This is the start of the stable review cycle for the 5.4.207 release.
There are 71 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.207-rc1
Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_handler(): fix use after free of skb
Ilpo Järvinen <[email protected]>
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
Ilpo Järvinen <[email protected]>
serial: stm32: Clear prev values before setting RTS delays
Yi Yang <[email protected]>
serial: 8250: fix return error code in serial8250_request_std_resource()
Chanho Park <[email protected]>
tty: serial: samsung_tty: set dma burst_size to 1
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Fix event pending check
Linyu Yuan <[email protected]>
usb: typec: add missing uevent when partner support PD
Lucien Buchmann <[email protected]>
USB: serial: ftdi_sio: add Belimo device ids
Linus Torvalds <[email protected]>
signal handling: don't use BUG_ON() for debugging
Gabriel Fernandez <[email protected]>
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
Linus Walleij <[email protected]>
soc: ixp4xx/npe: Fix unused match warning
Juergen Gross <[email protected]>
x86: Clear .brk area at early boot
Stafford Horne <[email protected]>
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
Charles Keepax <[email protected]>
ASoC: madera: Fix event generation for rate controls
Charles Keepax <[email protected]>
ASoC: madera: Fix event generation for OUT1 demux
Charles Keepax <[email protected]>
ASoC: cs47l15: Fix event generation for low power mux control
Charles Keepax <[email protected]>
ASoC: wm5110: Fix DRE control
Mark Brown <[email protected]>
ASoC: ops: Fix off by one in range control validation
Jianglei Nie <[email protected]>
net: sfp: fix memory leak in sfp_probe()
Ruozhu Li <[email protected]>
nvme: fix regression when disconnect a recovering ctrl
Michael Walle <[email protected]>
NFC: nxp-nci: don't print header length mismatch on i2c error
Hangyu Hua <[email protected]>
net: tipc: fix possible refcount leak in tipc_sk_create()
Kai-Heng Feng <[email protected]>
platform/x86: hp-wmi: Ignore Sanitization Mode event
Liang He <[email protected]>
cpufreq: pmac32-cpufreq: Fix refcount leak bug
Florian Westphal <[email protected]>
netfilter: br_netfilter: do not skip all hooks with 0 priority
Stephan Gerhold <[email protected]>
virtio_mmio: Restore guest page size on resume
Stephan Gerhold <[email protected]>
virtio_mmio: Add missing PM calls to freeze/restore
Muchun Song <[email protected]>
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
Íñigo Huguet <[email protected]>
sfc: fix kernel panic when creating VF
Andrea Mayer <[email protected]>
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
Andrea Mayer <[email protected]>
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
Andrea Mayer <[email protected]>
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
Íñigo Huguet <[email protected]>
sfc: fix use after free when disabling sriov
Liang He <[email protected]>
net: ftgmac100: Hold reference returned by of_get_child_by_name()
Kuniyuki Iwashima <[email protected]>
ipv4: Fix data-races around sysctl_ip_dynaddr.
Kuniyuki Iwashima <[email protected]>
raw: Fix a data-race around sysctl_raw_l3mdev_accept.
Kuniyuki Iwashima <[email protected]>
icmp: Fix a data-race around sysctl_icmp_ratemask.
Kuniyuki Iwashima <[email protected]>
icmp: Fix a data-race around sysctl_icmp_ratelimit.
Chris Wilson <[email protected]>
drm/i915/gt: Serialize TLB invalidates with GT resets
Michal Suchanek <[email protected]>
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
Ryan Wanner <[email protected]>
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
Kuniyuki Iwashima <[email protected]>
ipv4: Fix a data-race around sysctl_fib_sync_mem.
Kuniyuki Iwashima <[email protected]>
icmp: Fix data-races around sysctl.
Kuniyuki Iwashima <[email protected]>
cipso: Fix data-races around sysctl.
Kuniyuki Iwashima <[email protected]>
net: Fix data-races around sysctl_mem.
Kuniyuki Iwashima <[email protected]>
inetpeer: Fix data-races around sysctl.
Jon Hunter <[email protected]>
net: stmmac: dwc-qos: Disable split header for Tegra194
Francesco Dolcini <[email protected]>
ASoC: sgtl5000: Fix noise on shutdown/remove
Huaxin Lu <[email protected]>
ima: Fix a potential integer overflow in ima_appraise_measurement
Hangyu Hua <[email protected]>
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
Zhen Lei <[email protected]>
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
Ard Biesheuvel <[email protected]>
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
Kris Bahnsen <[email protected]>
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
Baokun Li <[email protected]>
ext4: fix race condition between ext4_write and ext4_convert_inline_data
Daniel Bristot de Oliveira <[email protected]>
sched/rt: Disable RT_RUNTIME_SHARE by default
Xiu Jianfeng <[email protected]>
Revert "evm: Fix memleak in init_desc"
Ryusuke Konishi <[email protected]>
nilfs2: fix incorrect masking of permission flags for symlinks
Dmitry Osipenko <[email protected]>
drm/panfrost: Fix shrinker list corruption by madvise IOCTL
Tejun Heo <[email protected]>
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Felix Fietkau <[email protected]>
wifi: mac80211: fix queue selection for mesh/OCB interfaces
Ard Biesheuvel <[email protected]>
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
Dmitry Osipenko <[email protected]>
ARM: 9213/1: Print message about disabled Spectre workarounds only once
Nicolas Dichtel <[email protected]>
ip: fix dflt addr selection for connected nexthop
Steven Rostedt (Google) <[email protected]>
net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer
Zheng Yejian <[email protected]>
tracing/histograms: Fix memory leak problem
Juergen Gross <[email protected]>
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
Meng Tang <[email protected]>
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
Meng Tang <[email protected]>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
