Add support for overriding electrical signal tuning parameters for
SNPS HS Phy.
Signed-off-by: Krishna Kurapati <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 255 +++++++++++++++++++++++++-
1 file changed, 253 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 5d20378..2502294 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -52,6 +52,12 @@
#define USB2_SUSPEND_N BIT(2)
#define USB2_SUSPEND_N_SEL BIT(3)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0 (0x6c)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1 (0x70)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2 (0x74)
+#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3 (0x78)
+#define PARAM_OVRD_MASK 0xFF
+
#define USB2_PHY_USB_PHY_CFG0 (0x94)
#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
@@ -60,12 +66,47 @@
#define REFCLK_SEL_MASK GENMASK(1, 0)
#define REFCLK_SEL_DEFAULT (0x2 << 0)
+#define HS_DISCONNECT_MASK GENMASK(2, 0)
+#define SQUELCH_DETECTOR_MASK GENMASK(7, 5)
+
+#define HS_AMPLITUDE_MASK GENMASK(3, 0)
+#define PREEMPHASIS_DURATION_MASK BIT(5)
+#define PREEMPHASIS_AMPLITUDE_MASK GENMASK(7, 6)
+
+#define HS_RISE_FALL_MASK GENMASK(1, 0)
+#define HS_CROSSOVER_VOLTAGE_MASK GENMASK(3, 2)
+#define HS_OUTPUT_IMPEDANCE_MASK GENMASK(5, 4)
+
+#define LS_FS_OUTPUT_IMPEDANCE_MASK GENMASK(3, 0)
+
static const char * const qcom_snps_hsphy_vreg_names[] = {
"vdda-pll", "vdda33", "vdda18",
};
#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
+struct override_param {
+ s32 value;
+ u8 reg_val;
+};
+
+struct override_param_map {
+ const char *prop_name;
+ const struct override_param *param_table;
+ u8 table_size;
+ u8 reg_offset;
+ u8 param_mask;
+};
+
+struct phy_override_seq {
+ bool need_update;
+ u8 offset;
+ u8 value;
+ u8 mask;
+};
+
+#define NUM_HSPHY_TUNING_PARAMS (9)
+
/**
* struct qcom_snps_hsphy - snps hs phy attributes
*
@@ -91,6 +132,7 @@ struct qcom_snps_hsphy {
bool phy_initialized;
enum phy_mode mode;
+ struct phy_override_seq update_seq_cfg[NUM_HSPHY_TUNING_PARAMS];
};
static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
@@ -173,10 +215,158 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
return 0;
}
+static const struct override_param hs_disconnect_sc7280[] = {
+ { -272, 0 },
+ { 0, 1 },
+ { 317, 2 },
+ { 630, 3 },
+ { 973, 4 },
+ { 1332, 5 },
+ { 1743, 6 },
+ { 2156, 7 },
+};
+
+static const struct override_param squelch_det_threshold_sc7280[] = {
+ { -2090, 7 },
+ { -1560, 6 },
+ { -1030, 5 },
+ { -530, 4 },
+ { 0, 3 },
+ { 530, 2 },
+ { 1060, 1 },
+ { 1590, 0 },
+};
+
+static const struct override_param hs_amplitude_sc7280[] = {
+ { -660, 0 },
+ { -440, 1 },
+ { -220, 2 },
+ { 0, 3 },
+ { 230, 4 },
+ { 440, 5 },
+ { 650, 6 },
+ { 890, 7 },
+ { 1110, 8 },
+ { 1330, 9 },
+ { 1560, 10 },
+ { 1780, 11 },
+ { 2000, 12 },
+ { 2220, 13 },
+ { 2430, 14 },
+ { 2670, 15 },
+};
+
+static const struct override_param preemphasis_duration_sc7280[] = {
+ { 10000, 1 },
+ { 20000, 0 },
+};
+
+static const struct override_param preemphasis_amplitude_sc7280[] = {
+ { 10000, 1 },
+ { 20000, 2 },
+ { 30000, 3 },
+ { 40000, 0 },
+};
+
+static const struct override_param hs_rise_fall_time_sc7280[] = {
+ { -4100, 3 },
+ { 0, 2 },
+ { 2810, 1 },
+ { 5430, 0 },
+};
+
+static const struct override_param hs_crossover_voltage_sc7280[] = {
+ { -31000, 1 },
+ { 0, 3 },
+ { 28000, 2 },
+};
+
+static const struct override_param hs_output_impedance_sc7280[] = {
+ { -2300000, 3 },
+ { 0, 2 },
+ { 2600000, 1 },
+ { 6100000, 0 },
