Novatek NT35596s is a generic DSI IC that drives command and video mode
panels. Add the driver for it. Currently add support for the LCD panel
from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
Signed-off-by: MollySophia <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-jdi-fhd-nt35596s.c | 464 ++++++++++++++++++
3 files changed, 474 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d5176f75248f..a54389c107bc 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -231,6 +231,15 @@ config DRM_PANEL_JDI_R63452
Say Y here if you want to enable support for the JDI R63452
DSI command mode panel as found in Xiaomi Mi 5 Devices.
+config DRM_PANEL_JDI_NT35596S
+ tristate "JDI NT35596S Full HD DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the JDI NT35596S
+ DSI video mode panel as found in Xiaomi Mi Mix2s Devices.
+
config DRM_PANEL_KHADAS_TS050
tristate "Khadas TS050 panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index ef89dada021d..40db5e6dcbf5 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_TD4328) += panel-innolux-td4328.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
+obj-$(CONFIG_DRM_PANEL_JDI_NT35596S) += panel-jdi-fhd-nt35596s.o
obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
diff --git a/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c b/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
new file mode 100644
index 000000000000..0793bcd872e2
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Molly Sophia <[email protected]>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/swab.h>
+#include <linux/backlight.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct nt35596s_panel_cmd {
+ const char data[2];
+};
+
+static const char *const nt35596s_regulator_names[] = {
+ "vddio",
+ "vddpos",
+ "vddneg",
+};
+
+static const unsigned long nt35596s_regulator_enable_loads[] = { 62000, 100000,
+ 100000 };
+
+struct nt35596s_panel_desc {
+ const struct drm_display_mode *display_mode;
+ const char *panel_name;
+
+ unsigned int width_mm;
+ unsigned int height_mm;
+
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+ unsigned int lanes;
+
+ unsigned int num_on_cmds;
+ const struct nt35596s_panel_cmd *on_cmds;
+};
+
+struct nt35596s_panel {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ const struct nt35596s_panel_desc *desc;
+
+ struct regulator_bulk_data
+ supplies[ARRAY_SIZE(nt35596s_regulator_names)];
+
+ struct gpio_desc *reset_gpio;
+ bool prepared;
+};
+
+static inline struct nt35596s_panel *to_nt35596s_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct nt35596s_panel, panel);
+}
+
+static int nt35596s_send_cmds(struct drm_panel *panel,
+ const struct nt35596s_panel_cmd *cmds, int num)
+{
+ struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < num; i++) {
+ const struct nt35596s_panel_cmd *cmd = &cmds[i];
+
+ err = mipi_dsi_dcs_write(pinfo->dsi, cmd->data[0],
+ cmd->data + 1, 1);
+
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int nt35596s_panel_power_off(struct drm_panel *panel)
+{
+ struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
+ int ret = 0;
+
+ gpiod_set_value(pinfo->reset_gpio, 1);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(pinfo->supplies),
+ pinfo->supplies);
+ if (ret)
+ dev_err(panel->dev, "regulator_bulk_disable failed %d\n", ret);
+
+ return ret;
+}
+
+static int nt35596s_panel_unprepare(struct drm_panel *panel)
+{
+ struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
+ int ret;
+
+ if (!pinfo->prepared)
+ return 0;
+
+ ret = mipi_dsi_dcs_set_display_off(pinfo->dsi);
+ if (ret < 0)
+ dev_err(panel->dev, "set_display_off cmd failed ret = %d\n",
+ ret);
+
+ /* 120ms delay required here as per DCS spec */
+ msleep(120);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->dsi);
+ if (ret < 0)
+ dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
+
+ /* 0x46 = 70ms delay */
+ msleep(70);
+
+ ret = nt35596s_panel_power_off(panel);
+ if (ret < 0)
+ dev_err(panel->dev, "power_off failed ret = %d\n", ret);
+
+ pinfo->prepared = false;
+
+ return ret;
+}
+
+static int nt35596s_panel_power_on(struct nt35596s_panel *pinfo)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(pinfo->supplies),
+ pinfo->supplies);
+ if (ret < 0)
+ return ret;
+
+ gpiod_set_value(pinfo->reset_gpio, 1);
+ msleep(200);
+ gpiod_set_value(pinfo->reset_gpio, 0);
+ msleep(200);
+
+ return 0;
+}
+
+static int nt35596s_panel_prepare(struct drm_panel *panel)
+{
+ struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
+ int err;
+
+ if (pinfo->prepared)
+ return 0;
+
+ err = nt35596s_panel_power_on(pinfo);
+ if (err < 0)
+ goto poweroff;
+
