
+ V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS = 0x0272,
+ V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX = 0x0273,
+ V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS = 0x0274,
};
/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
--
2.32.0
Fix padding where needed to remove holes and stay aligned on cache boundaries
Signed-off-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 6 ++---
drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 -------------
include/media/hevc-ctrls.h | 22 ++++++++++++-------
3 files changed, 17 insertions(+), 26 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 59e751c38d06..d5ef91ae3539 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3513,9 +3513,6 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
* - __u8
- ``num_active_dpb_entries``
- The number of entries in ``dpb``.
- * - struct :c:type:`v4l2_hevc_dpb_entry`
- - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- - The decoded picture buffer, for meta-data about reference frames.
* - __u8
- ``num_poc_st_curr_before``
- The number of reference pictures in the short-term set that come before
@@ -3539,6 +3536,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- PocLtCurr as described in section 8.3.2 "Decoding process for reference
picture set": provides the index of the long term references in DPB array.
+ * - struct :c:type:`v4l2_hevc_dpb_entry`
+ - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The decoded picture buffer, for meta-data about reference frames.
* - __u64
- ``flags``
- See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
index c5c5407584ff..1f85828d6694 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
@@ -536,7 +536,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
struct v4l2_ctrl_hevc_sps *p_hevc_sps;
struct v4l2_ctrl_hevc_pps *p_hevc_pps;
- struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering;
struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params;
struct v4l2_area *area;
@@ -814,8 +813,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
p_hevc_pps->pps_beta_offset_div2 = 0;
p_hevc_pps->pps_tc_offset_div2 = 0;
}
-
- zero_padding(*p_hevc_pps);
break;
case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
@@ -824,21 +821,9 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
if (p_hevc_decode_params->num_active_dpb_entries >
V4L2_HEVC_DPB_ENTRIES_NUM_MAX)
return -EINVAL;
-
- for (i = 0; i < p_hevc_decode_params->num_active_dpb_entries;
- i++) {
- struct v4l2_hevc_dpb_entry *dpb_entry =
- &p_hevc_decode_params->dpb[i];
-
- zero_padding(*dpb_entry);
- }
break;
case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
- p_hevc_slice_params = p;
-
- zero_padding(p_hevc_slice_params->pred_weight_table);
- zero_padding(*p_hevc_slice_params);
break;
case V4L2_CTRL_TYPE_HDR10_CLL_INFO:
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 9239e8b649e0..7358cbfc3e4d 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -105,6 +105,7 @@ enum v4l2_stateless_hevc_start_code {
* @chroma_format_idc: specifies the chroma sampling
* @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
* of temporal sub-layers
+ * @reserved: padding field. Should be zeroed by applications.
* @flags: see V4L2_HEVC_SPS_FLAG_{}
*/
struct v4l2_ctrl_hevc_sps {
@@ -133,6 +134,7 @@ struct v4l2_ctrl_hevc_sps {
__u8 chroma_format_idc;
__u8 sps_max_sub_layers_minus1;
+ __u8 reserved[6];
__u64 flags;
};
@@ -192,6 +194,7 @@ struct v4l2_ctrl_hevc_sps {
* divided by 2
* @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
* the variable Log2ParMrgLevel
+ * @reserved: padding field. Should be zeroed by applications.
* @flags: see V4L2_HEVC_PPS_FLAG_{}
*/
struct v4l2_ctrl_hevc_pps {
@@ -210,8 +213,7 @@ struct v4l2_ctrl_hevc_pps {
__s8 pps_beta_offset_div2;
__s8 pps_tc_offset_div2;
__u8 log2_parallel_merge_level_minus2;
-
- __u8 padding[4];
+ __u8 reserved;
__u64 flags;
};
@@ -239,14 +241,15 @@ struct v4l2_ctrl_hevc_pps {
* @timestamp: timestamp of the V4L2 capture buffer to use as reference.
* @flags: long term flag for the reference frame
* @field_pic: whether the reference is a field picture or a frame.
+ * @reserved: padding field. Should be zeroed by applications.
* @pic_order_cnt_val: the picture order count of the reference.
*/
struct v4l2_hevc_dpb_entry {
__u64 timestamp;
__u8 flags;
__u8 field_pic;
+ __u16 reserved;
__s32 pic_order_cnt_val;
- __u8 padding[2];
};
/**
@@ -285,8 +288,6 @@ struct v4l2_hevc_pred_weight_table {
__s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
__s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
- __u8 padding[6];
-
__u8 luma_log2_weight_denom;
__s8 delta_chroma_log2_weight_denom;
};
@@ -339,6 +340,7 @@ struct v4l2_hevc_pred_weight_table {
* @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
* @pic_struct: indicates whether a picture should be displayed as a frame or as one or
* more fields
+ * @reserved0: padding field. Should be zeroed by applications.
