Add DT compatible strings for a combination of the 14N0600E variant of
the Avnet (MSC branded) SM2S-IMX8PLUS SoM on it's own and in combination
with the SM2-MB-EP1 carrier board.
Signed-off-by: Martyn Welch <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v2:
- New addition
Changes in v3:
- Switch to avnet vendor
- Shortened descriptive comment
Changes in v4:
- No changes
Changes in v5:
- No changes
Changes in v6:
- No changes
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7431579ab0e8..81d90dc83385 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -936,6 +936,13 @@ properties:
- toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules
- const: fsl,imx8mp
+ - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+ items:
+ - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+ - const: avnet,sm2s-imx8mp-14N0600E # 14N0600E variant of SM2S-IMX8PLUS SoM
+ - const: avnet,sm2s-imx8mp # SM2S-IMX8PLUS SoM
+ - const: fsl,imx8mp
+
- description: Engicam i.Core MX8M Plus SoM based boards
items:
- enum:
--
2.35.1
Add device trees for one of a number of MSC's (parent company, Avnet)
variants of the SM2S-IMX8PLUS system on module along with the compatible
SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use
the NXP i.MX8MP SoC and provide the SMARC module interface.
Signed-off-by: Martyn Welch <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v2
- Added compatibles
- Removed underscores from node names
- Make node names more generic
- Reorder properties
- Fix issues found by dtbs_check in these files
Changes in v3:
- Switched to avnet vendor string in compatibles
- Corrected patch description
Changes in v4:
- Switched from phy-reset-gpios to reset-gpios, removing duplication
- Removed unneeded sdma1 node
Changes in v5:
- SoM dts switched to dtsi, removing model and compatible entries
Changes in v6:
- Removed unneeded blank line
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mp-msc-sm2s-14N0600E.dtsi | 68 ++
.../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 52 ++
.../boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 812 ++++++++++++++++++
4 files changed, 933 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8bf7f7ecebaa..139c8b95c9c9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
new file mode 100644
index 000000000000..2f5cc013e8d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s.dtsi"
+
+/ {
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
+ };
+};
+
+&cpu_alert0 {
+ temperature = <95000>;
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+};
+
+&soc_alert0 {
+ temperature = <95000>;
+};
+
+&soc_crit0 {
+ temperature = <105000>;
+};
+
+&tca6424 {
+ gbe0-int-hog {
+ gpio-hog;
+ input;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ };
+
+ gbe1-int-hog {
+ gpio-hog;
+ input;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ };
+
+ cam2-rst-hog {
+ gpio-hog;
+ output-high;
+ gpios = <9 GPIO_ACTIVE_LOW>;
+ };
+
+ cam2-pwr-hog {
+ gpio-hog;
+ output-high;
+ gpios = <10 GPIO_ACTIVE_LOW>;
+ };
+
+ tpm-int-hog {
+ gpio-hog;
+ input;
+ gpios = <13 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-int-hog {
+ gpio-hog;
+ input;
+ gpios = <14 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
new file mode 100644
index 000000000000..470ff8e31e32
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s-14N0600E.dtsi"
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
+ compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
+ "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
+ "fsl,imx8mp";
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&flexcan2 {
+ status = "okay";
+};
+
+&usdhc2 {
+ no-1-8-v;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+ pinctrl_smarc_gpio: smarcgpiosgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */
+ <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x19>, /* GPIO1 */
+ <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19>, /* GPIO2 */
+ <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x19>, /* GPIO3 */
+ <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x19>, /* GPIO4 */
+ <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x19>, /* GPIO5 */
+ <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19>, /* GPIO6 */
+ <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x19>, /* GPIO7 */
+ <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x19>, /* GPIO8 */
+ <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19>, /* GPIO9 */
+ <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19>, /* GPIO10 */
+ <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19>, /* GPIO11 */
+ <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19>, /* GPIO12 */
+ <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19>; /* GPIO13 */
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
new file mode 100644
index 000000000000..72e7dfb0a77f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ aliases {
+ rtc0 = &sys_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reg_usb0_host_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_host_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_vbus>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb1_host_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_host_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+
+ reg_flexcan1_xceiver: regulator-flexcan1 {
+ compatible = "regulator-fixed";
+ regulator-name = "flexcan1-xceiver";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ reg_flexcan2_xceiver: regulator-flexcan2 {
+ compatible = "regulator-fixed";
+ regulator-name = "flexcan2-xceiver";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ lcd0_backlight: backlight-0 {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd0_backlight>;
+ pwms = <&pwm1 0 100000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ lcd1_backlight: backlight-1 {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd1_backlight>;
+ pwms = <&pwm2 0 100000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+ status = "okay";
+
+ led-sw {
+ label = "sw-led";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ extcon_usb0: extcon-usb0 {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_extcon>;
+ id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&vcc_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <&vcc_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <&vcc_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <&vcc_arm>;
+};
+
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ eee-broken-1000t;
+ reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ eee-broken-1000t;
+ reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ id_eeprom: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "disabled";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "disabled";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ clock-frequency = <400000>;
+ status = "disabled";
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ clock-frequency = <400000>;
+ status = "disabled";
+};
+
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tca6424: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tca6424>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
+ "gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
+ "PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
+ "wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
+ "gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
+ "CHARGER_PRSNT#";
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ dsi_lvds_bridge: bridge@2d {
+ compatible = "ti,sn65dsi83";
+ reg = <0x2d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_bridge>;
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ pmic: pmic@30 {
+ compatible = "ricoh,rn5t567";
+ reg = <0x30>;
+ interrupt-parent = <&tca6424>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ DCDC1 {
+ regulator-name = "VCC_SOC";
