2022-07-13 08:56:54

by Xin Ji

[permalink] [raw]
Subject: [PATCH v18 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

Add analogix PD chip anx7411 device binding

Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Xin Ji <[email protected]>

---
v17 -> v18 : Change node name from "usb_typec" to "typec"
v16 -> v17 : Add node name "usb_typec"
v15 -> v16 : No changes
v14 -> v15 : No changes
v13 -> v14 :
1. Fix Robot compile error. Fix node name not correct.
2. Change HEX to lowercase.
3. Use "ports" property.
v12 -> v13 :
1. Drop the quotes for "$id" and "$schema"
2. Remove "allOf" label
3. Change node name from "i2c1" to "i2c"
4. Change node name from "typec" to "usb-typec"
---
.../bindings/usb/analogix,anx7411.yaml | 81 +++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml

diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
new file mode 100644
index 000000000000..080bb9a61f40
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7411 Type-C controller bindings
+
+maintainers:
+ - Xin Ji <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - analogix,anx7411
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ connector:
+ type: object
+ $ref: ../connector/usb-connector.yaml
+ description:
+ Properties for usb c connector.
+
+ properties:
+ compatible:
+ const: usb-c-connector
+
+ power-role: true
+
+ data-role: true
+
+ try-power-role: true
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - connector
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec: anx7411@2c {
+ compatible = "analogix,anx7411";
+ reg = <0x2c>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio0>;
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ typec_con_ep: endpoint {
+ remote-endpoint = <&usbotg_hs_ep>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
--
2.25.1


2022-07-13 08:57:08

by Xin Ji

[permalink] [raw]
Subject: [PATCH v18 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support

Add driver for analogix ANX7411 USB Type-C DRP port controller.

Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Xin Ji <[email protected]>
---
V17 -> V18 : No changes
V16 -> V17 : No changes
V15 -> V16 : Remove report Reported-by tag
V14 -> V15 :
1. Fix robot compile warning
2. Add function return value check
V12 -> V13 :
1. Add driver description
2. Checking return value for each i2c operation
V11 -> V12 : Remove all define in anx7411.h to anx7411.c
V10 -> V11 : Fix Heikki's comment, code clean up
V9 -> V10 : Rebase on the latest code
V6 -> V7 : Fix Heikki's comment
Rebase on Greg's latest usb-next branch
Move tcpci.h to include/linux/usb/
Remove double definition
V5 -> V6 : Fix Heikki's comment
V4 -> V5 : Fix Greg h-k comment, remove DEBUG define
V3 -> V4 : Fix compiling waring
V2 -> V3 : Add changelog history
V1 -> V2 : Fix compiling warning issue
---
drivers/usb/typec/Kconfig | 11 +
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/anx7411.c | 1596 +++++++++++++++++++++++++++++++++++
3 files changed, 1608 insertions(+)
create mode 100644 drivers/usb/typec/anx7411.c

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index ba24847fb245..5defdfead653 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"

source "drivers/usb/typec/tipd/Kconfig"