Meng Tang <[email protected]>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
Meng Tang <[email protected]>
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
Meng Tang <[email protected]>
ALSA: hda - Add fixup for Dell Latitidue E5430
-------------
Diffstat:
Documentation/networking/ip-sysctl.txt | 4 +--
Makefile | 4 +--
arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +-
arch/arm/include/asm/mach/map.h | 1 +
arch/arm/include/asm/ptrace.h | 26 +++++++++++++++
arch/arm/mm/alignment.c | 3 ++
arch/arm/mm/mmu.c | 15 ++++++++-
arch/arm/mm/proc-v7-bugs.c | 9 +++---
arch/arm/probes/decode.h | 26 +--------------
arch/x86/kernel/head64.c | 2 ++
drivers/cpufreq/pmac32-cpufreq.c | 4 +++
drivers/gpu/drm/i915/display/intel_dp_mst.c | 1 +
drivers/gpu/drm/i915/gt/intel_gt.c | 15 ++++++++-
drivers/gpu/drm/panfrost/panfrost_drv.c | 4 +--
drivers/irqchip/irq-or1k-pic.c | 1 -
drivers/net/can/m_can/m_can.c | 5 +--
drivers/net/ethernet/faraday/ftgmac100.c | 15 ++++++++-
drivers/net/ethernet/sfc/ef10.c | 3 ++
drivers/net/ethernet/sfc/ef10_sriov.c | 10 ++++--
.../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 1 +
drivers/net/phy/sfp.c | 2 +-
drivers/net/xen-netback/rx.c | 1 +
drivers/nfc/nxp-nci/i2c.c | 8 +++--
drivers/nvme/host/core.c | 2 ++
drivers/nvme/host/nvme.h | 1 +
drivers/nvme/host/rdma.c | 12 +++++--
drivers/nvme/host/tcp.c | 10 ++++--
drivers/platform/x86/hp-wmi.c | 3 ++
drivers/soc/ixp4xx/ixp4xx-npe.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 4 ++-
drivers/tty/serial/amba-pl011.c | 23 ++++++++++++--
drivers/tty/serial/samsung.c | 5 ++-
drivers/tty/serial/stm32-usart.c | 2 ++
drivers/usb/dwc3/gadget.c | 4 ++-
drivers/usb/serial/ftdi_sio.c | 3 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++
drivers/usb/typec/class.c | 1 +
drivers/virtio/virtio_mmio.c | 26 +++++++++++++++
fs/ext4/extents.c | 8 +++--
fs/ext4/inode.c | 9 ------
fs/nilfs2/nilfs.h | 3 ++
include/linux/cgroup-defs.h | 3 +-
include/net/raw.h | 2 +-
include/net/sock.h | 2 +-
include/trace/events/sock.h | 6 ++--
kernel/cgroup/cgroup.c | 37 ++++++++++++++--------
kernel/sched/features.h | 2 +-
kernel/signal.c | 8 ++---
kernel/sysctl.c | 20 ++++++------
kernel/trace/trace_events_hist.c | 2 ++
net/bridge/br_netfilter_hooks.c | 21 ++++++++++--
net/core/filter.c | 1 -
net/ipv4/af_inet.c | 4 +--
net/ipv4/cipso_ipv4.c | 12 ++++---
net/ipv4/fib_semantics.c | 2 +-
net/ipv4/fib_trie.c | 2 +-
net/ipv4/icmp.c | 10 +++---
net/ipv4/inetpeer.c | 12 ++++---
net/ipv6/seg6_iptunnel.c | 5 ++-
net/ipv6/seg6_local.c | 2 --
net/mac80211/wme.c | 4 +--
net/tipc/socket.c | 1 +
security/integrity/evm/evm_crypto.c | 7 ++--
security/integrity/ima/ima_appraise.c | 3 +-
sound/pci/hda/patch_conexant.c | 1 +
sound/pci/hda/patch_realtek.c | 15 +++++++++
sound/soc/codecs/cs47l15.c | 5 ++-
sound/soc/codecs/madera.c | 14 +++++---
sound/soc/codecs/sgtl5000.c | 9 ++++++
sound/soc/codecs/sgtl5000.h | 1 +
sound/soc/codecs/wm5110.c | 8 +++--
sound/soc/soc-ops.c | 4 +--
75 files changed, 365 insertions(+), 152 deletions(-)
From: Gabriel Fernandez <[email protected]>
[ Upstream commit 78ece8cce1ba0c3f3e5a7c6c1b914b3794f04c44 ]
The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index a687c024daa9..0e9e930c60f0 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -515,7 +515,7 @@
compatible = "st,stm32-cec";
reg = <0x40016000 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CEC_K>, <&clk_lse>;
+ clocks = <&rcc CEC_K>, <&rcc CEC>;
clock-names = "cec", "hdmi-cec";
status = "disabled";
};
--
2.35.1
From: Dmitry Osipenko <[email protected]>
commit 9fc33eaaa979d112d10fea729edcd2a2e21aa912 upstream.
Calling madvise IOCTL twice on BO causes memory shrinker list corruption
and crashes kernel because BO is already on the list and it's added to
the list again, while BO should be removed from the list before it's
re-added. Fix it.
Cc: [email protected]
Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support")
Acked-by: Alyssa Rosenzweig <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -428,8 +428,8 @@ static int panfrost_ioctl_madvise(struct
if (args->retained) {
if (args->madv == PANFROST_MADV_DONTNEED)
- list_add_tail(&bo->base.madv_list,
- &pfdev->shrinker_list);
+ list_move_tail(&bo->base.madv_list,
+ &pfdev->shrinker_list);
else if (args->madv == PANFROST_MADV_WILLNEED)
list_del_init(&bo->base.madv_list);
}
From: Michal Suchanek <[email protected]>
[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ]
The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.
Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@ &spi0 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};
--
2.35.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ]
While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/raw.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/raw.h b/include/net/raw.h
index 8ad8df594853..c51a635671a7 100644
--- a/include/net/raw.h
+++ b/include/net/raw.h
@@ -75,7 +75,7 @@ static inline bool raw_sk_bound_dev_eq(struct net *net, int bound_dev_if,
int dif, int sdif)
{
#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
- return inet_bound_dev_eq(!!net->ipv4.sysctl_raw_l3mdev_accept,
+ return inet_bound_dev_eq(READ_ONCE(net->ipv4.sysctl_raw_l3mdev_accept),
bound_dev_if, dif, sdif);
#else
return inet_bound_dev_eq(true, bound_dev_if, dif, sdif);
--
2.35.1
From: Tejun Heo <[email protected]>
commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.
Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.
Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:
#1> mkdir -p /sys/fs/cgroup/misc/a/b
#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
#3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
#4> PID=$!
#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
#6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs
the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.
After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:
1. cgroup_migrate_add_src() is called on B for the leader.
