2022-07-22 22:18:23

by Hawkins, Nick

[permalink] [raw]
Subject: [PATCH v3 0/5] Add SPI Driver to HPE GXP Architecture

From: Nick Hawkins <[email protected]>

Changes since v3:
*Fixed indentations in hpe,gxp-spifi.yaml

Changes since v2:
*Changed the CONFIG_SPI_GXP from y to m in defconfig
*Removed extra space around < > for reg in hpe,gxp-spifi.yaml
*Changed interrupt-parrent to interrupt-parent in hpe,gxp-spifi.yaml
*Removed repeated include file in spi-gxp.c
*Removed unnecessary initialization of ret variable in spi-gxp.c
*Removed conditional variable checks where failure is not possible in
spi-gxp.c
*Removed unecessary variable cs in spi-gxp.c
*Removed blank gxp-spifi-remove function in spi-gxp.c
*Fixed error messages so they are not repetitive

The GXP supports 3 separate SPI interfaces to accommodate the system
flash, core flash, and other functions. The SPI engine supports variable
clock frequency, selectable 3-byte or 4-byte addressing and a
configurable x1, x2, and x4 command/address/data modes. The memory
buffer for reading and writing ranges between 256 bytes and 8KB. This
driver supports access to the core flash and bios part.

Nick Hawkins (5):
spi: spi-gxp: Add support for HPE GXP SoCs
spi: dt-bindings: add documentation for hpe,gxp-spifi
ARM: dts: hpe: Add spi driver node
ARM: configs: multi_v7_defconfig: Enable HPE GXP SPI driver
MAINTAINERS: add spi support to GXP

.../bindings/spi/hpe,gxp-spifi.yaml | 56 +++
MAINTAINERS | 2 +
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 ++++
arch/arm/boot/dts/hpe-gxp.dtsi | 21 +-
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-gxp.c | 325 ++++++++++++++++++
8 files changed, 470 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
create mode 100644 drivers/spi/spi-gxp.c

--
2.17.1


2022-07-22 22:34:21

by Hawkins, Nick

[permalink] [raw]
Subject: [PATCH v3 4/5] ARM: configs: multi_v7_defconfig: Enable HPE GXP SPI driver

From: Nick Hawkins <[email protected]>

Enable the SPI driver on the HPE GXP BMC.

Signed-off-by: Nick Hawkins <[email protected]>

---
v3:
*No change
v2:
*Change CONFIG_SPI_GXP from y to m
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ce9826bce29b..ee8a730dabc9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -443,6 +443,7 @@ CONFIG_SPI_CADENCE=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_SPI_GPIO=m
+CONFIG_SPI_GXP=m
CONFIG_SPI_FSL_DSPI=m
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
--
2.17.1