Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.
Signed-off-by: Ezequiel Garcia <[email protected]>
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 41 ++++++++--------------
drivers/staging/media/rkvdec/rkvdec-vp9.c | 10 +++---
2 files changed, 19 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 2992fb87cf72..4af5a831bde0 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -109,7 +109,7 @@ struct rkvdec_h264_run {
const struct v4l2_ctrl_h264_sps *sps;
const struct v4l2_ctrl_h264_pps *pps;
const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
- int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
+ struct vb2_buffer *ref_buf[V4L2_H264_NUM_DPB_ENTRIES];
};
struct rkvdec_h264_ctx {
@@ -742,17 +742,16 @@ static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
- int buf_idx = -1;
+ struct vb2_buffer *buf = NULL;
if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) {
- buf_idx = vb2_find_timestamp(cap_q,
- dpb[i].reference_ts, 0);
- if (buf_idx < 0)
+ buf = vb2_find_buffer(cap_q, dpb[i].reference_ts);
+ if (!buf)
pr_debug("No buffer for reference_ts %llu",
dpb[i].reference_ts);
}
- run->ref_buf_idx[i] = buf_idx;
+ run->ref_buf[i] = buf;
}
}
@@ -805,7 +804,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
if (WARN_ON(ref->index >= ARRAY_SIZE(dec_params->dpb)))
continue;
- dpb_valid = run->ref_buf_idx[ref->index] >= 0;
+ dpb_valid = run->ref_buf[ref->index] != NULL;
bottom = ref->fields == V4L2_H264_BOTTOM_FIELD_REF;
set_ps_field(hw_rps, DPB_INFO(i, j),
@@ -881,24 +880,6 @@ static const u32 poc_reg_tbl_bottom_field[16] = {
RKVDEC_REG_H264_POC_REFER2(1)
};
-static struct vb2_buffer *
-get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
- unsigned int dpb_idx)
-{
- struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
- struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
- int buf_idx = run->ref_buf_idx[dpb_idx];
-
- /*
- * If a DPB entry is unused or invalid, address of current destination
- * buffer is returned.
- */
- if (buf_idx < 0)
- return &run->base.bufs.dst->vb2_buf;
-
- return vb2_get_buffer(cap_q, buf_idx);
-}
-
static void config_registers(struct rkvdec_ctx *ctx,
struct rkvdec_h264_run *run)
{
@@ -971,8 +952,14 @@ static void config_registers(struct rkvdec_ctx *ctx,
/* config ref pic address & poc */
for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
- struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
-
+ struct vb2_buffer *vb_buf = run->ref_buf[i];
+
+ /*
+ * If a DPB entry is unused or invalid, address of current destination
+ * buffer is returned.
+ */
+ if (!vb_buf)
+ vb_buf = &dst_buf->vb2_buf;
refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0);
if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
diff --git a/drivers/staging/media/rkvdec/rkvdec-vp9.c b/drivers/staging/media/rkvdec/rkvdec-vp9.c
index c2f42e76be10..d8c1c0db15c7 100644
--- a/drivers/staging/media/rkvdec/rkvdec-vp9.c
+++ b/drivers/staging/media/rkvdec/rkvdec-vp9.c
@@ -383,17 +383,17 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
{
struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
- int buf_idx;
+ struct vb2_buffer *buf;
/*
* If a ref is unused or invalid, address of current destination
* buffer is returned.
*/
- buf_idx = vb2_find_timestamp(cap_q, timestamp, 0);
- if (buf_idx < 0)
- return vb2_to_rkvdec_decoded_buf(&dst->vb2_buf);
+ buf = vb2_find_buffer(cap_q, timestamp);
+ if (!buf)
+ buf = &dst->vb2_buf;
- return vb2_to_rkvdec_decoded_buf(vb2_get_buffer(cap_q, buf_idx));
+ return vb2_to_rkvdec_decoded_buf(buf);
}
static dma_addr_t get_mv_base_addr(struct rkvdec_decoded_buffer *buf)
--
2.34.3
Hi Ezequiel,
On Thu, Jul 7, 2022 at 3:27 AM Ezequiel Garcia
<[email protected]> wrote:
>
> Use the newly introduced vb2_find_buffer API to get a vb2_buffer
> given a buffer timestamp.