+ regulator-always-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ };
+ DCDC2 {
+ regulator-name = "VCC_DRAM";
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ vcc_arm: DCDC3 {
+ regulator-name = "VCC_ARM";
+ regulator-always-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ };
+ DCDC4 {
+ regulator-name = "VCC_1V8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ LDO1 {
+ regulator-name = "VCC_LDO1_2V5";
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ LDO2 {
+ regulator-name = "VCC_LDO2_1V8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ LDO3 {
+ regulator-name = "VCC_ETH_2V5";
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ LDO4 {
+ regulator-name = "VCC_DDR4_2V5";
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ LDO5 {
+ regulator-name = "VCC_LDO5_1V8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ LDORTC1 {
+ regulator-name = "VCC_SNVS_1V8";
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ LDORTC2 {
+ regulator-name = "VCC_SNVS_3V3";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ sys_rtc: rtc@32 {
+ compatible = "ricoh,r2221tl";
+ reg = <0x32>;
+ interrupt-parent = <&tca6424>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ tmp_sensor: temperature-sensor@71 {
+ compatible = "ti,tmp103";
+ reg = <0x71>;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_flexcan1_xceiver>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_flexcan2_xceiver>;
+ status = "disabled";
+};
+
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ qspi_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "disabled";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "disabled";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usb0_host_vbus>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_usb1_host_vbus>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ extcon = <&extcon_usb0>;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82>,
+ <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82>,
+ <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82>,
+ <MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x40000>,
+ <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x40000>;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82>,
+ <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82>,
+ <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82>,
+ <MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000>,
+ <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x40000>;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3>,
+ <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3>,
+ <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91>,
+ <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91>,
+ <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91>,
+ <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91>,
+ <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91>,
+ <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91>,
+ <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f>,
+ <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f>,
+ <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>,
+ <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>,
+ <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>,
+ <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>,
+ <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>,
+ <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>,
+ <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>,
+ <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>,
+ <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f>,
+ <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f>,
+ <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f>,
+ <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f>,
+ <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f>,
+ <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f>;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154>,
+ <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154>;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154>,
+ <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154>;
+ };
+
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2>,
+ <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>,
+ <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x19>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3>;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3>;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3>;
+ };
+
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3>;
+ };
+
+ pinctrl_i2c6: i2c6grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3>;
+ };
+
+ pinctrl_lcd0_backlight: lcd0-backlightgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x41>;
+ };
+
+ pinctrl_lcd1_backlight: lcd1-backlightgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x41>;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x19>;
+ };
+
+ pinctrl_lvds_bridge: lvds-bridgegrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x41>;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116>;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x116>;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x116>;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116>;
+ };
+
+ pinctrl_tca6424: tca6424grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x41>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49>,
+ <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x1c4>,
+ <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x1c4>,
+ <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49>,
+ <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>,
+ <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x1c4>,
+ <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49>,
+ <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49>;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49>,
+ <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49>;
+ };
+
+ pinctrl_usb0_extcon: usb0-extcongrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x19>;
+ };
+
+ pinctrl_usb0_vbus: usb0-vbusgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19>;
+ };
+
+ pinctrl_usb1_vbus: usb1-vbusgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19>;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4>,
+ <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41>;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190>;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194>;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6>;
+ };
+};
--
2.35.1
On Tue, Aug 16, 2022 at 04:43:05PM +0100, Martyn Welch wrote:
> Add device trees for one of a number of MSC's (parent company, Avnet)
> variants of the SM2S-IMX8PLUS system on module along with the compatible
> SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use
> the NXP i.MX8MP SoC and provide the SMARC module interface.
>
> Signed-off-by: Martyn Welch <[email protected]>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
> ---
>
> Changes in v2
> - Added compatibles
> - Removed underscores from node names
> - Make node names more generic
> - Reorder properties
> - Fix issues found by dtbs_check in these files
>
> Changes in v3:
> - Switched to avnet vendor string in compatibles
> - Corrected patch description
>
> Changes in v4:
> - Switched from phy-reset-gpios to reset-gpios, removing duplication
> - Removed unneeded sdma1 node
>
> Changes in v5:
> - SoM dts switched to dtsi, removing model and compatible entries
>
> Changes in v6:
> - Removed unneeded blank line
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../freescale/imx8mp-msc-sm2s-14N0600E.dtsi | 68 ++
> .../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 52 ++
> .../boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 812 ++++++++++++++++++