+config TYPEC_ANX7411
+ tristate "Analogix ANX7411 Type-C DRP Port controller driver"
+ depends on I2C
+ depends on USB_ROLE_SWITCH
+ help
+ Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
+ controller driver.
+
+ If you choose to build this driver as a dynamically linked module, the
+ module will be called anx7411.ko.
+
config TYPEC_RT1719
tristate "Richtek RT1719 Sink Only Type-C controller driver"
depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 2f174cd3e5df..dac5c11a3234 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC) += altmodes/
obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
+obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
new file mode 100644
index 000000000000..b990376991f8
--- /dev/null
+++ b/drivers/usb/typec/anx7411.c
@@ -0,0 +1,1596 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Driver for Analogix ANX7411 USB Type-C and PD controller
+ *
+ * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define TCPC_ADDRESS1 0x58
+#define TCPC_ADDRESS2 0x56
+#define TCPC_ADDRESS3 0x54
+#define TCPC_ADDRESS4 0x52
+#define SPI_ADDRESS1 0x7e
+#define SPI_ADDRESS2 0x6e
+#define SPI_ADDRESS3 0x64
+#define SPI_ADDRESS4 0x62
+
+struct anx7411_i2c_select {
+ u8 tcpc_address;
+ u8 spi_address;
+};
+
+#define VID_ANALOGIX 0x1F29
+#define PID_ANALOGIX 0x7411
+
+/* TCPC register define */
+
+#define ANALOG_CTRL_10 0xAA
+
+#define STATUS_LEN 2
+#define ALERT_0 0xCB
+#define RECEIVED_MSG BIT(7)
+#define SOFTWARE_INT BIT(6)
+#define MSG_LEN 32
+#define HEADER_LEN 2
+#define MSG_HEADER 0x00
+#define MSG_TYPE 0x01
+#define MSG_RAWDATA 0x02
+#define MSG_LEN_MASK 0x1F
+
+#define ALERT_1 0xCC
+#define INTP_POW_ON BIT(7)
+#define INTP_POW_OFF BIT(6)
+
+#define VBUS_THRESHOLD_H 0xDD
+#define VBUS_THRESHOLD_L 0xDE
+
+#define FW_CTRL_0 0xF0
+#define UNSTRUCT_VDM_EN BIT(0)
+#define DELAY_200MS BIT(1)
+#define VSAFE0 0
+#define VSAFE1 BIT(2)
+#define VSAFE2 BIT(3)
+#define VSAFE3 (BIT(2) | BIT(3))
+#define FRS_EN BIT(7)
+
+#define FW_PARAM 0xF1
+#define DONGLE_IOP BIT(0)
+
+#define FW_CTRL_2 0xF7
+#define SINK_CTRL_DIS_FLAG BIT(5)
+
+/* SPI register define */
+#define OCM_CTRL_0 0x6E
+#define OCM_RESET BIT(6)
+
+#define MAX_VOLTAGE 0xAC
+#define MAX_POWER 0xAD
+#define MIN_POWER 0xAE
+
+#define REQUEST_VOLTAGE 0xAF
+#define VOLTAGE_UNIT 100 /* mV per unit */
+
+#define REQUEST_CURRENT 0xB1
+#define CURRENT_UNIT 50 /* mA per unit */
+
+#define CMD_SEND_BUF 0xC0
+#define CMD_RECV_BUF 0xE0
+
+#define REQ_VOL_20V_IN_100MV 0xC8
+#define REQ_CUR_2_25A_IN_50MA 0x2D
+#define REQ_CUR_3_25A_IN_50MA 0x41
+
+#define DEF_5V 5000
+#define DEF_1_5A 1500
+
+#define LOBYTE(w) ((u8)((w) & 0xFF))
+#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF))
+
+enum anx7411_typec_message_type {
+ TYPE_SRC_CAP = 0x00,
+ TYPE_SNK_CAP = 0x01,
+ TYPE_SNK_IDENTITY = 0x02,
+ TYPE_SVID = 0x03,
+ TYPE_SET_SNK_DP_CAP = 0x08,
+ TYPE_PSWAP_REQ = 0x10,
+ TYPE_DSWAP_REQ = 0x11,
+ TYPE_VDM = 0x14,
+ TYPE_OBJ_REQ = 0x16,
+ TYPE_DP_ALT_ENTER = 0x19,
+ TYPE_DP_DISCOVER_MODES_INFO = 0x27,
+ TYPE_GET_DP_CONFIG = 0x29,
+ TYPE_DP_CONFIGURE = 0x2A,
+ TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
+ TYPE_GET_DP_ALT_ENTER = 0x2F,
+};
+
+#define FW_CTRL_1 0xB2
+#define AUTO_PD_EN BIT(1)
+#define TRYSRC_EN BIT(2)
+#define TRYSNK_EN BIT(3)
+#define FORCE_SEND_RDO BIT(6)
+
+#define FW_VER 0xB4
+#define FW_SUBVER 0xB5
+
+#define INT_MASK 0xB6
+#define INT_STS 0xB7
+#define OCM_BOOT_UP BIT(0)
+#define OC_OV_EVENT BIT(1)
+#define VCONN_CHANGE BIT(2)
+#define VBUS_CHANGE BIT(3)
+#define CC_STATUS_CHANGE BIT(4)
+#define DATA_ROLE_CHANGE BIT(5)
+#define PR_CONSUMER_GOT_POWER BIT(6)
+#define HPD_STATUS_CHANGE BIT(7)
+
+#define SYSTEM_STSTUS 0xB8
+/* 0: SINK off; 1: SINK on */
+#define SINK_STATUS BIT(1)
+/* 0: VCONN off; 1: VCONN on*/
+#define VCONN_STATUS BIT(2)
+/* 0: vbus off; 1: vbus on*/
+#define VBUS_STATUS BIT(3)
+/* 1: host; 0:device*/
+#define DATA_ROLE BIT(5)
+/* 0: Chunking; 1: Unchunked*/
+#define SUPPORT_UNCHUNKING BIT(6)
+/* 0: HPD low; 1: HPD high*/
+#define HPD_STATUS BIT(7)
+
+#define DATA_DFP 1
+#define DATA_UFP 2
+#define POWER_SOURCE 1
+#define POWER_SINK 2
+
+#define CC_STATUS 0xB9
+#define CC1_RD BIT(0)
+#define CC2_RD BIT(4)
+#define CC1_RA BIT(1)
+#define CC2_RA BIT(5)
+#define CC1_RD BIT(0)
+#define CC1_RP(cc) (((cc) >> 2) & 0x03)
+#define CC2_RP(cc) (((cc) >> 6) & 0x03)
+
+#define PD_REV_INIT 0xBA
+
+#define PD_EXT_MSG_CTRL 0xBB
+#define SRC_CAP_EXT_REPLY BIT(0)
+#define MANUFACTURER_INFO_REPLY BIT(1)
+#define BATTERY_STS_REPLY BIT(2)
+#define BATTERY_CAP_REPLY BIT(3)
+#define ALERT_REPLY BIT(4)
+#define STATUS_REPLY BIT(5)
+#define PPS_STATUS_REPLY BIT(6)
+#define SNK_CAP_EXT_REPLY BIT(7)
+
+#define NO_CONNECT 0x00
+#define USB3_1_CONNECTED 0x01
+#define DP_ALT_4LANES 0x02
+#define USB3_1_DP_2LANES 0x03
+#define CC1_CONNECTED 0x01
+#define CC2_CONNECTED 0x02
+#define SELECT_PIN_ASSIGMENT_C 0x04
+#define SELECT_PIN_ASSIGMENT_D 0x08
+#define SELECT_PIN_ASSIGMENT_E 0x10
+#define SELECT_PIN_ASSIGMENT_U 0x00
+#define REDRIVER_ADDRESS 0x20
+#define REDRIVER_OFFSET 0x00
+
+#define DP_SVID 0xFF01
+#define VDM_ACK 0x40
+#define VDM_CMD_RES 0x00
+#define VDM_CMD_DIS_ID 0x01
+#define VDM_CMD_DIS_SVID 0x02
+#define VDM_CMD_DIS_MOD 0x03
+#define VDM_CMD_ENTER_MODE 0x04
+#define VDM_CMD_EXIT_MODE 0x05
+#define VDM_CMD_ATTENTION 0x06
+#define VDM_CMD_GET_STS 0x10
+#define VDM_CMD_AND_ACK_MASK 0x5F
+
+#define MAX_ALTMODE 2
+
+#define HAS_SOURCE_CAP BIT(0)
+#define HAS_SINK_CAP BIT(1)
+#define HAS_SINK_WATT BIT(2)
+
+enum anx7411_psy_state {
+ /* copy from drivers/usb/typec/tcpm */
+ ANX7411_PSY_OFFLINE = 0,
+ ANX7411_PSY_FIXED_ONLINE,
+
+ /* private */
+ /* PD keep in, but disconnct power to bq25700,
+ * this state can be active when higher capacity adapter plug in,
+ * and change to ONLINE state when higher capacity adapter plug out
+ */
+ ANX7411_PSY_HANG = 0xff,
+};
+
+struct typec_params {
+ int request_current; /* ma */
+ int request_voltage; /* mv */
+ int cc_connect;
+ int cc_orientation_valid;
+ int cc_status;
+ int data_role;
+ int power_role;
+ int vconn_role;
+ int dp_altmode_enter;
+ int cust_altmode_enter;
+ struct usb_role_switch *role_sw;
+ struct typec_port *port;