2. cgroup_migrate_add_src() is called on A for the other threads.
3. cgroup_migrate_prepare_dst() is called. It scans the src list.
4. It notices that B wants to migrate to A, so it tries to A to the dst
list but realizes that its ->mg_preload_node is already busy.
5. and then it notices A wants to migrate to A as it's an identity
migration, it culls it by list_del_init()'ing its ->mg_preload_node and
putting references accordingly.
6. The rest of migration takes place with B on the src list but nothing on
the dst list.
This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.
This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.
This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Mukesh Ojha <[email protected]>
Reported-by: shisiyuan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy")
Cc: [email protected] # v3.16+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/cgroup-defs.h | 3 ++-
kernel/cgroup/cgroup.c | 37 +++++++++++++++++++++++--------------
2 files changed, 25 insertions(+), 15 deletions(-)
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -255,7 +255,8 @@ struct css_set {
* List of csets participating in the on-going migration either as
* source or destination. Protected by cgroup_mutex.
*/
- struct list_head mg_preload_node;
+ struct list_head mg_src_preload_node;
+ struct list_head mg_dst_preload_node;
struct list_head mg_node;
/*
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -743,7 +743,8 @@ struct css_set init_css_set = {
.task_iters = LIST_HEAD_INIT(init_css_set.task_iters),
.threaded_csets = LIST_HEAD_INIT(init_css_set.threaded_csets),
.cgrp_links = LIST_HEAD_INIT(init_css_set.cgrp_links),
- .mg_preload_node = LIST_HEAD_INIT(init_css_set.mg_preload_node),
+ .mg_src_preload_node = LIST_HEAD_INIT(init_css_set.mg_src_preload_node),
+ .mg_dst_preload_node = LIST_HEAD_INIT(init_css_set.mg_dst_preload_node),
.mg_node = LIST_HEAD_INIT(init_css_set.mg_node),
/*
@@ -1219,7 +1220,8 @@ static struct css_set *find_css_set(stru
INIT_LIST_HEAD(&cset->threaded_csets);
INIT_HLIST_NODE(&cset->hlist);
INIT_LIST_HEAD(&cset->cgrp_links);
- INIT_LIST_HEAD(&cset->mg_preload_node);
+ INIT_LIST_HEAD(&cset->mg_src_preload_node);
+ INIT_LIST_HEAD(&cset->mg_dst_preload_node);
INIT_LIST_HEAD(&cset->mg_node);
/* Copy the set of subsystem state objects generated in
@@ -2629,21 +2631,27 @@ int cgroup_migrate_vet_dst(struct cgroup
*/
void cgroup_migrate_finish(struct cgroup_mgctx *mgctx)
{
- LIST_HEAD(preloaded);
struct css_set *cset, *tmp_cset;
lockdep_assert_held(&cgroup_mutex);
spin_lock_irq(&css_set_lock);
- list_splice_tail_init(&mgctx->preloaded_src_csets, &preloaded);
- list_splice_tail_init(&mgctx->preloaded_dst_csets, &preloaded);
+ list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_src_csets,
+ mg_src_preload_node) {
+ cset->mg_src_cgrp = NULL;
+ cset->mg_dst_cgrp = NULL;
+ cset->mg_dst_cset = NULL;
+ list_del_init(&cset->mg_src_preload_node);
+ put_css_set_locked(cset);
+ }
- list_for_each_entry_safe(cset, tmp_cset, &preloaded, mg_preload_node) {
+ list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_dst_csets,
+ mg_dst_preload_node) {
cset->mg_src_cgrp = NULL;
cset->mg_dst_cgrp = NULL;
cset->mg_dst_cset = NULL;
- list_del_init(&cset->mg_preload_node);
+ list_del_init(&cset->mg_dst_preload_node);
put_css_set_locked(cset);
}
@@ -2685,7 +2693,7 @@ void cgroup_migrate_add_src(struct css_s
src_cgrp = cset_cgroup_from_root(src_cset, dst_cgrp->root);
- if (!list_empty(&src_cset->mg_preload_node))
+ if (!list_empty(&src_cset->mg_src_preload_node))
return;
WARN_ON(src_cset->mg_src_cgrp);
@@ -2696,7 +2704,7 @@ void cgroup_migrate_add_src(struct css_s
src_cset->mg_src_cgrp = src_cgrp;
src_cset->mg_dst_cgrp = dst_cgrp;
get_css_set(src_cset);
- list_add_tail(&src_cset->mg_preload_node, &mgctx->preloaded_src_csets);
+ list_add_tail(&src_cset->mg_src_preload_node, &mgctx->preloaded_src_csets);
}
/**
@@ -2721,7 +2729,7 @@ int cgroup_migrate_prepare_dst(struct cg
/* look up the dst cset for each src cset and link it to src */
list_for_each_entry_safe(src_cset, tmp_cset, &mgctx->preloaded_src_csets,
- mg_preload_node) {
+ mg_src_preload_node) {
struct css_set *dst_cset;
struct cgroup_subsys *ss;
int ssid;
@@ -2740,7 +2748,7 @@ int cgroup_migrate_prepare_dst(struct cg
if (src_cset == dst_cset) {
src_cset->mg_src_cgrp = NULL;
src_cset->mg_dst_cgrp = NULL;
- list_del_init(&src_cset->mg_preload_node);
+ list_del_init(&src_cset->mg_src_preload_node);
put_css_set(src_cset);
put_css_set(dst_cset);
continue;
@@ -2748,8 +2756,8 @@ int cgroup_migrate_prepare_dst(struct cg
src_cset->mg_dst_cset = dst_cset;
- if (list_empty(&dst_cset->mg_preload_node))
- list_add_tail(&dst_cset->mg_preload_node,
+ if (list_empty(&dst_cset->mg_dst_preload_node))
+ list_add_tail(&dst_cset->mg_dst_preload_node,
&mgctx->preloaded_dst_csets);
else
put_css_set(dst_cset);
@@ -2980,7 +2988,8 @@ static int cgroup_update_dfl_csses(struc
goto out_finish;
spin_lock_irq(&css_set_lock);
- list_for_each_entry(src_cset, &mgctx.preloaded_src_csets, mg_preload_node) {
+ list_for_each_entry(src_cset, &mgctx.preloaded_src_csets,
+ mg_src_preload_node) {
struct task_struct *task, *ntask;
/* all tasks in src_csets need to be migrated */
From: Chris Wilson <[email protected]>
[ Upstream commit a1c5a7bf79c1faa5633b918b5c0666545e84c4d1 ]
Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.
Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.
Cc: [email protected] # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <[email protected]>
Tested-by: Mauro Carvalho Chehab <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Thomas Hellström <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org
(cherry picked from commit 33da97894758737895e90c909f16786052680ef4)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/gt/intel_gt.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c
index c8c070375d29..f6d7f5d307d7 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt.c
@@ -339,6 +339,20 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
mutex_lock(>->tlb_invalidate_lock);
intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
+ spin_lock_irq(&uncore->lock); /* serialise invalidate with GT reset */
+
+ for_each_engine(engine, gt, id) {
+ struct reg_and_bit rb;
+
+ rb = get_reg_and_bit(engine, regs == gen8_regs, regs, num);
+ if (!i915_mmio_reg_offset(rb.reg))
+ continue;
+
+ intel_uncore_write_fw(uncore, rb.reg, rb.bit);
+ }
+
+ spin_unlock_irq(&uncore->lock);
+
for_each_engine(engine, gt, id) {
/*
* HW architecture suggest typical invalidation time at 40us,
@@ -353,7 +367,6 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
if (!i915_mmio_reg_offset(rb.reg))
continue;
- intel_uncore_write_fw(uncore, rb.reg, rb.bit);
if (__intel_wait_for_register_fw(uncore,
rb.reg, rb.bit, 0,
timeout_us, timeout_ms,
--
2.35.1
From: Meng Tang <[email protected]>
commit 841bdf85c226803a78a9319af9b2caa9bf3e2eda upstream.
Another Dell model, another fixup entry: Latitude E5430 needs the same
fixup as other Latitude E series as workaround for noise problems.
Signed-off-by: Meng Tang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8056,6 +8056,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1025, 0x142b, "Acer Swift SF314-42", ALC255_FIXUP_ACER_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x1028, 0x053c, "Dell Latitude E5430", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05be, "Dell Latitude E6540", ALC292_FIXUP_DELL_E7X),
From: Hangyu Hua <[email protected]>
[ Upstream commit 00aff3590fc0a73bddd3b743863c14e76fd35c0c ]
Free sk in case tipc_sk_insert() fails.
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Tung Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/socket.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index d543c4556df2..58c4d61d603f 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -455,6 +455,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
sock_init_data(sock, sk);
tipc_set_sk_state(sk, TIPC_OPEN);
if (tipc_sk_insert(tsk)) {
+ sk_free(sk);
pr_warn("Socket create failed; port number exhausted\n");
return -EINVAL;
}
--
2.35.1
From: Liang He <[email protected]>
[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ]
In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.
Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: Liang He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/faraday/ftgmac100.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index d7478d332820..98e94d914597 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1734,6 +1734,19 @@ static void ftgmac100_setup_clk(struct ftgmac100 *priv)
FTGMAC_100MHZ);
}
+static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
+{
+ struct device_node *child_np = of_get_child_by_name(np, name);
+ bool ret = false;
+
+ if (child_np) {
+ ret = true;
+ of_node_put(child_np);
+ }
+
+ return ret;
+}
+
static int ftgmac100_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -1850,7 +1863,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
/* Display what we found */
phy_attached_info(phy);
- } else if (np && !of_get_child_by_name(np, "mdio")) {
+ } else if (np && !ftgmac100_has_child_node(np, "mdio")) {
/* Support legacy ASPEED devicetree descriptions that decribe a
* MAC with an embedded MDIO controller but have no "mdio"
* child node. Automatically scan the MDIO bus for available
--
2.35.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ]
While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/icmp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index e05e972445fe..9bc01411be4c 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -290,7 +290,7 @@ static bool icmpv4_mask_allow(struct net *net, int type, int code)
return true;
/* Limit if icmp type is enabled in ratemask. */
- if (!((1 << type) & net->ipv4.sysctl_icmp_ratemask))
+ if (!((1 << type) & READ_ONCE(net->ipv4.sysctl_icmp_ratemask)))
return true;
return false;
--
2.35.1
From: Meng Tang <[email protected]>
commit 4ba5c853d7945b3855c3dcb293f7f9f019db641e upstream.
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Signed-off-by: Meng Tang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6427,6 +6427,7 @@ enum {
ALC298_FIXUP_LENOVO_SPK_VOLUME,
ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
ALC269_FIXUP_ATIV_BOOK_8,
+ ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE,
ALC221_FIXUP_HP_MIC_NO_PRESENCE,
ALC256_FIXUP_ASUS_HEADSET_MODE,
ALC256_FIXUP_ASUS_MIC,
@@ -7305,6 +7306,16 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_NO_SHUTUP
},
+ [ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+ { 0x1a, 0x01813030 }, /* use as headphone mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HEADSET_MODE
+ },
[ALC221_FIXUP_HP_MIC_NO_PRESENCE] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
@@ -8163,6 +8174,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x2335, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x2b5e, "HP 288 Pro G2 MT", ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x802e, "HP Z240 SFF", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x802f, "HP Z240", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x820d, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ]
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/networking/ip-sysctl.txt | 2 +-
net/ipv4/cipso_ipv4.c | 12 +++++++-----
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8af3771a3ebf..f60d4159fff4 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -876,7 +876,7 @@ cipso_cache_enable - BOOLEAN
cipso_cache_bucket_size - INTEGER
The CIPSO label cache consists of a fixed size hash table with each
hash bucket containing a number of cache entries. This variable limits
- the number of entries in each hash bucket; the larger the value the
+ the number of entries in each hash bucket; the larger the value is, the
more CIPSO label mappings that can be cached. When the number of
entries in a given hash bucket reaches this limit adding new entries
causes the oldest entry in the bucket to be removed to make room.
