This patch includes the following updates for Yosemite V2
BMC.
1) Updated GPIO configuration for power control.
2) Added IPMB-13 channel for Debug Card communication.
3) Removed EEPROM driver IPMB-12 channel and keeping it as
"status ok".
Signed-off-by: Karthikeyan Pasupathi <[email protected]>
---
.../dts/aspeed-bmc-facebook-yosemitev2.dts | 49 +++++++++++++++++--
1 file changed, 44 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..4d2ff7eb6740 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -119,6 +119,40 @@
&pinctrl_adc15_default>;
};
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "POWER_BUTTON","POWER_OUT1","","POWER_OUT2","","POWER_OUT3","","POWER_OUT4",
+ /*E0-E7*/ "DEBUG_UART_SEL0","DEBUG_UART_SEL1","DEBUG_UART_SEL2","DEBUG_UART_RX_SEL_N","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2","LED_POST_CODE_3","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "SLOT1_POWER_OK","SLOT2_POWER_OK","SLOT3_POWER_OK","SLOT4_POWER_OK","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","I2C_SLOT1","I2C_SLOT2","I2C_SLOT3","I2C_SLOT4","","",
+ /*O0-O7*/ "","","","SELECTOR_BUTTON","SLOT1_POWER","SLOT2_POWER","SLOT3_POWER","SLOT4_POWER",
+ /*P0-P7*/ "","","","","LED_POST_CODE_4","LED_POST_CODE_5","LED_POST_CODE_6","LED_POST_CODE_7",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","GPIO_DBG_CARD_PRSNT","","","","",
+ /*S0-S7*/ "RESET_OUT1","RESET_OUT2","RESET_OUT3","RESET_OUT4","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "POST_COMPLETE","POST_COMPLETE2","POST_COMPLETE3","POST_COMPLETE4","","","","",
+ /*AA0-AA7*/ "","","","","HAND_SW1","HAND_SW2","HAND_SW3","HAND_SW4",
+ /*AB0-AB7*/ "RESET_BUTTON","","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
&i2c1 {
//Host1 IPMB bus
status = "okay";
@@ -207,11 +241,16 @@
&i2c12 {
status = "okay";
- //MEZZ_FRU
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- pagesize = <32>;
+};
+
+&i2c13 {
+ status = "okay";
+ // Debug Card
+ multi-master;
+ ipmb13@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
};
};
--
2.17.1
On Mon, 22 Aug 2022 at 07:02, Karthikeyan Pasupathi
<[email protected]> wrote:
>
> This patch includes the following updates for Yosemite V2
> BMC.
>
> 1) Updated GPIO configuration for power control.
Please take a look the openbmc naming conventions for the GPIOs. If
you are not going to follow them, please explain why in your commit
message.
> 2) Added IPMB-13 channel for Debug Card communication.
> 3) Removed EEPROM driver IPMB-12 channel and keeping it as
> "status ok".
If you find yourself writing a commit log that contains 1), 2), 3)
then there's a fair chance you could have sent three separate patches.
Consider this for next time.
>
> Signed-off-by: Karthikeyan Pasupathi <[email protected]>
> ---
> .../dts/aspeed-bmc-facebook-yosemitev2.dts | 49 +++++++++++++++++--
> 1 file changed, 44 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> index 8864e9c312a8..4d2ff7eb6740 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> @@ -119,6 +119,40 @@
> &pinctrl_adc15_default>;
> };
>
> +&gpio {
> + status = "okay";
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "POWER_BUTTON","POWER_OUT1","","POWER_OUT2","","POWER_OUT3","","POWER_OUT4",
> + /*E0-E7*/ "DEBUG_UART_SEL0","DEBUG_UART_SEL1","DEBUG_UART_SEL2","DEBUG_UART_RX_SEL_N","","","","",
> + /*F0-F7*/ "","","","","","","","",
> + /*G0-G7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2","LED_POST_CODE_3","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "SLOT1_POWER_OK","SLOT2_POWER_OK","SLOT3_POWER_OK","SLOT4_POWER_OK","","","","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","I2C_SLOT1","I2C_SLOT2","I2C_SLOT3","I2C_SLOT4","","",
> + /*O0-O7*/ "","","","SELECTOR_BUTTON","SLOT1_POWER","SLOT2_POWER","SLOT3_POWER","SLOT4_POWER",
> + /*P0-P7*/ "","","","","LED_POST_CODE_4","LED_POST_CODE_5","LED_POST_CODE_6","LED_POST_CODE_7",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","GPIO_DBG_CARD_PRSNT","","","","",
> + /*S0-S7*/ "RESET_OUT1","RESET_OUT2","RESET_OUT3","RESET_OUT4","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "POST_COMPLETE","POST_COMPLETE2","POST_COMPLETE3","POST_COMPLETE4","","","","",
> + /*AA0-AA7*/ "","","","","HAND_SW1","HAND_SW2","HAND_SW3","HAND_SW4",
> + /*AB0-AB7*/ "RESET_BUTTON","","","","","","","",
> + /*AC0-AC7*/ "","","","","","","","";
> +};
> +
> &i2c1 {
> //Host1 IPMB bus
> status = "okay";
> @@ -207,11 +241,16 @@
>
> &i2c12 {
> status = "okay";
> - //MEZZ_FRU
> - eeprom@51 {
> - compatible = "atmel,24c64";
> - reg = <0x51>;
> - pagesize = <32>;
> +};
> +
> +&i2c13 {
> + status = "okay";
> + // Debug Card
> + multi-master;
> + ipmb13@10 {
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> };
> };
>
> --
> 2.17.1
>