Subject: [PATCH 2/2] clk: mediatek: mt8195: Add reset idx for USB/PCIe T-PHY

Add the reset idx for the t-phy port 1, used as either USB or
PCI-Express (secondary controller) PHY, depending on board-specific
configuration/layout.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/clk/mediatek/clk-mt8195-infra_ao.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/clk/mediatek/clk-mt8195-infra_ao.c b/drivers/clk/mediatek/clk-mt8195-infra_ao.c
index 75b54ec9c46c..fcd410461d3b 100644
--- a/drivers/clk/mediatek/clk-mt8195-infra_ao.c
+++ b/drivers/clk/mediatek/clk-mt8195-infra_ao.c
@@ -200,6 +200,7 @@ static u16 infra_ao_rst_ofs[] = {

static u16 infra_ao_idx_map[] = {
[MT8195_INFRA_RST0_THERM_CTRL_SWRST] = 0 * RST_NR_PER_BANK + 0,
+ [MT8195_INFRA_RST2_USBSIF_P1_SWRST] = 2 * RST_NR_PER_BANK + 18,
[MT8195_INFRA_RST2_PCIE_P0_SWRST] = 2 * RST_NR_PER_BANK + 26,
[MT8195_INFRA_RST2_PCIE_P1_SWRST] = 2 * RST_NR_PER_BANK + 27,
[MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST] = 3 * RST_NR_PER_BANK + 5,
--
2.35.1


2022-09-01 01:33:19

by Stephen Boyd

[permalink] [raw]
Subject: Re: [PATCH 2/2] clk: mediatek: mt8195: Add reset idx for USB/PCIe T-PHY

Quoting AngeloGioacchino Del Regno (2022-07-20 03:28:17)
> Add the reset idx for the t-phy port 1, used as either USB or
> PCI-Express (secondary controller) PHY, depending on board-specific
> configuration/layout.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> ---

Applied to clk-next