+ struct typec_partner *partner;
+ struct typec_mux_dev *typec_mux;
+ struct typec_switch_dev *typec_switch;
+ struct typec_altmode *amode[MAX_ALTMODE];
+ struct typec_altmode *port_amode[MAX_ALTMODE];
+ struct typec_displayport_data data;
+ int pin_assignment;
+ struct typec_capability caps;
+ u32 src_pdo[PDO_MAX_OBJECTS];
+ u32 sink_pdo[PDO_MAX_OBJECTS];
+ u8 caps_flags;
+ u8 src_pdo_nr;
+ u8 sink_pdo_nr;
+ u8 sink_watt;
+ u8 sink_voltage;
+};
+
+#define MAX_BUF_LEN 30
+struct fw_msg {
+ u8 msg_len;
+ u8 msg_type;
+ u8 buf[MAX_BUF_LEN];
+} __packed;
+
+struct anx7411_data {
+ int fw_version;
+ int fw_subversion;
+ struct i2c_client *tcpc_client;
+ struct i2c_client *spi_client;
+ struct fw_msg send_msg;
+ struct fw_msg recv_msg;
+ struct gpio_desc *intp_gpiod;
+ struct fwnode_handle *connector_fwnode;
+ struct typec_params typec;
+ int intp_irq;
+ struct work_struct work;
+ struct workqueue_struct *workqueue;
+ /* Lock for interrupt work queue */
+ struct mutex lock;
+
+ enum anx7411_psy_state psy_online;
+ enum power_supply_usb_type usb_type;
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ struct device *dev;
+};
+
+static u8 snk_identity[] = {
+ LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */
+ 0x00, 0x00, 0x00, 0x00, /* snk_cert */
+ 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */
+};
+
+static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
+
+static int anx7411_reg_read(struct i2c_client *client,
+ u8 reg_addr)
+{
+ return i2c_smbus_read_byte_data(client, reg_addr);
+}
+
+static int anx7411_reg_block_read(struct i2c_client *client,
+ u8 reg_addr, u8 len, u8 *buf)
+{
+ return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static int anx7411_reg_write(struct i2c_client *client,
+ u8 reg_addr, u8 reg_val)
+{
+ return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
+}
+
+static int anx7411_reg_block_write(struct i2c_client *client,
+ u8 reg_addr, u8 len, u8 *buf)
+{
+ return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static struct anx7411_i2c_select anx7411_i2c_addr[] = {
+ {TCPC_ADDRESS1, SPI_ADDRESS1},
+ {TCPC_ADDRESS2, SPI_ADDRESS2},
+ {TCPC_ADDRESS3, SPI_ADDRESS3},
+ {TCPC_ADDRESS4, SPI_ADDRESS4},
+};
+
+static int anx7411_detect_power_mode(struct anx7411_data *ctx)
+{
+ int ret;
+ int mode;
+
+ ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
+
+ ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
+
+ if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
+ ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+ power_supply_changed(ctx->psy);
+ }
+
+ if (!ctx->typec.cc_orientation_valid)
+ return 0;
+
+ if (ctx->typec.cc_connect == CC1_CONNECTED)
+ mode = CC1_RP(ctx->typec.cc_status);
+ else
+ mode = CC2_RP(ctx->typec.cc_status);
+ if (mode) {
+ typec_set_pwr_opmode(ctx->typec.port, mode - 1);
+ return 0;
+ }
+
+ typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
+
+ return 0;
+}
+
+static int anx7411_register_partner(struct anx7411_data *ctx,
+ int pd, int accessory)
+{
+ struct typec_partner_desc desc;
+
+ if (ctx->typec.partner)
+ return 0;
+
+ desc.usb_pd = pd;
+ desc.accessory = accessory;
+ desc.identity = NULL;
+ ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
+ if (IS_ERR(ctx->typec.partner)) {
+ ctx->typec.partner = NULL;
+ return PTR_ERR(ctx->typec.partner);
+ }
+
+ return 0;
+}
+
+static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ int ret;
+ int cc1_rd, cc2_rd;
+ int cc1_ra, cc2_ra;
+ int cc1_rp, cc2_rp;
+
+ ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.cc_status = ret;
+
+ cc1_rd = ret & CC1_RD ? 1 : 0;
+ cc2_rd = ret & CC2_RD ? 1 : 0;
+ cc1_ra = ret & CC1_RA ? 1 : 0;
+ cc2_ra = ret & CC2_RA ? 1 : 0;
+ cc1_rp = CC1_RP(ret);
+ cc2_rp = CC2_RP(ret);
+
+ /* Debug cable, nothing to do */
+ if (cc1_rd && cc2_rd) {
+ ctx->typec.cc_orientation_valid = 0;
+ return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
+ }
+
+ if (cc1_ra && cc2_ra) {
+ ctx->typec.cc_orientation_valid = 0;
+ return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
+ }
+
+ ctx->typec.cc_orientation_valid = 1;
+
+ ret = anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
+ if (ret) {
+ dev_err(dev, "register partner\n");
+ return ret;
+ }
+
+ if (cc1_rd || cc1_rp) {
+ typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL);
+ ctx->typec.cc_connect = CC1_CONNECTED;
+ }
+
+ if (cc2_rd || cc2_rp) {
+ typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE);
+ ctx->typec.cc_connect = CC2_CONNECTED;
+ }
+
+ return 0;
+}
+
+static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
+{
+ int mode = TYPEC_STATE_SAFE;
+
+ switch (pin_assignment) {
+ case SELECT_PIN_ASSIGMENT_U:
+ /* default 4 line USB 3.1 */
+ mode = TYPEC_STATE_MODAL;
+ break;
+ case SELECT_PIN_ASSIGMENT_C:
+ case SELECT_PIN_ASSIGMENT_E:
+ /* 4 line DP */
+ mode = TYPEC_STATE_SAFE;
+ break;
+ case SELECT_PIN_ASSIGMENT_D:
+ /* 2 line DP, 2 line USB */
+ mode = TYPEC_MODE_USB3;
+ break;
+ default:
+ mode = TYPEC_STATE_SAFE;
+ break;
+ }
+
+ ctx->typec.pin_assignment = pin_assignment;
+
+ return typec_set_mode(ctx->typec.port, mode);
+}
+
+static int anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
+{
+ if (!ctx->typec.role_sw)
+ return 0;
+
+ return usb_role_switch_set_role(ctx->typec.role_sw, role);
+}
+
+static int anx7411_data_role_detect(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+ ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
+
+ typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
+
+ typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
+
+ if (ctx->typec.data_role == TYPEC_HOST)
+ return anx7411_set_usb_role(ctx, USB_ROLE_HOST);
+
+ return anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
+}
+
+static int anx7411_power_role_detect(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+
+ if (ctx->typec.power_role == TYPEC_SOURCE) {
+ ctx->typec.request_current = DEF_1_5A;
+ ctx->typec.request_voltage = DEF_5V;
+ }
+
+ typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
+
+ return 0;
+}
+
+static int anx7411_cc_status_detect(struct anx7411_data *ctx)
+{
+ anx7411_detect_cc_orientation(ctx);
+ anx7411_detect_power_mode(ctx);
+
+ return 0;
+}
+
+static void anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
