From: Christian Marangi <[email protected]>
An RCG may act as a mux that switch between 2 parents.
This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds
the CPU cluster clock just switches between XO and the PLL that feeds it.
Add the required ops to add support for this special configuration and use
the generic mux function to determine the rate.
This way we dont have to keep a essentially dummy frequency table to use
RCG2 as a mux.
Signed-off-by: Christian Marangi <[email protected]>
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/clk-rcg.h | 1 +
drivers/clk/qcom/clk-rcg2.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 012e745794fd..01581f4d2c39 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -167,6 +167,7 @@ struct clk_rcg2_gfx3d {
extern const struct clk_ops clk_rcg2_ops;
extern const struct clk_ops clk_rcg2_floor_ops;
+extern const struct clk_ops clk_rcg2_mux_closest_ops;
extern const struct clk_ops clk_edp_pixel_ops;
extern const struct clk_ops clk_byte_ops;
extern const struct clk_ops clk_byte2_ops;
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 28019edd2a50..609c10f8d0d9 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -509,6 +509,13 @@ const struct clk_ops clk_rcg2_floor_ops = {
};
EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops);
+const struct clk_ops clk_rcg2_mux_closest_ops = {
+ .determine_rate = __clk_mux_determine_rate_closest,
+ .get_parent = clk_rcg2_get_parent,
+ .set_parent = clk_rcg2_set_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_mux_closest_ops);
+
struct frac_entry {
int num;
int den;
--
2.36.1
Convert the driver to use OF match data for providing the Alpha PLL config
per compatible.
This is required for IPQ8074 support since it uses a different Alpha PLL
config.
While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make
it clear that it is for IPQ6018 only.
Signed-off-by: Robert Marko <[email protected]>
---
drivers/clk/qcom/apss-ipq-pll.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index bef7899ad0d6..ba77749b16c4 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -2,6 +2,7 @@
// Copyright (c) 2018, The Linux Foundation. All rights reserved.
#include <linux/clk-provider.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -36,7 +37,7 @@ static struct clk_alpha_pll ipq_pll = {
},
};
-static const struct alpha_pll_config ipq_pll_config = {
+static const struct alpha_pll_config ipq6018_pll_config = {
.l = 0x37,
.config_ctl_val = 0x04141200,
.config_ctl_hi_val = 0x0,
@@ -54,6 +55,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
static int apss_ipq_pll_probe(struct platform_device *pdev)
{
+ const struct alpha_pll_config *ipq_pll_config;
struct device *dev = &pdev->dev;
struct regmap *regmap;
void __iomem *base;
@@ -67,7 +69,11 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
+ ipq_pll_config = of_device_get_match_data(&pdev->dev);
+ if (!ipq_pll_config)
+ return -ENODEV;
+
+ clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config);
ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
if (ret)
@@ -78,7 +84,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
}
static const struct of_device_id apss_ipq_pll_match_table[] = {
- { .compatible = "qcom,ipq6018-a53pll" },
+ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
{ }
};
MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
--
2.36.1
While working on IPQ8074 APSS driver it was discovered that IPQ6018 and
IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is
currently broken.
More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux
clock.
However after debugging why it was always stuck at 800Mhz, it was figured
out that its not regmap_mux compatible at all.
It is a simple mux but it uses RCG2 register layout and control bits, so
utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not
having to provide a dummy frequency table.
While we are here, use ARRAY_SIZE for number of parents.
Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards.
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/apss-ipq6018.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
index d78ff2f310bf..be952d417ded 100644
--- a/drivers/clk/qcom/apss-ipq6018.c
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -16,7 +16,7 @@
#include "clk-regmap.h"
#include "clk-branch.h"
#include "clk-alpha-pll.h"
-#include "clk-regmap-mux.h"
+#include "clk-rcg.h"
enum {
P_XO,
@@ -33,16 +33,15 @@ static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
{ P_APSS_PLL_EARLY, 5 },
};
-static struct clk_regmap_mux apcs_alias0_clk_src = {
- .reg = 0x0050,
- .width = 3,
- .shift = 7,
+static struct clk_rcg2 apcs_alias0_clk_src = {
+ .cmd_rcgr = 0x0050,
+ .hid_width = 5,
.parent_map = parents_apcs_alias0_clk_src_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "apcs_alias0_clk_src",
.parent_data = parents_apcs_alias0_clk_src,
- .num_parents = 2,
- .ops = &clk_regmap_mux_closest_ops,
+ .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src),
+ .ops = &clk_rcg2_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
--
2.36.1
While fixing up the driver I noticed that my IPQ8074 board was hanging
after CPUFreq switched the frequency during boot, WDT would eventually
reset it.
So mark apcs_alias0_core_clk as critical since its the clock feeding the
CPU cluster and must never be disabled.
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/apss-ipq6018.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
index be952d417ded..f2f502e2d5a4 100644
--- a/drivers/clk/qcom/apss-ipq6018.c
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -56,7 +56,7 @@ static struct clk_branch apcs_alias0_core_clk = {
.parent_hws = (const struct clk_hw *[]){
&apcs_alias0_clk_src.clkr.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
.ops = &clk_branch2_ops,
},
},
--
2.36.1
Add IPQ8074 compatible to A53 PLL bindings.
Signed-off-by: Robert Marko <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/clock/qcom,a53pll.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index fbd758470b88..76830816982e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -17,6 +17,7 @@ properties:
compatible:
enum:
- qcom,ipq6018-a53pll
+ - qcom,ipq8074-a53pll
- qcom,msm8916-a53pll
- qcom,msm8939-a53pll
--
2.36.1