If a 'set_bclk_ratio' call is attempted on a DAI not implementing the
method, make it an -ENOSUPP error instead of -EINVAL. Assume the DAI can
still be okay with the ratio, just does not care to register a handler.
No current in-tree users of snd_soc_dai_set_bclk_ratio seem to inspect
the return value, but -ENOSUPP disables an error print from within the
common soc_dai_ret return filter. With the new behavior a machine
driver can do a blanket 'set_bclk_ratio' on all DAIs on a bus, some of
which may care about the ratio, some of which may not.
Signed-off-by: Martin Povišer <[email protected]>
---
sound/soc/soc-dai.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c
index d530e8c2b77b..49752af0e205 100644
--- a/sound/soc/soc-dai.c
+++ b/sound/soc/soc-dai.c
@@ -124,7 +124,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
*/
int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
{
- int ret = -EINVAL;
+ int ret = -ENOTSUPP;
if (dai->driver->ops &&
dai->driver->ops->set_bclk_ratio)
--
2.33.0