Use the FIELD_{GET,PREP}() helpers, instead of defining custom macros
implementing the same operations.
Signed-off-by: Amelie Delaunay <[email protected]>
---
drivers/dma/stm32-dma.c | 60 +++++++++++++++++------------------------
1 file changed, 25 insertions(+), 35 deletions(-)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 5d67e168aaee..6aa281561f38 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -9,6 +9,7 @@
* Pierre-Yves Mordret <[email protected]>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
@@ -54,20 +55,13 @@
/* DMA Stream x Configuration Register */
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
-#define STM32_DMA_SCR_REQ(n) ((n & 0x7) << 25)
+#define STM32_DMA_SCR_REQ_MASK GENMASK(27, 25)
#define STM32_DMA_SCR_MBURST_MASK GENMASK(24, 23)
-#define STM32_DMA_SCR_MBURST(n) ((n & 0x3) << 23)
#define STM32_DMA_SCR_PBURST_MASK GENMASK(22, 21)
-#define STM32_DMA_SCR_PBURST(n) ((n & 0x3) << 21)
#define STM32_DMA_SCR_PL_MASK GENMASK(17, 16)
-#define STM32_DMA_SCR_PL(n) ((n & 0x3) << 16)
#define STM32_DMA_SCR_MSIZE_MASK GENMASK(14, 13)
-#define STM32_DMA_SCR_MSIZE(n) ((n & 0x3) << 13)
#define STM32_DMA_SCR_PSIZE_MASK GENMASK(12, 11)
-#define STM32_DMA_SCR_PSIZE(n) ((n & 0x3) << 11)
-#define STM32_DMA_SCR_PSIZE_GET(n) ((n & STM32_DMA_SCR_PSIZE_MASK) >> 11)
#define STM32_DMA_SCR_DIR_MASK GENMASK(7, 6)
-#define STM32_DMA_SCR_DIR(n) ((n & 0x3) << 6)
#define STM32_DMA_SCR_TRBUFF BIT(20) /* Bufferable transfer for USART/UART */
#define STM32_DMA_SCR_CT BIT(19) /* Target in double buffer */
#define STM32_DMA_SCR_DBM BIT(18) /* Double Buffer Mode */
@@ -104,7 +98,6 @@
/* DMA stream x FIFO control register */
#define STM32_DMA_SFCR(x) (0x0024 + 0x18 * (x))
#define STM32_DMA_SFCR_FTH_MASK GENMASK(1, 0)
-#define STM32_DMA_SFCR_FTH(n) (n & STM32_DMA_SFCR_FTH_MASK)
#define STM32_DMA_SFCR_FEIE BIT(7) /* FIFO error interrupt enable */
#define STM32_DMA_SFCR_DMDIS BIT(2) /* Direct mode disable */
#define STM32_DMA_SFCR_MASK (STM32_DMA_SFCR_FEIE \
@@ -145,11 +138,8 @@
/* DMA Features */
#define STM32_DMA_THRESHOLD_FTR_MASK GENMASK(1, 0)
-#define STM32_DMA_THRESHOLD_FTR_GET(n) ((n) & STM32_DMA_THRESHOLD_FTR_MASK)
#define STM32_DMA_DIRECT_MODE_MASK BIT(2)
-#define STM32_DMA_DIRECT_MODE_GET(n) (((n) & STM32_DMA_DIRECT_MODE_MASK) >> 2)
#define STM32_DMA_ALT_ACK_MODE_MASK BIT(4)
-#define STM32_DMA_ALT_ACK_MODE_GET(n) (((n) & STM32_DMA_ALT_ACK_MODE_MASK) >> 4)
enum stm32_dma_width {
STM32_DMA_BYTE,
@@ -856,7 +846,8 @@ static int stm32_dma_resume(struct dma_chan *c)
sg_req = &chan->desc->sg_req[chan->next_sg - 1];
ndtr = sg_req->chan_reg.dma_sndtr;
- offset = (ndtr - chan_reg.dma_sndtr) << STM32_DMA_SCR_PSIZE_GET(chan_reg.dma_scr);
+ offset = (ndtr - chan_reg.dma_sndtr);
+ offset <<= FIELD_GET(STM32_DMA_SCR_PSIZE_MASK, chan_reg.dma_scr);
spar = sg_req->chan_reg.dma_spar;
sm0ar = sg_req->chan_reg.dma_sm0ar;
sm1ar = sg_req->chan_reg.dma_sm1ar;
@@ -968,16 +959,16 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
if (src_burst_size < 0)
return src_burst_size;
- dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_DEV) |
- STM32_DMA_SCR_PSIZE(dst_bus_width) |
- STM32_DMA_SCR_MSIZE(src_bus_width) |
- STM32_DMA_SCR_PBURST(dst_burst_size) |
- STM32_DMA_SCR_MBURST(src_burst_size);
+ dma_scr = FIELD_PREP(STM32_DMA_SCR_DIR_MASK, STM32_DMA_MEM_TO_DEV) |
+ FIELD_PREP(STM32_DMA_SCR_PSIZE_MASK, dst_bus_width) |
+ FIELD_PREP(STM32_DMA_SCR_MSIZE_MASK, src_bus_width) |
+ FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dst_burst_size) |
+ FIELD_PREP(STM32_DMA_SCR_MBURST_MASK, src_burst_size);