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index c1ac802d6894..42eaad5e515f 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -240,7 +240,7 @@ static int cipso_v4_cache_check(const unsigned char *key,
struct cipso_v4_map_cache_entry *prev_entry = NULL;
u32 hash;
- if (!cipso_v4_cache_enabled)
+ if (!READ_ONCE(cipso_v4_cache_enabled))
return -ENOENT;
hash = cipso_v4_map_cache_hash(key, key_len);
@@ -297,13 +297,14 @@ static int cipso_v4_cache_check(const unsigned char *key,
int cipso_v4_cache_add(const unsigned char *cipso_ptr,
const struct netlbl_lsm_secattr *secattr)
{
+ int bkt_size = READ_ONCE(cipso_v4_cache_bucketsize);
int ret_val = -EPERM;
u32 bkt;
struct cipso_v4_map_cache_entry *entry = NULL;
struct cipso_v4_map_cache_entry *old_entry = NULL;
u32 cipso_ptr_len;
- if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0)
+ if (!READ_ONCE(cipso_v4_cache_enabled) || bkt_size <= 0)
return 0;
cipso_ptr_len = cipso_ptr[1];
@@ -323,7 +324,7 @@ int cipso_v4_cache_add(const unsigned char *cipso_ptr,
bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1);
spin_lock_bh(&cipso_v4_cache[bkt].lock);
- if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) {
+ if (cipso_v4_cache[bkt].size < bkt_size) {
list_add(&entry->list, &cipso_v4_cache[bkt].list);
cipso_v4_cache[bkt].size += 1;
} else {
@@ -1200,7 +1201,8 @@ static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def,
/* This will send packets using the "optimized" format when
* possible as specified in section 3.4.2.6 of the
* CIPSO draft. */
- if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10)
+ if (READ_ONCE(cipso_v4_rbm_optfmt) && ret_val > 0 &&
+ ret_val <= 10)
tag_len = 14;
else
tag_len = 4 + ret_val;
@@ -1603,7 +1605,7 @@ int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option)
* all the CIPSO validations here but it doesn't
* really specify _exactly_ what we need to validate
* ... so, just make it a sysctl tunable. */
- if (cipso_v4_rbm_strictvalid) {
+ if (READ_ONCE(cipso_v4_rbm_strictvalid)) {
if (cipso_v4_map_lvl_valid(doi_def,
tag[3]) < 0) {
err_offset = opt_iter + 3;
--
2.35.1
From: Charles Keepax <[email protected]>
[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ]
The DRE controls on wm5110 should return a value of 1 if the DRE state
is actually changed, update to fix this.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm5110.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 9dc215b5c504..06ec3f48c808 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -413,6 +413,7 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
unsigned int rnew = (!!ucontrol->value.integer.value[1]) << mc->rshift;
unsigned int lold, rold;
unsigned int lena, rena;
+ bool change = false;
int ret;
snd_soc_dapm_mutex_lock(dapm);
@@ -440,8 +441,8 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
goto err;
}
- ret = regmap_update_bits(arizona->regmap, ARIZONA_DRE_ENABLE,
- mask, lnew | rnew);
+ ret = regmap_update_bits_check(arizona->regmap, ARIZONA_DRE_ENABLE,
+ mask, lnew | rnew, &change);
if (ret) {
dev_err(arizona->dev, "Failed to set DRE: %d\n", ret);
goto err;
@@ -454,6 +455,9 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
if (!rnew && rold)
wm5110_clear_pga_volume(arizona, mc->rshift);
+ if (change)
+ ret = 1;
+
err:
snd_soc_dapm_mutex_unlock(dapm);
--
2.35.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]
Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.
This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.
Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.
Signed-off-by: Stephan Gerhold <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virtio/virtio_mmio.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 74547323aa83..2a2d817caeff 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -62,6 +62,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/virtio.h>
@@ -514,6 +515,25 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
.bus_name = vm_bus_name,
};
+#ifdef CONFIG_PM_SLEEP
+static int virtio_mmio_freeze(struct device *dev)
+{
+ struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+ return virtio_device_freeze(&vm_dev->vdev);
+}
+
+static int virtio_mmio_restore(struct device *dev)
+{
+ struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+ return virtio_device_restore(&vm_dev->vdev);
+}
+
+static const struct dev_pm_ops virtio_mmio_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(virtio_mmio_freeze, virtio_mmio_restore)
+};
+#endif
static void virtio_mmio_release_dev(struct device *_d)
{
@@ -767,6 +787,9 @@ static struct platform_driver virtio_mmio_driver = {
.name = "virtio-mmio",
.of_match_table = virtio_mmio_match,
.acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+ .pm = &virtio_mmio_pm_ops,
+#endif
},
};
--
2.35.1
From: Francesco Dolcini <[email protected]>
[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ]
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/sgtl5000.c | 9 +++++++++
sound/soc/codecs/sgtl5000.h | 1 +
2 files changed, 10 insertions(+)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 8a1e485982d8..76d3c0681f37 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1788,6 +1788,9 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
{
struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+ regmap_write(sgtl5000->regmap, SGTL5000_CHIP_DIG_POWER, SGTL5000_DIG_POWER_DEFAULT);
+ regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, SGTL5000_ANA_POWER_DEFAULT);
+
clk_disable_unprepare(sgtl5000->mclk);
regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
@@ -1795,6 +1798,11 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
return 0;
}
+static void sgtl5000_i2c_shutdown(struct i2c_client *client)
+{
+ sgtl5000_i2c_remove(client);
+}
+
static const struct i2c_device_id sgtl5000_id[] = {
{"sgtl5000", 0},
{},
@@ -1815,6 +1823,7 @@ static struct i2c_driver sgtl5000_i2c_driver = {
},
.probe = sgtl5000_i2c_probe,
.remove = sgtl5000_i2c_remove,
+ .shutdown = sgtl5000_i2c_shutdown,
.id_table = sgtl5000_id,
};
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 56ec5863f250..3a808c762299 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -80,6 +80,7 @@
/*
* SGTL5000_CHIP_DIG_POWER
*/
+#define SGTL5000_DIG_POWER_DEFAULT 0x0000
#define SGTL5000_ADC_EN 0x0040
#define SGTL5000_DAC_EN 0x0020
#define SGTL5000_DAP_POWERUP 0x0010
--
2.35.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]
Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.
This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.
Signed-off-by: Stephan Gerhold <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virtio/virtio_mmio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 2a2d817caeff..e781e5e9215f 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -527,6 +527,9 @@ static int virtio_mmio_restore(struct device *dev)
{
struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+ if (vm_dev->version == 1)
+ writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
return virtio_device_restore(&vm_dev->vdev);
}
--
2.35.1
From: Meng Tang <[email protected]>
commit 9b043a8f386485c74c0f8eea2c287d5bdbdf3279 upstream.