+{
+ int i;
+
+ ctx->typec.dp_altmode_enter = 0;
+ ctx->typec.cust_altmode_enter = 0;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (ctx->typec.amode[i]) {
+ typec_unregister_altmode(ctx->typec.amode[i]);
+ ctx->typec.amode[i] = NULL;
+ }
+
+ ctx->typec.pin_assignment = 0;
+}
+
+static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
+ int svid, int vdo)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct typec_altmode_desc desc;
+ int i;
+
+ desc.svid = svid;
+ desc.vdo = vdo;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (!ctx->typec.amode[i])
+ break;
+
+ desc.mode = i + 1; /* start with 1 */
+
+ if (i >= MAX_ALTMODE) {
+ dev_err(dev, "no altmode space for registering\n");
+ return -ENOMEM;
+ }
+
+ ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
+ &desc);
+ if (IS_ERR(ctx->typec.amode[i])) {
+ dev_err(dev, "failed to register altmode\n");
+ ctx->typec.amode[i] = NULL;
+ return PTR_ERR(ctx->typec.amode);
+ }
+
+ return 0;
+}
+
+static void anx7411_unregister_partner(struct anx7411_data *ctx)
+{
+ if (ctx->typec.partner) {
+ typec_unregister_partner(ctx->typec.partner);
+ ctx->typec.partner = NULL;
+ }
+}
+
+static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
+{
+ int i;
+
+ if (svid == DP_SVID)
+ ctx->typec.dp_altmode_enter = 1;
+ else
+ ctx->typec.cust_altmode_enter = 1;
+
+ for (i = 0; i < MAX_ALTMODE; i++) {
+ if (!ctx->typec.amode[i])
+ continue;
+
+ if (ctx->typec.amode[i]->svid == svid) {
+ typec_altmode_update_active(ctx->typec.amode[i], true);
+ typec_altmode_notify(ctx->typec.amode[i],
+ ctx->typec.pin_assignment,
+ &ctx->typec.data);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int anx7411_register_altmode(struct anx7411_data *ctx,
+ bool dp_altmode, u8 *buf)
+{
+ int ret;
+ int svid;
+ int mid;
+
+ if (!ctx->typec.partner)
+ return 0;
+
+ svid = DP_SVID;
+ if (dp_altmode) {
+ mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+
+ return anx7411_typec_register_altmode(ctx, svid, mid);
+ }
+
+ svid = (buf[3] << 8) | buf[2];
+ if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE))
+ return anx7411_update_altmode(ctx, svid);
+
+ if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD))
+ return 0;
+
+ mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
+
+ ret = anx7411_typec_register_altmode(ctx, svid, mid);
+ if (ctx->typec.cust_altmode_enter)
+ ret |= anx7411_update_altmode(ctx, svid);
+
+ return ret;
+}
+
+static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ u8 cur_50ma, vol_100mv;
+
+ switch (type) {
+ case TYPE_SRC_CAP:
+ cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+ vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+
+ ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
+ ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
+
+ ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+ power_supply_changed(ctx->psy);
+ break;
+ case TYPE_SNK_CAP:
+ break;
+ case TYPE_SVID:
+ break;
+ case TYPE_SNK_IDENTITY:
+ break;
+ case TYPE_GET_DP_ALT_ENTER:
+ /* DP alt mode enter success */
+ if (buf[0])
+ anx7411_update_altmode(ctx, DP_SVID);
+ break;
+ case TYPE_DP_ALT_ENTER:
+ /* Update DP altmode */
+ anx7411_update_altmode(ctx, DP_SVID);
+ break;
+ case TYPE_OBJ_REQ:
+ anx7411_detect_power_mode(ctx);
+ break;
+ case TYPE_DP_CONFIGURE:
+ anx7411_set_mux(ctx, buf[1]);
+ break;
+ case TYPE_DP_DISCOVER_MODES_INFO:
+ /* Make sure discover modes valid */
+ if (buf[0] | buf[1])
+ /* Register DP Altmode */
+ anx7411_register_altmode(ctx, 1, buf);
+ break;
+ case TYPE_VDM:
+ /* Register other altmode */
+ anx7411_register_altmode(ctx, 0, buf);
+ break;
+ default:
+ dev_err(dev, "ignore message(0x%.02x).\n", type);
+ break;
+ }
+
+ return 0;
+}
+
+static u8 checksum(struct device *dev, u8 *buf, u8 len)
+{
+ u8 ret = 0;
+ u8 i;
+
+ for (i = 0; i < len; i++)
+ ret += buf[i];
+
+ return ret;
+}
+
+static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
+{
+ return anx7411_reg_read(client, CMD_SEND_BUF);
+}
+
+static int anx7411_wait_msg_empty(struct i2c_client *client)
+{
+ int val;
+
+ return readx_poll_timeout(anx7411_read_msg_ctrl_status,
+ client, val, (val < 0) || (val == 0),
+ 2000, 2000 * 150);
+}
+
+static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct fw_msg *msg = &ctx->send_msg;
+ u8 crc;
+ int ret;
+
+ size = min_t(u8, size, (u8)MAX_BUF_LEN);
+ memcpy(msg->buf, buf, size);
+ msg->msg_type = type;
+ /* msg len equals buffer length + msg_type */
+ msg->msg_len = size + 1;
+
+ /* Do CRC check for all buffer data and msg_len and msg_type */
+ crc = checksum(dev, (u8 *)msg, size + HEADER_LEN);
+ msg->buf[size] = 0 - crc;
+
+ ret = anx7411_wait_msg_empty(ctx->spi_client);
+ if (ret)
+ return ret;
+
+ ret = anx7411_reg_block_write(ctx->spi_client,
+ CMD_SEND_BUF + 1, size + HEADER_LEN,
+ &msg->msg_type);
+ ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
+ msg->msg_len);
+ return ret;
+}
+
+static int anx7411_process_cmd(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct fw_msg *msg = &ctx->recv_msg;
+ u8 len;
+ u8 crc;
+ int ret;
+
+ /* Read message from firmware */
+ ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF,
+ MSG_LEN, (u8 *)msg);
+ if (ret < 0)
+ return 0;
+
+ if (!msg->msg_len)
+ return 0;
+
+ ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
+ if (ret)
+ return ret;
+
+ len = msg->msg_len & MSG_LEN_MASK;
+ crc = checksum(dev, (u8 *)msg, len + HEADER_LEN);
+ if (crc) {
+ dev_err(dev, "message error crc(0x%.02x)\n", crc);
+ return -ERANGE;
+ }
+
+ return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1);
+}
+
+static void anx7411_translate_payload(struct device *dev, __le32 *payload,
+ u32 *pdo, int nr, const char *type)
+{
+ int i;
+
+ if (nr > PDO_MAX_OBJECTS) {
+ dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
+ nr, PDO_MAX_OBJECTS);
+
+ return;
+ }
+
+ for (i = 0; i < nr; i++)
+ payload[i] = cpu_to_le32(pdo[i]);
+}
+
+static int anx7411_config(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct typec_params *typecp = &ctx->typec;
+ __le32 payload[PDO_MAX_OBJECTS];
+ int ret;
+
+ /* Config PD FW work under PD 2.0 */
+ ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
+ ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
