2022-07-13 22:58:25

by Kris Bahnsen

Subject: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

Add initial support of the i.MX6UL based TS-7553-V2 platform.

Signed-off-by: Kris Bahnsen <[email protected]>
---

V1->V2: Implement changes recommended by Rob Herring and dtbs_check

RFC only, not yet ready to merge, more testing needed and we're working on
SPI LCD support for this platform.

Specifically, I have a few questions on some paradigms and dtbs_check output:

imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ... \
'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], 'reg': [[12]]}}}} \
is not of type 'array'
I'm not sure what this error is referring to as I've copied the example in
invensense,mpu6050.yaml almost verbatim. Is this an issue with our patch
or a false positive from dtbs_check?


imx6ul-ts7553v2.dtb: spi@2010000: spidev@1: 'compatible' is a required property
Many of our devices have open-ended I2C and SPI ports that may or may not be
used in customer applications. With "spidev" compatible string no longer
supported, there is no easy way we know of to leave a placeholder or
indication that the interface is present, usable, and either needs specific
support enabled in kernel or userspace access via /dev/. We would love
feedback on how to handle this situation when submitting platforms upstream.


imx6ul-ts7553v2.dtb: wifi@0: compatible:0: 'microchip,wilc1000' was expected
imx6ul-ts7553v2.dtb: wifi@0: compatible: ['microchip,wilc3000'...] is too long
imx6ul-ts7553v2.dtb: wifi@0: 'chip_en-gpios' does not match any of the \
regexes: pinctrl-[0-9]+'
As noted in the comments in the dts, the WILC1000 in-kernel driver doesn't
support the BLE features of the WILC3000. We maintain an external module
tree that lets us build Microchip's official driver with WILC3000 support.
Would the extraneous compatible string and property be accepted upstream
in light of this?


Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6ul-ts7553v2.dts | 693 ++++++++++
arch/arm/configs/ts7970_defconfig | 1627 ++++++++++++++++++++++++
arch/arm/configs/tsimx6ul_defconfig | 967 ++++++++++++++
5 files changed, 3289 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-ts7553v2.dts
create mode 100644 arch/arm/configs/ts7970_defconfig
create mode 100644 arch/arm/configs/tsimx6ul_defconfig

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index ef524378d449..05a4e5b39835 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -559,6 +559,7 @@ properties:
- technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf
- technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit
- technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
+ - technologic,ts7553v2 # embeddedTS TS-7553-V2
- const: fsl,imx6ul

