2022-07-07 07:20:48

by Lukasz Luba

Subject: [PATCH v2 4/4] cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1

The SCMI v3.1 adds support for power values in micro-Watts. They are not
always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
must be converted conditionally before sending to Energy Model. Add the
logic which handles the needed checks and conversions.

Acked-by: Sudeep Holla <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
---
drivers/cpufreq/scmi-cpufreq.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index bfd35583d653..513a071845c2 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -100,7 +100,7 @@ static int __maybe_unused
scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
unsigned long *KHz)
{
- bool power_scale_mw = perf_ops->power_scale_mw_get(ph);
+ enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph);
unsigned long Hz;
int ret, domain;

@@ -114,8 +114,8 @@ scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
if (ret)
return ret;

- /* Provide bigger resolution power to the Energy Model */
- if (power_scale_mw)
+ /* Convert the power to uW if it is mW (ignore bogoW) */
+ if (power_scale == SCMI_POWER_MILLIWATTS)
*power *= MICROWATT_PER_MILLIWATT;

/* The EM framework specifies the frequency in KHz. */
@@ -255,8 +255,9 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
static void scmi_cpufreq_register_em(struct cpufreq_policy *policy)
{
struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
- bool power_scale_mw = perf_ops->power_scale_mw_get(ph);
+ enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph);
struct scmi_data *priv = policy->driver_data;
+ bool em_power_scale = false;

/*
* This callback will be called for each policy, but we don't need to
@@ -268,9 +269,13 @@ static void scmi_cpufreq_register_em(struct cpufreq_policy *policy)
if (!priv->nr_opp)
return;

+ if (power_scale == SCMI_POWER_MILLIWATTS
+ || power_scale == SCMI_POWER_MICROWATTS)
+ em_power_scale = true;
+
em_dev_register_perf_domain(get_cpu_device(policy->cpu), priv->nr_opp,
&em_cb, priv->opp_shared_cpus,
- power_scale_mw);
+ em_power_scale);
}

static struct cpufreq_driver scmi_cpufreq_driver = {
--
2.17.1

2022-07-07 11:36:58

by Viresh Kumar

Subject: Re: [PATCH v2 4/4] cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1

On 07-07-22, 08:15, Lukasz Luba wrote:
> The SCMI v3.1 adds support for power values in micro-Watts. They are not
> always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
> must be converted conditionally before sending to Energy Model. Add the
> logic which handles the needed checks and conversions.
>
> Acked-by: Sudeep Holla <[email protected]>
> Signed-off-by: Lukasz Luba <[email protected]>
> ---
> drivers/cpufreq/scmi-cpufreq.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)

Acked-by: Viresh Kumar <[email protected]>

--
viresh