>
> Signed-off-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/staging/media/rkvdec/rkvdec-h264.c | 41 ++++++++--------------
> drivers/staging/media/rkvdec/rkvdec-vp9.c | 10 +++---
> 2 files changed, 19 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> index 2992fb87cf72..4af5a831bde0 100644
> --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> @@ -109,7 +109,7 @@ struct rkvdec_h264_run {
> const struct v4l2_ctrl_h264_sps *sps;
> const struct v4l2_ctrl_h264_pps *pps;
> const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
> - int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
> + struct vb2_buffer *ref_buf[V4L2_H264_NUM_DPB_ENTRIES];
How do we guarantee that those pointers remain valid through the
lifetime of this structure?
Best regards,
Tomasz
> };
>
> struct rkvdec_h264_ctx {
> @@ -742,17 +742,16 @@ static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
> struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
> struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> - int buf_idx = -1;
> + struct vb2_buffer *buf = NULL;
>
> if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) {
> - buf_idx = vb2_find_timestamp(cap_q,
> - dpb[i].reference_ts, 0);
> - if (buf_idx < 0)
> + buf = vb2_find_buffer(cap_q, dpb[i].reference_ts);
> + if (!buf)
> pr_debug("No buffer for reference_ts %llu",
> dpb[i].reference_ts);
> }
>
> - run->ref_buf_idx[i] = buf_idx;
> + run->ref_buf[i] = buf;
> }
> }
>
> @@ -805,7 +804,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
> if (WARN_ON(ref->index >= ARRAY_SIZE(dec_params->dpb)))
> continue;
>
> - dpb_valid = run->ref_buf_idx[ref->index] >= 0;
> + dpb_valid = run->ref_buf[ref->index] != NULL;
> bottom = ref->fields == V4L2_H264_BOTTOM_FIELD_REF;
>
> set_ps_field(hw_rps, DPB_INFO(i, j),
> @@ -881,24 +880,6 @@ static const u32 poc_reg_tbl_bottom_field[16] = {
> RKVDEC_REG_H264_POC_REFER2(1)
> };
>
> -static struct vb2_buffer *
> -get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
> - unsigned int dpb_idx)
> -{
> - struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> - struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> - int buf_idx = run->ref_buf_idx[dpb_idx];
> -
> - /*
> - * If a DPB entry is unused or invalid, address of current destination
> - * buffer is returned.
> - */
> - if (buf_idx < 0)
> - return &run->base.bufs.dst->vb2_buf;
> -
> - return vb2_get_buffer(cap_q, buf_idx);
> -}
> -
> static void config_registers(struct rkvdec_ctx *ctx,
> struct rkvdec_h264_run *run)
> {
> @@ -971,8 +952,14 @@ static void config_registers(struct rkvdec_ctx *ctx,
>
> /* config ref pic address & poc */
> for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
> - struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
> -
> + struct vb2_buffer *vb_buf = run->ref_buf[i];
> +
> + /*
> + * If a DPB entry is unused or invalid, address of current destination
> + * buffer is returned.
> + */
> + if (!vb_buf)
> + vb_buf = &dst_buf->vb2_buf;
> refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0);
>
> if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
> diff --git a/drivers/staging/media/rkvdec/rkvdec-vp9.c b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> index c2f42e76be10..d8c1c0db15c7 100644
> --- a/drivers/staging/media/rkvdec/rkvdec-vp9.c
> +++ b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> @@ -383,17 +383,17 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
> {
> struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> - int buf_idx;
> + struct vb2_buffer *buf;
>
> /*
> * If a ref is unused or invalid, address of current destination
> * buffer is returned.