> 4 files changed, 933 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 8bf7f7ecebaa..139c8b95c9c9 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
> new file mode 100644
> index 000000000000..2f5cc013e8d6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
> @@ -0,0 +1,68 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Avnet Embedded GmbH
> + */
> +/dts-v1/;
> +
> +#include "imx8mp-msc-sm2s.dtsi"
> +
> +/ {
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
> + };
> +};
> +
> +&cpu_alert0 {
> + temperature = <95000>;
> +};
> +
> +&cpu_crit0 {
> + temperature = <105000>;
> +};
> +
> +&soc_alert0 {
> + temperature = <95000>;
> +};
> +
> +&soc_crit0 {
> + temperature = <105000>;
> +};
> +
> +&tca6424 {
> + gbe0-int-hog {
> + gpio-hog;
> + input;
> + gpios = <3 GPIO_ACTIVE_LOW>;
> + };
> +
> + gbe1-int-hog {
> + gpio-hog;
> + input;
> + gpios = <4 GPIO_ACTIVE_LOW>;
> + };
> +
> + cam2-rst-hog {
> + gpio-hog;
> + output-high;
> + gpios = <9 GPIO_ACTIVE_LOW>;
> + };
> +
> + cam2-pwr-hog {
> + gpio-hog;
> + output-high;
> + gpios = <10 GPIO_ACTIVE_LOW>;
> + };
> +
> + tpm-int-hog {
> + gpio-hog;
> + input;
> + gpios = <13 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi-int-hog {
> + gpio-hog;
> + input;
> + gpios = <14 GPIO_ACTIVE_LOW>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> new file mode 100644
> index 000000000000..470ff8e31e32
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Avnet Embedded GmbH
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp-msc-sm2s-14N0600E.dtsi"
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
> + compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
> + "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
> + "fsl,imx8mp";
> +};
> +
> +&flexcan1 {
> + status = "okay";
> +};
> +
> +&flexcan2 {
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + no-1-8-v;
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_smarc_gpio>;
> +
> + pinctrl_smarc_gpio: smarcgpiosgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */
> + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x19>, /* GPIO1 */
> + <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19>, /* GPIO2 */
> + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x19>, /* GPIO3 */
> + <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x19>, /* GPIO4 */
> + <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x19>, /* GPIO5 */
> + <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19>, /* GPIO6 */
> + <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x19>, /* GPIO7 */
> + <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x19>, /* GPIO8 */
> + <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19>, /* GPIO9 */
> + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19>, /* GPIO10 */
> + <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19>, /* GPIO11 */
> + <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19>, /* GPIO12 */
> + <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19>; /* GPIO13 */
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> new file mode 100644
> index 000000000000..72e7dfb0a77f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> @@ -0,0 +1,812 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Avnet Embedded GmbH
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp.dtsi"
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +/ {
> + aliases {
> + rtc0 = &sys_rtc;
> + rtc1 = &snvs_rtc;
> + };
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + reg_usb0_host_vbus: regulator-usb0-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb0_host_vbus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0_vbus>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usb1_host_vbus: regulator-usb1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb1_host_vbus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb1_vbus>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + startup-delay-us = <100>;
> + off-on-delay-us = <12000>;
> + };
> +
> + reg_flexcan1_xceiver: regulator-flexcan1 {
> + compatible = "regulator-fixed";
> + regulator-name = "flexcan1-xceiver";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
The property makes no sense for a fixed regulator without GPIO control.
> + };
> +
> + reg_flexcan2_xceiver: regulator-flexcan2 {
> + compatible = "regulator-fixed";
> + regulator-name = "flexcan2-xceiver";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + };
> +
> + lcd0_backlight: backlight-0 {
> + compatible = "pwm-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd0_backlight>;
> + pwms = <&pwm1 0 100000 0>;
> + brightness-levels = <0 255>;
> + num-interpolated-steps = <255>;
> + default-brightness-level = <255>;
> + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> + };
> +
> + lcd1_backlight: backlight-1 {
> + compatible = "pwm-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd1_backlight>;
> + pwms = <&pwm2 0 100000 0>;
> + brightness-levels = <0 255>;
> + num-interpolated-steps = <255>;
> + default-brightness-level = <255>;
> + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> + status = "okay";
> +
> + led-sw {
> + label = "sw-led";
> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + extcon_usb0: extcon-usb0 {
> + compatible = "linux,extcon-usb-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0_extcon>;
> + id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <&vcc_arm>;
> +};
> +
> +&A53_1 {
> + cpu-supply = <&vcc_arm>;
> +};
> +
> +&A53_2 {
> + cpu-supply = <&vcc_arm>;
> +};
> +
> +&A53_3 {
> + cpu-supply = <&vcc_arm>;
> +};
> +
> +&ecspi1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
> +};
> +
> +&ecspi2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
> +};
> +
> +&eqos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + eee-broken-1000t;
> + reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <1000>;
> + reset-deassert-us = <1000>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy1>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + eee-broken-1000t;
> + reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <1000>;
> + reset-deassert-us = <1000>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + id_eeprom: eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + clock-frequency = <400000>;
> + status = "disabled";
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + clock-frequency = <400000>;
> + status = "disabled";
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + clock-frequency = <400000>;
> + status = "disabled";
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c5>;
> + clock-frequency = <400000>;
> + status = "disabled";
> +};
> +
> +&i2c6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c6>;
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + tca6424: gpio@22 {
> + compatible = "ti,tca6424";
> + reg = <0x22>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tca6424>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
> + "gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
> + "PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
> + "wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
> + "gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
> + "CHARGER_PRSNT#";
> + interrupt-parent = <&gpio1>;
> + interrupts = <9 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + dsi_lvds_bridge: bridge@2d {
> + compatible = "ti,sn65dsi83";
> + reg = <0x2d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lvds_bridge>;
> + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> + };
> +
> + pmic: pmic@30 {
> + compatible = "ricoh,rn5t567";
> + reg = <0x30>;
> + interrupt-parent = <&tca6424>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + DCDC1 {
> + regulator-name = "VCC_SOC";
> + regulator-always-on;
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + };
Have a newline between nodes.