* @slice_segment_addr: specifies the address of the first coding tree block in
* the slice segment
* @ref_idx_l0: the list of L0 reference elements as indices in the DPB
@@ -349,6 +351,7 @@ struct v4l2_hevc_pred_weight_table {
* picture include in the SPS
* @pred_weight_table: the prediction weight coefficients for inter-picture
* prediction
+ * @reserved1: padding field. Should be zeroed by applications.
* @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
*/
struct v4l2_ctrl_hevc_slice_params {
@@ -379,17 +382,18 @@ struct v4l2_ctrl_hevc_slice_params {
/* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
__u8 pic_struct;
+ __u8 reserved0[3];
/* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
__u32 slice_segment_addr;
__u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u16 short_term_ref_pic_set_size;
__u16 long_term_ref_pic_set_size;
- __u8 padding;
/* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
struct v4l2_hevc_pred_weight_table pred_weight_table;
+ __u8 reserved1[2];
__u64 flags;
};
@@ -406,7 +410,6 @@ struct v4l2_ctrl_hevc_slice_params {
* @long_term_ref_pic_set_size: specifies the size of long-term reference
* pictures set include in the SPS of the first slice
* @num_active_dpb_entries: the number of entries in dpb
- * @dpb: the decoded picture buffer, for meta-data about reference frames
* @num_poc_st_curr_before: the number of reference pictures in the short-term
* set that come before the current frame
* @num_poc_st_curr_after: the number of reference pictures in the short-term
@@ -417,6 +420,8 @@ struct v4l2_ctrl_hevc_slice_params {
* @poc_st_curr_after: provides the index of the short term after references
* in DPB array
* @poc_lt_curr: provides the index of the long term references in DPB array
+ * @reserved: padding field. Should be zeroed by applications.
+ * @dpb: the decoded picture buffer, for meta-data about reference frames
* @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
*/
struct v4l2_ctrl_hevc_decode_params {
@@ -424,13 +429,14 @@ struct v4l2_ctrl_hevc_decode_params {
__u16 short_term_ref_pic_set_size;
__u16 long_term_ref_pic_set_size;
__u8 num_active_dpb_entries;
- struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 num_poc_st_curr_before;
__u8 num_poc_st_curr_after;
__u8 num_poc_lt_curr;
__u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
+ __u8 reserved[4];
+ struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
__u64 flags;
};
--
2.32.0
Make explicit that V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control is
a dynamic array control type.
Some drivers may be able to receive multiple slices in one control
to improve decoding performance.
Signed-off-by: Benjamin Gaignard <[email protected]>
---
Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 2 ++
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 1 +
drivers/staging/media/sunxi/cedrus/cedrus.c | 2 ++
include/media/hevc-ctrls.h | 3 +++
4 files changed, 8 insertions(+)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index e88b5e6944a6..c2e0adece613 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2986,6 +2986,8 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
These bitstream parameters are defined according to :ref:`hevc`.
They are described in section 7.4.7 "General slice segment header
semantics" of the specification.
+ This control is a dynamically sized 1-dimensional array,
+ V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
.. c:type:: v4l2_ctrl_hevc_slice_params
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
index 9f55503cd3d6..d594efbcbb93 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
@@ -1510,6 +1510,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
break;
case V4L2_CID_STATELESS_HEVC_SLICE_PARAMS:
*type = V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS;
+ *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY;
break;
case V4L2_CID_STATELESS_HEVC_SCALING_MATRIX:
*type = V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX;
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 87be975a72b6..b12219123a6b 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -178,6 +178,8 @@ static const struct cedrus_control cedrus_controls[] = {
{
.cfg = {
.id = V4L2_CID_STATELESS_HEVC_SLICE_PARAMS,
+ /* The driver can only handle 1 entry per slice for now */
+ .dims = { 1 },
},
.codec = CEDRUS_CODEC_H265,
},
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 57053cfa099b..341fc795d550 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -314,6 +314,9 @@ struct v4l2_hevc_pred_weight_table {
/**
* struct v4l2_ctrl_hevc_slice_params - HEVC slice parameters
*
+ * This control is a dynamically sized 1-dimensional array,
+ * V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
+ *
* @bit_size: size (in bits) of the current slice data
* @data_bit_offset: offset (in bits) to the video data in the current slice data
* @nal_unit_type: specifies the coding type of the slice (B, P or I)
--
2.32.0
'F.7.3.6.1 General slice segment header syntax' section of HEVC
specification describes that a slice header always end aligned on
byte boundary, therefore we only need to provide the data offset in bytes.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 4 ++--
.../staging/media/sunxi/cedrus/cedrus_h265.c | 19 ++++++++++++++++++-
.../staging/media/sunxi/cedrus/cedrus_video.c | 1 -
include/media/hevc-ctrls.h | 4 ++--
4 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index d5ef91ae3539..f012673a3e64 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3008,8 +3008,8 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``bit_size``
- Size (in bits) of the current slice data.
