Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Signed-off-by: Eliav Farber <[email protected]>
---
V3 -> V2:
- Remove configuration of ip-polling register to a separate commit.
- Explain the fix.
drivers/hwmon/mr75203.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 901030125127..639f5a300170 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -68,8 +68,9 @@
/* VM Individual Macro Register */
#define VM_COM_REG_SIZE 0x200
-#define VM_SDIF_DONE(n) (VM_COM_REG_SIZE + 0x34 + 0x200 * (n))
-#define VM_SDIF_DATA(n) (VM_COM_REG_SIZE + 0x40 + 0x200 * (n))
+#define VM_SDIF_DONE(vm) (VM_COM_REG_SIZE + 0x34 + 0x200 * (vm))
+#define VM_SDIF_DATA(vm, ch) \
+ (VM_COM_REG_SIZE + 0x40 + 0x200 * (vm) + 0x4 * (ch))
/* SDA Slave Register */
#define IP_CTRL 0x00
@@ -115,6 +116,7 @@ struct pvt_device {
u32 t_num;
u32 p_num;
u32 v_num;
+ u32 c_num;
u32 ip_freq;
u8 *vm_idx;
};
@@ -179,13 +181,14 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
struct pvt_device *pvt = dev_get_drvdata(dev);
struct regmap *v_map = pvt->v_map;
u32 n, stat;
- u8 vm_idx;
+ u8 vm_idx, ch_idx;
int ret;
- if (channel >= pvt->v_num)
+ if (channel >= pvt->v_num * pvt->c_num)
return -EINVAL;
- vm_idx = pvt->vm_idx[channel];
+ vm_idx = pvt->vm_idx[channel / pvt->c_num];
+ ch_idx = channel % pvt->c_num;
switch (attr) {
case hwmon_in_input:
@@ -196,7 +199,7 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
if (ret)
return ret;
- ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx), &n);
+ ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx, ch_idx), &n);
if(ret < 0)
return ret;
@@ -500,7 +503,7 @@ static int pvt_reset_control_deassert(struct device *dev, struct pvt_device *pvt
static int mr75203_probe(struct platform_device *pdev)
{
const struct hwmon_channel_info **pvt_info;
- u32 ts_num, vm_num, pd_num, val, index, i;
+ u32 ts_num, vm_num, pd_num, ch_num, val, index, i;
struct device *dev = &pdev->dev;
u32 *temp_config, *in_config;
struct device *hwmon_dev;
@@ -544,9 +547,11 @@ static int mr75203_probe(struct platform_device *pdev)
ts_num = (val & TS_NUM_MSK) >> TS_NUM_SFT;
pd_num = (val & PD_NUM_MSK) >> PD_NUM_SFT;
vm_num = (val & VM_NUM_MSK) >> VM_NUM_SFT;
+ ch_num = (val & CH_NUM_MSK) >> CH_NUM_SFT;
pvt->t_num = ts_num;
pvt->p_num = pd_num;
pvt->v_num = vm_num;
+ pvt->c_num = ch_num;
val = 0;
if (ts_num)
val++;
@@ -583,6 +588,8 @@ static int mr75203_probe(struct platform_device *pdev)
}
if (vm_num) {
+ u32 total_ch = ch_num * vm_num;
+
ret = pvt_get_regmap(pdev, "vm", pvt);
if (ret)
return ret;
@@ -611,13 +618,13 @@ static int mr75203_probe(struct platform_device *pdev)
pvt->v_num = i;
}
- in_config = devm_kcalloc(dev, vm_num + 1,
+ in_config = devm_kcalloc(dev, total_ch + 1,
sizeof(*in_config), GFP_KERNEL);
if (!in_config)
return -ENOMEM;
- memset32(in_config, HWMON_I_INPUT, vm_num);
- in_config[vm_num] = 0;
+ memset32(in_config, HWMON_I_INPUT, total_ch);
+ in_config[total_ch] = 0;
pvt_in.config = in_config;
pvt_info[index++] = &pvt_in;
--
2.37.1
On Tue, Aug 30, 2022 at 07:21:59PM +0000, Eliav Farber wrote:
> Fix voltage allocation and reading to support all channels in all VMs.
> Prior to this change allocation and reading were done only for the first
> channel in each VM.
> This change counts the total number of channels for allocation, and takes
> into account the channel offset when reading the sample data register.
...
> struct pvt_device *pvt = dev_get_drvdata(dev);
> struct regmap *v_map = pvt->v_map;
> u32 n, stat;
> - u8 vm_idx;
> + u8 vm_idx, ch_idx;
Can you keep it sorted by line length?
> int ret;
...
> const struct hwmon_channel_info **pvt_info;
> - u32 ts_num, vm_num, pd_num, val, index, i;
> + u32 ts_num, vm_num, pd_num, ch_num, val, index, i;
Ditto.
--
With Best Regards,
Andy Shevchenko
On 8/31/2022 12:46 PM, Andy Shevchenko wrote:
> On Tue, Aug 30, 2022 at 07:21:59PM +0000, Eliav Farber wrote:
>> Fix voltage allocation and reading to support all channels in all VMs.
>> Prior to this change allocation and reading were done only for the first
>> channel in each VM.
>> This change counts the total number of channels for allocation, and
>> takes
>> into account the channel offset when reading the sample data register.
>
> ...
>
>> struct pvt_device *pvt = dev_get_drvdata(dev);
>> struct regmap *v_map = pvt->v_map;
>> u32 n, stat;
>> - u8 vm_idx;
>> + u8 vm_idx, ch_idx;
>
> Can you keep it sorted by line length?
Fixed.
>> int ret;
>
> ...
>
>> const struct hwmon_channel_info **pvt_info;
>> - u32 ts_num, vm_num, pd_num, val, index, i;
>> + u32 ts_num, vm_num, pd_num, ch_num, val, index, i;
>
> Ditto.
Fixed.
--
Thanks, Eliav