+ err = nt35596s_send_cmds(panel, pinfo->desc->on_cmds,
+ pinfo->desc->num_on_cmds);
+
+ if (err < 0) {
+ dev_err(panel->dev, "failed to send DCS Init Code: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_exit_sleep_mode(pinfo->dsi);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+ goto poweroff;
+ }
+
+ /* 0x46 = 70 ms delay */
+ msleep(70);
+
+ err = mipi_dsi_dcs_set_display_on(pinfo->dsi);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to Set Display ON: %d\n", err);
+ goto poweroff;
+ }
+
+ msleep(120);
+
+ pinfo->prepared = true;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value(pinfo->reset_gpio, 0);
+ return err;
+}
+
+static int nt35596s_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
+ const struct drm_display_mode *m = pinfo->desc->display_mode;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, m);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ return -ENOMEM;
+ }
+
+ connector->display_info.width_mm = pinfo->desc->width_mm;
+ connector->display_info.height_mm = pinfo->desc->height_mm;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs panel_funcs = {
+ .prepare = nt35596s_panel_prepare,
+ .unprepare = nt35596s_panel_unprepare,
+ .get_modes = nt35596s_panel_get_modes,
+};
+
+static const struct nt35596s_panel_cmd jdi_fhd_video_on_cmds[] = {
+ { .data = { 0xff, 0x24 } }, { .data = { 0x9d, 0x34 } },
+ { .data = { 0xfb, 0x01 } }, { .data = { 0xc4, 0x25 } },
+ { .data = { 0xd1, 0x08 } }, { .data = { 0xd2, 0x84 } },
+ { .data = { 0xff, 0x26 } }, { .data = { 0xfb, 0x01 } },
+ { .data = { 0x03, 0x1c } }, { .data = { 0x3b, 0x08 } },
+ { .data = { 0x6b, 0x08 } }, { .data = { 0x97, 0x08 } },
+ { .data = { 0xc5, 0x08 } }, { .data = { 0xfb, 0x01 } },
+ { .data = { 0xff, 0x23 } }, { .data = { 0xfb, 0x01 } },
+ { .data = { 0x01, 0x84 } }, { .data = { 0x05, 0x2d } },
+ { .data = { 0x06, 0x00 } }, { .data = { 0x33, 0x07 } },
+ { .data = { 0x21, 0xee } }, { .data = { 0x22, 0xed } },
+ { .data = { 0x23, 0xea } }, { .data = { 0x24, 0xe8 } },
+ { .data = { 0x25, 0xe5 } }, { .data = { 0x26, 0xe2 } },
+ { .data = { 0x27, 0xde } }, { .data = { 0x28, 0xbb } },
+ { .data = { 0x29, 0x87 } }, { .data = { 0x2a, 0x77 } },
+ { .data = { 0x32, 0x0c } }, { .data = { 0x13, 0x3f } },
+ { .data = { 0x14, 0x34 } }, { .data = { 0x15, 0x2a } },
+ { .data = { 0x16, 0x25 } }, { .data = { 0x17, 0x9d } },
+ { .data = { 0x18, 0x9a } }, { .data = { 0x19, 0x97 } },
+ { .data = { 0x1a, 0x94 } }, { .data = { 0x1b, 0x91 } },
+ { .data = { 0x1c, 0x8e } }, { .data = { 0x1d, 0x8b } },
+ { .data = { 0x1e, 0x89 } }, { .data = { 0x1f, 0x86 } },
+ { .data = { 0x20, 0x83 } }, { .data = { 0xff, 0x22 } },
+ { .data = { 0x00, 0x0a } }, { .data = { 0x01, 0x43 } },
+ { .data = { 0x02, 0x5b } }, { .data = { 0x03, 0x6a } },
+ { .data = { 0x04, 0x7a } }, { .data = { 0x05, 0x82 } },
+ { .data = { 0x06, 0x85 } }, { .data = { 0x07, 0x80 } },
+ { .data = { 0x08, 0x7c } }, { .data = { 0x09, 0x7c } },
+ { .data = { 0x0a, 0x74 } }, { .data = { 0x0b, 0x71 } },
+ { .data = { 0x0c, 0x6e } }, { .data = { 0x0d, 0x68 } },
+ { .data = { 0x0e, 0x65 } }, { .data = { 0x0f, 0x5c } },
+ { .data = { 0x10, 0x32 } }, { .data = { 0x11, 0x18 } },
+ { .data = { 0x12, 0x00 } }, { .data = { 0x13, 0x00 } },
+ { .data = { 0x1a, 0x00 } }, { .data = { 0x1b, 0x00 } },
+ { .data = { 0x1c, 0x00 } }, { .data = { 0x1d, 0x00 } },
+ { .data = { 0x1e, 0x00 } }, { .data = { 0x1f, 0x00 } },
+ { .data = { 0x20, 0x00 } }, { .data = { 0x21, 0x00 } },
+ { .data = { 0x22, 0x00 } }, { .data = { 0x23, 0x00 } },
+ { .data = { 0x24, 0x00 } }, { .data = { 0x25, 0x00 } },
+ { .data = { 0x26, 0x00 } }, { .data = { 0x27, 0x00 } },
+ { .data = { 0x28, 0x00 } }, { .data = { 0x29, 0x00 } },
+ { .data = { 0x2a, 0x00 } }, { .data = { 0x2b, 0x00 } },
+ { .data = { 0x2f, 0x00 } }, { .data = { 0x30, 0x00 } },
+ { .data = { 0x31, 0x00 } }, { .data = { 0x32, 0x0c } },
+ { .data = { 0x33, 0x0c } }, { .data = { 0x34, 0x0c } },
+ { .data = { 0x35, 0x0b } }, { .data = { 0x36, 0x09 } },
+ { .data = { 0x37, 0x09 } }, { .data = { 0x38, 0x08 } },
+ { .data = { 0x39, 0x05 } }, { .data = { 0x3a, 0x03 } },
+ { .data = { 0x3b, 0x00 } }, { .data = { 0x3f, 0x00 } },
+ { .data = { 0x40, 0x00 } }, { .data = { 0x41, 0x00 } },
+ { .data = { 0x42, 0x00 } }, { .data = { 0x43, 0x00 } },
+ { .data = { 0x44, 0x00 } }, { .data = { 0x45, 0x00 } },
+ { .data = { 0x46, 0x00 } }, { .data = { 0x47, 0x00 } },
+ { .data = { 0x48, 0x00 } }, { .data = { 0x49, 0x03 } },
+ { .data = { 0x4a, 0x06 } }, { .data = { 0x4b, 0x07 } },
+ { .data = { 0x4c, 0x07 } }, { .data = { 0x53, 0x01 } },
+ { .data = { 0x54, 0x01 } }, { .data = { 0x55, 0x89 } },
