convert the amlogic,meson-name.txt to amlogic,meson-nand.yaml
Signed-off-by: Liang Yang <[email protected]>
---
.../bindings/mtd/amlogic,meson-nand.txt | 55 ------------
.../bindings/mtd/amlogic,meson-nand.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5d5cdfef417f..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
- - "amlogic,meson-gxl-nfc"
- - "amlogic,meson-axg-nfc"
-
-- reg : Offset and length of the register set
-
-- reg-names : "nfc" is the register set for NFC controller and "emmc"
- is the register set for MCI controller.
-
-- clocks :
- A list of phandle + clock-specifier pairs for the clocks listed
- in clock-names.
-
-- clock-names: Should contain the following:
- "core" - NFC module gate clock
- "device" - parent clock for internal NFC
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
- nand-controller@7800 {
- compatible = "amlogic,meson-axg-nfc";
- reg = <0x0 0x7800 0x0 0x100>,
- <0x0 0x7000 0x0 0x800>;
- reg-names = "nfc", "emmc";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "device";
-
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins>;
-
- nand@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- nand-on-flash-bbt;
- };
- };
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..42634e9c0d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+ - $ref: "nand-controller.yaml"
+
+maintainers:
+ - [email protected]
+
+properties:
+ compatible:
+ enum:
+ - "amlogic,meson-gxl-nfc"
+ - "amlogic,meson-axg-nfc"
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: device
+
+patternProperties:
+ "^nand@[0-7]$":
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1
+
+ nand-ecc-mode:
+ const: hw
+
+ nand-ecc-step-size:
+ const: 1024
+
+ nand-ecc-strength:
+ enum: [8, 16, 24, 30, 40, 50, 60]
+ description: |
+ The ECC configurations that can be supported are as follows.
+ meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+ meson-axg-nfc 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-clkc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ nand-controller@ffe07800 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+ reg-names = "nfc", "emmc";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "device";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ };
+ };
+
+...
--
2.34.1
+CC [[email protected]]
Please Add this ML to CC if you resend, it's the last patch of the serie that haven't got a proper review.
On 22/08/2022 11:18, Liang Yang wrote:
> convert the amlogic,meson-name.txt to amlogic,meson-nand.yaml
>
> Signed-off-by: Liang Yang <[email protected]>
> ---
> .../bindings/mtd/amlogic,meson-nand.txt | 55 ------------
> .../bindings/mtd/amlogic,meson-nand.yaml | 88 +++++++++++++++++++
> 2 files changed, 88 insertions(+), 55 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> deleted file mode 100644
> index 5d5cdfef417f..000000000000
> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
> -
> -This file documents the properties in addition to those available in
> -the MTD NAND bindings.
> -
> -Required properties:
> -- compatible : contains one of:
> - - "amlogic,meson-gxl-nfc"
> - - "amlogic,meson-axg-nfc"
> -
> -- reg : Offset and length of the register set
> -
> -- reg-names : "nfc" is the register set for NFC controller and "emmc"
> - is the register set for MCI controller.
> -
> -- clocks :
> - A list of phandle + clock-specifier pairs for the clocks listed
> - in clock-names.
> -
> -- clock-names: Should contain the following:
> - "core" - NFC module gate clock
> - "device" - parent clock for internal NFC
> -
> -Optional children nodes:
> -Children nodes represent the available nand chips.
> -
> -Other properties:
> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
> -
> -Example demonstrate on AXG SoC:
> -
> - nand-controller@7800 {
> - compatible = "amlogic,meson-axg-nfc";
> - reg = <0x0 0x7800 0x0 0x100>,
> - <0x0 0x7000 0x0 0x800>;
> - reg-names = "nfc", "emmc";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> -
> - clocks = <&clkc CLKID_SD_EMMC_C>,
> - <&clkc CLKID_FCLK_DIV2>;
> - clock-names = "core", "device";
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&nand_pins>;
> -
> - nand@0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - nand-on-flash-bbt;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> new file mode 100644
> index 000000000000..42634e9c0d3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
> +
> +allOf:
> + - $ref: "nand-controller.yaml"
> +
> +maintainers:
> + - [email protected]
> +
> +properties:
> + compatible:
> + enum:
> + - "amlogic,meson-gxl-nfc"
> + - "amlogic,meson-axg-nfc"
> +
> + reg:
> + maxItems: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 2
> +
> + clock-names:
> + items:
> + - const: core
> + - const: device
> +
> +patternProperties:
> + "^nand@[0-7]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
> +
> + nand-ecc-mode:
> + const: hw
> +
> + nand-ecc-step-size:
> + const: 1024
> +
> + nand-ecc-strength:
> + enum: [8, 16, 24, 30, 40, 50, 60]
> + description: |
> + The ECC configurations that can be supported are as follows.
> + meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
> + meson-axg-nfc 8
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/axg-clkc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + nand-controller@ffe07800 {
> + compatible = "amlogic,meson-axg-nfc";
> + reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
> + reg-names = "nfc", "emmc";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_FCLK_DIV2>;
> + clock-names = "core", "device";
> +
> + pinctrl-0 = <&nand_pins>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + nand@0 {
> + reg = <0>;
> + };
> + };
> +
> +...
Thanks,
Neil
Hi Neil,
Thanks for your remind.
I will add the ML in next resend version quickly.
On 2022/9/5 15:22, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
>
> +CC [[email protected]]
>
> Please Add this ML to CC if you resend, it's the last patch of the serie
> that haven't got a proper review.
>
> On 22/08/2022 11:18, Liang Yang wrote:
>> convert the amlogic,meson-name.txt to amlogic,meson-nand.yaml
>>
>> Signed-off-by: Liang Yang <[email protected]>
>> ---
>> .../bindings/mtd/amlogic,meson-nand.txt | 55 ------------
>> .../bindings/mtd/amlogic,meson-nand.yaml | 88 +++++++++++++++++++
>> 2 files changed, 88 insertions(+), 55 deletions(-)
>> delete mode 100644
>> Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> create mode 100644
>> Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> deleted file mode 100644
>> index 5d5cdfef417f..000000000000
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> +++ /dev/null
>> @@ -1,55 +0,0 @@
>> -Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> -
>> -This file documents the properties in addition to those available in
>> -the MTD NAND bindings.
>> -
>> -Required properties:
>> -- compatible : contains one of:
>> - - "amlogic,meson-gxl-nfc"
>> - - "amlogic,meson-axg-nfc"
>> -
>> -- reg : Offset and length of the register set
>> -
>> -- reg-names : "nfc" is the register set for NFC controller and "emmc"
>> - is the register set for MCI controller.
>> -
>> -- clocks :
>> - A list of phandle + clock-specifier pairs for the clocks listed
>> - in clock-names.
>> -
>> -- clock-names: Should contain the following:
>> - "core" - NFC module gate clock
>> - "device" - parent clock for internal NFC
>> -
>> -Optional children nodes:
>> -Children nodes represent the available nand chips.
>> -
>> -Other properties:
>> -see Documentation/devicetree/bindings/mtd/nand-controller.yaml for
>> generic bindings.
>> -
>> -Example demonstrate on AXG SoC:
>> -
>> - nand-controller@7800 {
>> - compatible = "amlogic,meson-axg-nfc";
>> - reg = <0x0 0x7800 0x0 0x100>,
>> - <0x0 0x7000 0x0 0x800>;
>> - reg-names = "nfc", "emmc";
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> - interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> -
>> - clocks = <&clkc CLKID_SD_EMMC_C>,
>> - <&clkc CLKID_FCLK_DIV2>;
>> - clock-names = "core", "device";
>> -
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&nand_pins>;
>> -
>> - nand@0 {
>> - reg = <0>;
>> - #address-cells = <1>;
>> - #size-cells = <1>;
>> -
>> - nand-on-flash-bbt;
>> - };
>> - };
>> diff --git
>> a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> new file mode 100644
>> index 000000000000..42634e9c0d3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -0,0 +1,88 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
>> +
>> +allOf:
>> + - $ref: "nand-controller.yaml"
>> +
>> +maintainers:
>> + - [email protected]
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - "amlogic,meson-gxl-nfc"
>> + - "amlogic,meson-axg-nfc"
>> +
>> + reg:
>> + maxItems: 2
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + minItems: 2
>> +
>> + clock-names:
>> + items:
>> + - const: core
>> + - const: device
>> +
>> +patternProperties:
>> + "^nand@[0-7]$":
>> + type: object
>> + properties:
>> + reg:
>> + minimum: 0
>> + maximum: 1
>> +
>> + nand-ecc-mode:
>> + const: hw
>> +
>> + nand-ecc-step-size:
>> + const: 1024
>> +
>> + nand-ecc-strength:
>> + enum: [8, 16, 24, 30, 40, 50, 60]
>> + description: |
>> + The ECC configurations that can be supported are as follows.
>> + meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
>> + meson-axg-nfc 8
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clocks
>> + - clock-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/axg-clkc.h>
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + nand-controller@ffe07800 {
>> + compatible = "amlogic,meson-axg-nfc";
>> + reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
>> + reg-names = "nfc", "emmc";
>> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_FCLK_DIV2>;
>> + clock-names = "core", "device";
>> +
>> + pinctrl-0 = <&nand_pins>;
>> + pinctrl-names = "default";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + nand@0 {
>> + reg = <0>;
>> + };
>> + };
>> +
>> +...
>
> Thanks,
> Neil
>
> .