- description: i.MX6UL Armadeus Systems OPOS6UL SoM Board
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5112f493f494..72a26abafaa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -709,6 +709,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-phytec-segin-ff-rdk-emmc.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-prti6g.dtb \
+ imx6ul-ts7553v2.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-ts7553v2.dts b/arch/arm/boot/dts/imx6ul-ts7553v2.dts
new file mode 100644
index 000000000000..8ed201f58137
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ts7553v2.dts
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Technologic Systems, Inc. dba embeddedTS
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+ model = "embeddedTS i.MX6UL TS-7553-V2";
+ compatible = "technologic,ts7553v2", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+ compatible = "gpio-leds";
+
+ green-led {
+ label = "green-led";
+ gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ red-led {
+ label = "red-led";
+ gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ left {
+ label = "Left";
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ debounce-interval = <20>;
+ gpio-key,wakeup;
+ };
+
+ up {
+ label = "Up";
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ debounce-interval = <20>;
+ gpio-key,wakeup;
+ };
+ down {
+ label = "Down";
+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ debounce-interval = <20>;
+ gpio-key,wakeup;
+ };
+ right {
+ label = "Right";
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ debounce-interval = <20>;
+ gpio-key,wakeup;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x4000000>;
+ linux,cma-default;
+ };
+ };
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1-3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_enet_phy_3v3: regulator-phy {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3v3>;
+ regulator-name = "ENET-3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_flexcan_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan_3v3>;
+ regulator-name = "CAN-EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ };
+
+ i2c_gpio: i2c-gpio {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2cgpio>;
+ sda-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ mpu9250a: imu@68 {
+ compatible = "invensense,mpu9250";
+ reg = <0x68>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0xc>;
+ };
+ };
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "", "USB-5V-EN", "", "", "", "", "", "",
+ "MODEM-5V-EN", "XBEE-3V3-EN", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "RS232-XCEIVER-EN";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "XBEE-PIN-9", "XBEE-PIN-16", "", "", "", "",
+ "XBEE-PIN-12";
+
+ /* XXX: Do more testing with with this. PFM mode normally enabled under
+ * 700 mA which is well below what the 7553v2 runs at. in PFM mode lower
+ * freq to minimize switching losses but less able to respond to fast
+ * transients */
+ vreg-mode-hog {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "VREG-MODE";
+ };
+};
+
+&gpio3 {
+ gpio-line-names = "USB-HUB-RESET#", "", "", "", "", "", "",
+ "USB-MUX-CPU-OTG", "", "", "", "NO-CHRG-JMP#", "", "", "", "",
+ "", "SD-BOOT-JMP#", "PUSH-SW#", "U-BOOT-JMP#", "XBEE-RESET#",
+ "", "", "RES-STRAP-0", "RES-STRAP-1", "", "",
+ "RES-STRAP-2", "RES-STRAP-3";
+};
+
+&gpio5 {
+ gpio-line-names = "POWER-FAIL#", "", "EMMC-PWR-EN", "", "", "", "",
+ "XBEE-USB-EN#", "RELAY-EN";
+
+ vdd-soc-in-v-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "VDD-SOC-IN-V";
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ m41t00s: rtc@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&ecspi3 {
+ num-cs = <3>;
+ cs-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>, <&gpio2 15 GPIO_ACTIVE_LOW>, <&gpio5 6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+
+ st7565p: lcd@0 {
+ /* TODO: Add driver support for Sitronix ST7565p */
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ };
+
+ spidevdc: spidev@1 {
+ /*
+ * Open interface on pin-header. Add appropriate "compatible"
+ * and related properties here. The "reg" property should
+ * remain as-is.
+ */
+ reg = <1>;
+ };
+
+ fm25l16b: eeprom@2 {
+ compatible = "atmel,at25";
+ reg = <2>;
+ spi-max-frequency = <20000000>;
+ size = <0x800>;
+ address-width = <16>;
+ pagesize = <64>;
+ };
+};
+
+&ecspi4 {
+ num-cs = <1>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ status = "okay";
+
+ /*
+ * In testing, the in-kernel wilc1000 driver was non-functional on SPI.
+ * However, it is possible to build the official Microchip driver
+ * outside of their kernel tree as an external module and it works
+ * just fine and allows for true WILC3000 compatibility with BLE support.
+ * The below compatible string is structured to prefer the external
+ * module and fallback to in-kernel if that ever becomes functional.
+ * Additionally, using both chip_en and enable gpios are in order to
+ * support both the external module and in-kernel driver.
+ */
+ wilc: wifi@0 {
+ compatible = "microchip,wilc3000", "microchip,wilc1000";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ reset-gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ chip_en-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ phy-supply = <&reg_enet_phy_3v3>;
+ status = "okay";
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&reg_flexcan_3v3>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_flexcan_3v3>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ /*
+ * Need to use GPIO for TXEN even though CTS is available on this port.
+ * All instances of the UART2 RTS signal have other uses therefore leaving
+ * the UART module RTS_B input unconnected which generates spurious IRQs.
+ * If the imx.c driver is ever adjusted to allow configuration of RTSDEN
+ * then it may be possible to use real CTS here if RTS IRQs are disabled.
+ */
+ rts-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ cts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ keep-power-in-suspend;
+ disable-wp;
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <&reg_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ disable-wp;
+ broken-cd;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Reserved signals */
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b020
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1a020
+ MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x1a020
+ MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x1a020
+ MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x1a020
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x13020
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x1b020
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b020
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b020
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b020
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x1b020
+
+
+ /* Has hardware pull resistor */
+ MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x1a020 /* U_BOOT_JMP#_ */
+ MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x1a020 /* NO_CHRG_JMP# */
+ MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x1a020 /* SD_BOOT_JMP# */
+ MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x1a020 /* 6UL_TO_USB_DEV */
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x1a020 /* MODEM 5 v */
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1a020 /* XBee 3.3 v */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1a020 /* eMMC En. */
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0a0
+
+ /* Needs internal pull resistor */
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b020 /* RES_STRAP_0 */
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b020 /* RES_STRAP_1 */
+ MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x1b020 /* RES_STRAP_2 */
+ MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x1b020 /* RES_STRAP_3 */
+ MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x1b020 /* XBEE_RESET# */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b020 /* XBEE_USB_EN# */
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b020 /* XBEE_DIO_8 */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b020 /* XBEE_DIO_7 */
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b020 /* XBEE_DIO_6 */
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1a020 /* RELAY_EN */
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x1b020 /* USB 5v EN */
+ MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x1b020 /* USB_HUB_RESET# */
+ MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M 0x1b020 /* USB hub */
+ MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x1a020 /* PUSH_SW_CPU# */
+ MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x1b020 /* 232_TRANS_EN */
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b020 /* POWER_FAIL */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x1a020 /* Left */
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x1a020 /* Up */
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1a020 /* Down */
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1a020 /* Right */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x1b020 /* Red LED */
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x1b020 /* Grn LED */
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ /* Wired always high for device mode on TS-7553-V2 */
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x16059
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x1b020
+ MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan_3v3: flexcan3v3grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b020 /* CAN En. */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1
+ MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x1b0b1
+ MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet_3v3: enet3v3grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001a8b0
+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001a8b0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x4001a8b0
+ MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x4001a8b0
+ >;
+ };
+
+ pinctrl_i2cgpio: i2cgrpgpio {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x4001a8b0
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x4001a8b0
+ MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x13020 /* IMU IRQ */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ /* hysteresis, en 47k PU */
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x17059 /* EN_SD_POWER */
+ MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ // XXX: These are not defined with GPIO names
+ // See about porting LCD driver?
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x1b020 /* LCD_BKLT */
+ MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x1b020 /* LCD_RESET# */
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b020 /* LCD_CMD# */
+ MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x1b020 /* SPI_3_CLK */
+ MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x1b020 /* SPI_3_MOSI */
+ MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x1b820 /* SPI_3_MISO */
+ MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x1b020 /* LCD CS0# */
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b020 /* HD1 CS1# */
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b020 /* FRAM CS2# */
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b020
+ MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b020
+ MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b020
+ MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b020 /* WIFI CS# */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b020 /* WIFI IRQ# */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x1b020 /* WIFI RST# */
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x1b020 /* WIFI EN */
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0xb8b0
+ >;
+ };
+};
diff --git a/arch/arm/configs/ts7970_defconfig b/arch/arm/configs/ts7970_defconfig
new file mode 100644
index 000000000000..a96831752449
--- /dev/null
+++ b/arch/arm/configs/ts7970_defconfig
@@ -0,0 +1,1627 @@
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_BPF=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SLL=y
+CONFIG_SOC_IMX6SX=y
+CONFIG_ARM_ERRATA_814220=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_ARM_PSCI=y
+CONFIG_HZ_1000=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_CMDLINE_PARSER=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_COREDUMP is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_NET_IPVTI=m
+CONFIG_NET_FOU_IP_TUNNELS=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_INET_DIAG_DESTROY=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_NV=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_DCTCP=m
+CONFIG_TCP_CONG_CDG=m
+CONFIG_TCP_CONG_BBR=m
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_ILA=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_NETLINK_GLUE_CT=y
+CONFIG_NF_TABLES=m
+CONFIG_NFT_NUMGEN=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_MAC=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_FO=m
+CONFIG_IP_VS_OVF=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_LOG_ARP=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NFT_BRIDGE_META=m
+CONFIG_NF_LOG_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_IP_SCTP=m
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_TIPC=m
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_NET_DSA=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC2=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_PHONET=m
+CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
+CONFIG_NET_SCH_PIE=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_NET_ACT_CONNMARK=m
+CONFIG_NET_ACT_SKBMOD=m
+CONFIG_NET_ACT_IFE=m
+CONFIG_NET_ACT_TUNNEL_KEY=m
+CONFIG_DCB=y
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_DEBUG=y
+CONFIG_OPENVSWITCH=m
+CONFIG_VSOCKETS=m
+CONFIG_NETLINK_DIAG=m
+CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
+CONFIG_HSR=m
+CONFIG_NET_NCSI=y
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_BPF_JIT=y
+CONFIG_CAN=y
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_FLEXCAN=y
+CONFIG_CAN_8DEV_USB=m
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_GS_USB=m
+CONFIG_CAN_KVASER_USB=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=y
+CONFIG_BT_6LOWPAN=m
+CONFIG_BT_LEDS=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_AG6XX=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+CONFIG_CFG80211_CERTIFICATION_ONUS=y
+CONFIG_CFG80211_REG_CELLULAR_HINTS=y
+CONFIG_CFG80211_REG_RELAX_NO_IR=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_MESSAGE_TRACING=y
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
+CONFIG_CAIF=m
+CONFIG_CAIF_USB=m
+CONFIG_NFC=m
+CONFIG_NFC_DIGITAL=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_NCI_SPI=m
+CONFIG_NFC_NCI_UART=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=y
+CONFIG_NFC_PORT100=m
+CONFIG_NFC_PN533_USB=m
+CONFIG_NFC_MRVL_USB=m
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_IMX6=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_IMX_WEIM=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_NVME=m
+CONFIG_NVME_TARGET=m
+CONFIG_NVME_TARGET_LOOP=m
+CONFIG_C2PORT=m
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_TI_ST=m
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
+CONFIG_PATA_IMX=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_BCACHE=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_DM_LOG_WRITES=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
+CONFIG_VXLAN=m
+CONFIG_GENEVE=m
+CONFIG_GTP=m
+CONFIG_MACSEC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NLMON=m
+CONFIG_NET_VRF=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ATM_TCP=m
+CONFIG_NET_DSA_MV88E6060=m
+CONFIG_NET_DSA_MV88E6XXX=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_AGERE is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_ALX=m
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_IGB=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_R8169=m
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=m
+CONFIG_EPIC100=m
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+CONFIG_SMSC9420=m
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_TLAN=m