+};
+
+static const struct override_param ls_fs_output_impedance_sc7280[] = {
+ { -1053, 15 },
+ { -557, 7 },
+ { 0, 3 },
+ { 612, 1 },
+ { 1310, 0 },
+};
+
+static const struct override_param_map sc7280_snps_7nm_phy[] = {
+ {
+ "qcom,hs-disconnect-bp",
+ hs_disconnect_sc7280,
+ ARRAY_SIZE(hs_disconnect_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
+ HS_DISCONNECT_MASK
+ },
+ {
+ "qcom,squelch-detector-bp",
+ squelch_det_threshold_sc7280,
+ ARRAY_SIZE(squelch_det_threshold_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
+ SQUELCH_DETECTOR_MASK
+ },
+ {
+ "qcom,hs-amplitude-bp",
+ hs_amplitude_sc7280,
+ ARRAY_SIZE(hs_amplitude_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+ HS_AMPLITUDE_MASK
+ },
+ {
+ "qcom,pre-emphasis-duration-bp",
+ preemphasis_duration_sc7280,
+ ARRAY_SIZE(preemphasis_duration_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+ PREEMPHASIS_DURATION_MASK,
+ },
+ {
+ "qcom,pre-emphasis-amplitude-bp",
+ preemphasis_amplitude_sc7280,
+ ARRAY_SIZE(preemphasis_amplitude_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+ PREEMPHASIS_AMPLITUDE_MASK,
+ },
+ {
+ "qcom,hs-rise-fall-time-bp",
+ hs_rise_fall_time_sc7280,
+ ARRAY_SIZE(hs_rise_fall_time_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+ HS_RISE_FALL_MASK
+ },
+ {
+ "qcom,hs-crossover-voltage-microvolt",
+ hs_crossover_voltage_sc7280,
+ ARRAY_SIZE(hs_crossover_voltage_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+ HS_CROSSOVER_VOLTAGE_MASK
+ },
+ {
+ "qcom,hs-output-impedance-micro-ohms",
+ hs_output_impedance_sc7280,
+ ARRAY_SIZE(hs_output_impedance_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
+ HS_OUTPUT_IMPEDANCE_MASK,
+ },
+ {
+ "qcom,ls-fs-output-impedance-bp",
+ ls_fs_output_impedance_sc7280,
+ ARRAY_SIZE(ls_fs_output_impedance_sc7280),
+ USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3,
+ LS_FS_OUTPUT_IMPEDANCE_MASK,
+ },
+ {},
+};
+
static int qcom_snps_hsphy_init(struct phy *phy)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
- int ret;
+ int ret, i;
dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
@@ -223,6 +413,14 @@ static int qcom_snps_hsphy_init(struct phy *phy)
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
VBUSVLDEXT0, VBUSVLDEXT0);
+ for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) {
+ if (hsphy->update_seq_cfg[i].need_update)
+ qcom_snps_hsphy_write_mask(hsphy->base,
+ hsphy->update_seq_cfg[i].offset,
+ hsphy->update_seq_cfg[i].mask,
+ hsphy->update_seq_cfg[i].value);
+ }
+
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
VREGBYPASS, VREGBYPASS);
@@ -280,7 +478,10 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = {
static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
{ .compatible = "qcom,sm8150-usb-hs-phy", },
{ .compatible = "qcom,usb-snps-hs-5nm-phy", },
- { .compatible = "qcom,usb-snps-hs-7nm-phy", },
+ {
+ .compatible = "qcom,usb-snps-hs-7nm-phy",
+ .data = &sc7280_snps_7nm_phy,
+ },
{ .compatible = "qcom,usb-snps-femto-v2-phy", },
{ }
};
@@ -291,6 +492,55 @@ static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
qcom_snps_hsphy_runtime_resume, NULL)
};
+static void qcom_snps_hsphy_override_param_update_val(
+ const struct override_param_map map,
+ s32 dt_val, struct phy_override_seq *seq_entry)
+{
+ int i;
+
+ /*
+ * Param table for each param is in increasing order
+ * of dt values. We need to iterate over the list to
+ * select the entry that matches the dt value and pick
+ * up the corresponding register value.