* - __u32
- - ``data_bit_offset``
- - Offset (in bits) to the video data in the current slice data.
+ - ``data_byte_offset``
+ - Offset (in bytes) to the video data in the current slice data.
* - __u32
- ``num_entry_point_offsets``
- Specifies the number of entry point offset syntax elements in the slice header.
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index 411601975124..7b67cb4621cf 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -317,6 +317,8 @@ static void cedrus_h265_setup(struct cedrus_ctx *ctx,
u32 chroma_log2_weight_denom;
u32 output_pic_list_index;
u32 pic_order_cnt[2];
+ u8 *padding;
+ int count;
u32 reg;
sps = run->h265.sps;
@@ -405,7 +407,22 @@ static void cedrus_h265_setup(struct cedrus_ctx *ctx,
/* Initialize bitstream access. */
cedrus_write(dev, VE_DEC_H265_TRIGGER, VE_DEC_H265_TRIGGER_INIT_SWDEC);
- cedrus_h265_skip_bits(dev, slice_params->data_bit_offset);
+ /*
+ * Cedrus expects that bitstream pointer is actually at the end of the slice header
+ * instead of start of slice data. Padding is 8 bits at most (one bit set to 1 and
+ * at most seven bits set to 0), so we have to inspect only one byte before slice data.
+ */
+ padding = (u8 *)vb2_plane_vaddr(&run->src->vb2_buf, 0) +
+ slice_params->data_byte_offset - 1;
+
+ for (count = 0; count < 8; count++)
+ if (*padding & (1 << count))
+ break;
+
+ /* Include the one bit. */
+ count++;
+
+ cedrus_h265_skip_bits(dev, slice_params->data_byte_offset * 8 - count);
/* Bitstream parameters. */
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index 33726175d980..66714609b577 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -568,7 +568,6 @@ int cedrus_queue_init(void *priv, struct vb2_queue *src_vq,
src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
- src_vq->dma_attrs = DMA_ATTR_NO_KERNEL_MAPPING;
src_vq->drv_priv = ctx;
src_vq->buf_struct_size = sizeof(struct cedrus_buffer);
src_vq->ops = &cedrus_qops;
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 7358cbfc3e4d..c89029b3c5da 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -310,7 +310,7 @@ struct v4l2_hevc_pred_weight_table {
* V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
*
* @bit_size: size (in bits) of the current slice data
- * @data_bit_offset: offset (in bits) to the video data in the current slice data
+ * @data_byte_offset: offset (in bytes) to the video data in the current slice data
* @num_entry_point_offsets: specifies the number of entry point offset syntax
* elements in the slice header.
* @nal_unit_type: specifies the coding type of the slice (B, P or I)
@@ -356,7 +356,7 @@ struct v4l2_hevc_pred_weight_table {
*/
struct v4l2_ctrl_hevc_slice_params {
__u32 bit_size;
- __u32 data_bit_offset;
+ __u32 data_byte_offset;
__u32 num_entry_point_offsets;
/* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */
__u8 nal_unit_type;
--
2.32.0
Simply print the type of the control.
Signed-off-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
---
drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
index ff8a61f24d0a..c5c5407584ff 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
@@ -307,6 +307,21 @@ static void std_log(const struct v4l2_ctrl *ctrl)
case V4L2_CTRL_TYPE_VP9_FRAME:
pr_cont("VP9_FRAME");
break;
+ case V4L2_CTRL_TYPE_HEVC_SPS:
+ pr_cont("HEVC_SPS");
+ break;
+ case V4L2_CTRL_TYPE_HEVC_PPS:
+ pr_cont("HEVC_PPS");
+ break;
+ case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
+ pr_cont("HEVC_SLICE_PARAMS");
+ break;
+ case V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX:
+ pr_cont("HEVC_SCALING_MATRIX");
+ break;
+ case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
+ pr_cont("HEVC_DECODE_PARAMS");
+ break;
default:
pr_cont("unknown type %d", ctrl->type);
break;
--
2.32.0
On 7/6/22 11:38, Benjamin Gaignard wrote:
> Fix padding where needed to remove holes and stay aligned on cache boundaries
If a v12 is needed, then please drop the " and stay aligned on cache boundaries"
part since that's a left-over from previous versions. I've manually removed it
in my branch so no need to do anything unless a v12 is needed.
Regards,
Hans
>
> Signed-off-by: Benjamin Gaignard <[email protected]>
> Acked-by: Nicolas Dufresne <[email protected]>
> Tested-by: Jernej Skrabec <[email protected]>
> ---
> .../media/v4l/ext-ctrls-codec.rst | 6 ++---
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 -------------
> include/media/hevc-ctrls.h | 22 ++++++++++++-------
> 3 files changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index 59e751c38d06..d5ef91ae3539 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -3513,9 +3513,6 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> * - __u8
> - ``num_active_dpb_entries``
> - The number of entries in ``dpb``.