+ { .data = { 0x56, 0x00 } }, { .data = { 0x58, 0x00 } },
+ { .data = { 0x68, 0x00 } }, { .data = { 0x84, 0xff } },
+ { .data = { 0x85, 0xff } }, { .data = { 0x86, 0x03 } },
+ { .data = { 0x87, 0x00 } }, { .data = { 0x88, 0x00 } },
+ { .data = { 0xa2, 0x20 } }, { .data = { 0xa9, 0x01 } },
+ { .data = { 0xaa, 0x12 } }, { .data = { 0xab, 0x13 } },
+ { .data = { 0xac, 0x0a } }, { .data = { 0xad, 0x74 } },
+ { .data = { 0xaf, 0x33 } }, { .data = { 0xb0, 0x03 } },
+ { .data = { 0xb1, 0x14 } }, { .data = { 0xb2, 0x42 } },
+ { .data = { 0xb3, 0x40 } }, { .data = { 0xb4, 0xa5 } },
+ { .data = { 0xb6, 0x44 } }, { .data = { 0xb7, 0x04 } },
+ { .data = { 0xb8, 0x14 } }, { .data = { 0xb9, 0x42 } },
+ { .data = { 0xba, 0x40 } }, { .data = { 0xbb, 0xa5 } },
+ { .data = { 0xbd, 0x44 } }, { .data = { 0xbe, 0x04 } },
+ { .data = { 0xbf, 0x00 } }, { .data = { 0xc0, 0x75 } },
+ { .data = { 0xc1, 0x6a } }, { .data = { 0xc2, 0xa5 } },
+ { .data = { 0xc4, 0x22 } }, { .data = { 0xc5, 0x02 } },
+ { .data = { 0xc6, 0x00 } }, { .data = { 0xc7, 0x95 } },
+ { .data = { 0xc8, 0x8a } }, { .data = { 0xc9, 0xa5 } },
+ { .data = { 0xcb, 0x22 } }, { .data = { 0xcc, 0x02 } },
+ { .data = { 0xcd, 0x00 } }, { .data = { 0xce, 0xb5 } },
+ { .data = { 0xcf, 0xaa } }, { .data = { 0xd0, 0xa5 } },
+ { .data = { 0xd2, 0x22 } }, { .data = { 0xd3, 0x02 } },
+ { .data = { 0xfb, 0x01 } }, { .data = { 0xff, 0x10 } },
+ { .data = { 0x26, 0x02 } }, { .data = { 0x35, 0x00 } },
+ { .data = { 0x51, 0xff } }, { .data = { 0x53, 0x24 } },
+ { .data = { 0x55, 0x00 } }, { .data = { 0xb0, 0x00 } },
+};
+
+static const struct drm_display_mode jdi_fhd_video_panel_mode = {
+ .clock = (1080 + 16 + 28 + 40) * (2160 + 7 + 4 + 24) * 60 / 1000,
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 16,
+ .hsync_end = 1080 + 16 + 28,
+ .htotal = 1080 + 16 + 28 + 40,
+
+ .vdisplay = 2160,
+ .vsync_start = 2160 + 7,
+ .vsync_end = 2160 + 7 + 4,
+ .vtotal = 2160 + 7 + 4 + 24,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct nt35596s_panel_desc jdi_fhd_video_panel_desc = {
+ .display_mode = &jdi_fhd_video_panel_mode,
+
+ .width_mm = 68,
+ .height_mm = 136,
+
+ .mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+ MIPI_DSI_MODE_VIDEO_BURST,
+ .format = MIPI_DSI_FMT_RGB888,
+ .lanes = 4,
+ .on_cmds = jdi_fhd_video_on_cmds,
+ .num_on_cmds = ARRAY_SIZE(jdi_fhd_video_on_cmds),
+};
+
+static int nt35596s_panel_add(struct nt35596s_panel *pinfo)
+{
+ struct device *dev = &pinfo->dsi->dev;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++)
+ pinfo->supplies[i].supply = nt35596s_regulator_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies),
+ pinfo->supplies);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to get regulators\n");
+
+ for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
+ ret = regulator_set_load(pinfo->supplies[i].consumer,
+ nt35596s_regulator_enable_loads[i]);
+ if (ret)
+ return dev_err_probe(
+ dev, ret,
+ "failed to set regulator enable loads\n");
+ }
+
+ pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(pinfo->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio),
+ "failed to get reset gpio from DT\n");
+
+ drm_panel_init(&pinfo->panel, dev, &panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&pinfo->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+ drm_panel_add(&pinfo->panel);
+
+ return 0;
+}
+
+static int nt35596s_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct nt35596s_panel *pinfo;
+ const struct nt35596s_panel_desc *desc;
+ int err;
+
+ pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ desc = of_device_get_match_data(&dsi->dev);
+ dsi->mode_flags = desc->mode_flags;
+ dsi->format = desc->format;
+ dsi->lanes = desc->lanes;
+ pinfo->desc = desc;
+ pinfo->dsi = dsi;
+
+ mipi_dsi_set_drvdata(dsi, pinfo);
+
+ err = nt35596s_panel_add(pinfo);
+ if (err < 0)
+ return err;
+
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ drm_panel_remove(&pinfo->panel);
+ return err;
+ }
+
+ return 0;
+}
+
+static int nt35596s_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct nt35596s_panel *pinfo = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = drm_panel_unprepare(&pinfo->panel);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
+
+ err = drm_panel_disable(&pinfo->panel);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+ drm_panel_remove(&pinfo->panel);
+
+ return 0;
+}
+
+static void nt35596s_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct nt35596s_panel *pinfo = mipi_dsi_get_drvdata(dsi);
+
+ drm_panel_disable(&pinfo->panel);
+ drm_panel_unprepare(&pinfo->panel);
+}
+
+static const struct of_device_id nt35596s_panel_of_match[] = {