+CONFIG_FDDI=m
+CONFIG_DEFXX=m
+CONFIG_SKFP=m
+CONFIG_MICREL_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_LAN78XX=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
+CONFIG_USB_NET_CDC_MBIM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_CDC_PHONET=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_USB_NET_CH9200=m
+CONFIG_ATH5K=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_USB=m
+CONFIG_AR5523=m
+CONFIG_WIL6210=m
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SDIO=m
+CONFIG_WCN36XX=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_USB=y
+CONFIG_BRCMFMAC_PCIE=y
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWLWIFI=m
+CONFIG_IWLDVM=m
+CONFIG_IWLMVM=m
+CONFIG_IWLWIFI_BCAST_FILTERING=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_PRISM54=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+CONFIG_MWL8K=m
+CONFIG_MT7601U=m
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8XXXU=m
+CONFIG_RTL8XXXU_UNTESTED=y
+CONFIG_WL12XX=m
+CONFIG_WLCORE_SDIO=m
+# CONFIG_WILINK_PLATFORM_DATA is not set
+CONFIG_USB_ZD1201=m
+CONFIG_ZD1211RW=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_WAN=y
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+CONFIG_PC300TOO=m
+CONFIG_FARSYNC=m
+CONFIG_SLIC_DS26522=m
+CONFIG_DLCI=m
+CONFIG_LAPBETHER=m
+CONFIG_X25_ASY=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IEEE802154_AT86RF230=m
+CONFIG_IEEE802154_MRF24J40=m
+CONFIG_IEEE802154_CC2520=m
+CONFIG_IEEE802154_ATUSB=m
+CONFIG_IEEE802154_ADF7242=m
+CONFIG_ISDN=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=m
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=m
+CONFIG_JOYSTICK_IFORCE_232=m
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_AS5011=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_PEGASUS=m
+CONFIG_TABLET_SERIAL_WACOM4=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_TSC2004=y
+CONFIG_TOUCHSCREEN_TSC2005=y
+CONFIG_TOUCHSCREEN_TSC2007=y
+CONFIG_INPUT_MISC=y
+CONFIG_SERIO_SERPORT=m
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_MAX3100_TS=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
+CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_MUX_REG=y
+CONFIG_I2C_DEMUX_PINCTRL=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_QUADSPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_GPIO=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MXC=y
+CONFIG_GPIO_ADP5588=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_TS4900=y
+CONFIG_GPIO_PISOSR=m
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2413=m
+CONFIG_W1_SLAVE_DS2406=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+# CONFIG_HWMON is not set
+CONFIG_THERMAL_STATISTICS=y
+CONFIG_THERMAL_WRITABLE_TRIPS=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9062=y
+CONFIG_MFD_DA9063=y
+CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_RN5T618=y
+CONFIG_MFD_STMPE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_DA9062=y
+CONFIG_REGULATOR_DA9063=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_RN5T618=y
+CONFIG_RC_CORE=y
+CONFIG_RC_MAP=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_HIX5HD2=m
+CONFIG_IR_IMON=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_IGORPLUGUSB=m
+CONFIG_IR_IGUANA=m
+CONFIG_IR_TTUSBIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_ADV_DEBUG=y
+CONFIG_VIDEO_FIXED_MINOR_RANGES=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_DTCS033=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TOUPTEK=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_VIDEO_USBTV=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_STK1160_COMMON=m
+CONFIG_VIDEO_GO7007=m
+CONFIG_VIDEO_GO7007_USB=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_DVB_USB=m
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_V2=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_DVBSKY=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+CONFIG_DVB_AS102=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_USB_AIRSPY=m
+CONFIG_USB_HACKRF=m
+CONFIG_USB_MSI2500=m
+CONFIG_MEDIA_PCI_SUPPORT=y
+CONFIG_VIDEO_SOLO6X10=m
+CONFIG_VIDEO_TW5864=m
+CONFIG_VIDEO_TW68=m
+CONFIG_VIDEO_TW686X=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DT3155=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7134_GO7007=m
+CONFIG_VIDEO_SAA7164=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_PLUTO2=m
+CONFIG_DVB_PT1=m
+CONFIG_DVB_PT3=m
+CONFIG_DVB_NGENE=m
+CONFIG_DVB_DDBRIDGE=m
+CONFIG_DVB_NETUP_UNIDVB=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_SI4713=m
+CONFIG_PLATFORM_SI4713=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_USB_KEENE=m
+CONFIG_USB_RAREMONO=m
+CONFIG_USB_MA901=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=m
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_OV2680=m
+CONFIG_VIDEO_OV5640=m
+CONFIG_VIDEO_OV5645=m
+CONFIG_IMX_IPUV3_CORE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_LVDS=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
+CONFIG_DRM_TI_TFP410=y
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_DW_HDMI_CEC=y
+CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
+CONFIG_DRM_IMX_HDMI=y
+CONFIG_DRM_ETNAVIV=y
+CONFIG_DRM_MXSFB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
+CONFIG_SND_BCD2000=m
+CONFIG_SND_USB_POD=m
+CONFIG_SND_USB_PODHD=m
+CONFIG_SND_USB_TONEPORT=m
+CONFIG_SND_USB_VARIAX=m
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_CS42XX8_I2C=y
+CONFIG_SND_SOC_ES8328_I2C=y
+CONFIG_SND_SOC_ES8328_SPI=y
+CONFIG_SND_SOC_TLV320AIC23_I2C=y
+CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_WM8960=y
+CONFIG_SND_SOC_WM8962=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_UHID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_APPLEIR=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BETOP_FF=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CORSAIR=m
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CMEDIA=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_ELO=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GEMBIRD=m
+CONFIG_HID_GFRM=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_GT683R=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_ICADE=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LENOVO=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_HIDPP=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PENMOUNT=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PLANTRONICS=m
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_STEELSERIES=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_RMI=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THINGM=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_XINMO=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_HID_ALPS=m
+CONFIG_USB_LED_TRIG=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_FSM=y
+CONFIG_USB_LEDS_TRIGGER_USBPORT=y
+CONFIG_USB_MON=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_HCD_TEST_MODE=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MXUPORT=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_XSENS_MT=m
+CONFIG_USB_SERIAL_WISHBONE=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_HSIC_USB3503=m
+CONFIG_USB_HSIC_USB4604=m
+CONFIG_USB_LINK_LAYER_TEST=m
+CONFIG_USB_CHAOSKEY=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_G_NCM=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_NOKIA=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_USB_G_HID=m
+CONFIG_USB_G_DBGP=m
+CONFIG_USB_G_WEBCAM=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_INFINIBAND=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_ISL12022=y
+CONFIG_RTC_DRV_PCF8523=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_RC5T619=y
+CONFIG_RTC_DRV_DA9063=y
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_RTC_DRV_MXC=y
+CONFIG_RTC_DRV_MXC_V2=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMATEST=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_DMEM_GENIRQ=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_STAGING=y
+CONFIG_PRISM2_USB=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTL8192E=m
+CONFIG_R8712U=m
+CONFIG_R8188EU=m
+CONFIG_RTS5208=m
+CONFIG_VT6655=m
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_IMX_MEDIA=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IMX_GPCV2_PM_DOMAINS=y
+CONFIG_SOC_IMX8M=y
+CONFIG_EXTCON_ADC_JACK=m
+CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER_CB=m
+CONFIG_IIO_SW_DEVICE=m
+CONFIG_IIO_SW_TRIGGER=m
+CONFIG_MMA8452=y
+CONFIG_IMX7D_ADC=y
+CONFIG_RN5T618_ADC=y
+CONFIG_VF610_ADC=y
+CONFIG_SENSORS_ISL29018=y
+CONFIG_MAG3110=y
+CONFIG_MPL3115=y
+CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
+CONFIG_PWM_IMX27=y
+CONFIG_PWM_IMX_TPM=y
+CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_SNVS_LPGPR=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_MUX_MMIO=y
+CONFIG_SIOX=m
+CONFIG_SIOX_BUS_GPIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=y
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_FS_SECURITY=y
+CONFIG_F2FS_CHECK_FS=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_ORANGEFS_FS=m
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_PSTORE=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_BLOCKLAYOUT=y
+CONFIG_NFSD_SCSILAYOUT=y
+CONFIG_NFSD_FLEXFILELAYOUT=y
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_USER=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=y
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=y
+CONFIG_CRYPTO_RMD320=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA3=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_SAHARA=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
+CONFIG_CRC7=m
+CONFIG_CMA_SIZE_MBYTES=320
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_PROVE_LOCKING=y
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/tsimx6ul_defconfig b/arch/arm/configs/tsimx6ul_defconfig
new file mode 100644
index 000000000000..b4e869fb1ed9
--- /dev/null
+++ b/arch/arm/configs/tsimx6ul_defconfig
@@ -0,0 +1,967 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+# CONFIG_MEMCG_SWAP_ENABLED is not set
+CONFIG_BLK_CGROUP=y
+CONFIG_DEBUG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CHECKPOINT_RESTORE=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_BPF_SYSCALL=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
+CONFIG_SOC_IMX6UL=y
+CONFIG_SOC_IMX7D=y
+CONFIG_SOC_VF610=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_CMA=y
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_NET_IPVTI=m
+CONFIG_NET_FOU_IP_TUNNELS=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_MAC=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_FO=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_LOG_ARP=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_MASQ_IPV4=m
+CONFIG_NFT_REDIR_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_MASQ_IPV6=m
+CONFIG_NFT_REDIR_IPV6=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NFT_BRIDGE_META=m
+CONFIG_NFT_BRIDGE_REJECT=m
+CONFIG_NF_LOG_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_IP_SCTP=m
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_TIPC=m
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_LLC2=y
+CONFIG_6LOWPAN=m
+CONFIG_BATMAN_ADV=m
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_BATMAN_ADV_DEBUG=y
+CONFIG_OPENVSWITCH=m
+CONFIG_VSOCKETS=m
+CONFIG_NETLINK_DIAG=m
+CONFIG_MPLS_ROUTING=m
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_BPF_JIT=y
+CONFIG_CAN=y
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_LEDS=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_GS_USB=m
+CONFIG_CAN_KVASER_USB=m
+CONFIG_CAN_PEAK_USB=m
+CONFIG_CAN_8DEV_USB=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_6LOWPAN=m
+CONFIG_BT_LEDS=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_REGULATOR=y
+CONFIG_RFKILL_GPIO=y
+CONFIG_NFC=m
+CONFIG_NFC_DIGITAL=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_TRF7970A=m
+CONFIG_NFC_SIM=m
+CONFIG_NFC_PORT100=m
+CONFIG_NFC_MRVL_USB=m
+CONFIG_NFC_NXP_NCI=m
+CONFIG_NFC_NXP_NCI_I2C=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin"
+CONFIG_DMA_CMA=y
+CONFIG_IMX_WEIM=y
+CONFIG_TSPC104=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_OF_OVERLAY=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
+CONFIG_PATA_IMX=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_GENEVE=m
+CONFIG_NETCONSOLE=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NLMON=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MICREL_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
+CONFIG_USB_NET_CDC_MBIM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_CARL9170_HWRNG=y
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_USB=m
+CONFIG_AR5523=m
+CONFIG_ATH10K=m
+CONFIG_WCN36XX=m
+CONFIG_AT76C50X_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_WILC_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8187=m
+CONFIG_RTL8192CU=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RSI_91X=m
+# CONFIG_RSI_DEBUGFS is not set
+# CONFIG_RSI_SDIO is not set
+CONFIG_USB_ZD1201=m
+CONFIG_ZD1211RW=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_SNVS_PWRKEY=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_N_GSM=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=24
+CONFIG_SERIAL_8250_RUNTIME_UARTS=24
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_FSL_OTP=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_I2C_OCORES=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_OCORES=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_HSI=m
+CONFIG_HSI_CHAR=m
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_GPIO=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TS71XXWEIM=y
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_TS4900=y
+CONFIG_GPIO_74X164=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_MXC=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2413=m
+CONFIG_W1_SLAVE_DS2406=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_TS_WDT_MICRO=y
+CONFIG_TS7100_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_SI476X_CORE=y
+CONFIG_MFD_STMPE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_DTCS033=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TOUPTEK=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_VIDEO_USBTV=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=y
+CONFIG_RADIO_SI476X=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_DRM=y
+CONFIG_FB_MXS=y
+CONFIG_FB_ST7565P=m
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_WM8962=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_SPDIF=y
+CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_USB=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_HCD_TEST_MODE=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_TMC=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MXUPORT=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_XSENS_MT=m
+CONFIG_USB_SERIAL_WISHBONE=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_LD=m
+CONFIG_USB_EHSET_TEST_FIXTURE=y
+CONFIG_USB_YUREX=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_G_NCM=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_FUNCTIONFS_ETH=y
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_HID=m
+CONFIG_USB_G_WEBCAM=m
+CONFIG_USB_LED_TRIG=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_RTC_DRV_MXC=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMATEST=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER_CB=y
+CONFIG_IIO_SW_DEVICE=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_MMA8452=m
+CONFIG_IMX7D_ADC=m
+CONFIG_TS_SIMPLEADC=y
+CONFIG_VF610_ADC=y
+CONFIG_INV_MPU6050_I2C=m
+CONFIG_ST_ISM330DLC_IIO=m
+CONFIG_ST_ISM330DLC_XL_DATA_INJECTION=y
+CONFIG_AK8975=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_ST_MAG40_IIO=m
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_INTERRUPT_TRIGGER=y
+CONFIG_IIO_TIGHTLOOP_TRIGGER=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_TSWEIM_FPGA_INTC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_F2FS_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_OVERLAY_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_SMB2=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=y
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=y
+CONFIG_CRYPTO_RMD320=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
--
2.11.0