> - * - struct :c:type:`v4l2_hevc_dpb_entry`
> - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> - - The decoded picture buffer, for meta-data about reference frames.
> * - __u8
> - ``num_poc_st_curr_before``
> - The number of reference pictures in the short-term set that come before
> @@ -3539,6 +3536,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> - PocLtCurr as described in section 8.3.2 "Decoding process for reference
> picture set": provides the index of the long term references in DPB array.
> + * - struct :c:type:`v4l2_hevc_dpb_entry`
> + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> + - The decoded picture buffer, for meta-data about reference frames.
> * - __u64
> - ``flags``
> - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> index c5c5407584ff..1f85828d6694 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> @@ -536,7 +536,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
> struct v4l2_ctrl_hevc_sps *p_hevc_sps;
> struct v4l2_ctrl_hevc_pps *p_hevc_pps;
> - struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
> struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering;
> struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params;
> struct v4l2_area *area;
> @@ -814,8 +813,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> p_hevc_pps->pps_beta_offset_div2 = 0;
> p_hevc_pps->pps_tc_offset_div2 = 0;
> }
> -
> - zero_padding(*p_hevc_pps);
> break;
>
> case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
> @@ -824,21 +821,9 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> if (p_hevc_decode_params->num_active_dpb_entries >
> V4L2_HEVC_DPB_ENTRIES_NUM_MAX)
> return -EINVAL;
> -
> - for (i = 0; i < p_hevc_decode_params->num_active_dpb_entries;
> - i++) {
> - struct v4l2_hevc_dpb_entry *dpb_entry =
> - &p_hevc_decode_params->dpb[i];
> -
> - zero_padding(*dpb_entry);
> - }
> break;
>
> case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
> - p_hevc_slice_params = p;
> -
> - zero_padding(p_hevc_slice_params->pred_weight_table);
> - zero_padding(*p_hevc_slice_params);
> break;
>
> case V4L2_CTRL_TYPE_HDR10_CLL_INFO:
> diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
> index 9239e8b649e0..7358cbfc3e4d 100644
> --- a/include/media/hevc-ctrls.h
> +++ b/include/media/hevc-ctrls.h
> @@ -105,6 +105,7 @@ enum v4l2_stateless_hevc_start_code {
> * @chroma_format_idc: specifies the chroma sampling
> * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
> * of temporal sub-layers
> + * @reserved: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_SPS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_sps {
> @@ -133,6 +134,7 @@ struct v4l2_ctrl_hevc_sps {
> __u8 chroma_format_idc;
> __u8 sps_max_sub_layers_minus1;
>
> + __u8 reserved[6];
> __u64 flags;
> };
>
> @@ -192,6 +194,7 @@ struct v4l2_ctrl_hevc_sps {
> * divided by 2
> * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
> * the variable Log2ParMrgLevel
> + * @reserved: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_PPS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_pps {
> @@ -210,8 +213,7 @@ struct v4l2_ctrl_hevc_pps {
> __s8 pps_beta_offset_div2;
> __s8 pps_tc_offset_div2;
> __u8 log2_parallel_merge_level_minus2;
> -
> - __u8 padding[4];
> + __u8 reserved;
> __u64 flags;
> };
>
> @@ -239,14 +241,15 @@ struct v4l2_ctrl_hevc_pps {
> * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
> * @flags: long term flag for the reference frame
> * @field_pic: whether the reference is a field picture or a frame.
> + * @reserved: padding field. Should be zeroed by applications.
> * @pic_order_cnt_val: the picture order count of the reference.
> */
> struct v4l2_hevc_dpb_entry {
> __u64 timestamp;
> __u8 flags;
> __u8 field_pic;
> + __u16 reserved;
> __s32 pic_order_cnt_val;
> - __u8 padding[2];
> };
>
> /**
> @@ -285,8 +288,6 @@ struct v4l2_hevc_pred_weight_table {
> __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
>
> - __u8 padding[6];
> -
> __u8 luma_log2_weight_denom;
> __s8 delta_chroma_log2_weight_denom;
> };
> @@ -339,6 +340,7 @@ struct v4l2_hevc_pred_weight_table {
> * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
> * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
> * more fields
> + * @reserved0: padding field. Should be zeroed by applications.