+ */
+ for (i = 0; i < map.table_size - 1; i++) {
+ if (map.param_table[i].value == dt_val)
+ break;
+ }
+
+ seq_entry->need_update = true;
+ seq_entry->offset = map.reg_offset;
+ seq_entry->mask = map.param_mask;
+ seq_entry->value = map.param_table[i].reg_val << __ffs(map.param_mask);
+}
+
+static void qcom_snps_hsphy_read_override_param_seq(struct device *dev)
+{
+ struct device_node *node = dev->of_node;
+ s32 val;
+ int ret, i;
+ struct qcom_snps_hsphy *hsphy;
+ const struct override_param_map *cfg = of_device_get_match_data(dev);
+
+ if (!cfg)
+ return;
+
+ hsphy = dev_get_drvdata(dev);
+
+ for (i = 0; cfg[i].prop_name != NULL; i++) {
+ ret = of_property_read_s32(node, cfg[i].prop_name, &val);
+ if (ret)
+ continue;
+
+ qcom_snps_hsphy_override_param_update_val(cfg[i], val,
+ &hsphy->update_seq_cfg[i]);
+ dev_dbg(&hsphy->phy->dev, "Read param: %s dt_val: %d reg_val: 0x%x\n",
+ cfg[i].prop_name, val, hsphy->update_seq_cfg[i].value);
+
+ }
+}
+
static int qcom_snps_hsphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -352,6 +602,7 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
dev_set_drvdata(dev, hsphy);
phy_set_drvdata(generic_phy, hsphy);
+ qcom_snps_hsphy_read_override_param_seq(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
--
2.7.4
On Tue, Sep 06, 2022 at 09:45:32PM +0530, Krishna Kurapati wrote:
> Add support for overriding electrical signal tuning parameters for
> SNPS HS Phy.
>
Reviewed-by: Bjorn Andersson <[email protected]>
Regards,
Bjorn
> Signed-off-by: Krishna Kurapati <[email protected]>
> ---
> drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 255 +++++++++++++++++++++++++-
> 1 file changed, 253 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> index 5d20378..2502294 100644
> --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> @@ -52,6 +52,12 @@
> #define USB2_SUSPEND_N BIT(2)
> #define USB2_SUSPEND_N_SEL BIT(3)
>
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0 (0x6c)
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1 (0x70)
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2 (0x74)
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3 (0x78)
> +#define PARAM_OVRD_MASK 0xFF
> +
> #define USB2_PHY_USB_PHY_CFG0 (0x94)
> #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
> #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
> @@ -60,12 +66,47 @@
> #define REFCLK_SEL_MASK GENMASK(1, 0)
> #define REFCLK_SEL_DEFAULT (0x2 << 0)
>
> +#define HS_DISCONNECT_MASK GENMASK(2, 0)
> +#define SQUELCH_DETECTOR_MASK GENMASK(7, 5)
> +
> +#define HS_AMPLITUDE_MASK GENMASK(3, 0)
> +#define PREEMPHASIS_DURATION_MASK BIT(5)
> +#define PREEMPHASIS_AMPLITUDE_MASK GENMASK(7, 6)
> +
> +#define HS_RISE_FALL_MASK GENMASK(1, 0)
> +#define HS_CROSSOVER_VOLTAGE_MASK GENMASK(3, 2)
> +#define HS_OUTPUT_IMPEDANCE_MASK GENMASK(5, 4)
> +
> +#define LS_FS_OUTPUT_IMPEDANCE_MASK GENMASK(3, 0)
> +
> static const char * const qcom_snps_hsphy_vreg_names[] = {
> "vdda-pll", "vdda33", "vdda18",
> };
>
> #define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
>
> +struct override_param {
> + s32 value;
> + u8 reg_val;
> +};
> +
> +struct override_param_map {
> + const char *prop_name;
> + const struct override_param *param_table;
> + u8 table_size;
> + u8 reg_offset;
> + u8 param_mask;
> +};
> +
> +struct phy_override_seq {
> + bool need_update;
> + u8 offset;
> + u8 value;
> + u8 mask;
> +};
> +
> +#define NUM_HSPHY_TUNING_PARAMS (9)
> +
> /**
> * struct qcom_snps_hsphy - snps hs phy attributes
