2022-08-09 17:30:12

by Amjad Ouled-Ameur

[permalink] [raw]
Subject: [PATCH 1/2] spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states

SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
pin biais when idle. Therefore define three pinctrl names:
- default: SPI pins are controlled by spi function.
- idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
by spi function.
- idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
by spi function.

Reported-by: Da Xue <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Amjad Ouled-Ameur <[email protected]>
---
.../bindings/spi/amlogic,meson-gx-spicc.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 50de0da42c13..10707a8216f5 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -43,6 +43,14 @@ properties:
minItems: 1
maxItems: 2

+ pinctrl-0:
+ minItems: 1
+
+ pinctrl-1:
+ maxItems: 1
+
+ pinctrl-names: true
+
if:
properties:
compatible:
@@ -69,6 +77,13 @@ else:
items:
- const: core

+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: idle-high
+ - const: idle-low
+
required:
- compatible
- reg
--
2.37.1


2022-09-27 08:37:44

by Neil Armstrong

[permalink] [raw]
Subject: Re: [PATCH 1/2] spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states

Hi,

On 09/08/2022 19:20, Amjad Ouled-Ameur wrote:
> SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
> pin biais when idle. Therefore define three pinctrl names:
> - default: SPI pins are controlled by spi function.
> - idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
> by spi function.
> - idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
> by spi function.
>
> Reported-by: Da Xue <[email protected]>
> Signed-off-by: Neil Armstrong <[email protected]>
> Signed-off-by: Amjad Ouled-Ameur <[email protected]>

Don't forget to CC [email protected] otherwise it won't be reviewed.

> ---
> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> index 50de0da42c13..10707a8216f5 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> @@ -43,6 +43,14 @@ properties:
> minItems: 1
> maxItems: 2
>
> + pinctrl-0:
> + minItems: 1
> +
> + pinctrl-1:
> + maxItems: 1
> +
> + pinctrl-names: true
> +
> if:
> properties:
> compatible:
> @@ -69,6 +77,13 @@ else:
> items:
> - const: core
>
> + pinctrl-names:
> + minItems: 1
> + items:
> + - const: default
> + - const: idle-high
> + - const: idle-low
> +
> required:
> - compatible
> - reg

2022-09-27 09:58:28

by Amjad Ouled-Ameur

[permalink] [raw]
Subject: Re: [PATCH 1/2] spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states

Hi Neil

On 9/27/22 10:29, Neil Armstrong wrote:
> Hi,
>
> On 09/08/2022 19:20, Amjad Ouled-Ameur wrote:
>> SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
>> pin biais when idle. Therefore define three pinctrl names:
>> - default: SPI pins are controlled by spi function.
>> - idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
>> by spi function.
>> - idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
>> by spi function.
>>
>> Reported-by: Da Xue <[email protected]>
>> Signed-off-by: Neil Armstrong <[email protected]>
>> Signed-off-by: Amjad Ouled-Ameur <[email protected]>
>
> Don't forget to CC [email protected] otherwise it won't be
> reviewed.

Sure, will do in V2.

Regards,

Amjad

>
>
>> ---
>>   .../bindings/spi/amlogic,meson-gx-spicc.yaml      | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> index 50de0da42c13..10707a8216f5 100644
>> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> @@ -43,6 +43,14 @@ properties:
>>       minItems: 1
>>       maxItems: 2
>>   +  pinctrl-0:
>> +    minItems: 1
>> +
>> +  pinctrl-1:
>> +    maxItems: 1
>> +
>> +  pinctrl-names: true
>> +
>>   if:
>>     properties:
>>       compatible:
>> @@ -69,6 +77,13 @@ else:
>>         items:
>>           - const: core
>>   +    pinctrl-names:
>> +      minItems: 1
>> +      items:
>> +        - const: default
>> +        - const: idle-high
>> +        - const: idle-low
>> +
>>   required:
>>     - compatible
>>     - reg