Shawn
> + DCDC2 {
> + regulator-name = "VCC_DRAM";
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + };
> + vcc_arm: DCDC3 {
> + regulator-name = "VCC_ARM";
> + regulator-always-on;
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + };
> + DCDC4 {
> + regulator-name = "VCC_1V8";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + LDO1 {
> + regulator-name = "VCC_LDO1_2V5";
> + regulator-always-on;
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + };
> + LDO2 {
> + regulator-name = "VCC_LDO2_1V8";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + LDO3 {
> + regulator-name = "VCC_ETH_2V5";
> + regulator-always-on;
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + };
> + LDO4 {
> + regulator-name = "VCC_DDR4_2V5";
> + regulator-always-on;
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + };
> + LDO5 {
> + regulator-name = "VCC_LDO5_1V8";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + LDORTC1 {
> + regulator-name = "VCC_SNVS_1V8";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + LDORTC2 {
> + regulator-name = "VCC_SNVS_3V3";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> +
> + sys_rtc: rtc@32 {
> + compatible = "ricoh,r2221tl";
> + reg = <0x32>;
> + interrupt-parent = <&tca6424>;
> + interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> + tmp_sensor: temperature-sensor@71 {
> + compatible = "ti,tmp103";
> + reg = <0x71>;
> + };
> +};
> +
> +&flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + xceiver-supply = <®_flexcan1_xceiver>;
> + status = "disabled";
> +};
> +
> +&flexcan2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + xceiver-supply = <®_flexcan2_xceiver>;
> + status = "disabled";
> +};
> +
> +&flexspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexspi0>;
> + status = "okay";
> +
> + qspi_flash: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <80000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "disabled";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "disabled";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "disabled";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> + status = "disabled";
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "disabled";
> +};
> +
> +&usb3_phy0 {
> + vbus-supply = <®_usb0_host_vbus>;
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + vbus-supply = <®_usb1_host_vbus>;
> + status = "okay";
> +};
> +
> +&usb3_0 {
> + status = "okay";
> +};
> +
> +&usb3_1 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + dr_mode = "otg";
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> + extcon = <&extcon_usb0>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
> + assigned-clock-rates = <400000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> + bus-width = <4>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
> + assigned-clock-rates = <400000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82>,
> + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82>,
> + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82>,
> + <MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x40000>,
> + <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x40000>;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82>,
> + <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82>,
> + <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82>,
> + <MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000>,
> + <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x40000>;
> + };
> +
> + pinctrl_eqos: eqosgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3>,
> + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3>,
> + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91>,
> + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91>,
> + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91>,
> + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91>,
> + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91>,
> + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91>,
> + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f>,
> + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f>,
> + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f>,
> + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f>,
> + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f>,
> + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f>;
> + };
> +
> + pinctrl_fec: fecgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>,
> + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>,
> + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>,
> + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>,
> + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>,
> + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>,
> + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>,
> + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>,
> + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f>,
> + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f>,
> + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f>,
> + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f>,
> + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f>,
> + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f>;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154>,
> + <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154>;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154>,
> + <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154>;
> + };
> +
> + pinctrl_flexspi0: flexspi0grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2>,
> + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>,
> + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>,
> + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>,
> + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>,
> + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>,
> + <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x19>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3>;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3>;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3>;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3>;
> + };
> +
> + pinctrl_i2c5: i2c5grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3>;
> + };
> +
> + pinctrl_i2c6: i2c6grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3>,
> + <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3>;
> + };
> +
> + pinctrl_lcd0_backlight: lcd0-backlightgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x41>;
> + };
> +
> + pinctrl_lcd1_backlight: lcd1-backlightgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x41>;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x19>;
> + };
> +
> + pinctrl_lvds_bridge: lvds-bridgegrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x41>;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116>;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x116>;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x116>;
> + };
> +
> + pinctrl_pwm4: pwm4grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116>;
> + };
> +
> + pinctrl_tca6424: tca6424grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x41>;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49>,
> + <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49>;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x1c4>,
> + <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x1c4>,
> + <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49>,
> + <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49>;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>,
> + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x1c4>,
> + <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49>,
> + <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49>;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49>,
> + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49>;
> + };
> +
> + pinctrl_usb0_extcon: usb0-extcongrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x19>;
> + };
> +
> + pinctrl_usb0_vbus: usb0-vbusgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19>;
> + };
> +
> + pinctrl_usb1_vbus: usb1-vbusgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19>;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4>,
> + <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4>;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190>,
> + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0>,
> + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0>,
> + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0>,
> + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0>,
> + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0>,
> + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
> + };
> +
> + pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41>;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
> + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
> + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
> + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
> + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
> + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
> + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196>,
> + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6>,
> + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6>,
> + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6>,
> + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6>,
> + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6>,
> + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1>;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins =
> + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190>,
> + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0>,
> + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0>,
> + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0>,
> + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0>,
> + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0>,
> + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0>,
> + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0>,
> + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0>,
> + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0>,
> + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190>;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
> + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
> + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
> + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
> + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
> + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
> + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
> + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
> + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
> + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
> + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194>;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196>,
> + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6>,
> + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6>,
> + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6>,
> + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6>,
> + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6>,
> + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6>,
> + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6>,
> + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6>,
> + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6>,
> + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196>;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins =
> + <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6>;
> + };
> +};
> --
> 2.35.1
>
On Mon, 2022-08-22 at 11:27 +0800, Shawn Guo wrote:
> On Tue, Aug 16, 2022 at 04:43:05PM +0100, Martyn Welch wrote:
> > Add device trees for one of a number of MSC's (parent company,
> > Avnet)
> > variants of the SM2S-IMX8PLUS system on module along with the
> > compatible
> > SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of
> > SoMs use
> > the NXP i.MX8MP SoC and provide the SMARC module interface.