> * @slice_segment_addr: specifies the address of the first coding tree block in
> * the slice segment
> * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
> @@ -349,6 +351,7 @@ struct v4l2_hevc_pred_weight_table {
> * picture include in the SPS
> * @pred_weight_table: the prediction weight coefficients for inter-picture
> * prediction
> + * @reserved1: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_slice_params {
> @@ -379,17 +382,18 @@ struct v4l2_ctrl_hevc_slice_params {
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
> __u8 pic_struct;
>
> + __u8 reserved0[3];
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
> __u32 slice_segment_addr;
> __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u16 short_term_ref_pic_set_size;
> __u16 long_term_ref_pic_set_size;
> - __u8 padding;
>
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
> struct v4l2_hevc_pred_weight_table pred_weight_table;
>
> + __u8 reserved1[2];
> __u64 flags;
> };
>
> @@ -406,7 +410,6 @@ struct v4l2_ctrl_hevc_slice_params {
> * @long_term_ref_pic_set_size: specifies the size of long-term reference
> * pictures set include in the SPS of the first slice
> * @num_active_dpb_entries: the number of entries in dpb
> - * @dpb: the decoded picture buffer, for meta-data about reference frames
> * @num_poc_st_curr_before: the number of reference pictures in the short-term
> * set that come before the current frame
> * @num_poc_st_curr_after: the number of reference pictures in the short-term
> @@ -417,6 +420,8 @@ struct v4l2_ctrl_hevc_slice_params {
> * @poc_st_curr_after: provides the index of the short term after references
> * in DPB array
> * @poc_lt_curr: provides the index of the long term references in DPB array
> + * @reserved: padding field. Should be zeroed by applications.
> + * @dpb: the decoded picture buffer, for meta-data about reference frames
> * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
> */
> struct v4l2_ctrl_hevc_decode_params {
> @@ -424,13 +429,14 @@ struct v4l2_ctrl_hevc_decode_params {
> __u16 short_term_ref_pic_set_size;
> __u16 long_term_ref_pic_set_size;
> __u8 num_active_dpb_entries;
> - struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 num_poc_st_curr_before;
> __u8 num_poc_st_curr_after;
> __u8 num_poc_lt_curr;
> __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __u8 reserved[4];
> + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u64 flags;
> };
>
Le 08/07/2022 à 09:03, Hans Verkuil a écrit :
>
> On 7/6/22 11:38, Benjamin Gaignard wrote:
>> Fix padding where needed to remove holes and stay aligned on cache boundaries
> If a v12 is needed, then please drop the " and stay aligned on cache boundaries"
> part since that's a left-over from previous versions. I've manually removed it
> in my branch so no need to do anything unless a v12 is needed.
I think only patch 11 still need your review.
If it is fine we won't need v12.
Regards,
Benjamin
>
> Regards,
>
> Hans
>
>> Signed-off-by: Benjamin Gaignard <[email protected]>
>> Acked-by: Nicolas Dufresne <[email protected]>
>> Tested-by: Jernej Skrabec <[email protected]>
>> ---
>> .../media/v4l/ext-ctrls-codec.rst | 6 ++---
>> drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 -------------
>> include/media/hevc-ctrls.h | 22 ++++++++++++-------
>> 3 files changed, 17 insertions(+), 26 deletions(-)
>>
>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> index 59e751c38d06..d5ef91ae3539 100644
>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> @@ -3513,9 +3513,6 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
>> * - __u8
>> - ``num_active_dpb_entries``
>> - The number of entries in ``dpb``.
>> - * - struct :c:type:`v4l2_hevc_dpb_entry`
>> - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
>> - - The decoded picture buffer, for meta-data about reference frames.
>> * - __u8
>> - ``num_poc_st_curr_before``
>> - The number of reference pictures in the short-term set that come before
>> @@ -3539,6 +3536,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
>> - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
>> - PocLtCurr as described in section 8.3.2 "Decoding process for reference
>> picture set": provides the index of the long term references in DPB array.
>> + * - struct :c:type:`v4l2_hevc_dpb_entry`
>> + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
>> + - The decoded picture buffer, for meta-data about reference frames.
>> * - __u64
>> - ``flags``
>> - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
>> index c5c5407584ff..1f85828d6694 100644
>> --- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
>> +++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
>> @@ -536,7 +536,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
>> struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
>> struct v4l2_ctrl_hevc_sps *p_hevc_sps;
>> struct v4l2_ctrl_hevc_pps *p_hevc_pps;
>> - struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
>> struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering;
>> struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params;
>> struct v4l2_area *area;
>> @@ -814,8 +813,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
>> p_hevc_pps->pps_beta_offset_div2 = 0;
>> p_hevc_pps->pps_tc_offset_div2 = 0;
>> }
>> -
>> - zero_padding(*p_hevc_pps);
>> break;
>>
>> case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
>> @@ -824,21 +821,9 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
>> if (p_hevc_decode_params->num_active_dpb_entries >
>> V4L2_HEVC_DPB_ENTRIES_NUM_MAX)
>> return -EINVAL;
>> -
>> - for (i = 0; i < p_hevc_decode_params->num_active_dpb_entries;
>> - i++) {
>> - struct v4l2_hevc_dpb_entry *dpb_entry =
>> - &p_hevc_decode_params->dpb[i];
>> -
>> - zero_padding(*dpb_entry);
>> - }
>> break;
>>
>> case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
>> - p_hevc_slice_params = p;
>> -
>> - zero_padding(p_hevc_slice_params->pred_weight_table);
>> - zero_padding(*p_hevc_slice_params);
>> break;
>>
>> case V4L2_CTRL_TYPE_HDR10_CLL_INFO:
>> diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
>> index 9239e8b649e0..7358cbfc3e4d 100644
>> --- a/include/media/hevc-ctrls.h
>> +++ b/include/media/hevc-ctrls.h
>> @@ -105,6 +105,7 @@ enum v4l2_stateless_hevc_start_code {
>> * @chroma_format_idc: specifies the chroma sampling
>> * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
>> * of temporal sub-layers
>> + * @reserved: padding field. Should be zeroed by applications.
