From: Marcel Ziswiler <[email protected]>
Avoid the following checkpatch warning:
arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs
where possible
arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the
start of a line
Signed-off-by: Marcel Ziswiler <[email protected]>
---
(no changes since v1)
arch/arm/boot/dts/imx7d-pico.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e519897fae08..e0bff39e8d3e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -41,7 +41,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
- };
+ };
reg_wlreg_on: regulator-wlreg_on {
compatible = "regulator-fixed";
@@ -432,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
>;
};
@@ -493,19 +493,19 @@ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
pinctrl_pwm1: pwm1 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
>;
};
pinctrl_pwm2: pwm2 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
>;
};
pinctrl_pwm3: pwm3 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
>;
};
--
2.35.1