> >
> > Signed-off-by: Martyn Welch <[email protected]>
> > Reviewed-by: Krzysztof Kozlowski <[email protected]>
> > ---
> >
> > Changes in v2
> > - Added compatibles
> > - Removed underscores from node names
> > - Make node names more generic
> > - Reorder properties
> > - Fix issues found by dtbs_check in these files
> >
> > Changes in v3:
> > - Switched to avnet vendor string in compatibles
> > - Corrected patch description
> >
> > Changes in v4:
> > - Switched from phy-reset-gpios to reset-gpios, removing
> > duplication
> > - Removed unneeded sdma1 node
> >
> > Changes in v5:
> > - SoM dts switched to dtsi, removing model and compatible entries
> >
> > Changes in v6:
> > - Removed unneeded blank line
> >
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > .../freescale/imx8mp-msc-sm2s-14N0600E.dtsi | 68 ++
> > .../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 52 ++
> > .../boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 812
> > ++++++++++++++++++
> > 4 files changed, 933 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
> > 14N0600E.dtsi
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
> > ep1.dts
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-
> > sm2s.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 8bf7f7ecebaa..139c8b95c9c9 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-
> > gw7902.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
> > 14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
> > 14N0600E.dtsi
> > new file mode 100644
> > index 000000000000..2f5cc013e8d6
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
> > @@ -0,0 +1,68 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2022 Avnet Embedded GmbH
> > + */
> > +/dts-v1/;
> > +
> > +#include "imx8mp-msc-sm2s.dtsi"
> > +
> > +/ {
> > + memory@40000000 {
> > + device_type = "memory";
> > + reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB
> > */
> > + };
> > +};
> > +
> > +&cpu_alert0 {
> > + temperature = <95000>;
> > +};
> > +
> > +&cpu_crit0 {
> > + temperature = <105000>;
> > +};
> > +
> > +&soc_alert0 {
> > + temperature = <95000>;
> > +};
> > +
> > +&soc_crit0 {
> > + temperature = <105000>;
> > +};
> > +
> > +&tca6424 {
> > + gbe0-int-hog {
> > + gpio-hog;
> > + input;
> > + gpios = <3 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + gbe1-int-hog {
> > + gpio-hog;
> > + input;
> > + gpios = <4 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cam2-rst-hog {
> > + gpio-hog;
> > + output-high;
> > + gpios = <9 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cam2-pwr-hog {
> > + gpio-hog;
> > + output-high;
> > + gpios = <10 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + tpm-int-hog {
> > + gpio-hog;
> > + input;
> > + gpios = <13 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + wifi-int-hog {
> > + gpio-hog;
> > + input;
> > + gpios = <14 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > new file mode 100644
> > index 000000000000..470ff8e31e32
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > @@ -0,0 +1,52 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2022 Avnet Embedded GmbH
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx8mp-msc-sm2s-14N0600E.dtsi"
> > +#include <dt-bindings/clock/imx8mp-clock.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > + model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-
> > QC6-14N0600E SoM";
> > + compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
> > + "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-
> > imx8mp",
> > + "fsl,imx8mp";
> > +};
> > +
> > +&flexcan1 {
> > + status = "okay";
> > +};
> > +
> > +&flexcan2 {
> > + status = "okay";
> > +};
> > +
> > +&usdhc2 {
> > + no-1-8-v;
> > +};
> > +
> > +&iomuxc {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_smarc_gpio>;
> > +
> > + pinctrl_smarc_gpio: smarcgpiosgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x1
> > 9>, /* GPIO0 */
> > + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1
> > 9>, /* GPIO1 */
> > + <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x1
> > 9>, /* GPIO2 */
> > + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1
> > 9>, /* GPIO3 */
> > + <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1
> > 9>, /* GPIO4 */
> > + <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1
> > 9>, /* GPIO5 */
> > + <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x1
> > 9>, /* GPIO6 */
> > + <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1
> > 9>, /* GPIO7 */
> > + <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x1
> > 9>, /* GPIO8 */
> > + <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x1
> > 9>, /* GPIO9 */
> > + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1
> > 9>, /* GPIO10 */
> > + <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1
> > 9>, /* GPIO11 */
> > + <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1
> > 9>, /* GPIO12 */
> > + <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x1
> > 9>; /* GPIO13 */
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> > new file mode 100644
> > index 000000000000..72e7dfb0a77f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
> > @@ -0,0 +1,812 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2022 Avnet Embedded GmbH
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx8mp.dtsi"
> > +#include <dt-bindings/net/ti-dp83867.h>
> > +
> > +/ {
> > + aliases {
> > + rtc0 = &sys_rtc;
> > + rtc1 = &snvs_rtc;
> > + };
> > +
> > + chosen {
> > + stdout-path = &uart2;
> > + };
> > +
> > + reg_usb0_host_vbus: regulator-usb0-vbus {
> > + compatible = "regulator-fixed";
> > + regulator-name = "usb0_host_vbus";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb0_vbus>;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > + reg_usb1_host_vbus: regulator-usb1-vbus {
> > + compatible = "regulator-fixed";
> > + regulator-name = "usb1_host_vbus";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb1_vbus>;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > + reg_usdhc2_vmmc: regulator-usdhc2 {
> > + compatible = "regulator-fixed";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
> > + regulator-name = "VSD_3V3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + startup-delay-us = <100>;
> > + off-on-delay-us = <12000>;
> > + };
> > +
> > + reg_flexcan1_xceiver: regulator-flexcan1 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "flexcan1-xceiver";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + enable-active-high;
>
> The property makes no sense for a fixed regulator without GPIO
> control.