/* Set FIFO threshold */
chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK;
if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE)
- chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth);
+ chan->chan_reg.dma_sfcr |= FIELD_PREP(STM32_DMA_SFCR_FTH_MASK, fifoth);
/* Set peripheral address */
chan->chan_reg.dma_spar = chan->dma_sconfig.dst_addr;
@@ -1025,16 +1016,16 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
if (dst_burst_size < 0)
return dst_burst_size;
- dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_DEV_TO_MEM) |
- STM32_DMA_SCR_PSIZE(src_bus_width) |
- STM32_DMA_SCR_MSIZE(dst_bus_width) |
- STM32_DMA_SCR_PBURST(src_burst_size) |
- STM32_DMA_SCR_MBURST(dst_burst_size);
+ dma_scr = FIELD_PREP(STM32_DMA_SCR_DIR_MASK, STM32_DMA_DEV_TO_MEM) |
+ FIELD_PREP(STM32_DMA_SCR_PSIZE_MASK, src_bus_width) |
+ FIELD_PREP(STM32_DMA_SCR_MSIZE_MASK, dst_bus_width) |
+ FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, src_burst_size) |
+ FIELD_PREP(STM32_DMA_SCR_MBURST_MASK, dst_burst_size);
/* Set FIFO threshold */
chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK;
if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE)
- chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth);
+ chan->chan_reg.dma_sfcr |= FIELD_PREP(STM32_DMA_SFCR_FTH_MASK, fifoth);
/* Set peripheral address */
chan->chan_reg.dma_spar = chan->dma_sconfig.src_addr;
@@ -1242,16 +1233,15 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy(
stm32_dma_clear_reg(&desc->sg_req[i].chan_reg);
desc->sg_req[i].chan_reg.dma_scr =
- STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_MEM) |
- STM32_DMA_SCR_PBURST(dma_burst) |
- STM32_DMA_SCR_MBURST(dma_burst) |
+ FIELD_PREP(STM32_DMA_SCR_DIR_MASK, STM32_DMA_MEM_TO_MEM) |
+ FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) |
+ FIELD_PREP(STM32_DMA_SCR_MBURST_MASK, dma_burst) |
STM32_DMA_SCR_MINC |
STM32_DMA_SCR_PINC |
STM32_DMA_SCR_TCIE |
STM32_DMA_SCR_TEIE;
desc->sg_req[i].chan_reg.dma_sfcr |= STM32_DMA_SFCR_MASK;
- desc->sg_req[i].chan_reg.dma_sfcr |=
- STM32_DMA_SFCR_FTH(threshold);
+ desc->sg_req[i].chan_reg.dma_sfcr |= FIELD_PREP(STM32_DMA_SFCR_FTH_MASK, threshold);
desc->sg_req[i].chan_reg.dma_spar = src + offset;
desc->sg_req[i].chan_reg.dma_sm0ar = dest + offset;
desc->sg_req[i].chan_reg.dma_sndtr = xfer_count;
@@ -1270,7 +1260,7 @@ static u32 stm32_dma_get_remaining_bytes(struct stm32_dma_chan *chan)
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
- width = STM32_DMA_SCR_PSIZE_GET(dma_scr);
+ width = FIELD_GET(STM32_DMA_SCR_PSIZE_MASK, dma_scr);
ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id));
return ndtr << width;
@@ -1476,15 +1466,15 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
stm32_dma_clear_reg(&chan->chan_reg);
chan->chan_reg.dma_scr = cfg->stream_config & STM32_DMA_SCR_CFG_MASK;
- chan->chan_reg.dma_scr |= STM32_DMA_SCR_REQ(cfg->request_line);
+ chan->chan_reg.dma_scr |= FIELD_PREP(STM32_DMA_SCR_REQ_MASK, cfg->request_line);
/* Enable Interrupts */
chan->chan_reg.dma_scr |= STM32_DMA_SCR_TEIE | STM32_DMA_SCR_TCIE;
- chan->threshold = STM32_DMA_THRESHOLD_FTR_GET(cfg->features);
- if (STM32_DMA_DIRECT_MODE_GET(cfg->features))
+ chan->threshold = FIELD_GET(STM32_DMA_THRESHOLD_FTR_MASK, cfg->features);
+ if (FIELD_GET(STM32_DMA_DIRECT_MODE_MASK, cfg->features))
chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE;
- if (STM32_DMA_ALT_ACK_MODE_GET(cfg->features))
+ if (FIELD_GET(STM32_DMA_ALT_ACK_MODE_MASK, cfg->features))
chan->chan_reg.dma_scr |= STM32_DMA_SCR_TRBUFF;
}
--
2.25.1