> */
> - buf_idx = vb2_find_timestamp(cap_q, timestamp, 0);
> - if (buf_idx < 0)
> - return vb2_to_rkvdec_decoded_buf(&dst->vb2_buf);
> + buf = vb2_find_buffer(cap_q, timestamp);
> + if (!buf)
> + buf = &dst->vb2_buf;
>
> - return vb2_to_rkvdec_decoded_buf(vb2_get_buffer(cap_q, buf_idx));
> + return vb2_to_rkvdec_decoded_buf(buf);
> }
>
> static dma_addr_t get_mv_base_addr(struct rkvdec_decoded_buffer *buf)
> --
> 2.34.3
>
Hi Tomasz,
On Fri, Jul 08, 2022 at 01:40:53PM +0900, Tomasz Figa wrote:
> Hi Ezequiel,
>
> On Thu, Jul 7, 2022 at 3:27 AM Ezequiel Garcia
> <[email protected]> wrote:
> >
> > Use the newly introduced vb2_find_buffer API to get a vb2_buffer
> > given a buffer timestamp.
> >
> > Signed-off-by: Ezequiel Garcia <[email protected]>
> > ---
> > drivers/staging/media/rkvdec/rkvdec-h264.c | 41 ++++++++--------------
> > drivers/staging/media/rkvdec/rkvdec-vp9.c | 10 +++---
> > 2 files changed, 19 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > index 2992fb87cf72..4af5a831bde0 100644
> > --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> > +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > @@ -109,7 +109,7 @@ struct rkvdec_h264_run {
> > const struct v4l2_ctrl_h264_sps *sps;
> > const struct v4l2_ctrl_h264_pps *pps;
> > const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
> > - int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
> > + struct vb2_buffer *ref_buf[V4L2_H264_NUM_DPB_ENTRIES];
>
> How do we guarantee that those pointers remain valid through the
> lifetime of this structure?
>
The rkvdec_h264_run is populated in .device_run, and used to program
the hardware for each decode job.
So these videobuf2 buffer won't outlive a given decode job. The vb2
queue can't be released (so buffers can't be released) while
a job is runnning (i.e. the driver is in a "streaming" state).
We should be good, right?
Thanks for the review,
Ezequiel
> Best regards,
> Tomasz
>
> > };
> >
> > struct rkvdec_h264_ctx {
> > @@ -742,17 +742,16 @@ static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
> > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
> > struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > - int buf_idx = -1;
> > + struct vb2_buffer *buf = NULL;
> >
> > if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) {
> > - buf_idx = vb2_find_timestamp(cap_q,
> > - dpb[i].reference_ts, 0);
> > - if (buf_idx < 0)
> > + buf = vb2_find_buffer(cap_q, dpb[i].reference_ts);
> > + if (!buf)
> > pr_debug("No buffer for reference_ts %llu",
> > dpb[i].reference_ts);
> > }
> >
> > - run->ref_buf_idx[i] = buf_idx;
> > + run->ref_buf[i] = buf;
> > }
> > }
> >
> > @@ -805,7 +804,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
> > if (WARN_ON(ref->index >= ARRAY_SIZE(dec_params->dpb)))
> > continue;
> >
> > - dpb_valid = run->ref_buf_idx[ref->index] >= 0;
> > + dpb_valid = run->ref_buf[ref->index] != NULL;
> > bottom = ref->fields == V4L2_H264_BOTTOM_FIELD_REF;
> >
> > set_ps_field(hw_rps, DPB_INFO(i, j),
> > @@ -881,24 +880,6 @@ static const u32 poc_reg_tbl_bottom_field[16] = {
> > RKVDEC_REG_H264_POC_REFER2(1)
> > };
> >
> > -static struct vb2_buffer *
> > -get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
> > - unsigned int dpb_idx)
> > -{
> > - struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > - struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > - int buf_idx = run->ref_buf_idx[dpb_idx];
> > -
> > - /*
> > - * If a DPB entry is unused or invalid, address of current destination
> > - * buffer is returned.