+ UNSTRUCT_VDM_EN | DELAY_200MS |
+ VSAFE1 | FRS_EN);
+ ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
+ AUTO_PD_EN | FORCE_SEND_RDO);
+
+ /* Set VBUS current threshold */
+ ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
+ ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
+
+ /* Fix dongle compatible issue */
+ ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
+ anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
+ DONGLE_IOP);
+ ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
+
+ ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
+ if (ret)
+ return ret;
+
+ if (typecp->caps_flags & HAS_SOURCE_CAP) {
+ anx7411_translate_payload(dev, payload, typecp->src_pdo,
+ typecp->src_pdo_nr, "source");
+ anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
+ typecp->src_pdo_nr * 4);
+ anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
+ sizeof(snk_identity));
+ anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
+ sizeof(dp_caps));
+ }
+
+ if (typecp->caps_flags & HAS_SINK_CAP) {
+ anx7411_translate_payload(dev, payload, typecp->sink_pdo,
+ typecp->sink_pdo_nr, "sink");
+ anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
+ typecp->sink_pdo_nr * 4);
+ }
+
+ if (typecp->caps_flags & HAS_SINK_WATT) {
+ if (typecp->sink_watt) {
+ ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER,
+ typecp->sink_watt);
+ /* Set min power to 1W */
+ ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
+ }
+
+ if (typecp->sink_voltage)
+ ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
+ typecp->sink_voltage);
+ if (ret)
+ return ret;
+ }
+
+ if (!typecp->caps_flags)
+ usleep_range(5000, 6000);
+
+ ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
+ ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER);
+
+ return 0;
+}
+
+static void anx7411_chip_standby(struct anx7411_data *ctx)
+{
+ int ret;
+ u8 cc1, cc2;
+ struct device *dev = &ctx->spi_client->dev;
+
+ ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
+ anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
+ OCM_RESET);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
+ /* Set TCPC to RD and DRP enable */
+ cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
+ cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
+ ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL,
+ TCPC_ROLE_CTRL_DRP | cc1 | cc2);
+
+ /* Send DRP toggle command */
+ ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND,
+ TCPC_CMD_LOOK4CONNECTION);
+
+ /* Send TCPC enter standby command */
+ ret |= anx7411_reg_write(ctx->tcpc_client,
+ TCPC_COMMAND, TCPC_CMD_I2C_IDLE);
+ if (ret)
+ dev_err(dev, "Chip standby failed\n");
+}
+
+static void anx7411_work_func(struct work_struct *work)
+{
+ int ret;
+ u8 buf[STATUS_LEN];
+ u8 int_change; /* Interrupt change */
+ u8 int_status; /* Firmware status update */
+ u8 alert0, alert1; /* Interrupt alert source */
+ struct anx7411_data *ctx = container_of(work, struct anx7411_data, work);
+ struct device *dev = &ctx->spi_client->dev;
+
+ mutex_lock(&ctx->lock);
+
+ /* Read interrupt change status */
+ ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf);
+ if (ret < 0) {
+ /* Power standby mode, just return */
+ goto unlock;
+ }
+ int_change = buf[0];
+ int_status = buf[1];
+
+ /* Read alert register */
+ ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf);
+ if (ret < 0)
+ goto unlock;
+
+ alert0 = buf[0];
+ alert1 = buf[1];
+
+ /* Clear interrupt and alert status */
+ ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
+ if (ret)
+ goto unlock;
+
+ if (alert1 & INTP_POW_OFF) {
+ anx7411_partner_unregister_altmode(ctx);
+ if (anx7411_set_usb_role(ctx, USB_ROLE_NONE))
+ dev_err(dev, "Set usb role\n");
+ anx7411_unregister_partner(ctx);
+ ctx->psy_online = ANX7411_PSY_OFFLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+ ctx->typec.request_voltage = 0;
+ ctx->typec.request_current = 0;
+ power_supply_changed(ctx->psy);
+ anx7411_chip_standby(ctx);
+ goto unlock;
+ }
+
+ if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
+ if (anx7411_config(ctx))
+ dev_err(dev, "Config failed\n");
+ if (anx7411_data_role_detect(ctx))
+ dev_err(dev, "set PD data role\n");
+ if (anx7411_power_role_detect(ctx))
+ dev_err(dev, "set PD power role\n");
+ anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+ }
+
+ if (alert0 & RECEIVED_MSG)
+ anx7411_process_cmd(ctx);
+
+ ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+ if (ctx->typec.data_role != ret)
+ if (anx7411_data_role_detect(ctx))
+ dev_err(dev, "set PD data role\n");
+
+ ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+ if (ctx->typec.power_role != ret)
+ if (anx7411_power_role_detect(ctx))
+ dev_err(dev, "set PD power role\n");
+
+ if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
+ anx7411_cc_status_detect(ctx);
+
+unlock:
+ mutex_unlock(&ctx->lock);
+}
+
+static irqreturn_t anx7411_intr_isr(int irq, void *data)
+{
+ struct anx7411_data *ctx = (struct anx7411_data *)data;
+
+ queue_work(ctx->workqueue, &ctx->work);
+
+ return IRQ_HANDLED;
+}
+
+static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
+ struct i2c_client *client)
+{
+ int i;
+ u8 spi_addr;
+
+ for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
+ if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
+ spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
+ ctx->spi_client = i2c_new_dummy_device(client->adapter,
+ spi_addr);
+ if (ctx->spi_client)
+ return 0;
+ }
+ }
+
+ dev_err(&client->dev, "unable to get SPI slave\n");
+ return -ENOMEM;
+}
+
+static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
+{
+ int i;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (adev[i]) {
+ typec_unregister_altmode(adev[i]);
+ adev[i] = NULL;
+ }
+}
+
+static int anx7411_usb_mux_set(struct typec_mux_dev *mux,
+ struct typec_mux_state *state)
+{
+ struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
+ struct device *dev = &ctx->spi_client->dev;
+ int has_dp;
+
+ has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
+ state->alt->mode == USB_TYPEC_DP_MODE);
+ if (!has_dp)
+ dev_err(dev, "dp altmode not register\n");
+
+ return 0;
+}
+
+static int anx7411_usb_set_orientation(struct typec_switch_dev *sw,
