The Netmos parallel port 9901 was already supported but the device 9900 was
not. This patch adds the required settings for it and was successfully
tested with the Netmos device 9900.
Signed-off-by: Alexander Baehr <[email protected]>
---
drivers/parport/parport_pc.c | 4 ++++
1 file changed, 4 insertions(+)
Index: linux-5.19.0-rt7/drivers/parport/parport_pc.c
===================================================================
--- linux-5.19.0-rt7.orig/drivers/parport/parport_pc.c
+++ linux-5.19.0-rt7/drivers/parport/parport_pc.c
@@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards {
oxsemi_pcie_pport,
aks_0100,
mobility_pp,
+ netmos_9900,
netmos_9705,
netmos_9715,
netmos_9755,
@@ -2665,6 +2666,7 @@ static struct parport_pc_pci {
/* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } },
/* aks_0100 */ { 1, { { 0, -1 }, } },
/* mobility_pp */ { 1, { { 0, 1 }, } },
+ /* netmos_9900 */ { 1, { { 0, -1 }, } },
/* The netmos entries below are untested */
/* netmos_9705 */ { 1, { { 0, -1 }, } },
@@ -2746,6 +2748,8 @@ static const struct pci_device_id parpor
PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
/* NetMos communication controllers */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x2000, 0, 0, netmos_9900 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,