> *
> @@ -91,6 +132,7 @@ struct qcom_snps_hsphy {
>
> bool phy_initialized;
> enum phy_mode mode;
> + struct phy_override_seq update_seq_cfg[NUM_HSPHY_TUNING_PARAMS];
> };
>
> static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
> @@ -173,10 +215,158 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
> return 0;
> }
>
> +static const struct override_param hs_disconnect_sc7280[] = {
> + { -272, 0 },
> + { 0, 1 },
> + { 317, 2 },
> + { 630, 3 },
> + { 973, 4 },
> + { 1332, 5 },
> + { 1743, 6 },
> + { 2156, 7 },
> +};
> +
> +static const struct override_param squelch_det_threshold_sc7280[] = {
> + { -2090, 7 },
> + { -1560, 6 },
> + { -1030, 5 },
> + { -530, 4 },
> + { 0, 3 },
> + { 530, 2 },
> + { 1060, 1 },
> + { 1590, 0 },
> +};
> +
> +static const struct override_param hs_amplitude_sc7280[] = {
> + { -660, 0 },
> + { -440, 1 },
> + { -220, 2 },
> + { 0, 3 },
> + { 230, 4 },
> + { 440, 5 },
> + { 650, 6 },
> + { 890, 7 },
> + { 1110, 8 },
> + { 1330, 9 },
> + { 1560, 10 },
> + { 1780, 11 },
> + { 2000, 12 },
> + { 2220, 13 },
> + { 2430, 14 },
> + { 2670, 15 },
> +};
> +
> +static const struct override_param preemphasis_duration_sc7280[] = {
> + { 10000, 1 },
> + { 20000, 0 },
> +};
> +
> +static const struct override_param preemphasis_amplitude_sc7280[] = {
> + { 10000, 1 },
> + { 20000, 2 },
> + { 30000, 3 },
> + { 40000, 0 },
> +};
> +
> +static const struct override_param hs_rise_fall_time_sc7280[] = {
> + { -4100, 3 },
> + { 0, 2 },
> + { 2810, 1 },
> + { 5430, 0 },
> +};
> +
> +static const struct override_param hs_crossover_voltage_sc7280[] = {
> + { -31000, 1 },
> + { 0, 3 },
> + { 28000, 2 },
> +};
> +
> +static const struct override_param hs_output_impedance_sc7280[] = {
> + { -2300000, 3 },
> + { 0, 2 },
> + { 2600000, 1 },
> + { 6100000, 0 },
> +};
> +
> +static const struct override_param ls_fs_output_impedance_sc7280[] = {
> + { -1053, 15 },
> + { -557, 7 },
> + { 0, 3 },
> + { 612, 1 },
> + { 1310, 0 },
> +};
> +
> +static const struct override_param_map sc7280_snps_7nm_phy[] = {
> + {
> + "qcom,hs-disconnect-bp",
> + hs_disconnect_sc7280,
> + ARRAY_SIZE(hs_disconnect_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> + HS_DISCONNECT_MASK
> + },
> + {
> + "qcom,squelch-detector-bp",
> + squelch_det_threshold_sc7280,
> + ARRAY_SIZE(squelch_det_threshold_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> + SQUELCH_DETECTOR_MASK
> + },
> + {
> + "qcom,hs-amplitude-bp",
> + hs_amplitude_sc7280,
> + ARRAY_SIZE(hs_amplitude_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> + HS_AMPLITUDE_MASK
> + },
> + {
> + "qcom,pre-emphasis-duration-bp",
> + preemphasis_duration_sc7280,
> + ARRAY_SIZE(preemphasis_duration_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> + PREEMPHASIS_DURATION_MASK,
> + },
> + {
> + "qcom,pre-emphasis-amplitude-bp",
> + preemphasis_amplitude_sc7280,
> + ARRAY_SIZE(preemphasis_amplitude_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> + PREEMPHASIS_AMPLITUDE_MASK,
> + },
> + {
> + "qcom,hs-rise-fall-time-bp",
> + hs_rise_fall_time_sc7280,
> + ARRAY_SIZE(hs_rise_fall_time_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> + HS_RISE_FALL_MASK
> + },
> + {
> + "qcom,hs-crossover-voltage-microvolt",
> + hs_crossover_voltage_sc7280,
> + ARRAY_SIZE(hs_crossover_voltage_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> + HS_CROSSOVER_VOLTAGE_MASK
> + },
> + {
> + "qcom,hs-output-impedance-micro-ohms",
