From: ChiYuan Huang <[email protected]>
Add MT6370 backlight binding documentation.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: ChiYuan Huang <[email protected]>
Signed-off-by: ChiaEn Wu <[email protected]>
---
v7
- Add the second compatible string for 'mt6372'
- Add 'mediatek,bled-exponential-mode-enable' property for enable the
exponential mode of backlight brightness
- Add validation for the maximum value of 'default-brightness' and
'max-brightness'
---
.../leds/backlight/mediatek,mt6370-backlight.yaml | 121 +++++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 0000000..5533b65
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+ - ChiaEn Wu <[email protected]>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+ 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+ capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+ 16384 current steps (14 bits, only for MT6372) in exponential or linear
+ mapping curves.
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6370-backlight
+ - mediatek,mt6372-backlight
+
+ default-brightness:
+ minimum: 0
+
+ max-brightness:
+ minimum: 0
+
+ enable-gpios:
+ description: External backlight 'enable' pin
+ maxItems: 1
+
+ mediatek,bled-pwm-enable:
+ description: |
+ Enable external PWM input for backlight dimming
+ type: boolean
+
+ mediatek,bled-pwm-hys-enable:
+ description: |
+ Enable the backlight input-hysteresis for PWM mode
+ type: boolean
+
+ mediatek,bled-pwm-hys-input-th-steps:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [1, 4, 16, 64]
+ description: |
+ The selection of the upper and lower bounds threshold of backlight
+ PWM resolution. If we choose selection 64, the variation of PWM
+ resolution needs more than 64 steps.
+
+ mediatek,bled-ovp-shutdown:
+ description: |
+ Enable the backlight shutdown when OVP level triggered
+ type: boolean
+
+ mediatek,bled-ovp-microvolt:
+ enum: [17000000, 21000000, 25000000, 29000000]
+ description: |
+ Backlight OVP level selection.
+
+ mediatek,bled-ocp-shutdown:
+ description: |
+ Enable the backlight shutdown when OCP level triggerred.
+ type: boolean
+
+ mediatek,bled-ocp-microamp:
+ enum: [900000, 1200000, 1500000, 1800000]
+ description: |
+ Backlight OC level selection.
+
+ mediatek,bled-exponential-mode-enable:
+ description: |
+ Enable the exponential mode of backlight brightness. If this property
+ is not enabled, the default is to use linear mode.
+ type: boolean
+
+ mediatek,bled-channel-use:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ Backlight LED channel to be used.
+ Each bit mapping to:
+ - 0: CH4
+ - 1: CH3
+ - 2: CH2
+ - 3: CH1
+ minimum: 1
+ maximum: 15
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6372-backlight
+
+then:
+ properties:
+ default-brightness:
+ maximum: 16384
+
+ max-brightness:
+ maximum: 16384
+
+else:
+ properties:
+ default-brightness:
+ maximum: 2048
+
+ max-brightness:
+ maximum: 2048
+
+required:
+ - compatible
+ - mediatek,bled-channel-use
+
+additionalProperties: false
--
2.7.4