2022-07-14 08:37:51

by Krzysztof Kozlowski

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On 14/07/2022 00:12, Kris Bahnsen wrote:
> Add initial support of the i.MX6UL based TS-7553-V2 platform.

Use subject prefix matching the subsystem. git log --oneline --

>
> Signed-off-by: Kris Bahnsen <[email protected]>
> ---
>
> V1->V2: Implement changes recommended by Rob Herring and dtbs_check
>
> RFC only, not yet ready to merge, more testing needed and we're working on
> SPI LCD support for this platform.
>
> Specifically, I have a few questions on some paradigms and dtbs_check output:
>
> imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ... \
> 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], 'reg': [[12]]}}}} \
> is not of type 'array'
> I'm not sure what this error is referring to as I've copied the example in
> invensense,mpu6050.yaml almost verbatim. Is this an issue with our patch
> or a false positive from dtbs_check?

You would need to paste entire error, maybe with checker flags -v.

>
>
> imx6ul-ts7553v2.dtb: spi@2010000: spidev@1: 'compatible' is a required property
> Many of our devices have open-ended I2C and SPI ports that may or may not be
> used in customer applications. With "spidev" compatible string no longer
> supported, there is no easy way we know of to leave a placeholder or
> indication that the interface is present, usable, and either needs specific
> support enabled in kernel or userspace access via /dev/. We would love
> feedback on how to handle this situation when submitting platforms upstream.

No empty devices, especially for spidev in DTS. There is really no
single need to add fake spidev... really, why? The customer cannot read
hardware manual and cannot see the header on the board? You can give him
a tutorial/howto guide, but don't embed dead or non-real code in DTS.

>
>
> imx6ul-ts7553v2.dtb: wifi@0: compatible:0: 'microchip,wilc1000' was expected
> imx6ul-ts7553v2.dtb: wifi@0: compatible: ['microchip,wilc3000'...] is too long
> imx6ul-ts7553v2.dtb: wifi@0: 'chip_en-gpios' does not match any of the \
> regexes: pinctrl-[0-9]+'
> As noted in the comments in the dts, the WILC1000 in-kernel driver doesn't
> support the BLE features of the WILC3000. We maintain an external module
> tree that lets us build Microchip's official driver with WILC3000 support.
> Would the extraneous compatible string and property be accepted upstream
> in light of this?

No. No undocumented comaptibles with some wrong properties. chip_en is
clearly wrong, so it cannot go to DTS. Upstream driver or remove the node.

>
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +

This is a separate patch.

> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6ul-ts7553v2.dts | 693 ++++++++++
> arch/arm/configs/ts7970_defconfig | 1627 ++++++++++++++++++++++++
> arch/arm/configs/tsimx6ul_defconfig | 967 ++++++++++++++

This as well (and won't be accepted - no new defconfigs).

> 5 files changed, 3289 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6ul-ts7553v2.dts
> create mode 100644 arch/arm/configs/ts7970_defconfig
> create mode 100644 arch/arm/configs/tsimx6ul_defconfig
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index ef524378d449..05a4e5b39835 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -559,6 +559,7 @@ properties:
> - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf
> - technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit
> - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
> + - technologic,ts7553v2 # embeddedTS TS-7553-V2
> - const: fsl,imx6ul
>
> - description: i.MX6UL Armadeus Systems OPOS6UL SoM Board
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5112f493f494..72a26abafaa9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -709,6 +709,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ul-phytec-segin-ff-rdk-emmc.dtb \
> imx6ul-phytec-segin-ff-rdk-nand.dtb \
> imx6ul-prti6g.dtb \
> + imx6ul-ts7553v2.dtb \
> imx6ul-tx6ul-0010.dtb \
> imx6ul-tx6ul-0011.dtb \
> imx6ul-tx6ul-mainboard.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-ts7553v2.dts b/arch/arm/boot/dts/imx6ul-ts7553v2.dts
> new file mode 100644
> index 000000000000..8ed201f58137
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-ts7553v2.dts
> @@ -0,0 +1,693 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Technologic Systems, Inc. dba embeddedTS
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "imx6ul.dtsi"
> +
> +/ {
> + model = "embeddedTS i.MX6UL TS-7553-V2";
> + compatible = "technologic,ts7553v2", "fsl,imx6ul";
> +
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0>;
> + };
> +
> + leds {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> + compatible = "gpio-leds";
> +
> + green-led {

led-0

> + label = "green-led";

Rather use color and function, then labels.

> + gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
> + default-state = "on";
> + };
> +
> + red-led {

led-1

> + label = "red-led";
> + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> + left {

This fails on dtbs_check. Generic node names, so "key-0" or "key-left"

> + label = "Left";
> + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_LEFT>;
> + debounce-interval = <20>;
> + gpio-key,wakeup;
> + };
> +
> + up {

Same problem... and so on...

> + label = "Up";
> + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_UP>;
> + debounce-interval = <20>;
> + gpio-key,wakeup;
> + };

Missing blank line.

> + down {
> + label = "Down";
> + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_DOWN>;
> + debounce-interval = <20>;
> + gpio-key,wakeup;
> + };

Missing blank line.

> + right {
> + label = "Right";
> + gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_RIGHT>;
> + debounce-interval = <20>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + size = <0x4000000>;
> + linux,cma-default;
> + };
> + };
> +
> + reg_sd1_vmmc: regulator-sd1-vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "SD1-3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_enet_phy_3v3: regulator-phy {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet_3v3>;
> + regulator-name = "ENET-3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_flexcan_3v3: regulator-can-3v3 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan_3v3>;
> + regulator-name = "CAN-EN";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + i2c_gpio: i2c-gpio {

Generic node name, so "i2c"

> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2cgpio>;
> + sda-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";

Why do you add status? Isn't this a new node?

> +
> + mpu9250a: imu@68 {
> + compatible = "invensense,mpu9250";
> + reg = <0x68>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <1 IRQ_TYPE_EDGE_RISING>;
> + i2c-gate {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + magnetometer@c {
> + compatible = "asahi-kasei,ak8975";
> + reg = <0xc>;
> + };
> + };
> + };
> + };
> +};
> +
> +&gpio1 {
> + gpio-line-names = "", "USB-5V-EN", "", "", "", "", "", "",
> + "MODEM-5V-EN", "XBEE-3V3-EN", "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "RS232-XCEIVER-EN";
> +};
> +
> +&gpio2 {
> + gpio-line-names = "", "", "", "", "", "", "", "",
> + "XBEE-PIN-9", "XBEE-PIN-16", "", "", "", "",
> + "XBEE-PIN-12";
> +
> + /* XXX: Do more testing with with this. PFM mode normally enabled under
> + * 700 mA which is well below what the 7553v2 runs at. in PFM mode lower
> + * freq to minimize switching losses but less able to respond to fast
> + * transients */
> + vreg-mode-hog {
> + gpio-hog;
> + gpios = <13 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "VREG-MODE";
> + };
> +};
> +
> +&gpio3 {
> + gpio-line-names = "USB-HUB-RESET#", "", "", "", "", "", "",
> + "USB-MUX-CPU-OTG", "", "", "", "NO-CHRG-JMP#", "", "", "", "",
> + "", "SD-BOOT-JMP#", "PUSH-SW#", "U-BOOT-JMP#", "XBEE-RESET#",
> + "", "", "RES-STRAP-0", "RES-STRAP-1", "", "",
> + "RES-STRAP-2", "RES-STRAP-3";
> +};
> +
> +&gpio5 {
> + gpio-line-names = "POWER-FAIL#", "", "EMMC-PWR-EN", "", "", "", "",
> + "XBEE-USB-EN#", "RELAY-EN";
> +
> + vdd-soc-in-v-hog {
> + gpio-hog;
> + gpios = <3 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "VDD-SOC-IN-V";
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + m41t00s: rtc@68 {
> + compatible = "st,m41t00";
> + reg = <0x68>;
> + };
> +};
> +
> +
> +&i2c3 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +};
> +
> +&ecspi3 {
> + num-cs = <3>;
> + cs-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>, <&gpio2 15 GPIO_ACTIVE_LOW>, <&gpio5 6 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + status = "okay";
> +
> + st7565p: lcd@0 {
> + /* TODO: Add driver support for Sitronix ST7565p */
> + reg = <0>;
> + spi-max-frequency = <5000000>;
> + };
> +
> + spidevdc: spidev@1 {

No empty devices, especially for spidev in DTS.

> + /*
> + * Open interface on pin-header. Add appropriate "compatible"
> + * and related properties here. The "reg" property should
> + * remain as-is.
> + */
> + reg = <1>;
> + };
> +
> + fm25l16b: eeprom@2 {
> + compatible = "atmel,at25";
> + reg = <2>;
> + spi-max-frequency = <20000000>;
> + size = <0x800>;
> + address-width = <16>;
> + pagesize = <64>;
> + };
> +};
> +
> +&ecspi4 {
> + num-cs = <1>;
> + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi4>;
> + status = "okay";
> +
> + /*
> + * In testing, the in-kernel wilc1000 driver was non-functional on SPI.
> + * However, it is possible to build the official Microchip driver
> + * outside of their kernel tree as an external module and it works
> + * just fine and allows for true WILC3000 compatibility with BLE support.
> + * The below compatible string is structured to prefer the external
> + * module and fallback to in-kernel if that ever becomes functional.
> + * Additionally, using both chip_en and enable gpios are in order to
> + * support both the external module and in-kernel driver.
> + */
> + wilc: wifi@0 {
> + compatible = "microchip,wilc3000", "microchip,wilc1000";
> + reg = <0>;
> + spi-max-frequency = <48000000>;
> + reset-gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
> + chip_en-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;

There is no such property and it fails to match guidelines (underscore)
.
> + enable-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <1 GPIO_ACTIVE_HIGH>;
> + status = "okay";

Why status?

> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-handle = <&ethphy0>;
> + phy-supply = <&reg_enet_phy_3v3>;
> + status = "okay";
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <2>;
> + micrel,led-mode = <1>;
> + clocks = <&clks IMX6UL_CLK_ENET_REF>;
> + clock-names = "rmii-ref";
> + };
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + xceiver-supply = <&reg_flexcan_3v3>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + xceiver-supply = <&reg_flexcan_3v3>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + /*
> + * Need to use GPIO for TXEN even though CTS is available on this port.
> + * All instances of the UART2 RTS signal have other uses therefore leaving
> + * the UART module RTS_B input unconnected which generates spurious IRQs.
> + * If the imx.c driver is ever adjusted to allow configuration of RTSDEN
> + * then it may be possible to use real CTS here if RTS IRQs are disabled.
> + */
> + rts-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> + linux,rs485-enabled-at-boot-time;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + status = "okay";
> +};
> +
> +&uart6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart6>;
> + cts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> + rts-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&uart7 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart7>;
> + status = "okay";
> +};
> +
> +&uart8 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart8>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + dr_mode = "peripheral";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb_otg1_id>;
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + dr_mode = "host";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + keep-power-in-suspend;
> + disable-wp;
> + broken-cd;
> + bus-width = <4>;
> + vmmc-supply = <&reg_sd1_vmmc>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v;
> + disable-wp;
> + broken-cd;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog1>;
> + fsl,ext-reset-output;
> +};
> +
> +&snvs_rtc {
> + status = "disabled";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* Reserved signals */
> + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b020
> + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1a020
> + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x1a020
> + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x1a020
> + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x1a020
> + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x13020
> + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x1b020
> + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b020
> + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b020
> + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b020
> + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x1b020
> +
> +
> + /* Has hardware pull resistor */
> + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x1a020 /* U_BOOT_JMP#_ */
> + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x1a020 /* NO_CHRG_JMP# */
> + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x1a020 /* SD_BOOT_JMP# */
> + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x1a020 /* 6UL_TO_USB_DEV */
> + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x1a020 /* MODEM 5 v */
> + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1a020 /* XBee 3.3 v */
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1a020 /* eMMC En. */
> + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0a0
> +
> + /* Needs internal pull resistor */
> + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b020 /* RES_STRAP_0 */
> + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b020 /* RES_STRAP_1 */
> + MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x1b020 /* RES_STRAP_2 */
> + MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x1b020 /* RES_STRAP_3 */
> + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x1b020 /* XBEE_RESET# */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b020 /* XBEE_USB_EN# */
> + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b020 /* XBEE_DIO_8 */
> + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b020 /* XBEE_DIO_7 */
> + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b020 /* XBEE_DIO_6 */
> + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1a020 /* RELAY_EN */
> + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x1b020 /* USB 5v EN */
> + MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x1b020 /* USB_HUB_RESET# */
> + MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M 0x1b020 /* USB hub */
> + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x1a020 /* PUSH_SW_CPU# */
> + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x1b020 /* 232_TRANS_EN */
> + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b020 /* POWER_FAIL */
> + >;
> + };
> +
> + pinctrl_gpio_keys: gpiokeysgrp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x1a020 /* Left */
> + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x1a020 /* Up */
> + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1a020 /* Down */
> + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1a020 /* Right */
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledgrp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x1b020 /* Red LED */
> + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x1b020 /* Grn LED */
> + >;
> + };
> +
> + pinctrl_usb_otg1_id: usbotg1idgrp {
> + /* Wired always high for device mode on TS-7553-V2 */
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x16059
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp{
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020
> + MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp{
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x1b020
> + MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x1b020
> + >;
> + };
> +
> + pinctrl_flexcan_3v3: flexcan3v3grp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b020 /* CAN En. */
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
> + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
> + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
> + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
> + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
> + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart6: uart6grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
> + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1
> + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart7: uart7grp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1
> + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart8: uart8grp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x1b0b1
> + MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
> + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
> + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
> + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
> + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
> + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
> + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
> + >;
> + };
> +
> + pinctrl_enet_3v3: enet3v3grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001a8b0
> + MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001a8b0
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x4001a8b0
> + MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x4001a8b0
> + >;
> + };
> +
> + pinctrl_i2cgpio: i2cgrpgpio {

Name not matching schema, as they must end with grp. Derive your board
from something new, not ancient...

> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x4001a8b0
> + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x4001a8b0
> + MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x13020 /* IMU IRQ */
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + /* hysteresis, en 47k PU */
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x17059 /* EN_SD_POWER */
> + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {

Same.

> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {

No really...

> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
> + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
> + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
> + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
> + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
> + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + // XXX: These are not defined with GPIO names
> + // See about porting LCD driver?
> + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x1b020 /* LCD_BKLT */
> + MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x1b020 /* LCD_RESET# */
> + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b020 /* LCD_CMD# */
> + MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x1b020 /* SPI_3_CLK */
> + MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x1b020 /* SPI_3_MOSI */
> + MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x1b820 /* SPI_3_MISO */
> + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x1b020 /* LCD CS0# */
> + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b020 /* HD1 CS1# */
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b020 /* FRAM CS2# */
> + >;
> + };
> +
> + pinctrl_ecspi4: ecspi4grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b020
> + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b020
> + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b020
> + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b020 /* WIFI CS# */
> + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b020 /* WIFI IRQ# */
> + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x1b020 /* WIFI RST# */
> + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x1b020 /* WIFI EN */
> + >;
> + };
> +
> + pinctrl_wdog1: wdog1grp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0xb8b0
> + >;
> + };
> +};
> diff --git a/arch/arm/configs/ts7970_defconfig b/arch/arm/configs/ts7970_defconfig
> new file mode 100644
> index 000000000000..a96831752449

Rest is not accepted as not explained/justified.


Best regards,
Krzysztof

2022-07-14 21:31:40

by Kris Bahnsen

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On Thu, 2022-07-14 at 10:34 +0200, Krzysztof Kozlowski wrote:
> On 14/07/2022 00:12, Kris Bahnsen wrote:
> > Add initial support of the i.MX6UL based TS-7553-V2 platform.
>
> Use subject prefix matching the subsystem. git log --oneline --

Can you please elaborate? The subject prefix is "ARM: dts:", I'm not
sure what is missing. Should it be something like
"ARM: dts: imx6ul-ts7553v2:" in this case?

>
> >
> > Signed-off-by: Kris Bahnsen <[email protected]>
> > ---
> >
> > V1->V2: Implement changes recommended by Rob Herring and dtbs_check
> >
> > RFC only, not yet ready to merge, more testing needed and we're working on
> > SPI LCD support for this platform.
> >
> > Specifically, I have a few questions on some paradigms and dtbs_check output:
> >
> > imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ... \
> > 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], 'reg': [[12]]}}}} \
> > is not of type 'array'
> > I'm not sure what this error is referring to as I've copied the example in
> > invensense,mpu6050.yaml almost verbatim. Is this an issue with our patch
> > or a false positive from dtbs_check?
>
> You would need to paste entire error, maybe with checker flags -v.

Here is the verbose output. I'm not familiar enough yet with the schema and its
validation code to catch what is wrong and would appreciate any insight.

Check: arch/arm/boot/dts/imx6ul-ts7553v2.dtb
/work/arch/arm/boot/dts/imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ['i2c-gpio'], \
'#address-cells': [[1]], '#size-cells': [[0]], 'pinctrl-names': ['default'], \
'pinctrl-0': [[58]], 'sda-gpios': [[11, 5, 6]], 'scl-gpios': [[11, 4, 6]], \
'imu@68': {'compatible': ['invensense,mpu9250'], 'reg': [[104]], \
'interrupt-parent': [[55]], 'interrupts': [[1, 1]], 'i2c-gate': {'#address-cells': [[1]], \
'#size-cells': [[0]], 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], \
'reg': [[12]]}}}} is not of type 'array'

Failed validating 'type' in schema['patternProperties']['(?<!,nr)-gpios?$']:
{'items': {'additionalItems': {'$ref': '#/definitions/cell'},
'items': [{'oneOf': [{'maximum': 4294967295,
'minimum': 1,
'phandle': True,
'type': 'integer'},
{'const': 0, 'type': 'integer'}]}],
'minItems': 1,
'type': 'array'},
'minItems': 1,
'type': 'array'}

On instance['i2c-gpio']:
{'#address-cells': [[1]],
'#size-cells': [[0]],
'compatible': ['i2c-gpio'],
'imu@68': {'compatible': ['invensense,mpu9250'],
'i2c-gate': {'#address-cells': [[1]],
'#size-cells': [[0]],
'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'],
'reg': [[12]]}},
'interrupt-parent': [[55]],
'interrupts': [[1, 1]],
'reg': [[104]]},
'pinctrl-0': [[58]],
'pinctrl-names': ['default'],
'scl-gpios': [[11, 4, 6]],
'sda-gpios': [[11, 5, 6]]}
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/gpio/gpio-consumer.yaml

>
> >
> >
> > imx6ul-ts7553v2.dtb: spi@2010000: spidev@1: 'compatible' is a required property
> > Many of our devices have open-ended I2C and SPI ports that may or may not be
> > used in customer applications. With "spidev" compatible string no longer
> > supported, there is no easy way we know of to leave a placeholder or
> > indication that the interface is present, usable, and either needs specific
> > support enabled in kernel or userspace access via /dev/. We would love
> > feedback on how to handle this situation when submitting platforms upstream.
>
> No empty devices, especially for spidev in DTS. There is really no
> single need to add fake spidev... really, why? The customer cannot read
> hardware manual and cannot see the header on the board? You can give him
> a tutorial/howto guide, but don't embed dead or non-real code in DTS.

We ship devices as bootable out of the box. A number of our customers end up
attaching SPI devices that do not have existing kernel drivers and talk to them
from userspace without having to touch a kernel build. The loss of spidev
directly has increased support requests we receive on the matter.

>
> >
> >
> > imx6ul-ts7553v2.dtb: wifi@0: compatible:0: 'microchip,wilc1000' was expected
> > imx6ul-ts7553v2.dtb: wifi@0: compatible: ['microchip,wilc3000'...] is too long
> > imx6ul-ts7553v2.dtb: wifi@0: 'chip_en-gpios' does not match any of the \
> > regexes: pinctrl-[0-9]+'
> > As noted in the comments in the dts, the WILC1000 in-kernel driver doesn't
> > support the BLE features of the WILC3000. We maintain an external module
> > tree that lets us build Microchip's official driver with WILC3000 support.
> > Would the extraneous compatible string and property be accepted upstream
> > in light of this?
>
> No. No undocumented comaptibles with some wrong properties. chip_en is
> clearly wrong, so it cannot go to DTS. Upstream driver or remove the node.

Unfortunate, but, understood.

>
> >
> >
> > Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>
> This is a separate patch.

Makes sense.

>
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/imx6ul-ts7553v2.dts | 693 ++++++++++
> > arch/arm/configs/ts7970_defconfig | 1627 ++++++++++++++++++++++++
> > arch/arm/configs/tsimx6ul_defconfig | 967 ++++++++++++++
>
> This as well (and won't be accepted - no new defconfigs).

The defconfigs being included were an oversight and absolutely sloppy on my
part. I sincerely apologize for that.

>
> >
> > +
> > + leds {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_gpio_leds>;
> > + compatible = "gpio-leds";
> > +
> > + green-led {
>
> led-0
>
> > + label = "green-led";
>
> Rather use color and function, then labels.

Fixed, thank you. I was unaware of this newer set of properties and I've
found where they are clearly spelled out.

>
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > +
> > + left {
>
> This fails on dtbs_check. Generic node names, so "key-0" or "key-left"

For reference, as of commit b047602d579b4fb028128a525f056bbdc890e7f0, there
are no errors/warnings from dtbs_check or checkpatch.pl regarding node
names being "key-..." and the example in gpio-keys.yaml uses "up" "left" etc.

I've also changed the node name to just "keys" per devicetree specifications
doc.

>
> > + i2c_gpio: i2c-gpio {
>
> Generic node name, so "i2c"

Understood.

Are there any guidelines/restrictions on label use/schema 
throughout a dts file? The devicetree-specification document only defines
valid characters for a label and I've been unable to find any other docs.

>
> > + compatible = "i2c-gpio";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2cgpio>;
> > + sda-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> > + scl-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "okay";
>
> Why do you add status? Isn't this a new node?

That was my mistake, Rob pointed it out in v1 and I forgot to remove it.

>
> > +
> > + pinctrl_i2cgpio: i2cgrpgpio {
>
> Name not matching schema, as they must end with grp. Derive your board
> from something new, not ancient...
> > +
> > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
>
> Same.
>
> >
> > +
> > + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
>
> No really...
>

Thanks for pointing this out, I was unable to find any specific docs on the
pinctrl node name schema and dtbs_check gave no errors on it.

> >
> > +};
> > diff --git a/arch/arm/configs/ts7970_defconfig b/arch/arm/configs/ts7970_defconfig
> > new file mode 100644
> > index 000000000000..a96831752449
>
> Rest is not accepted as not explained/justified.
>
>
> Best regards,
> Krzysztof

Many thanks for the review.

2022-07-15 06:51:08

by Krzysztof Kozlowski

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On 14/07/2022 23:26, Kris Bahnsen wrote:
> On Thu, 2022-07-14 at 10:34 +0200, Krzysztof Kozlowski wrote:
>> On 14/07/2022 00:12, Kris Bahnsen wrote:
>>> Add initial support of the i.MX6UL based TS-7553-V2 platform.
>>
>> Use subject prefix matching the subsystem. git log --oneline --
>
> Can you please elaborate? The subject prefix is "ARM: dts:", I'm not
> sure what is missing. Should it be something like
> "ARM: dts: imx6ul-ts7553v2:" in this case?

