Hi Mike, Stephen,
Here are a couple fixes for the clk core. They are unrelated but overlap
in diff context, so I'm sending them together.
Patch 1 makes the clk core honor CLK_OPS_PARENT_ENABLE for clk gate ops.
Without this, dumping clk_summary on the MT8192 would cause the system
to hang.
Patch 2 reorders the runtime PM call in clk_core_unprepare() to match
the order described in its original commit, and the opposite of that
in clk_core_prepare().
Changes since v1
- Use clk_core_{enable,disable}_lock() instead of non-locking variant.
Reported by Nícolas
- Added coverage for clk_core_is_prepared()
- Correct sequencing in clk_core_is_enabled() so that runtime PM is
handled before parent clock is enabled, matching other functions.
Regards
ChenYu
Chen-Yu Tsai (2):
clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops
clk: core: Fix runtime PM sequence in clk_core_unprepare()
drivers/clk/clk.c | 31 +++++++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
--
2.37.0.170.g444d1eabd0-goog
In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"),
the commit message mentioned that pm_runtime_put_sync() would be done
at the end of clk_core_unprepare(). This mirrors the operations in
clk_core_prepare() in the opposite order.
However, the actual code that was added wasn't in the order the commit
message described. Move clk_pm_runtime_put() to the end of
clk_core_unprepare() so that it is in the correct order.
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
drivers/clk/clk.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9b365cd6d14b..2e29a72c68e1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -859,13 +859,12 @@ static void clk_core_unprepare(struct clk_core *core)
if (core->ops->unprepare)
core->ops->unprepare(core->hw);
- clk_pm_runtime_put(core);
-
trace_clk_unprepare_complete(core);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_lock(core->parent);
clk_core_unprepare(core->parent);
+ clk_pm_runtime_put(core);
}
static void clk_core_unprepare_lock(struct clk_core *core)
--
2.37.0.170.g444d1eabd0-goog
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.
This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.
Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
drivers/clk/clk.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 7fc191c15507..9b365cd6d14b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -196,6 +196,9 @@ static bool clk_core_rate_is_protected(struct clk_core *core)
return core->protect_count;
}
+static int clk_core_prepare_enable(struct clk_core *core);
+static void clk_core_disable_unprepare(struct clk_core *core);
+
static bool clk_core_is_prepared(struct clk_core *core)
{
bool ret = false;
@@ -208,7 +211,11 @@ static bool clk_core_is_prepared(struct clk_core *core)
return core->prepare_count;
if (!clk_pm_runtime_get(core)) {
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_prepare_enable(core->parent);
ret = core->ops->is_prepared(core->hw);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_unprepare(core->parent);
clk_pm_runtime_put(core);
}
@@ -244,7 +251,13 @@ static bool clk_core_is_enabled(struct clk_core *core)
}
}
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_prepare_enable(core->parent);
+
ret = core->ops->is_enabled(core->hw);
+
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_unprepare(core->parent);
done:
if (core->rpm_enabled)
pm_runtime_put(core->dev);
@@ -812,6 +825,9 @@ int clk_rate_exclusive_get(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_rate_exclusive_get);
+static int clk_core_enable_lock(struct clk_core *core);
+static void clk_core_disable_lock(struct clk_core *core);
+
static void clk_core_unprepare(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
@@ -835,6 +851,9 @@ static void clk_core_unprepare(struct clk_core *core)
WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_enable_lock(core->parent);
+
trace_clk_unprepare(core);
if (core->ops->unprepare)
@@ -843,6 +862,9 @@ static void clk_core_unprepare(struct clk_core *core)
clk_pm_runtime_put(core);
trace_clk_unprepare_complete(core);
+
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_lock(core->parent);
clk_core_unprepare(core->parent);
}
@@ -891,6 +913,9 @@ static int clk_core_prepare(struct clk_core *core)
if (ret)
goto runtime_put;
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_enable_lock(core->parent);
+
trace_clk_prepare(core);
if (core->ops->prepare)
@@ -898,6 +923,9 @@ static int clk_core_prepare(struct clk_core *core)
trace_clk_prepare_complete(core);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_lock(core->parent);
+
if (ret)
goto unprepare;
}
--
2.37.0.170.g444d1eabd0-goog
On Wed, Jul 13, 2022 at 04:21:10PM +0800, Chen-Yu Tsai wrote:
> In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
> this flag was only added to rate change operations (rate setting and
> reparent) and disabling unused subtree. It was not added to the
> clock gate related operations. Any hardware driver that needs it for
> these operations will either see bogus results, or worse, hang.
>
> This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
> drivers set this, but dumping debugfs clk_summary would cause it
> to hang.
>
> Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
> Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
> Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: N?colas F. R. A. Prado <[email protected]>
Tested-by: N?colas F. R. A. Prado <[email protected]>
Tested that MT8192 no longer hangs when dumping clk_summary.
Thanks,
N?colas
On Wed, Jul 13, 2022 at 04:21:11PM +0800, Chen-Yu Tsai wrote:
> In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"),
> the commit message mentioned that pm_runtime_put_sync() would be done
> at the end of clk_core_unprepare(). This mirrors the operations in
> clk_core_prepare() in the opposite order.
>
> However, the actual code that was added wasn't in the order the commit
> message described. Move clk_pm_runtime_put() to the end of
> clk_core_unprepare() so that it is in the correct order.
>
> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
> Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: N?colas F. R. A. Prado <[email protected]>
Thanks,
N?colas