>> * @flags: see V4L2_HEVC_SPS_FLAG_{}
>> */
>> struct v4l2_ctrl_hevc_sps {
>> @@ -133,6 +134,7 @@ struct v4l2_ctrl_hevc_sps {
>> __u8 chroma_format_idc;
>> __u8 sps_max_sub_layers_minus1;
>>
>> + __u8 reserved[6];
>> __u64 flags;
>> };
>>
>> @@ -192,6 +194,7 @@ struct v4l2_ctrl_hevc_sps {
>> * divided by 2
>> * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
>> * the variable Log2ParMrgLevel
>> + * @reserved: padding field. Should be zeroed by applications.
>> * @flags: see V4L2_HEVC_PPS_FLAG_{}
>> */
>> struct v4l2_ctrl_hevc_pps {
>> @@ -210,8 +213,7 @@ struct v4l2_ctrl_hevc_pps {
>> __s8 pps_beta_offset_div2;
>> __s8 pps_tc_offset_div2;
>> __u8 log2_parallel_merge_level_minus2;
>> -
>> - __u8 padding[4];
>> + __u8 reserved;
>> __u64 flags;
>> };
>>
>> @@ -239,14 +241,15 @@ struct v4l2_ctrl_hevc_pps {
>> * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
>> * @flags: long term flag for the reference frame
>> * @field_pic: whether the reference is a field picture or a frame.
>> + * @reserved: padding field. Should be zeroed by applications.
>> * @pic_order_cnt_val: the picture order count of the reference.
>> */
>> struct v4l2_hevc_dpb_entry {
>> __u64 timestamp;
>> __u8 flags;
>> __u8 field_pic;
>> + __u16 reserved;
>> __s32 pic_order_cnt_val;
>> - __u8 padding[2];
>> };
>>
>> /**
>> @@ -285,8 +288,6 @@ struct v4l2_hevc_pred_weight_table {
>> __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
>> __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
>>
>> - __u8 padding[6];
>> -
>> __u8 luma_log2_weight_denom;
>> __s8 delta_chroma_log2_weight_denom;
>> };
>> @@ -339,6 +340,7 @@ struct v4l2_hevc_pred_weight_table {
>> * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
>> * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
>> * more fields
>> + * @reserved0: padding field. Should be zeroed by applications.
>> * @slice_segment_addr: specifies the address of the first coding tree block in
>> * the slice segment
>> * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
>> @@ -349,6 +351,7 @@ struct v4l2_hevc_pred_weight_table {
>> * picture include in the SPS
>> * @pred_weight_table: the prediction weight coefficients for inter-picture
>> * prediction
>> + * @reserved1: padding field. Should be zeroed by applications.
>> * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
>> */
>> struct v4l2_ctrl_hevc_slice_params {
>> @@ -379,17 +382,18 @@ struct v4l2_ctrl_hevc_slice_params {
>> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
>> __u8 pic_struct;
>>
>> + __u8 reserved0[3];
>> /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
>> __u32 slice_segment_addr;
>> __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u16 short_term_ref_pic_set_size;
>> __u16 long_term_ref_pic_set_size;
>> - __u8 padding;
>>
>> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
>> struct v4l2_hevc_pred_weight_table pred_weight_table;
>>
>> + __u8 reserved1[2];
>> __u64 flags;
>> };
>>
>> @@ -406,7 +410,6 @@ struct v4l2_ctrl_hevc_slice_params {
>> * @long_term_ref_pic_set_size: specifies the size of long-term reference
>> * pictures set include in the SPS of the first slice
>> * @num_active_dpb_entries: the number of entries in dpb
>> - * @dpb: the decoded picture buffer, for meta-data about reference frames
>> * @num_poc_st_curr_before: the number of reference pictures in the short-term
>> * set that come before the current frame
>> * @num_poc_st_curr_after: the number of reference pictures in the short-term
>> @@ -417,6 +420,8 @@ struct v4l2_ctrl_hevc_slice_params {
>> * @poc_st_curr_after: provides the index of the short term after references
>> * in DPB array
>> * @poc_lt_curr: provides the index of the long term references in DPB array
>> + * @reserved: padding field. Should be zeroed by applications.