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
Signed-off-by: Meng Tang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8423,6 +8423,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),
+ SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),
From: Jon Hunter <[email protected]>
[ Upstream commit 029c1c2059e9c4b38f97a06204cdecd10cfbeb8a ]
There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.
[0] https://lore.kernel.org/linux-tegra/[email protected]/
Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jon Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index dd9967aeda22..0f0094ced776 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -357,6 +357,7 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
data->fix_mac_speed = tegra_eqos_fix_speed;
data->init = tegra_eqos_init;
data->bsp_priv = eqos;
+ data->sph_disable = 1;
err = tegra_eqos_init(pdev, eqos);
if (err < 0)
--
2.35.1
From: Juergen Gross <[email protected]>
[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ]
The .brk section has the same properties as .bss: it is an alloc-only
section and should be cleared before being used.
Not doing so is especially a problem for Xen PV guests, as the
hypervisor will validate page tables (check for writable page tables
and hypervisor private bits) before accepting them to be used.
Make sure .brk is initially zero by letting clear_bss() clear the brk
area, too.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/head64.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 206a4b6144c2..950286016f63 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -383,6 +383,8 @@ static void __init clear_bss(void)
{
memset(__bss_start, 0,
(unsigned long) __bss_stop - (unsigned long) __bss_start);
+ memset(__brk_base, 0,
+ (unsigned long) __brk_limit - (unsigned long) __brk_base);
}
static unsigned long get_cmd_line_ptr(void)
--
2.35.1
From: Felix Fietkau <[email protected]>
commit 50e2ab39291947b6c6c7025cf01707c270fcde59 upstream.
When using iTXQ, the code assumes that there is only one vif queue for
broadcast packets, using the BE queue. Allowing non-BE queue marking
violates that assumption and txq->ac == skb_queue_mapping is no longer
guaranteed. This can cause issues with queue handling in the driver and
also causes issues with the recent ATF change, resulting in an AQL
underflow warning.
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/wme.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -145,8 +145,8 @@ u16 __ieee80211_select_queue(struct ieee
bool qos;
/* all mesh/ocb stations are required to support WME */
- if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
- sdata->vif.type == NL80211_IFTYPE_OCB)
+ if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+ sdata->vif.type == NL80211_IFTYPE_OCB))
qos = true;
else if (sta)
qos = sta->sta.wme;
From: Muchun Song <[email protected]>
[ Upstream commit 43b5240ca6b33108998810593248186b1e3ae34a ]
"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.
Fixes: 4518085e127d ("mm, sysctl: make NUMA stats configurable")
Signed-off-by: Muchun Song <[email protected]>
Cc: <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sysctl.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0457d36540e3..6f971807bf79 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1443,6 +1443,17 @@ static struct ctl_table vm_table[] = {
.extra1 = SYSCTL_ZERO,
.extra2 = &one_hundred,
},
+#ifdef CONFIG_NUMA
+ {
+ .procname = "numa_stat",
+ .data = &sysctl_vm_numa_stat,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = sysctl_vm_numa_stat_handler,
+ .extra1 = SYSCTL_ZERO,
+ .extra2 = SYSCTL_ONE,
+ },
+#endif
#ifdef CONFIG_HUGETLB_PAGE
{
.procname = "nr_hugepages",
@@ -1459,15 +1470,6 @@ static struct ctl_table vm_table[] = {
.mode = 0644,
.proc_handler = &hugetlb_mempolicy_sysctl_handler,
},
- {
- .procname = "numa_stat",
- .data = &sysctl_vm_numa_stat,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = sysctl_vm_numa_stat_handler,
- .extra1 = SYSCTL_ZERO,
- .extra2 = SYSCTL_ONE,
- },
#endif
{
.procname = "hugetlb_shm_group",
--
2.35.1
From: Linus Torvalds <[email protected]>
[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ]
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running. Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/signal.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/signal.c b/kernel/signal.c
index 3f61367fd168..1f4293a107b4 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1916,12 +1916,12 @@ bool do_notify_parent(struct task_struct *tsk, int sig)
bool autoreap = false;
u64 utime, stime;
- BUG_ON(sig == -1);
+ WARN_ON_ONCE(sig == -1);
- /* do_notify_parent_cldstop should have been called instead. */
- BUG_ON(task_is_stopped_or_traced(tsk));
+ /* do_notify_parent_cldstop should have been called instead. */
+ WARN_ON_ONCE(task_is_stopped_or_traced(tsk));
- BUG_ON(!tsk->ptrace &&
+ WARN_ON_ONCE(!tsk->ptrace &&
(tsk->group_leader != tsk || !thread_group_empty(tsk)));
/* Wake up all pidfd waiters */
--
2.35.1
From: Hangyu Hua <[email protected]>
[ Upstream commit 85144df9ff4652816448369de76897c57cbb1b93 ]
If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.
Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: José Roberto de Souza <[email protected]>
(cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp_mst.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 74d45a0eecb8..c59b43fb34a8 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -520,6 +520,7 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
DRM_MODE_CONNECTOR_DisplayPort);
if (ret) {
+ drm_dp_mst_put_port_malloc(port);
intel_connector_free(intel_connector);
return NULL;
}
--
2.35.1
From: Xiu Jianfeng <[email protected]>
commit 51dd64bb99e4478fc5280171acd8e1b529eadaf7 upstream.
This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37.
Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.
And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.
Reported-by: Guozihua (Scott) <[email protected]>
Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/evm/evm_crypto.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -75,7 +75,7 @@ static struct shash_desc *init_desc(char
{
long rc;
const char *algo;
- struct crypto_shash **tfm, *tmp_tfm = NULL;
+ struct crypto_shash **tfm, *tmp_tfm;
struct shash_desc *desc;
if (type == EVM_XATTR_HMAC) {
@@ -120,16 +120,13 @@ unlock:
alloc:
desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(*tfm),
GFP_KERNEL);
- if (!desc) {
- crypto_free_shash(tmp_tfm);
+ if (!desc)
return ERR_PTR(-ENOMEM);
- }
desc->tfm = *tfm;
rc = crypto_shash_init(desc);
if (rc) {
- crypto_free_shash(tmp_tfm);
kfree(desc);
return ERR_PTR(rc);
}
From: Íñigo Huguet <[email protected]>
[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]
Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.