> + hs_output_impedance_sc7280,
> + ARRAY_SIZE(hs_output_impedance_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> + HS_OUTPUT_IMPEDANCE_MASK,
> + },
> + {
> + "qcom,ls-fs-output-impedance-bp",
> + ls_fs_output_impedance_sc7280,
> + ARRAY_SIZE(ls_fs_output_impedance_sc7280),
> + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3,
> + LS_FS_OUTPUT_IMPEDANCE_MASK,
> + },
> + {},
> +};
> +
> static int qcom_snps_hsphy_init(struct phy *phy)
> {
> struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> - int ret;
> + int ret, i;
>
> dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
>
> @@ -223,6 +413,14 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
> VBUSVLDEXT0, VBUSVLDEXT0);
>
> + for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) {
> + if (hsphy->update_seq_cfg[i].need_update)
> + qcom_snps_hsphy_write_mask(hsphy->base,
> + hsphy->update_seq_cfg[i].offset,
> + hsphy->update_seq_cfg[i].mask,
> + hsphy->update_seq_cfg[i].value);
> + }
> +
> qcom_snps_hsphy_write_mask(hsphy->base,
> USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
> VREGBYPASS, VREGBYPASS);
> @@ -280,7 +478,10 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = {
> static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
> { .compatible = "qcom,sm8150-usb-hs-phy", },
> { .compatible = "qcom,usb-snps-hs-5nm-phy", },
> - { .compatible = "qcom,usb-snps-hs-7nm-phy", },
> + {
> + .compatible = "qcom,usb-snps-hs-7nm-phy",
> + .data = &sc7280_snps_7nm_phy,
> + },
> { .compatible = "qcom,usb-snps-femto-v2-phy", },
> { }
> };
> @@ -291,6 +492,55 @@ static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
> qcom_snps_hsphy_runtime_resume, NULL)
> };
>
> +static void qcom_snps_hsphy_override_param_update_val(
> + const struct override_param_map map,
> + s32 dt_val, struct phy_override_seq *seq_entry)
> +{
> + int i;
> +
> + /*
> + * Param table for each param is in increasing order
> + * of dt values. We need to iterate over the list to
> + * select the entry that matches the dt value and pick
> + * up the corresponding register value.
> + */
> + for (i = 0; i < map.table_size - 1; i++) {
> + if (map.param_table[i].value == dt_val)
> + break;
> + }
> +
> + seq_entry->need_update = true;
> + seq_entry->offset = map.reg_offset;
> + seq_entry->mask = map.param_mask;
> + seq_entry->value = map.param_table[i].reg_val << __ffs(map.param_mask);
> +}
> +
> +static void qcom_snps_hsphy_read_override_param_seq(struct device *dev)
> +{
> + struct device_node *node = dev->of_node;
> + s32 val;
> + int ret, i;
> + struct qcom_snps_hsphy *hsphy;
> + const struct override_param_map *cfg = of_device_get_match_data(dev);
> +
> + if (!cfg)
> + return;
> +
> + hsphy = dev_get_drvdata(dev);
> +
> + for (i = 0; cfg[i].prop_name != NULL; i++) {
> + ret = of_property_read_s32(node, cfg[i].prop_name, &val);
> + if (ret)
> + continue;
> +
> + qcom_snps_hsphy_override_param_update_val(cfg[i], val,
> + &hsphy->update_seq_cfg[i]);
> + dev_dbg(&hsphy->phy->dev, "Read param: %s dt_val: %d reg_val: 0x%x\n",
> + cfg[i].prop_name, val, hsphy->update_seq_cfg[i].value);
> +
> + }
> +}
> +
> static int qcom_snps_hsphy_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -352,6 +602,7 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>
> dev_set_drvdata(dev, hsphy);
> phy_set_drvdata(generic_phy, hsphy);
> + qcom_snps_hsphy_read_override_param_seq(dev);
>
> phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> if (!IS_ERR(phy_provider))
> --
> 2.7.4
>