+ enum typec_orientation orientation)
+{
+ /* No need set */
+
+ return 0;
+}
+
+static int anx7411_register_switch(struct anx7411_data *ctx,
+ struct device *dev,
+ struct fwnode_handle *fwnode)
+{
+ struct typec_switch_desc sw_desc = { };
+
+ sw_desc.fwnode = fwnode;
+ sw_desc.drvdata = ctx;
+ sw_desc.name = fwnode_get_name(fwnode);
+ sw_desc.set = anx7411_usb_set_orientation;
+
+ ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
+ if (IS_ERR(ctx->typec.typec_switch)) {
+ dev_err(dev, "switch register failed\n");
+ return PTR_ERR(ctx->typec.typec_switch);
+ }
+
+ return 0;
+}
+
+static int anx7411_register_mux(struct anx7411_data *ctx,
+ struct device *dev,
+ struct fwnode_handle *fwnode)
+{
+ struct typec_mux_desc mux_desc = { };
+
+ mux_desc.fwnode = fwnode;
+ mux_desc.drvdata = ctx;
+ mux_desc.name = fwnode_get_name(fwnode);
+ mux_desc.set = anx7411_usb_mux_set;
+
+ ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
+ if (IS_ERR(ctx->typec.typec_mux)) {
+ dev_err(dev, "mux register failed\n");
+ return PTR_ERR(ctx->typec.typec_mux);
+ }
+
+ return 0;
+}
+
+static void anx7411_unregister_mux(struct anx7411_data *ctx)
+{
+ if (ctx->typec.typec_mux) {
+ typec_mux_unregister(ctx->typec.typec_mux);
+ ctx->typec.typec_mux = NULL;
+ }
+}
+
+static void anx7411_unregister_switch(struct anx7411_data *ctx)
+{
+ if (ctx->typec.typec_switch) {
+ typec_switch_unregister(ctx->typec.typec_switch);
+ ctx->typec.typec_switch = NULL;
+ }
+}
+
+static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
+ struct device *dev)
+{
+ int ret;
+ struct device_node *node;
+
+ node = of_find_node_by_name(dev->of_node, "orientation_switch");
+ if (!node)
+ return 0;
+
+ ret = anx7411_register_switch(ctx, dev, &node->fwnode);
+ if (ret) {
+ dev_err(dev, "failed register switch");
+ return ret;
+ }
+
+ node = of_find_node_by_name(dev->of_node, "mode_switch");
+ if (!node) {
+ dev_err(dev, "no typec mux exist");
+ ret = -ENODEV;
+ goto unregister_switch;
+ }
+
+ ret = anx7411_register_mux(ctx, dev, &node->fwnode);
+ if (ret) {
+ dev_err(dev, "failed register mode switch");
+ ret = -ENODEV;
+ goto unregister_switch;
+ }
+
+ return 0;
+
+unregister_switch:
+ anx7411_unregister_switch(ctx);
+
+ return ret;
+}
+
+static int anx7411_typec_port_probe(struct anx7411_data *ctx,
+ struct device *dev)
+{
+ struct typec_capability *cap = &ctx->typec.caps;
+ struct typec_params *typecp = &ctx->typec;
+ struct fwnode_handle *fwnode;
+ const char *buf;
+ int ret, i;
+
+ fwnode = device_get_named_child_node(dev, "connector");
+ if (!fwnode)
+ return -EINVAL;
+
+ ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+ if (ret) {
+ dev_err(dev, "power-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_port_power_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->type = ret;
+
+ ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+ if (ret) {
+ dev_err(dev, "data-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_port_data_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->data = ret;
+
+ ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
+ if (ret) {
+ dev_err(dev, "try-power-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_power_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->prefer_role = ret;
+
+ /* Get source pdos */
+ ret = fwnode_property_count_u32(fwnode, "source-pdos");
+ if (ret > 0) {
+ typecp->src_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS);
+ ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+ typecp->src_pdo,
+ typecp->src_pdo_nr);
+ if (ret < 0) {
+ dev_err(dev, "source cap validate failed: %d\n", ret);
+ return -EINVAL;
+ }
+
+ typecp->caps_flags |= HAS_SOURCE_CAP;
+ }
+
+ ret = fwnode_property_count_u32(fwnode, "sink-pdos");
+ if (ret > 0) {
+ typecp->sink_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS);
+ ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+ typecp->sink_pdo,
+ typecp->sink_pdo_nr);
+ if (ret < 0) {
+ dev_err(dev, "sink cap validate failed: %d\n", ret);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < typecp->sink_pdo_nr; i++) {
+ ret = 0;
+ switch (pdo_type(typecp->sink_pdo[i])) {
+ case PDO_TYPE_FIXED:
+ ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
+ break;
+ case PDO_TYPE_BATT:
+ case PDO_TYPE_VAR:
+ ret = pdo_max_voltage(typecp->sink_pdo[i]);
+ break;
+ case PDO_TYPE_APDO:
+ default:
+ ret = 0;
+ break;
+ }
+
+ /* 100mv per unit */
+ typecp->sink_voltage = max(5000, ret) / 100;
+ }
+
+ typecp->caps_flags |= HAS_SINK_CAP;
+ }
+
+ if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
+ typecp->sink_watt = ret / 500000; /* 500mw per unit */
+ typecp->caps_flags |= HAS_SINK_WATT;
+ }
+
+ cap->fwnode = fwnode;
+
+ ctx->typec.role_sw = usb_role_switch_get(dev);
+ if (IS_ERR(ctx->typec.role_sw)) {
+ dev_err(dev, "USB role switch not found.\n");
+ ctx->typec.role_sw = NULL;
+ }
+
+ ctx->typec.port = typec_register_port(dev, cap);
+ if (IS_ERR(ctx->typec.port)) {
+ ret = PTR_ERR(ctx->typec.port);
+ ctx->typec.port = NULL;
+ dev_err(dev, "Failed to register type c port %d\n", ret);
+ return ret;
+ }
+
+ typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
+ ctx->typec.port_amode,
+ MAX_ALTMODE);
+ return 0;
+}
+
+static int anx7411_typec_check_connection(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, FW_VER);
+ if (ret < 0)
+ return 0; /* No device attached in typec port */
+
+ /* Clear interrupt and alert status */
+ ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
+ if (ret)
+ return ret;
+
+ ret = anx7411_cc_status_detect(ctx);
+ ret |= anx7411_power_role_detect(ctx);
+ ret |= anx7411_data_role_detect(ctx);
+ ret |= anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+ if (ret)
+ return ret;
+
+ ret = anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
+ ret |= anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
+
+ return ret;
+}
+
+static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
+{
+ struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+ mutex_lock(&ctx->lock);
+
+ anx7411_partner_unregister_altmode(ctx);
+
+ if (ctx->typec.partner)
+ anx7411_unregister_partner(ctx);
+
+ mutex_unlock(&ctx->lock);
+
+ return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