Set the pointer to NULL at release time to not trying to read it later.
Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k
allocated by task 6771 on cpu 10 at 3137.860196s:
pci_alloc_dev+0x21/0x60
pci_iov_add_virtfn+0x2a2/0x320
sriov_enable+0x212/0x3e0
efx_ef10_sriov_configure+0x67/0x80 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xba/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
freed by task 6771 on cpu 12 at 3170.991309s:
device_release+0x34/0x90
kobject_cleanup+0x3a/0x130
pci_iov_remove_virtfn+0xd9/0x120
sriov_disable+0x30/0xe0
efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <[email protected]>
Signed-off-by: Íñigo Huguet <[email protected]>
Acked-by: Martin Habets <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ef10_sriov.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index e7c6aa29d323..b318ce83f5bf 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -412,8 +412,9 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
{
struct pci_dev *dev = efx->pci_dev;
+ struct efx_ef10_nic_data *nic_data = efx->nic_data;
unsigned int vfs_assigned = pci_vfs_assigned(dev);
- int rc = 0;
+ int i, rc = 0;
if (vfs_assigned && !force) {
netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -421,10 +422,13 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
return -EBUSY;
}
- if (!vfs_assigned)
+ if (!vfs_assigned) {
+ for (i = 0; i < efx->vf_count; i++)
+ nic_data->vf[i].pci_dev = NULL;
pci_disable_sriov(dev);
- else
+ } else {
rc = -EBUSY;
+ }
efx_ef10_sriov_free_vf_vswitching(efx);
efx->vf_count = 0;
--
2.35.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ]
While reading inetpeer sysctl variables, they can be changed
concurrently. So, we need to add READ_ONCE() to avoid data-races.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/inetpeer.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index ff327a62c9ce..a18668552d33 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -148,16 +148,20 @@ static void inet_peer_gc(struct inet_peer_base *base,
struct inet_peer *gc_stack[],
unsigned int gc_cnt)
{
+ int peer_threshold, peer_maxttl, peer_minttl;
struct inet_peer *p;
__u32 delta, ttl;
int i;
- if (base->total >= inet_peer_threshold)
+ peer_threshold = READ_ONCE(inet_peer_threshold);
+ peer_maxttl = READ_ONCE(inet_peer_maxttl);
+ peer_minttl = READ_ONCE(inet_peer_minttl);
+
+ if (base->total >= peer_threshold)
ttl = 0; /* be aggressive */
else
- ttl = inet_peer_maxttl
- - (inet_peer_maxttl - inet_peer_minttl) / HZ *
- base->total / inet_peer_threshold * HZ;
+ ttl = peer_maxttl - (peer_maxttl - peer_minttl) / HZ *
+ base->total / peer_threshold * HZ;
for (i = 0; i < gc_cnt; i++) {
p = gc_stack[i];
--
2.35.1
From: Íñigo Huguet <[email protected]>
[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]
When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.
When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
BUG_ON(in_interrupt());
This patch reenables BH to release the buffer.
Log messages when the bug is hit:
kernel BUG at mm/vmalloc.c:2727!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:vunmap+0x2e/0x30
...skip...
Call Trace:
__iommu_dma_free+0x96/0x100
efx_nic_free_buffer+0x2b/0x40 [sfc]
efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
efx_ef10_update_stats_vf+0x18/0x40 [sfc]
efx_start_all+0x15e/0x1d0 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xe7/0x1a0
__dev_change_flags+0x1d7/0x240
dev_change_flags+0x21/0x60
...skip...
Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <[email protected]>
Signed-off-by: Íñigo Huguet <[email protected]>
Acked-by: Edward Cree <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ef10.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 936e64dd81b5..b23741d3c9be 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -2056,7 +2056,10 @@ static int efx_ef10_try_update_nic_stats_vf(struct efx_nic *efx)
efx_update_sw_stats(efx, stats);
out:
+ /* releasing a DMA coherent buffer with BH disabled can panic */
+ spin_unlock_bh(&efx->stats_lock);
efx_nic_free_buffer(efx, &stats_buf);
+ spin_lock_bh(&efx->stats_lock);
return rc;
}
--
2.35.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 0609e200246bfd3b7516091c491bec4308349055 ]
Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.
Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.
This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.
In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/proc-v7-bugs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index f2c8ff0683fd..b09c54499f95 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -221,10 +221,10 @@ static int spectre_bhb_install_workaround(int method)
return SPECTRE_VULNERABLE;
spectre_bhb_method = method;
- }
- pr_info("CPU%u: Spectre BHB: using %s workaround\n",
- smp_processor_id(), spectre_bhb_method_name(method));
+ pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+ smp_processor_id(), spectre_bhb_method_name(method));
+ }
return SPECTRE_MITIGATED;
}
--
2.35.1
From: Chanho Park <[email protected]>
commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream.
The src_maxburst and dst_maxburst have been changed to 1 but the settings
of the UCON register aren't changed yet. They should be changed as well
according to the dmaengine slave config.
Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc: stable <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Chanho Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/samsung.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -238,8 +238,7 @@ static void enable_tx_dma(struct s3c24xx
/* Enable tx dma mode */
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
- ucon |= (dma_get_cache_alignment() >= 16) ?
- S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+ ucon |= S3C64XX_UCON_TXBURST_1;
ucon |= S3C64XX_UCON_TXMODE_DMA;
wr_regl(port, S3C2410_UCON, ucon);
@@ -512,7 +511,7 @@ static void enable_rx_dma(struct s3c24xx
S3C64XX_UCON_DMASUS_EN |
S3C64XX_UCON_TIMEOUT_EN |
S3C64XX_UCON_RXMODE_MASK);
- ucon |= S3C64XX_UCON_RXBURST_16 |
+ ucon |= S3C64XX_UCON_RXBURST_1 |
0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
S3C64XX_UCON_EMPTYINT_EN |
S3C64XX_UCON_TIMEOUT_EN |
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ]
While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/icmp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index f86f948a4b4c..a590ff81e5f8 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -261,11 +261,12 @@ bool icmp_global_allow(void)
spin_lock(&icmp_global.lock);
delta = min_t(u32, now - icmp_global.stamp, HZ);
if (delta >= HZ / 50) {
- incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
+ incr = READ_ONCE(sysctl_icmp_msgs_per_sec) * delta / HZ;
if (incr)
WRITE_ONCE(icmp_global.stamp, now);
}
- credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
+ credit = min_t(u32, icmp_global.credit + incr,
+ READ_ONCE(sysctl_icmp_msgs_burst));
if (credit) {
/* We want to use a credit of one in average, but need to randomize
* it for security reasons.