Run the command, you will see.

>
>>
>>>
>>> Signed-off-by: Kris Bahnsen <[email protected]>
>>> ---
>>>
>>> V1->V2: Implement changes recommended by Rob Herring and dtbs_check
>>>
>>> RFC only, not yet ready to merge, more testing needed and we're working on
>>> SPI LCD support for this platform.
>>>
>>> Specifically, I have a few questions on some paradigms and dtbs_check output:
>>>
>>> imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ... \
>>> 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], 'reg': [[12]]}}}} \
>>> is not of type 'array'
>>> I'm not sure what this error is referring to as I've copied the example in
>>> invensense,mpu6050.yaml almost verbatim. Is this an issue with our patch
>>> or a false positive from dtbs_check?
>>
>> You would need to paste entire error, maybe with checker flags -v.
>
> Here is the verbose output. I'm not familiar enough yet with the schema and its
> validation code to catch what is wrong and would appreciate any insight.
>
> Check: arch/arm/boot/dts/imx6ul-ts7553v2.dtb
> /work/arch/arm/boot/dts/imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ['i2c-gpio'], \
> '#address-cells': [[1]], '#size-cells': [[0]], 'pinctrl-names': ['default'], \
> 'pinctrl-0': [[58]], 'sda-gpios': [[11, 5, 6]], 'scl-gpios': [[11, 4, 6]], \
> 'imu@68': {'compatible': ['invensense,mpu9250'], 'reg': [[104]], \
> 'interrupt-parent': [[55]], 'interrupts': [[1, 1]], 'i2c-gate': {'#address-cells': [[1]], \
> '#size-cells': [[0]], 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], \
> 'reg': [[12]]}}}} is not of type 'array'
>
> Failed validating 'type' in schema['patternProperties']['(?<!,nr)-gpios?$']:
> {'items': {'additionalItems': {'$ref': '#/definitions/cell'},
> 'items': [{'oneOf': [{'maximum': 4294967295,
> 'minimum': 1,
> 'phandle': True,
> 'type': 'integer'},
> {'const': 0, 'type': 'integer'}]}],
> 'minItems': 1,
> 'type': 'array'},
> 'minItems': 1,
> 'type': 'array'}
>
> On instance['i2c-gpio']:

Because you use "i2c-gpio", it seems... Fix it and check if error goes away.

> {'#address-cells': [[1]],
> '#size-cells': [[0]],
> 'compatible': ['i2c-gpio'],
> 'imu@68': {'compatible': ['invensense,mpu9250'],
> 'i2c-gate': {'#address-cells': [[1]],
> '#size-cells': [[0]],
> 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'],
> 'reg': [[12]]}},
> 'interrupt-parent': [[55]],
> 'interrupts': [[1, 1]],
> 'reg': [[104]]},
> 'pinctrl-0': [[58]],
> 'pinctrl-names': ['default'],
> 'scl-gpios': [[11, 4, 6]],
> 'sda-gpios': [[11, 5, 6]]}
> From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/gpio/gpio-consumer.yaml
>
>>
>>>
>>>
>>> imx6ul-ts7553v2.dtb: spi@2010000: spidev@1: 'compatible' is a required property
>>> Many of our devices have open-ended I2C and SPI ports that may or may not be
>>> used in customer applications. With "spidev" compatible string no longer
>>> supported, there is no easy way we know of to leave a placeholder or
>>> indication that the interface is present, usable, and either needs specific
>>> support enabled in kernel or userspace access via /dev/. We would love
>>> feedback on how to handle this situation when submitting platforms upstream.
>>
>> No empty devices, especially for spidev in DTS. There is really no
>> single need to add fake spidev... really, why? The customer cannot read
>> hardware manual and cannot see the header on the board? You can give him
>> a tutorial/howto guide, but don't embed dead or non-real code in DTS.
>
> We ship devices as bootable out of the box. A number of our customers end up
> attaching SPI devices that do not have existing kernel drivers and talk to them
> from userspace without having to touch a kernel build. The loss of spidev
> directly has increased support requests we receive on the matter.

Unfortunately this is an argument like - our customers always wanted
dead code in DTS, so we embed here such. Feel free to add a comment
about placeholder etc, but empty node not. Another issue is that empty
node without compatible also does not help your customers...

>
(...)

>
>>
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_gpio_keys>;
>>> +
>>> + left {
>>
>> This fails on dtbs_check. Generic node names, so "key-0" or "key-left"
>
> For reference, as of commit b047602d579b4fb028128a525f056bbdc890e7f0, there
> are no errors/warnings from dtbs_check or checkpatch.pl regarding node
> names being "key-..." and the example in gpio-keys.yaml uses "up" "left" etc.

I know, I changed it. It's in linux-next.

>
> I've also changed the node name to just "keys" per devicetree specifications
> doc.
>
>>
>>> + i2c_gpio: i2c-gpio {
>>
>> Generic node name, so "i2c"
>
> Understood.
>
> Are there any guidelines/restrictions on label use/schema 
> throughout a dts file? The devicetree-specification document only defines
> valid characters for a label and I've been unable to find any other docs.

For label - use underscores and that's it. Only the node names should be
generic.

>

Best regards,
Krzysztof

2022-07-15 18:01:14

by Kris Bahnsen

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On Fri, 2022-07-15 at 08:42 +0200, Krzysztof Kozlowski wrote:
> On 14/07/2022 23:26, Kris Bahnsen wrote:
> > On Thu, 2022-07-14 at 10:34 +0200, Krzysztof Kozlowski wrote:
> > > On 14/07/2022 00:12, Kris Bahnsen wrote:
> > > > Add initial support of the i.MX6UL based TS-7553-V2 platform.
> > >
> > > Use subject prefix matching the subsystem. git log --oneline --
> >
> > Can you please elaborate? The subject prefix is "ARM: dts:", I'm not
> > sure what is missing. Should it be something like
> > "ARM: dts: imx6ul-ts7553v2:" in this case?
>
> Run the command, you will see.

I had previously run the command and the output of it did not make sense in
the context of your prior comment. Forgive my ignorance, but I'd like to
understand specifically what you mean here so we can do the correct thing
in the future.

$ git log --oneline -- | head -n 20
d14ee2d5a506 ARM: dts: Add TS-7553-V2 support
b047602d579b Merge tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
1e1fb420fe68 samples: Use KSYM_NAME_LEN for kprobes
e3655dfa5805 fprobe/samples: Make sample_probe static
0bb7e14c8e15 blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon
0a6d7d45414a ftrace: Be more specific about arch impact when function tracer is enabled
495fcec8648c tracing: Fix sleeping while atomic in kdb ftdump
7edc3945bdce tracing/histograms: Fix memory leak problem
72a8e05d4f66 Merge tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
29851567d1aa Merge tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drm
0d8ba24e72b6 Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
c27c753ea6fd x86/static_call: Serialize __static_call_fixup() properly
ce114c866860 Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
3590b44b9434 Merge tag 'drm-misc-fixes-2022-07-07-1' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
42e0a87233e3 Merge tag 'drm-intel-fixes-2022-07-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
7de96365878f Merge tag 'amd-drm-fixes-5.19-2022-07-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
5a29232d870d Merge tag 'for-5.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
23458ac91dc8 Merge tags 'free-mq_sysctls-for-v5.19' and 'ptrace_unfreeze_fix-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
8e59a6a7a4fa Merge tag 'mm-hotfixes-stable-2022-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
b5374396e5de Merge tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

>
> >
> > >
> > > >
> > > > Signed-off-by: Kris Bahnsen <[email protected]>
> > > > ---
> > > >
> > > > V1->V2: Implement changes recommended by Rob Herring and dtbs_check
> > > >
> > > > RFC only, not yet ready to merge, more testing needed and we're working on
> > > > SPI LCD support for this platform.
> > > >
> > > > Specifically, I have a few questions on some paradigms and dtbs_check output:
> > > >
> > > > imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ... \
> > > > 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], 'reg': [[12]]}}}} \
> > > > is not of type 'array'
> > > > I'm not sure what this error is referring to as I've copied the example in
> > > > invensense,mpu6050.yaml almost verbatim. Is this an issue with our patch
> > > > or a false positive from dtbs_check?
> > >
> > > You would need to paste entire error, maybe with checker flags -v.
> >
> > Here is the verbose output. I'm not familiar enough yet with the schema and its
> > validation code to catch what is wrong and would appreciate any insight.
> >
> > Check: arch/arm/boot/dts/imx6ul-ts7553v2.dtb
> > /work/arch/arm/boot/dts/imx6ul-ts7553v2.dtb: /: i2c-gpio: {'compatible': ['i2c-gpio'], \
> > '#address-cells': [[1]], '#size-cells': [[0]], 'pinctrl-names': ['default'], \
> > 'pinctrl-0': [[58]], 'sda-gpios': [[11, 5, 6]], 'scl-gpios': [[11, 4, 6]], \
> > 'imu@68': {'compatible': ['invensense,mpu9250'], 'reg': [[104]], \
> > 'interrupt-parent': [[55]], 'interrupts': [[1, 1]], 'i2c-gate': {'#address-cells': [[1]], \
> > '#size-cells': [[0]], 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'], \
> > 'reg': [[12]]}}}} is not of type 'array'
> >
> > Failed validating 'type' in schema['patternProperties']['(?<!,nr)-gpios?$']:
> > {'items': {'additionalItems': {'$ref': '#/definitions/cell'},
> > 'items': [{'oneOf': [{'maximum': 4294967295,
> > 'minimum': 1,
> > 'phandle': True,
> > 'type': 'integer'},
> > {'const': 0, 'type': 'integer'}]}],
> > 'minItems': 1,
> > 'type': 'array'},
> > 'minItems': 1,
> > 'type': 'array'}
> >
> > On instance['i2c-gpio']:
>
> Because you use "i2c-gpio", it seems... Fix it and check if error goes away.