+{
+ struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+ mutex_lock(&ctx->lock);
+ /* Detect PD connection */
+ if (anx7411_typec_check_connection(ctx))
+ dev_err(dev, "check connection");
+
+ mutex_unlock(&ctx->lock);
+
+ return 0;
+}
+
+static const struct dev_pm_ops anx7411_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
+ anx7411_runtime_pm_resume, NULL)
+};
+
+static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->tcpc_client->dev;
+
+ ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
+ if (!ctx->intp_gpiod) {
+ dev_err(dev, "no interrupt gpio property\n");
+ return;
+ }
+
+ ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
+ if (!ctx->intp_irq)
+ dev_err(dev, "failed to get GPIO IRQ\n");
+}
+
+static enum power_supply_usb_type anx7411_psy_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_C,
+ POWER_SUPPLY_USB_TYPE_PD,
+ POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+static enum power_supply_property anx7411_psy_props[] = {
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int anx7411_psy_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ if (psp == POWER_SUPPLY_PROP_ONLINE)
+ ctx->psy_online = val->intval;
+ else
+ ret = -EINVAL;
+
+ power_supply_changed(ctx->psy);
+ return ret;
+}
+
+static int anx7411_psy_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_ONLINE;
+}
+
+static int anx7411_psy_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ val->intval = ctx->usb_type;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ctx->psy_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = (ctx->psy_online) ?
+ ctx->typec.request_voltage * 1000 : 0;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = (ctx->psy_online) ?
+ ctx->typec.request_current * 1000 : 0;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int anx7411_psy_register(struct anx7411_data *ctx)
+{
+ struct power_supply_desc *psy_desc = &ctx->psy_desc;
+ struct power_supply_config psy_cfg = {};
+ char *psy_name;
+
+ psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s",
+ dev_name(ctx->dev));
+ if (!psy_name)
+ return -ENOMEM;
+
+ psy_desc->name = psy_name;
+ psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ psy_desc->usb_types = anx7411_psy_usb_types;
+ psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
+ psy_desc->properties = anx7411_psy_props,
+ psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
+
+ psy_desc->get_property = anx7411_psy_get_prop,
+ psy_desc->set_property = anx7411_psy_set_prop,
+ psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
+
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+ ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
+
+ if (IS_ERR(ctx->psy))
+ dev_warn(ctx->dev, "unable to register psy\n");
+
+ return PTR_ERR_OR_ZERO(ctx->psy);
+}
+
+static int anx7411_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct anx7411_data *plat;
+ struct device *dev = &client->dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -ENODEV;
+
+ plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+
+ plat->tcpc_client = client;
+ i2c_set_clientdata(client, plat);
+
+ mutex_init(&plat->lock);
+
+ ret = anx7411_register_i2c_dummy_clients(plat, client);
+ if (ret) {
+ dev_err(dev, "fail to reserve I2C bus\n");
+ return ret;
+ }
+
+ ret = anx7411_typec_switch_probe(plat, dev);
+ if (ret) {
+ dev_err(dev, "fail to probe typec switch\n");
+ goto free_i2c_dummy;
+ }
+
+ ret = anx7411_typec_port_probe(plat, dev);
+ if (ret) {
+ dev_err(dev, "fail to probe typec property.\n");
+ ret = -ENODEV;
+ goto free_typec_switch;
+ }
+
+ plat->intp_irq = client->irq;
+ if (!client->irq)
+ anx7411_get_gpio_irq(plat);
+
+ if (!plat->intp_irq) {
+ dev_err(dev, "fail to get interrupt IRQ\n");
+ goto free_typec_port;
+ }
+
+ plat->dev = dev;
+ plat->psy_online = ANX7411_PSY_OFFLINE;
+ if (anx7411_psy_register(plat)) {
+ dev_err(dev, "register psy\n");
+ goto free_typec_port;
+ }
+
+ INIT_WORK(&plat->work, anx7411_work_func);
+ plat->workqueue = alloc_workqueue("anx7411_work",
+ WQ_FREEZABLE |
+ WQ_MEM_RECLAIM,
+ 1);
+ if (!plat->workqueue) {
+ dev_err(dev, "fail to create work queue\n");
+ ret = -ENOMEM;
+ goto free_typec_port;
+ }
+
+ ret = devm_request_threaded_irq(dev, plat->intp_irq,
+ NULL, anx7411_intr_isr,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "anx7411-intp", plat);
+ if (ret) {
+ dev_err(dev, "fail to request irq\n");
+ goto free_wq;
+ }
+
+ if (anx7411_typec_check_connection(plat))
+ dev_err(dev, "check status\n");
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+free_wq:
+ destroy_workqueue(plat->workqueue);
+
+free_typec_port:
+ typec_unregister_port(plat->typec.port);
+ anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+free_typec_switch:
+ anx7411_unregister_switch(plat);
+ anx7411_unregister_mux(plat);
+
+free_i2c_dummy:
+ i2c_unregister_device(plat->spi_client);
+
+ return ret;
+}
+
+static int anx7411_i2c_remove(struct i2c_client *client)
+{
+ struct anx7411_data *plat = i2c_get_clientdata(client);
+
+ anx7411_partner_unregister_altmode(plat);
+ anx7411_unregister_partner(plat);
+
+ if (plat->workqueue)
+ destroy_workqueue(plat->workqueue);
+
+ if (plat->spi_client)
+ i2c_unregister_device(plat->spi_client);
+
+ if (plat->typec.role_sw)
+ usb_role_switch_put(plat->typec.role_sw);
+
+ anx7411_unregister_mux(plat);
+
+ anx7411_unregister_switch(plat);
+
+ if (plat->typec.port)
+ typec_unregister_port(plat->typec.port);
+
+ anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+ return 0;
+}
+
+static const struct i2c_device_id anx7411_id[] = {
+ {"anx7411", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7411_id);
+
+static const struct of_device_id anx_match_table[] = {
+ {.compatible = "analogix,anx7411",},
+ {},
+};
+
+static struct i2c_driver anx7411_driver = {
+ .driver = {
+ .name = "anx7411",
+ .of_match_table = anx_match_table,
+ .pm = &anx7411_pm_ops,
+ },
+ .probe = anx7411_i2c_probe,
+ .remove = anx7411_i2c_remove,
+
+ .id_table = anx7411_id,
+};
+
+module_i2c_driver(anx7411_driver);
+
+MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
+MODULE_AUTHOR("Xin Ji <[email protected]>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.5");
--
2.25.1

