This series adds bindings and a driver for the RGB LED controller found
in some Allwinner SoCs, starting with A100. The hardware in the R329 and
D1 SoCs appears to be identical.
Patch 3 is included because the LED controller binding requires the DMA
properties. That patch was sent previously[1], but never got merged.
Patches 5-6 depend on the D1 devicetree series[2], but the rest of this
series can be merged without them.
This driver was tested on the D1 Nezha board.
[1]: https://lore.kernel.org/linux-arm-kernel/[email protected]/
[2]: https://lore.kernel.org/linux-riscv/[email protected]/
Changes in v5:
- A100 contains the original implementation, so use that as the base
compatible string, and rename the binding to match
- Add "unevaluatedProperties: false" to the child multi-led binding
- Rename the driver R329 -> A100, since that is the actual original
implementation
Changes in v4:
- Use "default" instead of "maxItems" for timing properties
- Depend on LEDS_CLASS_MULTICOLOR
Changes in v3:
- Removed quotes from enumeration values
- Added vendor prefix to timing/format properties
- Renamed "format" property to "pixel-format" for clarity
- Dropped "vled-supply" as it is unrelated to the controller hardware
- Added vendor prefix to timing/format properties
- Renamed "format" property to "pixel-format" for clarity
- Dropped "vled-supply" as it is unrelated to the controller hardware
- Changed "writesl" to "iowrite32_rep" so the driver builds on hppa
Changes in v2:
- Fixed typo leading to duplicate t1h-ns property
- Removed "items" layer in definition of dmas/dma-names
- Replaced uint32 type reference with maxItems in timing properties
- Renamed from sunxi-ledc to sun50i-r329-ledc
- Added missing "static" to functions/globals as reported by 0day bot
Samuel Holland (5):
dt-bindings: leds: Add Allwinner A100 LED controller
leds: sun50i-a100: New driver for the A100 LED controller
arm64: dts: allwinner: a100: Add LED controller node
riscv: dts: allwinner: d1: Add LED controller node
riscv: dts: allwinner: d1: Add RGB LEDs to boards
Yangtao Li (1):
arm64: dts: allwinner: a100: Add device node for DMA controller
.../leds/allwinner,sun50i-a100-ledc.yaml | 139 +++++
.../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 26 +
.../allwinner/sun20i-d1-lichee-rv-dock.dts | 12 +
.../boot/dts/allwinner/sun20i-d1-nezha.dts | 13 +
arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 21 +
drivers/leds/Kconfig | 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-sun50i-a100.c | 554 ++++++++++++++++++
8 files changed, 775 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
create mode 100644 drivers/leds/leds-sun50i-a100.c
--
2.35.1
Allwinner D1 contains an LED controller. Add its devicetree node, as
well as the pinmux used by the reference board design.
Signed-off-by: Samuel Holland <[email protected]>
---
Changes in v5:
- New patch for v5
arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 21 ++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
index 9a9b3e0fe79d..53b0cb64906f 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -115,6 +115,12 @@ lcd_rgb666_pins: lcd-rgb666-pins {
function = "lcd0";
};
+ /omit-if-no-ref/
+ ledc_pc0_pin: ledc-pc0-pin {
+ pins = "PC0";
+ function = "ledc";
+ };
+
/omit-if-no-ref/
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
@@ -178,6 +184,21 @@ ccu: clock-controller@2001000 {
#reset-cells = <1>;
};
+ ledc: led-controller@2008000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_LEDC>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
lradc: keys@2009800 {
compatible = "allwinner,sun20i-d1-lradc",
"allwinner,sun50i-r329-lradc";
--
2.35.1
Allwinner A100 contains an LED controller. Add it to the devicetree.
Signed-off-by: Samuel Holland <[email protected]>
---
Changes in v5:
- New patch for v5
arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 5453a3bb7d81..d5d13ea46c15 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -265,6 +265,20 @@ i2c3: i2c@5002c00 {
#size-cells = <0>;
};
+ ledc: led-controller@5018000 {
+ compatible = "allwinner,sun50i-a100-ledc";
+ reg = <0x5018000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_LEDC>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ths: thermal-sensor@5070400 {
compatible = "allwinner,sun50i-a100-ths";
reg = <0x05070400 0x100>;
--
2.35.1
The Allwinner A100, R329, and D1 SoCs contain an LED controller designed
to drive a series of RGB LED pixels. It supports PIO and DMA transfers,
and has configurable timing and pixel format. All three implementations
appear to be identical, so use the oldest as the fallback compatible.
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
---
Changes in v5:
- A100 contains the original implementation, so use that as the base
compatible string, and rename the binding to match
- Add "unevaluatedProperties: false" to the child multi-led binding
Changes in v4:
- Use "default" instead of "maxItems" for timing properties
Changes in v3:
- Removed quotes from enumeration values
- Added vendor prefix to timing/format properties
- Renamed "format" property to "pixel-format" for clarity
- Dropped "vled-supply" as it is unrelated to the controller hardware
Changes in v2:
- Fixed typo leading to duplicate t1h-ns property
- Removed "items" layer in definition of dmas/dma-names
- Replaced uint32 type reference with maxItems in timing properties
.../leds/allwinner,sun50i-a100-ledc.yaml | 139 ++++++++++++++++++
1 file changed, 139 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
new file mode 100644
index 000000000000..fc8ecf6f91e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller Bindings
+
+maintainers:
+ - Samuel Holland <[email protected]>
+
+description:
+ The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+ interface to drive up to 1024 RGB LEDs.
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun50i-a100-ledc
+ - items:
+ - enum:
+ - allwinner,sun20i-d1-ledc
+ - allwinner,sun50i-r329-ledc
+ - const: allwinner,sun50i-a100-ledc
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus clock
+ - description: Module clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+ description: TX DMA channel
+
+ dma-names:
+ const: tx
+
+ allwinner,pixel-format:
+ description: Pixel format (subpixel transmission order), default is "grb"
+ enum:
+ - bgr
+ - brg
+ - gbr
+ - grb
+ - rbg
+ - rgb
+
+ allwinner,t0h-ns:
+ default: 336
+ description: Length of high pulse when transmitting a "0" bit
+
+ allwinner,t0l-ns:
+ default: 840
+ description: Length of low pulse when transmitting a "0" bit
+
+ allwinner,t1h-ns:
+ default: 882
+ description: Length of high pulse when transmitting a "1" bit
+
+ allwinner,t1l-ns:
+ default: 294
+ description: Length of low pulse when transmitting a "1" bit
+
+ allwinner,treset-ns:
+ default: 300000
+ description: Minimum delay between transmission frames
+
+patternProperties:
+ "^multi-led@[0-9a-f]+$":
+ type: object
+ $ref: leds-class-multicolor.yaml#
+ unevaluatedProperties: false
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1023
+ description: Index of the LED in the series (must be contiguous)
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ ledc: led-controller@2008000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu 12>, <&ccu 34>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 12>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
+
+...
--
2.35.1