You are correct, the error no longer appears after I had fixed the node name.

>
> > {'#address-cells': [[1]],
> > '#size-cells': [[0]],
> > 'compatible': ['i2c-gpio'],
> > 'imu@68': {'compatible': ['invensense,mpu9250'],
> > 'i2c-gate': {'#address-cells': [[1]],
> > '#size-cells': [[0]],
> > 'magnetometer@c': {'compatible': ['asahi-kasei,ak8975'],
> > 'reg': [[12]]}},
> > 'interrupt-parent': [[55]],
> > 'interrupts': [[1, 1]],
> > 'reg': [[104]]},
> > 'pinctrl-0': [[58]],
> > 'pinctrl-names': ['default'],
> > 'scl-gpios': [[11, 4, 6]],
> > 'sda-gpios': [[11, 5, 6]]}
> > From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/gpio/gpio-consumer.yaml
> >
> > >
> > > >
> > > >
> > > > imx6ul-ts7553v2.dtb: spi@2010000: spidev@1: 'compatible' is a required property
> > > > Many of our devices have open-ended I2C and SPI ports that may or may not be
> > > > used in customer applications. With "spidev" compatible string no longer
> > > > supported, there is no easy way we know of to leave a placeholder or
> > > > indication that the interface is present, usable, and either needs specific
> > > > support enabled in kernel or userspace access via /dev/. We would love
> > > > feedback on how to handle this situation when submitting platforms upstream.
> > >
> > > No empty devices, especially for spidev in DTS. There is really no
> > > single need to add fake spidev... really, why? The customer cannot read
> > > hardware manual and cannot see the header on the board? You can give him
> > > a tutorial/howto guide, but don't embed dead or non-real code in DTS.
> >
> > We ship devices as bootable out of the box. A number of our customers end up
> > attaching SPI devices that do not have existing kernel drivers and talk to them
> > from userspace without having to touch a kernel build. The loss of spidev
> > directly has increased support requests we receive on the matter.
>
> Unfortunately this is an argument like - our customers always wanted
> dead code in DTS, so we embed here such. Feel free to add a comment
> about placeholder etc, but empty node not. Another issue is that empty
> node without compatible also does not help your customers...
>
> >
>
> (...)
>
> >
> > >
> > > > +
> > > > + gpio-keys {
> > > > + compatible = "gpio-keys";
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > > > +
> > > > + left {
> > >
> > > This fails on dtbs_check. Generic node names, so "key-0" or "key-left"
> >
> > For reference, as of commit b047602d579b4fb028128a525f056bbdc890e7f0, there
> > are no errors/warnings from dtbs_check or checkpatch.pl regarding node
> > names being "key-..." and the example in gpio-keys.yaml uses "up" "left" etc.
>
> I know, I changed it. It's in linux-next.
>
> >
> > I've also changed the node name to just "keys" per devicetree specifications
> > doc.
> >
> > >
> > > > + i2c_gpio: i2c-gpio {
> > >
> > > Generic node name, so "i2c"
> >
> > Understood.
> >
> > Are there any guidelines/restrictions on label use/schema 
> > throughout a dts file? The devicetree-specification document only defines
> > valid characters for a label and I've been unable to find any other docs.
>
> For label - use underscores and that's it. Only the node names should be
> generic.
>
> >
>
> Best regards,
> Krzysztof
>

2022-07-18 13:01:19

by Krzysztof Kozlowski

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On 15/07/2022 19:54, Kris Bahnsen wrote:
> On Fri, 2022-07-15 at 08:42 +0200, Krzysztof Kozlowski wrote:
>> On 14/07/2022 23:26, Kris Bahnsen wrote:
>>> On Thu, 2022-07-14 at 10:34 +0200, Krzysztof Kozlowski wrote:
>>>> On 14/07/2022 00:12, Kris Bahnsen wrote:
>>>>> Add initial support of the i.MX6UL based TS-7553-V2 platform.
>>>>
>>>> Use subject prefix matching the subsystem. git log --oneline --
>>>
>>> Can you please elaborate? The subject prefix is "ARM: dts:", I'm not
>>> sure what is missing. Should it be something like
>>> "ARM: dts: imx6ul-ts7553v2:" in this case?
>>
>> Run the command, you will see.
>
> I had previously run the command and the output of it did not make sense in
> the context of your prior comment. Forgive my ignorance, but I'd like to
> understand specifically what you mean here so we can do the correct thing
> in the future.
>
> $ git log --oneline -- | head -n 20

This obviously does not make sense. -- as you can read in git log help
and several other Unix/Linux commands is marking path arguments. You
want to run it on specific subsystem, don't you?

Best regards,
Krzysztof

2022-07-19 19:03:59

by Kris Bahnsen

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On Mon, 2022-07-18 at 14:49 +0200, Krzysztof Kozlowski wrote:
> On 15/07/2022 19:54, Kris Bahnsen wrote:
> > On Fri, 2022-07-15 at 08:42 +0200, Krzysztof Kozlowski wrote:
> > > On 14/07/2022 23:26, Kris Bahnsen wrote:
> > > > On Thu, 2022-07-14 at 10:34 +0200, Krzysztof Kozlowski wrote:
> > > > > On 14/07/2022 00:12, Kris Bahnsen wrote:
> > > > > > Add initial support of the i.MX6UL based TS-7553-V2 platform.
> > > > >
> > > > > Use subject prefix matching the subsystem. git log --oneline --
> > > >
> > > > Can you please elaborate? The subject prefix is "ARM: dts:", I'm not
> > > > sure what is missing. Should it be something like
> > > > "ARM: dts: imx6ul-ts7553v2:" in this case?
> > >
> > > Run the command, you will see.
> >
> > I had previously run the command and the output of it did not make sense in
> > the context of your prior comment. Forgive my ignorance, but I'd like to
> > understand specifically what you mean here so we can do the correct thing
> > in the future.
> >
> > $ git log --oneline -- | head -n 20
>
> This obviously does not make sense. -- as you can read in git log help
> and several other Unix/Linux commands is marking path arguments. You
> want to run it on specific subsystem, don't you?

I've looked at commits for imx6ul-* devicetree files and that was how
I derived this commit/subject. I see a number of different patterns
and if one is preferred over the other I would appreciate the
clarification.

e.g. looking at commits of imx6ul-*
"ARM: dts:" is used for a number of initial devicetree commits
"ARM: dts: imx6ul: <board>:" is used a few times
"ARM: dts: imx6ul-<board>:" is also used a few times

For initial commits of a devicetree, or modifications of a devicetree,
what is the preferred pattern moving forward?

Thank you for your continued support.

>
> Best regards,
> Krzysztof
>

2022-07-19 19:09:55

by Krzysztof Kozlowski

Subject: Re: [RFC PATCH v2] ARM: dts: Add TS-7553-V2 support

On 19/07/2022 19:39, Kris Bahnsen wrote:
>
> e.g. looking at commits of imx6ul-*
> "ARM: dts:" is used for a number of initial devicetree commits
> "ARM: dts: imx6ul: <board>:" is used a few times
> "ARM: dts: imx6ul-<board>:" is also used a few times
>
> For initial commits of a devicetree, or modifications of a devicetree,
> what is the preferred pattern moving forward?

The last two, although also these appear:
ARM: dts: imx:
ARM: dts: fsl:
I don't have a clear answer which is the best, but the point is to have
proper subarch prefix.


Best regards,
Krzysztof