2022-07-13 09:46:24

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v18 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

On 13/07/2022 10:41, Xin Ji wrote:
> Add analogix PD chip anx7411 device binding
>
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Xin Ji <[email protected]>
>
> ---
> v17 -> v18 : Change node name from "usb_typec" to "typec"

Node name was anx7411, not usb_typec. What are you changing here? The label?

Best regards,
Krzysztof

2022-07-14 02:32:10

by Xin Ji

[permalink] [raw]
Subject: Re: [PATCH v18 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

On Wed, Jul 13, 2022 at 11:28:16AM +0200, Krzysztof Kozlowski wrote:
> On 13/07/2022 10:41, Xin Ji wrote:
> > Add analogix PD chip anx7411 device binding
> >
> > Reviewed-by: Rob Herring <[email protected]>
> > Signed-off-by: Xin Ji <[email protected]>
> >
> > ---
> > v17 -> v18 : Change node name from "usb_typec" to "typec"
>
> Node name was anx7411, not usb_typec. What are you changing here? The label?
Hi Krzysztof, sorry, I'm confused by your comment, this patch followed the
other dts example in other yaml file and passed the dts checking by
command "make dt_binding_check".

Do you mean change the the node name "anx7411" to "typec"?

Thanks,
Xin
>
> Best regards,
> Krzysztof

2022-07-14 07:05:17

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v18 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

On 14/07/2022 04:02, Xin Ji wrote:
> On Wed, Jul 13, 2022 at 11:28:16AM +0200, Krzysztof Kozlowski wrote:
>> On 13/07/2022 10:41, Xin Ji wrote:
>>> Add analogix PD chip anx7411 device binding
>>>
>>> Reviewed-by: Rob Herring <[email protected]>
>>> Signed-off-by: Xin Ji <[email protected]>
>>>
>>> ---
>>> v17 -> v18 : Change node name from "usb_typec" to "typec"
>>
>> Node name was anx7411, not usb_typec. What are you changing here? The label?
> Hi Krzysztof, sorry, I'm confused by your comment, this patch followed the
> other dts example in other yaml file and passed the dts checking by
> command "make dt_binding_check".
>
> Do you mean change the the node name "anx7411" to "typec"?

Yes, since the some revisions ago I asked to use a generic name for the
node (generic node name).


Best regards,
Krzysztof

2022-07-14 08:13:35

by Xin Ji

[permalink] [raw]
Subject: Re: [PATCH v18 1/2] dt-bindings: usb: Add analogix anx7411 PD binding

On Thu, Jul 14, 2022 at 08:52:09AM +0200, Krzysztof Kozlowski wrote:
> On 14/07/2022 04:02, Xin Ji wrote:
> > On Wed, Jul 13, 2022 at 11:28:16AM +0200, Krzysztof Kozlowski wrote:
> >> On 13/07/2022 10:41, Xin Ji wrote:
> >>> Add analogix PD chip anx7411 device binding
> >>>
> >>> Reviewed-by: Rob Herring <[email protected]>
> >>> Signed-off-by: Xin Ji <[email protected]>
> >>>
> >>> ---
> >>> v17 -> v18 : Change node name from "usb_typec" to "typec"
> >>
> >> Node name was anx7411, not usb_typec. What are you changing here? The label?
> > Hi Krzysztof, sorry, I'm confused by your comment, this patch followed the
> > other dts example in other yaml file and passed the dts checking by
> > command "make dt_binding_check".
> >
> > Do you mean change the the node name "anx7411" to "typec"?
>
> Yes, since the some revisions ago I asked to use a generic name for the
> node (generic node name).
>
>
> Best regards,
> Krzysztof
Hi Krzysztof, OK, I'll change it in next version.
Thanks,
Xin