> > - */
> > - if (buf_idx < 0)
> > - return &run->base.bufs.dst->vb2_buf;
> > -
> > - return vb2_get_buffer(cap_q, buf_idx);
> > -}
> > -
> > static void config_registers(struct rkvdec_ctx *ctx,
> > struct rkvdec_h264_run *run)
> > {
> > @@ -971,8 +952,14 @@ static void config_registers(struct rkvdec_ctx *ctx,
> >
> > /* config ref pic address & poc */
> > for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
> > - struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
> > -
> > + struct vb2_buffer *vb_buf = run->ref_buf[i];
> > +
> > + /*
> > + * If a DPB entry is unused or invalid, address of current destination
> > + * buffer is returned.
> > + */
> > + if (!vb_buf)
> > + vb_buf = &dst_buf->vb2_buf;
> > refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0);
> >
> > if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
> > diff --git a/drivers/staging/media/rkvdec/rkvdec-vp9.c b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > index c2f42e76be10..d8c1c0db15c7 100644
> > --- a/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > +++ b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > @@ -383,17 +383,17 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
> > {
> > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > - int buf_idx;
> > + struct vb2_buffer *buf;
> >
> > /*
> > * If a ref is unused or invalid, address of current destination
> > * buffer is returned.
> > */
> > - buf_idx = vb2_find_timestamp(cap_q, timestamp, 0);
> > - if (buf_idx < 0)
> > - return vb2_to_rkvdec_decoded_buf(&dst->vb2_buf);
> > + buf = vb2_find_buffer(cap_q, timestamp);
> > + if (!buf)
> > + buf = &dst->vb2_buf;
> >
> > - return vb2_to_rkvdec_decoded_buf(vb2_get_buffer(cap_q, buf_idx));
> > + return vb2_to_rkvdec_decoded_buf(buf);
> > }
> >
> > static dma_addr_t get_mv_base_addr(struct rkvdec_decoded_buffer *buf)
> > --
> > 2.34.3
> >
On Fri, Jul 8, 2022 at 8:21 PM Ezequiel Garcia
<[email protected]> wrote:
>
> Hi Tomasz,
>
> On Fri, Jul 08, 2022 at 01:40:53PM +0900, Tomasz Figa wrote:
> > Hi Ezequiel,
> >
> > On Thu, Jul 7, 2022 at 3:27 AM Ezequiel Garcia
> > <[email protected]> wrote:
> > >
> > > Use the newly introduced vb2_find_buffer API to get a vb2_buffer
> > > given a buffer timestamp.
> > >
> > > Signed-off-by: Ezequiel Garcia <[email protected]>
> > > ---
> > > drivers/staging/media/rkvdec/rkvdec-h264.c | 41 ++++++++--------------
> > > drivers/staging/media/rkvdec/rkvdec-vp9.c | 10 +++---
> > > 2 files changed, 19 insertions(+), 32 deletions(-)
> > >
> > > diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > index 2992fb87cf72..4af5a831bde0 100644
> > > --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > @@ -109,7 +109,7 @@ struct rkvdec_h264_run {
> > > const struct v4l2_ctrl_h264_sps *sps;
> > > const struct v4l2_ctrl_h264_pps *pps;
> > > const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
> > > - int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
> > > + struct vb2_buffer *ref_buf[V4L2_H264_NUM_DPB_ENTRIES];
> >
> > How do we guarantee that those pointers remain valid through the
> > lifetime of this structure?
> >
>
> The rkvdec_h264_run is populated in .device_run, and used to program
> the hardware for each decode job.
>
> So these videobuf2 buffer won't outlive a given decode job. The vb2
> queue can't be released (so buffers can't be released) while
> a job is runnning (i.e. the driver is in a "streaming" state).
>
> We should be good, right?
Makes sense, thanks!
I think the only other comment was about the new helper being
initially inline and then turned back into a regular function, so if
we don't get any other comments in a few more days, feel free to
ignore that one.
