1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disable the pull-up for mi2s1 lines.
Signed-off-by: Judy Hsiao <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 57bacca6c5e1..67874749f1a8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -632,6 +632,21 @@ &dp_hot_plug_det {
bias-disable;
};
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+ bias-disable;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.37.0.170.g444d1eabd0-goog