>> + * @dpb: the decoded picture buffer, for meta-data about reference frames
>> * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
>> */
>> struct v4l2_ctrl_hevc_decode_params {
>> @@ -424,13 +429,14 @@ struct v4l2_ctrl_hevc_decode_params {
>> __u16 short_term_ref_pic_set_size;
>> __u16 long_term_ref_pic_set_size;
>> __u8 num_active_dpb_entries;
>> - struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u8 num_poc_st_curr_before;
>> __u8 num_poc_st_curr_after;
>> __u8 num_poc_lt_curr;
>> __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> + __u8 reserved[4];
>> + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
>> __u64 flags;
>> };
>>
On Wed, Jul 06, 2022 at 11:37:59AM +0200, Benjamin Gaignard wrote:
> Simply print the type of the control.
>
> Signed-off-by: Benjamin Gaignard <[email protected]>
> Acked-by: Nicolas Dufresne <[email protected]>
> Tested-by: Jernej Skrabec <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> index ff8a61f24d0a..c5c5407584ff 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> @@ -307,6 +307,21 @@ static void std_log(const struct v4l2_ctrl *ctrl)
> case V4L2_CTRL_TYPE_VP9_FRAME:
> pr_cont("VP9_FRAME");
> break;
> + case V4L2_CTRL_TYPE_HEVC_SPS:
> + pr_cont("HEVC_SPS");
> + break;
> + case V4L2_CTRL_TYPE_HEVC_PPS:
> + pr_cont("HEVC_PPS");
> + break;
> + case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
> + pr_cont("HEVC_SLICE_PARAMS");
> + break;
> + case V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX:
> + pr_cont("HEVC_SCALING_MATRIX");
> + break;
> + case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
> + pr_cont("HEVC_DECODE_PARAMS");
> + break;
> default:
> pr_cont("unknown type %d", ctrl->type);
> break;
> --
> 2.32.0
>
On Wed, Jul 06, 2022 at 11:38:01AM +0200, Benjamin Gaignard wrote:
> Fix padding where needed to remove holes and stay aligned on cache boundaries
>
> Signed-off-by: Benjamin Gaignard <[email protected]>
> Acked-by: Nicolas Dufresne <[email protected]>
> Tested-by: Jernej Skrabec <[email protected]>
I've checked the holes using pahole and it looks good.
Reviewed-by: Ezequiel Garcia <[email protected]>
Thanks,
Ezequiel
> ---
> .../media/v4l/ext-ctrls-codec.rst | 6 ++---
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 15 -------------
> include/media/hevc-ctrls.h | 22 ++++++++++++-------
> 3 files changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index 59e751c38d06..d5ef91ae3539 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -3513,9 +3513,6 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> * - __u8
> - ``num_active_dpb_entries``
> - The number of entries in ``dpb``.
> - * - struct :c:type:`v4l2_hevc_dpb_entry`
> - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> - - The decoded picture buffer, for meta-data about reference frames.
> * - __u8
> - ``num_poc_st_curr_before``
> - The number of reference pictures in the short-term set that come before
> @@ -3539,6 +3536,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> - PocLtCurr as described in section 8.3.2 "Decoding process for reference
> picture set": provides the index of the long term references in DPB array.
> + * - struct :c:type:`v4l2_hevc_dpb_entry`
> + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> + - The decoded picture buffer, for meta-data about reference frames.
> * - __u64
> - ``flags``
> - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> index c5c5407584ff..1f85828d6694 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> @@ -536,7 +536,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
> struct v4l2_ctrl_hevc_sps *p_hevc_sps;
> struct v4l2_ctrl_hevc_pps *p_hevc_pps;
> - struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
> struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering;
> struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params;
> struct v4l2_area *area;
> @@ -814,8 +813,6 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> p_hevc_pps->pps_beta_offset_div2 = 0;
> p_hevc_pps->pps_tc_offset_div2 = 0;
> }
> -
> - zero_padding(*p_hevc_pps);
> break;
>
> case V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS:
> @@ -824,21 +821,9 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> if (p_hevc_decode_params->num_active_dpb_entries >
> V4L2_HEVC_DPB_ENTRIES_NUM_MAX)
> return -EINVAL;
> -
> - for (i = 0; i < p_hevc_decode_params->num_active_dpb_entries;
> - i++) {
> - struct v4l2_hevc_dpb_entry *dpb_entry =
> - &p_hevc_decode_params->dpb[i];
> -
> - zero_padding(*dpb_entry);
> - }
> break;
>
> case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
> - p_hevc_slice_params = p;
> -
> - zero_padding(p_hevc_slice_params->pred_weight_table);
> - zero_padding(*p_hevc_slice_params);
> break;
>
> case V4L2_CTRL_TYPE_HDR10_CLL_INFO:
> diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
> index 9239e8b649e0..7358cbfc3e4d 100644
> --- a/include/media/hevc-ctrls.h
> +++ b/include/media/hevc-ctrls.h
> @@ -105,6 +105,7 @@ enum v4l2_stateless_hevc_start_code {
> * @chroma_format_idc: specifies the chroma sampling
> * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number
> * of temporal sub-layers
> + * @reserved: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_SPS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_sps {
> @@ -133,6 +134,7 @@ struct v4l2_ctrl_hevc_sps {
> __u8 chroma_format_idc;
> __u8 sps_max_sub_layers_minus1;
>
> + __u8 reserved[6];
> __u64 flags;
> };
>
> @@ -192,6 +194,7 @@ struct v4l2_ctrl_hevc_sps {
> * divided by 2
> * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of
> * the variable Log2ParMrgLevel
> + * @reserved: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_PPS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_pps {
> @@ -210,8 +213,7 @@ struct v4l2_ctrl_hevc_pps {
> __s8 pps_beta_offset_div2;
> __s8 pps_tc_offset_div2;
> __u8 log2_parallel_merge_level_minus2;
> -
> - __u8 padding[4];
> + __u8 reserved;
> __u64 flags;
> };
>
> @@ -239,14 +241,15 @@ struct v4l2_ctrl_hevc_pps {
> * @timestamp: timestamp of the V4L2 capture buffer to use as reference.