--
2.35.1
From: Ryusuke Konishi <[email protected]>
commit 5924e6ec1585445f251ea92713eb15beb732622a upstream.
The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:
$ umask
0022
$ touch file && ln -s file symlink; ls -l file symlink
-rw-r--r--. 1 root root 0 Jun 23 16:29 file
lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file
This fixes the bug by inserting a missing check that excludes
symlinks.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Reported-by: Tommy Pettersson <[email protected]>
Reported-by: Ciprian Craciun <[email protected]>
Tested-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nilfs2/nilfs.h | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -198,6 +198,9 @@ static inline int nilfs_acl_chmod(struct
static inline int nilfs_init_acl(struct inode *inode, struct inode *dir)
{
+ if (S_ISLNK(inode->i_mode))
+ return 0;
+
inode->i_mode &= ~current_umask();
return 0;
}
From: Zhen Lei <[email protected]>
[ Upstream commit 598f0a99fa8a35be44b27106b43ddc66417af3b1 ]
commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.
|<---------FDT_FIXED_SIZE------>|
| |
-------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
-------------------------------
1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
received the notification to invalid the corresponding cachelines, but
the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
is read.
To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.
Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093
sp : c0ecbf30 ip : 00000000 fp : 00000001
r10: c08410d0 r9 : 00000001 r8 : c0825e0c
r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74
r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044
... ...
Stack: (0xc0ecbf30 to 0xc0ecc000)
bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170
bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
... ... < next prev >
(__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
(__list_del_entry) from (finish_swait+0x60/0x7c)
(finish_swait) from (rcu_gp_kthread+0x560/0xa20)
(rcu_gp_kthread) from (kthread+0x14c/0x15c)
(kthread) from (ret_from_fork+0x14/0x24)
The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.
Fixes: 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/include/asm/mach/map.h | 1 +
arch/arm/mm/mmu.c | 15 ++++++++++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
MT_HIGH_VECTORS,
MT_MEMORY_RWX,
MT_MEMORY_RW,
+ MT_MEMORY_RO,
MT_ROM,
MT_MEMORY_RWX_NONCACHED,
MT_MEMORY_RW_DTCM,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6e7f841f67ff..463cbb0631be 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -316,6 +316,13 @@ static struct mem_type mem_types[] __ro_after_init = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_RO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_XN | L_PTE_RDONLY,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT,
+ .domain = DOMAIN_KERNEL,
+ },
[MT_ROM] = {
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
@@ -515,6 +522,7 @@ static void __init build_mem_type_table(void)
/* Also setup NX memory mapping */
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+ mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
}
if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
/*
@@ -597,6 +605,7 @@ static void __init build_mem_type_table(void)
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
#endif
/*
@@ -617,6 +626,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+ mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -680,6 +691,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+ mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+ mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1361,7 +1374,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
map.virtual = FDT_FIXED_BASE;
map.length = FDT_FIXED_SIZE;
- map.type = MT_ROM;
+ map.type = MT_MEMORY_RO;
create_mapping(&map);
}
--
2.35.1
From: Michael Walle <[email protected]>
[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]
Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/nxp-nci/i2c.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -122,7 +122,9 @@ static int nxp_nci_i2c_fw_read(struct nx
skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
- if (r != frame_len) {
+ if (r < 0) {
+ goto fw_read_exit_free_skb;
+ } else if (r != frame_len) {
nfc_err(&client->dev,
"Invalid frame length: %u (expected %zu)\n",
r, frame_len);
@@ -166,7 +168,9 @@ static int nxp_nci_i2c_nci_read(struct n
return 0;
r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
- if (r != header.plen) {
+ if (r < 0) {
+ goto nci_read_exit_free_skb;
+ } else if (r != header.plen) {
nfc_err(&client->dev,
"Invalid frame payload length: %u (expected %u)\n",
r, header.plen);
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ]
While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/sock.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index 7f213cfcb3cc..9d687070d272 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1400,7 +1400,7 @@ void __sk_mem_reclaim(struct sock *sk, int amount);
/* sysctl_mem values are in pages, we convert them in SK_MEM_QUANTUM units */
static inline long sk_prot_mem_limits(const struct sock *sk, int index)
{
- long val = sk->sk_prot->sysctl_mem[index];
+ long val = READ_ONCE(sk->sk_prot->sysctl_mem[index]);
#if PAGE_SIZE > SK_MEM_QUANTUM
val <<= PAGE_SHIFT - SK_MEM_QUANTUM_SHIFT;
--
2.35.1
On 7/19/2022 4:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels and built tested
with BMIPS_GENERIC (bmips_stb_defconfig):
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Tue, Jul 19, 2022 at 01:53:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 161 pass: 161 fail: 0
Qemu test results:
total: 449 pass: 449 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Tue, 19 Jul 2022 at 17:32, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.207-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.4.207-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 0b5688944207ade9aea3eabc48e296ff5a72a529
* git describe: v5.4.206-72-g0b5688944207
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.206-72-g0b5688944207
## Test Regressions (compared to v5.4.206)
No test regressions found.
## Metric Regressions (compared to v5.4.206)
No metric regressions found.
## Test Fixes (compared to v5.4.206)
No test fixes found.
## Metric Fixes (compared to v5.4.206)
No metric fixes found.
## Test result summary
total: 126185, pass: 112707, fail: 727, skip: 11723, xfail: 1028
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 307 total, 307 passed, 0 failed
* arm64: 61 total, 57 passed, 4 failed
* i386: 28 total, 26 passed, 2 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 55 total, 53 passed, 2 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
Hi Greg,
On Tue, Jul 19, 2022 at 01:53:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.207 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000.
> Anything received after that time might be too late.
Build test (gcc version 11.3.1 20220706):
mips: 65 configs -> no failure
arm: 106 configs -> no failure
arm64: 2 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/1520
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip