From: David Collins <[email protected]>
Add support for SPMI PMIC GPIO subtypes GPIO_LV_VIN2 and
GPIO_MV_VIN3.
GPIO_LV_VIN2 GPIOs support two input reference voltages: VIN0 and
VIN1. These are typically connected to 1.8 V and 1.2 V supplies
respectively.
GPIO_MV_VIN3 GPIOs support three input reference voltages: VIN0,
VIN1, and VIN2. These are typically connected to Vph, 1.8 V, and
1.2 V supplies respectively.
Signed-off-by: David Collins <[email protected]>
Signed-off-by: Anjelique Melendez <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index ccaf40a9c0e6..cf6b6047de8d 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/gpio/driver.h>
@@ -36,6 +37,8 @@
#define PMIC_GPIO_SUBTYPE_GPIOC_8CH 0xd
#define PMIC_GPIO_SUBTYPE_GPIO_LV 0x10
#define PMIC_GPIO_SUBTYPE_GPIO_MV 0x11
+#define PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2 0x12
+#define PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3 0x13
#define PMIC_MPP_REG_RT_STS 0x10
#define PMIC_MPP_REG_RT_STS_VAL_MASK 0x1
@@ -823,6 +826,16 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
pad->have_buffer = true;
pad->lv_mv_type = true;
break;
+ case PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2:
+ pad->num_sources = 2;
+ pad->have_buffer = true;
+ pad->lv_mv_type = true;
+ break;
+ case PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3:
+ pad->num_sources = 3;
+ pad->have_buffer = true;
+ pad->lv_mv_type = true;
+ break;
default:
dev_err(state->dev, "unknown GPIO type 0x%x\n", subtype);
return -ENODEV;
--
2.35.1