As per RGMII specification v2.0, section 3.4.1, RGMII/RTBI has an
optional in-band status feature where the PHY's link status, speed and
duplex mode can be passed to the MAC.
Allow RGMII/RTBI to use in-band status.
Signed-off-by: Qingfang DENG <[email protected]>
---
v1 -> v2: rebased and targeted to net-next.
drivers/net/phy/phylink.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index d2455df1d8d2..e487bdea9b47 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -634,6 +634,11 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_QSGMII:
case PHY_INTERFACE_MODE_QUSGMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RTBI:
phylink_set(pl->supported, 10baseT_Half);
phylink_set(pl->supported, 10baseT_Full);
phylink_set(pl->supported, 100baseT_Half);
--
2.34.1
Hello:
This patch was applied to netdev/net-next.git (master)
by David S. Miller <[email protected]>:
On Wed, 24 Aug 2022 14:10:34 +0800 you wrote:
> As per RGMII specification v2.0, section 3.4.1, RGMII/RTBI has an
> optional in-band status feature where the PHY's link status, speed and
> duplex mode can be passed to the MAC.
> Allow RGMII/RTBI to use in-band status.
>
> Signed-off-by: Qingfang DENG <[email protected]>
>
> [...]
Here is the summary with links:
- [v2,net-next] net: phylink: allow RGMII/RTBI in-band status
https://git.kernel.org/netdev/net-next/c/d73ffc08824d
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html