>
Agreed, sorry, completely missed that.
> > + };
> > +
> > + reg_flexcan2_xceiver: regulator-flexcan2 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "flexcan2-xceiver";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + enable-active-high;
> > + };
> > +
> > + lcd0_backlight: backlight-0 {
> > + compatible = "pwm-backlight";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcd0_backlight>;
> > + pwms = <&pwm1 0 100000 0>;
> > + brightness-levels = <0 255>;
> > + num-interpolated-steps = <255>;
> > + default-brightness-level = <255>;
> > + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + lcd1_backlight: backlight-1 {
> > + compatible = "pwm-backlight";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcd1_backlight>;
> > + pwms = <&pwm2 0 100000 0>;
> > + brightness-levels = <0 255>;
> > + num-interpolated-steps = <255>;
> > + default-brightness-level = <255>;
> > + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_leds>;
> > + status = "okay";
> > +
> > + led-sw {
> > + label = "sw-led";
> > + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> > + default-state = "off";
> > + linux,default-trigger = "heartbeat";
> > + };
> > + };
> > +
> > + extcon_usb0: extcon-usb0 {
> > + compatible = "linux,extcon-usb-gpio";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb0_extcon>;
> > + id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> > + };
> > +};
> > +
> > +&A53_0 {
> > + cpu-supply = <&vcc_arm>;
> > +};
> > +
> > +&A53_1 {
> > + cpu-supply = <&vcc_arm>;
> > +};
> > +
> > +&A53_2 {
> > + cpu-supply = <&vcc_arm>;
> > +};
> > +
> > +&A53_3 {
> > + cpu-supply = <&vcc_arm>;
> > +};
> > +
> > +&ecspi1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi1>;
> > + cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
> > +};
> > +
> > +&ecspi2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2>;
> > + cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
> > +};
> > +
> > +&eqos {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_eqos>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy0>;
> > + status = "okay";
> > +
> > + mdio {
> > + compatible = "snps,dwmac-mdio";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy0: ethernet-phy@1 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <1>;
> > + eee-broken-1000t;
> > + reset-gpios = <&tca6424 16
> > GPIO_ACTIVE_LOW>;
> > + reset-assert-us = <1000>;
> > + reset-deassert-us = <1000>;
> > + ti,rx-internal-delay =
> > <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,tx-internal-delay =
> > <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,fifo-depth =
> > <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > + ti,clk-output-sel =
> > <DP83867_CLK_O_SEL_OFF>;
> > + };
> > + };
> > +};
> > +
> > +&fec {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_fec>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy1>;
> > + fsl,magic-packet;
> > + status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy1: ethernet-phy@1 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <1>;
> > + eee-broken-1000t;
> > + reset-gpios = <&tca6424 17
> > GPIO_ACTIVE_LOW>;
> > + reset-assert-us = <1000>;
> > + reset-deassert-us = <1000>;
> > + ti,rx-internal-delay =
> > <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,tx-internal-delay =
> > <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,fifo-depth =
> > <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > + ti,clk-output-sel =
> > <DP83867_CLK_O_SEL_OFF>;
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + id_eeprom: eeprom@50 {
> > + compatible = "atmel,24c64";
> > + reg = <0x50>;
> > + pagesize = <32>;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c2>;
> > + clock-frequency = <400000>;
> > + status = "disabled";
> > +};
> > +
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3>;
> > + clock-frequency = <400000>;
> > + status = "disabled";
> > +};
> > +
> > +&i2c4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c4>;
> > + clock-frequency = <400000>;
> > + status = "disabled";
> > +};
> > +
> > +&i2c5 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c5>;
> > + clock-frequency = <400000>;
> > + status = "disabled";
> > +};
> > +
> > +&i2c6 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c6>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + tca6424: gpio@22 {
> > + compatible = "ti,tca6424";
> > + reg = <0x22>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_tca6424>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#",
> > "BOOT_SEL2#",
> > + "gbe0_int", "gbe1_int", "pmic_int",
> > "rtc_int", "lvds_int",
> > + "PCIE_WAKE#", "cam2_rst", "cam2_pwr",
> > "SLEEP#",
> > + "wifi_pd", "tpm_int", "wifi_int",
> > "PCIE_A_RST#",
> > + "gbe0_rst", "gbe1_rst", "LID#", "BATLOW#",
> > "CHARGING#",
> > + "CHARGER_PRSNT#";
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <9 IRQ_TYPE_EDGE_RISING>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + };
> > +
> > + dsi_lvds_bridge: bridge@2d {
> > + compatible = "ti,sn65dsi83";
> > + reg = <0x2d>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lvds_bridge>;
> > + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pmic: pmic@30 {
> > + compatible = "ricoh,rn5t567";
> > + reg = <0x30>;
> > + interrupt-parent = <&tca6424>;
> > + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> > +
> > + regulators {
> > + DCDC1 {
> > + regulator-name = "VCC_SOC";
> > + regulator-always-on;
> > + regulator-min-microvolt = <950000>;
> > + regulator-max-microvolt = <950000>;
> > + };
>
> Have a newline between nodes.
>
ack.