+ { .compatible = "jdi,fhd-nt35596s", .data = &jdi_fhd_video_panel_desc },
+ {}
+};
+MODULE_DEVICE_TABLE(of, nt35596s_panel_of_match);
+
+static struct mipi_dsi_driver nt35596s_panel_driver = {
+ .driver = {
+ .name = "panel-jdi-fhd-nt35596s",
+ .of_match_table = nt35596s_panel_of_match,
+ },
+ .probe = nt35596s_panel_probe,
+ .remove = nt35596s_panel_remove,
+ .shutdown = nt35596s_panel_shutdown,
+};
+module_mipi_dsi_driver(nt35596s_panel_driver);
+
+MODULE_AUTHOR("Molly Sophia <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for JDI FHD nt35596s DSI panel, video mode");
+MODULE_LICENSE("GPL");
--
2.37.0
Add documentation for "novatek,nt35596s" panel.
Signed-off-by: MollySophia <[email protected]>
---
.../display/panel/novatek,nt35596s.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
new file mode 100644
index 000000000000..937b194a6f18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35596s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35596S based DSI display Panels
+
+maintainers:
+ - Molly Sophia <[email protected]>
+
+description: |
+ The nt35596s IC from Novatek is a generic DSI Panel IC used to drive dsi
+ panels.
+ Right now, support is added only for a JDI FHD+ LCD display panel with a
+ resolution of 1080x2160. It is a video mode DSI panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - jdi,fhd-nt35596s
+ - const: novatek,nt35596s
+ description: This indicates the panel manufacturer of the panel that is
+ in turn using the NT35596S panel driver. This compatible string
+ determines how the NT35596S panel driver is configured for the indicated
+ panel. The novatek,nt35596s compatible shall always be provided as a fallback.
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA, gpio
+ can be configured using mux, pinctrl, pinctrl-names (active high)
+
+ vddi0-supply:
+ description: phandle of the regulator that provides the supply voltage
+ Power IC supply
+
+ vddpos-supply:
+ description: phandle of the positive boost supply regulator
+
+ vddneg-supply:
+ description: phandle of the negative boost supply regulator
+
+ reg: true
+ port: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddi0-supply
+ - vddpos-supply
+ - vddneg-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "jdi,fhd-nt35596s", "novatek,nt35596s";
+ reg = <0>;
+ vddi0-supply = <&vreg_l14a_1p88>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ jdi_nt35596s_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
--
2.37.0
Hi Molly,
On Fri, Jul 08, 2022 at 10:18:24AM +0800, MollySophia wrote:
> Add documentation for "novatek,nt35596s" panel.
As a general note, we cannot apply a driver without the binding.
So this patch should be the first in the series.
Not a big deal, but it makes it easier on the committer later.
A few comments below.
Sam
>
> Signed-off-by: MollySophia <[email protected]>
> ---
> .../display/panel/novatek,nt35596s.yaml | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
> new file mode 100644
> index 000000000000..937b194a6f18
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35596s.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/novatek,nt35596s.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Novatek NT35596S based DSI display Panels
> +
> +maintainers:
> + - Molly Sophia <[email protected]>
> +
> +description: |
> + The nt35596s IC from Novatek is a generic DSI Panel IC used to drive dsi
> + panels.
> + Right now, support is added only for a JDI FHD+ LCD display panel with a
> + resolution of 1080x2160. It is a video mode DSI panel.
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - jdi,fhd-nt35596s
> + - const: novatek,nt35596s
> + description: This indicates the panel manufacturer of the panel that is
> + in turn using the NT35596S panel driver. This compatible string
> + determines how the NT35596S panel driver is configured for the indicated
> + panel. The novatek,nt35596s compatible shall always be provided as a fallback.
> +
> + reset-gpios:
> + maxItems: 1
> + description: phandle of gpio for reset line - This should be 8mA, gpio
> + can be configured using mux, pinctrl, pinctrl-names (active high)
reset-gpios is part of panel-common and there is no need to describe it
here. The description, which looks like a copy from another binding,
does not really tell anything that is specific for this HW.
So replace it with a
reset-gpios: true
later in the binding would be better.
> +
> + vddi0-supply:
> + description: phandle of the regulator that provides the supply voltage
> + Power IC supply
Please drop the "phandle of the" part. This is implicit and does not
provide any extra info on the actual HW.
This comments applies for all *-supply.
> +
> + vddpos-supply:
> + description: phandle of the positive boost supply regulator
> +
> + vddneg-supply:
> + description: phandle of the negative boost supply regulator
> +
> + reg: true
> + port: true
> + backlight: true
> +
> +required:
> + - compatible
> + - reg
> + - vddi0-supply
> + - vddpos-supply
> + - vddneg-supply
> + - reset-gpios
> + - port
> +
> +unevaluatedProperties: false
Use:
additionalProperties: false
This will catch if the DT file contains any properties that is not
mentioned here.
The use of unevaluatedProperties in the file you copied from looks
wrong.
> +
> +examples:
> + - |+
No need for the + sign here.
> + #include <dt-bindings/gpio/gpio.h>
> +
> + dsi0 {
dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "jdi,fhd-nt35596s", "novatek,nt35596s";
> + reg = <0>;
> + vddi0-supply = <&vreg_l14a_1p88>;
> + vddpos-supply = <&lab>;
> + vddneg-supply = <&ibb>;
> +
> + backlight = <&pmi8998_wled>;
> + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + jdi_nt35596s_in_0: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.37.0
Hi Molly,
Thanks for submitting this driver.
A few comments follows - the most relevant is the error handling when
unprepare/disable.
Please take a look and re-submit.
Sam
On Fri, Jul 08, 2022 at 10:18:23AM +0800, MollySophia wrote:
> Novatek NT35596s is a generic DSI IC that drives command and video mode
> panels. Add the driver for it. Currently add support for the LCD panel
> from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
>
> Signed-off-by: MollySophia <[email protected]>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-jdi-fhd-nt35596s.c | 464 ++++++++++++++++++
> 3 files changed, 474 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d5176f75248f..a54389c107bc 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -231,6 +231,15 @@ config DRM_PANEL_JDI_R63452
> Say Y here if you want to enable support for the JDI R63452
> DSI command mode panel as found in Xiaomi Mi 5 Devices.
>
> +config DRM_PANEL_JDI_NT35596S
> + tristate "JDI NT35596S Full HD DSI panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the JDI NT35596S
> + DSI video mode panel as found in Xiaomi Mi Mix2s Devices.
> +
Alphabetic order is preferred, so it comes before DRM_PANEL_JDI_R63452
> config DRM_PANEL_KHADAS_TS050
> tristate "Khadas TS050 panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index ef89dada021d..40db5e6dcbf5 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> obj-$(CONFIG_DRM_PANEL_INNOLUX_TD4328) += panel-innolux-td4328.o
> obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
> obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
> +obj-$(CONFIG_DRM_PANEL_JDI_NT35596S) += panel-jdi-fhd-nt35596s.o
Alphabetic order is preferred, so again before CONFIG_DRM_PANEL_JDI_R63452
> obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> diff --git a/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c b/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
> new file mode 100644
> index 000000000000..0793bcd872e2
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-jdi-fhd-nt35596s.c
> @@ -0,0 +1,464 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Molly Sophia <[email protected]>
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/swab.h>
> +#include <linux/backlight.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct nt35596s_panel_cmd {
> + const char data[2];
> +};
> +
> +static const char *const nt35596s_regulator_names[] = {
> + "vddio",
> + "vddpos",
> + "vddneg",
> +};
> +
> +static const unsigned long nt35596s_regulator_enable_loads[] = { 62000, 100000,
> + 100000 };
> +
> +struct nt35596s_panel_desc {
> + const struct drm_display_mode *display_mode;
> + const char *panel_name;
panel_name is not used - drop it.
> +
> + unsigned int width_mm;
> + unsigned int height_mm;
> +
> + unsigned long mode_flags;
> + enum mipi_dsi_pixel_format format;
> + unsigned int lanes;
> +
> + unsigned int num_on_cmds;
> + const struct nt35596s_panel_cmd *on_cmds;
> +};
> +
> +struct nt35596s_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + const struct nt35596s_panel_desc *desc;
> +
> + struct regulator_bulk_data
> + supplies[ARRAY_SIZE(nt35596s_regulator_names)];
> +
> + struct gpio_desc *reset_gpio;
> + bool prepared;
> +};
> +
> +static inline struct nt35596s_panel *to_nt35596s_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct nt35596s_panel, panel);
> +}
> +
> +static int nt35596s_send_cmds(struct drm_panel *panel,
> + const struct nt35596s_panel_cmd *cmds, int num)
> +{
> + struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
> + unsigned int i;
> + int err;
> +
> + for (i = 0; i < num; i++) {
> + const struct nt35596s_panel_cmd *cmd = &cmds[i];
> +
> + err = mipi_dsi_dcs_write(pinfo->dsi, cmd->data[0],
> + cmd->data + 1, 1);
> +
> + if (err < 0)
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int nt35596s_panel_power_off(struct drm_panel *panel)
> +{
> + struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
> + int ret = 0;
> +
> + gpiod_set_value(pinfo->reset_gpio, 1);
> +
> + ret = regulator_bulk_disable(ARRAY_SIZE(pinfo->supplies),
> + pinfo->supplies);
> + if (ret)
> + dev_err(panel->dev, "regulator_bulk_disable failed %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int nt35596s_panel_unprepare(struct drm_panel *panel)
> +{
> + struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
> + int ret;
> +
> + if (!pinfo->prepared)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(pinfo->dsi);
> + if (ret < 0)
> + dev_err(panel->dev, "set_display_off cmd failed ret = %d\n",
> + ret);
> +
> + /* 120ms delay required here as per DCS spec */
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->dsi);
> + if (ret < 0)
> + dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
> +
> + /* 0x46 = 70ms delay */
> + msleep(70);
> +
> + ret = nt35596s_panel_power_off(panel);
> + if (ret < 0)
> + dev_err(panel->dev, "power_off failed ret = %d\n", ret);
Two error messages are written here. One in nt35596s_panel_power_off()
and one here. It would be better to keep all dev_err in the caller and
drop it from nt35596s_panel_power_off().