Best regards,
Tomasz
>
> Thanks for the review,
> Ezequiel
>
> > Best regards,
> > Tomasz
> >
> > > };
> > >
> > > struct rkvdec_h264_ctx {
> > > @@ -742,17 +742,16 @@ static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
> > > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
> > > struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > > - int buf_idx = -1;
> > > + struct vb2_buffer *buf = NULL;
> > >
> > > if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) {
> > > - buf_idx = vb2_find_timestamp(cap_q,
> > > - dpb[i].reference_ts, 0);
> > > - if (buf_idx < 0)
> > > + buf = vb2_find_buffer(cap_q, dpb[i].reference_ts);
> > > + if (!buf)
> > > pr_debug("No buffer for reference_ts %llu",
> > > dpb[i].reference_ts);
> > > }
> > >
> > > - run->ref_buf_idx[i] = buf_idx;
> > > + run->ref_buf[i] = buf;
> > > }
> > > }
> > >
> > > @@ -805,7 +804,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
> > > if (WARN_ON(ref->index >= ARRAY_SIZE(dec_params->dpb)))
> > > continue;
> > >
> > > - dpb_valid = run->ref_buf_idx[ref->index] >= 0;
> > > + dpb_valid = run->ref_buf[ref->index] != NULL;
> > > bottom = ref->fields == V4L2_H264_BOTTOM_FIELD_REF;
> > >
> > > set_ps_field(hw_rps, DPB_INFO(i, j),
> > > @@ -881,24 +880,6 @@ static const u32 poc_reg_tbl_bottom_field[16] = {
> > > RKVDEC_REG_H264_POC_REFER2(1)
> > > };
> > >
> > > -static struct vb2_buffer *
> > > -get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
> > > - unsigned int dpb_idx)
> > > -{
> > > - struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > - struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > > - int buf_idx = run->ref_buf_idx[dpb_idx];
> > > -
> > > - /*
> > > - * If a DPB entry is unused or invalid, address of current destination
> > > - * buffer is returned.
> > > - */
> > > - if (buf_idx < 0)
> > > - return &run->base.bufs.dst->vb2_buf;
> > > -
> > > - return vb2_get_buffer(cap_q, buf_idx);
> > > -}
> > > -
> > > static void config_registers(struct rkvdec_ctx *ctx,
> > > struct rkvdec_h264_run *run)
> > > {
> > > @@ -971,8 +952,14 @@ static void config_registers(struct rkvdec_ctx *ctx,
> > >
> > > /* config ref pic address & poc */
> > > for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
> > > - struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
> > > -
> > > + struct vb2_buffer *vb_buf = run->ref_buf[i];
> > > +
> > > + /*
> > > + * If a DPB entry is unused or invalid, address of current destination
> > > + * buffer is returned.
> > > + */
> > > + if (!vb_buf)
> > > + vb_buf = &dst_buf->vb2_buf;
> > > refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0);
> > >
> > > if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
> > > diff --git a/drivers/staging/media/rkvdec/rkvdec-vp9.c b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > > index c2f42e76be10..d8c1c0db15c7 100644
> > > --- a/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > > +++ b/drivers/staging/media/rkvdec/rkvdec-vp9.c
> > > @@ -383,17 +383,17 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
> > > {
> > > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
> > > - int buf_idx;
> > > + struct vb2_buffer *buf;
> > >
> > > /*
> > > * If a ref is unused or invalid, address of current destination
> > > * buffer is returned.
> > > */
> > > - buf_idx = vb2_find_timestamp(cap_q, timestamp, 0);
> > > - if (buf_idx < 0)
> > > - return vb2_to_rkvdec_decoded_buf(&dst->vb2_buf);
> > > + buf = vb2_find_buffer(cap_q, timestamp);
> > > + if (!buf)
> > > + buf = &dst->vb2_buf;
> > >
> > > - return vb2_to_rkvdec_decoded_buf(vb2_get_buffer(cap_q, buf_idx));
> > > + return vb2_to_rkvdec_decoded_buf(buf);
> > > }
> > >
> > > static dma_addr_t get_mv_base_addr(struct rkvdec_decoded_buffer *buf)
> > > --
> > > 2.34.3
> > >