> Shawn
>
> > + DCDC2 {
> > + regulator-name = "VCC_DRAM";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <1100000>;
> > + regulator-max-microvolt =
> > <1100000>;
> > + };
> > + vcc_arm: DCDC3 {
> > + regulator-name = "VCC_ARM";
> > + regulator-always-on;
> > + regulator-min-microvolt = <950000>;
> > + regulator-max-microvolt = <950000>;
> > + };
> > + DCDC4 {
> > + regulator-name = "VCC_1V8";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <1800000>;
> > + regulator-max-microvolt =
> > <1800000>;
> > + };
> > + LDO1 {
> > + regulator-name = "VCC_LDO1_2V5";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <2500000>;
> > + regulator-max-microvolt =
> > <2500000>;
> > + };
> > + LDO2 {
> > + regulator-name = "VCC_LDO2_1V8";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <1800000>;
> > + regulator-max-microvolt =
> > <1800000>;
> > + };
> > + LDO3 {
> > + regulator-name = "VCC_ETH_2V5";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <2500000>;
> > + regulator-max-microvolt =
> > <2500000>;
> > + };
> > + LDO4 {
> > + regulator-name = "VCC_DDR4_2V5";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <2500000>;
> > + regulator-max-microvolt =
> > <2500000>;
> > + };
> > + LDO5 {
> > + regulator-name = "VCC_LDO5_1V8";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <1800000>;
> > + regulator-max-microvolt =
> > <1800000>;
> > + };
> > + LDORTC1 {
> > + regulator-name = "VCC_SNVS_1V8";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <1800000>;
> > + regulator-max-microvolt =
> > <1800000>;
> > + };
> > + LDORTC2 {
> > + regulator-name = "VCC_SNVS_3V3";
> > + regulator-always-on;
> > + regulator-min-microvolt =
> > <3300000>;
> > + regulator-max-microvolt =
> > <3300000>;
> > + };
> > + };
> > + };
> > +
> > + sys_rtc: rtc@32 {
> > + compatible = "ricoh,r2221tl";
> > + reg = <0x32>;
> > + interrupt-parent = <&tca6424>;
> > + interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
> > + };
> > +
> > + tmp_sensor: temperature-sensor@71 {
> > + compatible = "ti,tmp103";
> > + reg = <0x71>;
> > + };
> > +};
> > +
> > +&flexcan1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan1>;
> > + xceiver-supply = <®_flexcan1_xceiver>;
> > + status = "disabled";
> > +};
> > +
> > +&flexcan2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan2>;
> > + xceiver-supply = <®_flexcan2_xceiver>;
> > + status = "disabled";
> > +};
> > +
> > +&flexspi {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexspi0>;
> > + status = "okay";
> > +
> > + qspi_flash: flash@0 {
> > + compatible = "jedec,spi-nor";
> > + reg = <0>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + spi-max-frequency = <80000000>;
> > + spi-tx-bus-width = <4>;
> > + spi-rx-bus-width = <4>;
> > + };
> > +};
> > +
> > +&pwm1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm1>;
> > + status = "disabled";
> > +};
> > +
> > +&pwm2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm2>;
> > + status = "disabled";
> > +};
> > +
> > +&pwm3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm3>;
> > + status = "disabled";
> > +};
> > +
> > +&pwm4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm4>;
> > + status = "disabled";
> > +};
> > +
> > +&snvs_pwrkey {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1>;
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart2>;
> > + uart-has-rtscts;
> > + status = "okay";
> > +};
> > +
> > +&uart3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart3>;
> > + uart-has-rtscts;
> > + status = "okay";
> > +};
> > +
> > +&uart4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart4>;
> > + status = "disabled";
> > +};
> > +
> > +&usb3_phy0 {
> > + vbus-supply = <®_usb0_host_vbus>;
> > + status = "okay";
> > +};
> > +
> > +&usb3_phy1 {
> > + vbus-supply = <®_usb1_host_vbus>;
> > + status = "okay";
> > +};
> > +
> > +&usb3_0 {
> > + status = "okay";
> > +};
> > +
> > +&usb3_1 {
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_0 {
> > + dr_mode = "otg";
> > + hnp-disable;
> > + srp-disable;
> > + adp-disable;
> > + extcon = <&extcon_usb0>;
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_1 {
> > + dr_mode = "host";
> > + status = "okay";
> > +};
> > +
> > +&usdhc2 {
> > + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
> > + assigned-clock-rates = <400000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
> > <&pinctrl_usdhc2_gpio>;
> > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
> > <&pinctrl_usdhc2_gpio>;
> > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> > + bus-width = <4>;
> > + vmmc-supply = <®_usdhc2_vmmc>;
> > + status = "okay";
> > +};
> > +
> > +&usdhc3 {
> > + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
> > + assigned-clock-rates = <400000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc3>;
> > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> > + bus-width = <8>;
> > + non-removable;
> > + status = "okay";
> > +};
> > +
> > +&wdog1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdog>;
> > + fsl,ext-reset-output;
> > + status = "okay";
> > +};
> > +
> > +&iomuxc {
> > + pinctrl_ecspi1: ecspi1grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0
> > 0x40000>,
> > + <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08
> > 0x40000>;
> > + };
> > +
> > + pinctrl_ecspi2: ecspi2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK
> > 0x82>,
> > + <MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0
> > 0x40000>,
> > + <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09
> > 0x40000>;
> > + };
> > +
> > + pinctrl_eqos: eqosgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
> > 0x3>,
> > + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
> > 0x3>,
> > + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
> > 0x91>,
> > + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
> > 0x91>,
> > + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2
> > 0x91>,
> > + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3
> > 0x91>,
> > + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_
> > GENERATE_RX_CLK 0x91>,
> > + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_R
> > X_CTL 0x91>,
> > + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
> > 0x1f>,
> > + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
> > 0x1f>,
> > + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2
> > 0x1f>,
> > + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3
> > 0x1f>,
> > + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_T
> > X_CTL 0x1f>,
> > + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_
> > GENERATE_TX_CLK 0x1f>;
> > + };
> > +
> > + pinctrl_fec: fecgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC
> > 0x3>,
> > + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO
> > 0x3>,
> > + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL
> > 0x91>,
> > + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0
> > 0x1f>,
> > + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1
> > 0x1f>,
> > + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2
> > 0x1f>,
> > + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3
> > 0x1f>,
> > + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL
> > 0x1f>,
> > + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC
> > 0x1f>;
> > + };
> > +
> > + pinctrl_flexcan1: flexcan1grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX
> > 0x154>,
> > + <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX
> > 0x154>;
> > + };
> > +
> > + pinctrl_flexcan2: flexcan2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX
> > 0x154>,
> > + <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX
> > 0x154>;
> > + };
> > +
> > + pinctrl_flexspi0: flexspi0grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK
> > 0x1c2>,
> > + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B
> > 0x82>,
> > + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00
> > 0x82>,
> > + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01
> > 0x82>,
> > + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02
> > 0x82>,
> > + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03
> > 0x82>,
> > + <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14
> > 0x19>;
> > + };
> > +
> > + pinctrl_i2c1: i2c1grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_i2c2: i2c2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_i2c3: i2c3grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_i2c4: i2c4grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_i2c5: i2c5grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_i2c6: i2c6grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL
> > 0x400001c3>,
> > + <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA
> > 0x400001c3>;
> > + };
> > +
> > + pinctrl_lcd0_backlight: lcd0-backlightgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05
> > 0x41>;
> > + };
> > +
> > + pinctrl_lcd1_backlight: lcd1-backlightgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06
> > 0x41>;
> > + };
> > +
> > + pinctrl_leds: ledsgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08
> > 0x19>;
> > + };
> > +
> > + pinctrl_lvds_bridge: lvds-bridgegrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
> > 0x41>;
> > + };
> > +
> > + pinctrl_pwm1: pwm1grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT
> > 0x116>;
> > + };
> > +
> > + pinctrl_pwm2: pwm2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT
> > 0x116>;
> > + };
> > +
> > + pinctrl_pwm3: pwm3grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT
> > 0x116>;
> > + };
> > +
> > + pinctrl_pwm4: pwm4grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT
> > 0x116>;
> > + };
> > +
> > + pinctrl_tca6424: tca6424grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
> > 0x41>;
> > + };
> > +
> > + pinctrl_uart1: uart1grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX
> > 0x49>,
> > + <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX
> > 0x49>;
> > + };
> > +
> > + pinctrl_uart2: uart2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06
> > 0x1c4>,
> > + <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07
> > 0x1c4>,
> > + <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX
> > 0x49>,
> > + <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX
> > 0x49>;
> > + };
> > +
> > + pinctrl_uart3: uart3grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10
> > 0x1c4>,
> > + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11
> > 0x1c4>,
> > + <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX
> > 0x49>,
> > + <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX
> > 0x49>;
> > + };
> > +
> > + pinctrl_uart4: uart4grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX
> > 0x49>,
> > + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX
> > 0x49>;
> > + };
> > +
> > + pinctrl_usb0_extcon: usb0-extcongrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
> > 0x19>;
> > + };
> > +
> > + pinctrl_usb0_vbus: usb0-vbusgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12
> > 0x19>;
> > + };
> > +
> > + pinctrl_usb1_vbus: usb1-vbusgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14
> > 0x19>;
> > + };
> > +
> > + pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12
> > 0x1c4>,
> > + <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20
> > 0x1c4>;
> > + };
> > +
> > + pinctrl_usdhc2: usdhc2grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
> > 0x190>,
> > + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
> > 0x1d0>,
> > + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
> > 0x1d0>,
> > + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
> > 0x1d0>,
> > + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
> > 0x1d0>,
> > + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
> > 0x1d0>,
> > + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT
> > 0xc1>;
> > + };
> > +
> > + pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19
> > 0x41>;
> > + };
> > +
> > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
> > 0x194>,
> > + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
> > 0x1d4>,
> > + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
> > 0x1d4>,
> > + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
> > 0x1d4>,
> > + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
> > 0x1d4>,
> > + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
> > 0x1d4>,
> > + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT
> > 0xc1>;
> > + };
> > +
> > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
> > 0x196>,
> > + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
> > 0x1d6>,
> > + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
> > 0x1d6>,
> > + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
> > 0x1d6>,
> > + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
> > 0x1d6>,
> > + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
> > 0x1d6>,
> > + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT
> > 0xc1>;
> > + };
> > +
> > + pinctrl_usdhc3: usdhc3grp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
> > 0x190>,
> > + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
> > 0x1d0>,
> > + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
> > 0x190>;
> > + };
> > +
> > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
> > 0x194>,
> > + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
> > 0x1d4>,
> > + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
> > 0x194>;
> > + };
> > +
> > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
> > 0x196>,
> > + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
> > 0x1d6>,
> > + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
> > 0x196>;
> > + };
> > +
> > + pinctrl_wdog: wdoggrp {
> > + fsl,pins =
> > + <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B
> > 0xc6>;
> > + };
> > +};
> > --
> > 2.35.1
> >