Type registers in regmap-irq have been deprecated in favor of config
registers, which are more general. Chips using type_base can switch
over to a single config base register and a standard ->set_irq_type()
callback provided by regmap-irq, which uses the type info associated
with each 'struct regmap_irq' to update type registers in the same
way as the old code did.
Signed-off-by: Aidan MacDonald <[email protected]>
---
sound/soc/codecs/wcd9335.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index 3cb7a3eab8c7..81678c85ff7b 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -5031,16 +5031,22 @@ static const struct regmap_irq wcd9335_codec_irqs[] = {
},
};
+static const unsigned int wcd9335_config_regs[] = {
+ WCD9335_INTR_LEVEL0,
+};
+
static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
.name = "wcd9335_pin1_irq",
.status_base = WCD9335_INTR_PIN1_STATUS0,
.mask_base = WCD9335_INTR_PIN1_MASK0,
.ack_base = WCD9335_INTR_PIN1_CLEAR0,
- .type_base = WCD9335_INTR_LEVEL0,
- .num_type_reg = 4,
.num_regs = 4,
.irqs = wcd9335_codec_irqs,
.num_irqs = ARRAY_SIZE(wcd9335_codec_irqs),
+ .config_base = wcd9335_config_regs,
+ .num_config_bases = ARRAY_SIZE(wcd9335_config_regs),
+ .num_config_regs = 4,
+ .set_type_config = regmap_irq_set_type_config_simple,
};
static int wcd9335_parse_dt(struct wcd9335_codec *wcd)
--
2.35.1