From: Max Krummenacher <[email protected]>
A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.
Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <[email protected]>
---
arch/arm/boot/dts/imx6ull-colibri.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 623bb7585ad1..577a424b0e1d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -165,7 +165,7 @@
atmel_mxt_ts: touchscreen@4a {
compatible = "atmel,maxtouch";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_atmel_conn>;
+ pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
reg = <0x4a>;
interrupt-parent = <&gpio5>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */
@@ -330,7 +330,6 @@
pinctrl_atmel_conn: atmelconngrp {
fsl,pins = <
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
>;
};
@@ -683,6 +682,12 @@
};
&iomuxc_snvs {
+ pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
+ >;
+ };
+
pinctrl_snvs_gpio1: snvsgpio1grp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */
--
2.20.1
On Tue, Jul 05, 2022 at 10:58:24AM +0200, Max Krummenacher wrote:
> From: Max Krummenacher <[email protected]>
>
> A pin controlled by the iomuxc-snvs pin controller must be
> specified under the dtb's iomuxc-snvs node.
>
> Move the one and only pin of that category from the iomuxc node
> and set the pinctrl-0 using it accordingly.
>
> Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
> Signed-off-by: Max Krummenacher <[email protected]>
Applied, thanks!