> * @flags: long term flag for the reference frame
> * @field_pic: whether the reference is a field picture or a frame.
> + * @reserved: padding field. Should be zeroed by applications.
> * @pic_order_cnt_val: the picture order count of the reference.
> */
> struct v4l2_hevc_dpb_entry {
> __u64 timestamp;
> __u8 flags;
> __u8 field_pic;
> + __u16 reserved;
> __s32 pic_order_cnt_val;
> - __u8 padding[2];
> };
>
> /**
> @@ -285,8 +288,6 @@ struct v4l2_hevc_pred_weight_table {
> __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
>
> - __u8 padding[6];
> -
> __u8 luma_log2_weight_denom;
> __s8 delta_chroma_log2_weight_denom;
> };
> @@ -339,6 +340,7 @@ struct v4l2_hevc_pred_weight_table {
> * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2
> * @pic_struct: indicates whether a picture should be displayed as a frame or as one or
> * more fields
> + * @reserved0: padding field. Should be zeroed by applications.
> * @slice_segment_addr: specifies the address of the first coding tree block in
> * the slice segment
> * @ref_idx_l0: the list of L0 reference elements as indices in the DPB
> @@ -349,6 +351,7 @@ struct v4l2_hevc_pred_weight_table {
> * picture include in the SPS
> * @pred_weight_table: the prediction weight coefficients for inter-picture
> * prediction
> + * @reserved1: padding field. Should be zeroed by applications.
> * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{}
> */
> struct v4l2_ctrl_hevc_slice_params {
> @@ -379,17 +382,18 @@ struct v4l2_ctrl_hevc_slice_params {
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
> __u8 pic_struct;
>
> + __u8 reserved0[3];
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
> __u32 slice_segment_addr;
> __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u16 short_term_ref_pic_set_size;
> __u16 long_term_ref_pic_set_size;
> - __u8 padding;
>
> /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
> struct v4l2_hevc_pred_weight_table pred_weight_table;
>
> + __u8 reserved1[2];
> __u64 flags;
> };
>
> @@ -406,7 +410,6 @@ struct v4l2_ctrl_hevc_slice_params {
> * @long_term_ref_pic_set_size: specifies the size of long-term reference
> * pictures set include in the SPS of the first slice
> * @num_active_dpb_entries: the number of entries in dpb
> - * @dpb: the decoded picture buffer, for meta-data about reference frames
> * @num_poc_st_curr_before: the number of reference pictures in the short-term
> * set that come before the current frame
> * @num_poc_st_curr_after: the number of reference pictures in the short-term
> @@ -417,6 +420,8 @@ struct v4l2_ctrl_hevc_slice_params {
> * @poc_st_curr_after: provides the index of the short term after references
> * in DPB array
> * @poc_lt_curr: provides the index of the long term references in DPB array
> + * @reserved: padding field. Should be zeroed by applications.
> + * @dpb: the decoded picture buffer, for meta-data about reference frames
> * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{}
> */
> struct v4l2_ctrl_hevc_decode_params {
> @@ -424,13 +429,14 @@ struct v4l2_ctrl_hevc_decode_params {
> __u16 short_term_ref_pic_set_size;
> __u16 long_term_ref_pic_set_size;
> __u8 num_active_dpb_entries;
> - struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 num_poc_st_curr_before;
> __u8 num_poc_st_curr_after;
> __u8 num_poc_lt_curr;
> __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __u8 reserved[4];
> + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> __u64 flags;
> };
>
> --
> 2.32.0
>