> +
> + pinfo->prepared = false;
> +
> + return ret;
> +}
> +
> +static int nt35596s_panel_power_on(struct nt35596s_panel *pinfo)
> +{
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(pinfo->supplies),
> + pinfo->supplies);
> + if (ret < 0)
> + return ret;
No error message here - so the off and on variant are not the same.
If the code fails to power on then consider to apply reset here - so
there is no need to think about reset in the prepare function.
> +
> + gpiod_set_value(pinfo->reset_gpio, 1);
> + msleep(200);
> + gpiod_set_value(pinfo->reset_gpio, 0);
> + msleep(200);
> +
> + return 0;
> +}
> +
> +static int nt35596s_panel_prepare(struct drm_panel *panel)
> +{
> + struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
> + int err;
> +
> + if (pinfo->prepared)
> + return 0;
> +
> + err = nt35596s_panel_power_on(pinfo);
> + if (err < 0)
> + goto poweroff;
Here it would have been nice to tell that power on failed.
If nt35596s_panel_power_on() do the reset handling the function can exit
here.
> +
> + err = nt35596s_send_cmds(panel, pinfo->desc->on_cmds,
> + pinfo->desc->num_on_cmds);
> +
> + if (err < 0) {
> + dev_err(panel->dev, "failed to send DCS Init Code: %d\n", err);
> + goto poweroff;
> + }
> +
> + err = mipi_dsi_dcs_exit_sleep_mode(pinfo->dsi);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
> + goto poweroff;
> + }
> +
> + /* 0x46 = 70 ms delay */
> + msleep(70);
> +
> + err = mipi_dsi_dcs_set_display_on(pinfo->dsi);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to Set Display ON: %d\n", err);
> + goto poweroff;
> + }
> +
> + msleep(120);
> +
> + pinfo->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + gpiod_set_value(pinfo->reset_gpio, 0);
Here it would be better to do what the label says and call the power_off
function. Right now the display may be left powered on but reset.
> + return err;
> +}
> +
> +static int nt35596s_panel_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct nt35596s_panel *pinfo = to_nt35596s_panel(panel);
> + const struct drm_display_mode *m = pinfo->desc->display_mode;
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, m);
> + if (!mode) {
> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> + return -ENOMEM;
> + }
> +
> + connector->display_info.width_mm = pinfo->desc->width_mm;
> + connector->display_info.height_mm = pinfo->desc->height_mm;
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs panel_funcs = {
> + .prepare = nt35596s_panel_prepare,
> + .unprepare = nt35596s_panel_unprepare,
> + .get_modes = nt35596s_panel_get_modes,
> +};
> +
> +static const struct nt35596s_panel_cmd jdi_fhd_video_on_cmds[] = {
> + { .data = { 0xff, 0x24 } }, { .data = { 0x9d, 0x34 } },
> + { .data = { 0xfb, 0x01 } }, { .data = { 0xc4, 0x25 } },
> + { .data = { 0xd1, 0x08 } }, { .data = { 0xd2, 0x84 } },
> + { .data = { 0xff, 0x26 } }, { .data = { 0xfb, 0x01 } },
> + { .data = { 0x03, 0x1c } }, { .data = { 0x3b, 0x08 } },
> + { .data = { 0x6b, 0x08 } }, { .data = { 0x97, 0x08 } },
> + { .data = { 0xc5, 0x08 } }, { .data = { 0xfb, 0x01 } },
> + { .data = { 0xff, 0x23 } }, { .data = { 0xfb, 0x01 } },
> + { .data = { 0x01, 0x84 } }, { .data = { 0x05, 0x2d } },
> + { .data = { 0x06, 0x00 } }, { .data = { 0x33, 0x07 } },
> + { .data = { 0x21, 0xee } }, { .data = { 0x22, 0xed } },
> + { .data = { 0x23, 0xea } }, { .data = { 0x24, 0xe8 } },
> + { .data = { 0x25, 0xe5 } }, { .data = { 0x26, 0xe2 } },
> + { .data = { 0x27, 0xde } }, { .data = { 0x28, 0xbb } },
> + { .data = { 0x29, 0x87 } }, { .data = { 0x2a, 0x77 } },
> + { .data = { 0x32, 0x0c } }, { .data = { 0x13, 0x3f } },
> + { .data = { 0x14, 0x34 } }, { .data = { 0x15, 0x2a } },
> + { .data = { 0x16, 0x25 } }, { .data = { 0x17, 0x9d } },
> + { .data = { 0x18, 0x9a } }, { .data = { 0x19, 0x97 } },
> + { .data = { 0x1a, 0x94 } }, { .data = { 0x1b, 0x91 } },
> + { .data = { 0x1c, 0x8e } }, { .data = { 0x1d, 0x8b } },
> + { .data = { 0x1e, 0x89 } }, { .data = { 0x1f, 0x86 } },
> + { .data = { 0x20, 0x83 } }, { .data = { 0xff, 0x22 } },
> + { .data = { 0x00, 0x0a } }, { .data = { 0x01, 0x43 } },
> + { .data = { 0x02, 0x5b } }, { .data = { 0x03, 0x6a } },
> + { .data = { 0x04, 0x7a } }, { .data = { 0x05, 0x82 } },
> + { .data = { 0x06, 0x85 } }, { .data = { 0x07, 0x80 } },
> + { .data = { 0x08, 0x7c } }, { .data = { 0x09, 0x7c } },
> + { .data = { 0x0a, 0x74 } }, { .data = { 0x0b, 0x71 } },
> + { .data = { 0x0c, 0x6e } }, { .data = { 0x0d, 0x68 } },
> + { .data = { 0x0e, 0x65 } }, { .data = { 0x0f, 0x5c } },
> + { .data = { 0x10, 0x32 } }, { .data = { 0x11, 0x18 } },
> + { .data = { 0x12, 0x00 } }, { .data = { 0x13, 0x00 } },
> + { .data = { 0x1a, 0x00 } }, { .data = { 0x1b, 0x00 } },
> + { .data = { 0x1c, 0x00 } }, { .data = { 0x1d, 0x00 } },
> + { .data = { 0x1e, 0x00 } }, { .data = { 0x1f, 0x00 } },
> + { .data = { 0x20, 0x00 } }, { .data = { 0x21, 0x00 } },
> + { .data = { 0x22, 0x00 } }, { .data = { 0x23, 0x00 } },
> + { .data = { 0x24, 0x00 } }, { .data = { 0x25, 0x00 } },
> + { .data = { 0x26, 0x00 } }, { .data = { 0x27, 0x00 } },
> + { .data = { 0x28, 0x00 } }, { .data = { 0x29, 0x00 } },
> + { .data = { 0x2a, 0x00 } }, { .data = { 0x2b, 0x00 } },
> + { .data = { 0x2f, 0x00 } }, { .data = { 0x30, 0x00 } },
> + { .data = { 0x31, 0x00 } }, { .data = { 0x32, 0x0c } },
> + { .data = { 0x33, 0x0c } }, { .data = { 0x34, 0x0c } },
> + { .data = { 0x35, 0x0b } }, { .data = { 0x36, 0x09 } },
> + { .data = { 0x37, 0x09 } }, { .data = { 0x38, 0x08 } },
> + { .data = { 0x39, 0x05 } }, { .data = { 0x3a, 0x03 } },
> + { .data = { 0x3b, 0x00 } }, { .data = { 0x3f, 0x00 } },
> + { .data = { 0x40, 0x00 } }, { .data = { 0x41, 0x00 } },
> + { .data = { 0x42, 0x00 } }, { .data = { 0x43, 0x00 } },
> + { .data = { 0x44, 0x00 } }, { .data = { 0x45, 0x00 } },
> + { .data = { 0x46, 0x00 } }, { .data = { 0x47, 0x00 } },
> + { .data = { 0x48, 0x00 } }, { .data = { 0x49, 0x03 } },
> + { .data = { 0x4a, 0x06 } }, { .data = { 0x4b, 0x07 } },
> + { .data = { 0x4c, 0x07 } }, { .data = { 0x53, 0x01 } },
> + { .data = { 0x54, 0x01 } }, { .data = { 0x55, 0x89 } },
> + { .data = { 0x56, 0x00 } }, { .data = { 0x58, 0x00 } },
> + { .data = { 0x68, 0x00 } }, { .data = { 0x84, 0xff } },
> + { .data = { 0x85, 0xff } }, { .data = { 0x86, 0x03 } },
> + { .data = { 0x87, 0x00 } }, { .data = { 0x88, 0x00 } },
> + { .data = { 0xa2, 0x20 } }, { .data = { 0xa9, 0x01 } },
> + { .data = { 0xaa, 0x12 } }, { .data = { 0xab, 0x13 } },
> + { .data = { 0xac, 0x0a } }, { .data = { 0xad, 0x74 } },
> + { .data = { 0xaf, 0x33 } }, { .data = { 0xb0, 0x03 } },
> + { .data = { 0xb1, 0x14 } }, { .data = { 0xb2, 0x42 } },
> + { .data = { 0xb3, 0x40 } }, { .data = { 0xb4, 0xa5 } },
> + { .data = { 0xb6, 0x44 } }, { .data = { 0xb7, 0x04 } },
> + { .data = { 0xb8, 0x14 } }, { .data = { 0xb9, 0x42 } },
> + { .data = { 0xba, 0x40 } }, { .data = { 0xbb, 0xa5 } },
> + { .data = { 0xbd, 0x44 } }, { .data = { 0xbe, 0x04 } },
> + { .data = { 0xbf, 0x00 } }, { .data = { 0xc0, 0x75 } },
> + { .data = { 0xc1, 0x6a } }, { .data = { 0xc2, 0xa5 } },
> + { .data = { 0xc4, 0x22 } }, { .data = { 0xc5, 0x02 } },
> + { .data = { 0xc6, 0x00 } }, { .data = { 0xc7, 0x95 } },
> + { .data = { 0xc8, 0x8a } }, { .data = { 0xc9, 0xa5 } },
> + { .data = { 0xcb, 0x22 } }, { .data = { 0xcc, 0x02 } },
> + { .data = { 0xcd, 0x00 } }, { .data = { 0xce, 0xb5 } },
> + { .data = { 0xcf, 0xaa } }, { .data = { 0xd0, 0xa5 } },
> + { .data = { 0xd2, 0x22 } }, { .data = { 0xd3, 0x02 } },
> + { .data = { 0xfb, 0x01 } }, { .data = { 0xff, 0x10 } },
> + { .data = { 0x26, 0x02 } }, { .data = { 0x35, 0x00 } },
> + { .data = { 0x51, 0xff } }, { .data = { 0x53, 0x24 } },
> + { .data = { 0x55, 0x00 } }, { .data = { 0xb0, 0x00 } },
> +};
> +
> +static const struct drm_display_mode jdi_fhd_video_panel_mode = {
> + .clock = (1080 + 16 + 28 + 40) * (2160 + 7 + 4 + 24) * 60 / 1000,
> +
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 16,
> + .hsync_end = 1080 + 16 + 28,
> + .htotal = 1080 + 16 + 28 + 40,
> +
> + .vdisplay = 2160,
> + .vsync_start = 2160 + 7,
> + .vsync_end = 2160 + 7 + 4,
> + .vtotal = 2160 + 7 + 4 + 24,
> +
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
> +static const struct nt35596s_panel_desc jdi_fhd_video_panel_desc = {
> + .display_mode = &jdi_fhd_video_panel_mode,
> +
> + .width_mm = 68,
> + .height_mm = 136,
> +
> + .mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_CLOCK_NON_CONTINUOUS |
> + MIPI_DSI_MODE_VIDEO_BURST,
> + .format = MIPI_DSI_FMT_RGB888,
> + .lanes = 4,
> + .on_cmds = jdi_fhd_video_on_cmds,
> + .num_on_cmds = ARRAY_SIZE(jdi_fhd_video_on_cmds),
> +};
> +
> +static int nt35596s_panel_add(struct nt35596s_panel *pinfo)
> +{
> + struct device *dev = &pinfo->dsi->dev;
> + int i, ret;
> +
> + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++)
> + pinfo->supplies[i].supply = nt35596s_regulator_names[i];
> +
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies),
> + pinfo->supplies);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "failed to get regulators\n");
> +
> + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
> + ret = regulator_set_load(pinfo->supplies[i].consumer,
> + nt35596s_regulator_enable_loads[i]);
> + if (ret)
> + return dev_err_probe(
> + dev, ret,
> + "failed to set regulator enable loads\n");
> + }
> +
> + pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pinfo->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio),
> + "failed to get reset gpio from DT\n");
> +
> + drm_panel_init(&pinfo->panel, dev, &panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&pinfo->panel);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> + drm_panel_add(&pinfo->panel);
> +
> + return 0;
> +}
> +
> +static int nt35596s_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct nt35596s_panel *pinfo;
> + const struct nt35596s_panel_desc *desc;
> + int err;
> +
> + pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL);
> + if (!pinfo)
> + return -ENOMEM;
> +
> + desc = of_device_get_match_data(&dsi->dev);
> + dsi->mode_flags = desc->mode_flags;
> + dsi->format = desc->format;
> + dsi->lanes = desc->lanes;
> + pinfo->desc = desc;
> + pinfo->dsi = dsi;
> +
> + mipi_dsi_set_drvdata(dsi, pinfo);
> +
> + err = nt35596s_panel_add(pinfo);
> + if (err < 0)
> + return err;
> +
> + err = mipi_dsi_attach(dsi);
> + if (err < 0) {
> + drm_panel_remove(&pinfo->panel);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int nt35596s_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct nt35596s_panel *pinfo = mipi_dsi_get_drvdata(dsi);
> + int err;
> +
> + err = drm_panel_unprepare(&pinfo->panel);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
> +
> + err = drm_panel_disable(&pinfo->panel);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
> +
> + err = mipi_dsi_detach(dsi);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
> +
> + drm_panel_remove(&pinfo->panel);
> +
> + return 0;
> +}
> +
> +static void nt35596s_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct nt35596s_panel *pinfo = mipi_dsi_get_drvdata(dsi);
> +
> + drm_panel_disable(&pinfo->panel);
> + drm_panel_unprepare(&pinfo->panel);
> +}
> +
> +static const struct of_device_id nt35596s_panel_of_match[] = {
> + { .compatible = "jdi,fhd-nt35596s", .data = &jdi_fhd_video_panel_desc },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, nt35596s_panel_of_match);
> +
> +static struct mipi_dsi_driver nt35596s_panel_driver = {
> + .driver = {
> + .name = "panel-jdi-fhd-nt35596s",
> + .of_match_table = nt35596s_panel_of_match,
> + },
> + .probe = nt35596s_panel_probe,
> + .remove = nt35596s_panel_remove,
> + .shutdown = nt35596s_panel_shutdown,
> +};
> +module_mipi_dsi_driver(nt35596s_panel_driver);
> +
> +MODULE_AUTHOR("Molly Sophia <[email protected]>");
> +MODULE_DESCRIPTION("DRM driver for JDI FHD nt35596s DSI panel, video mode");
> +MODULE_LICENSE("GPL");
> --
> 2.37.0