The "peripheral" devices on PolarFire SoC can be put into reset, so
update the device tree binding to reflect the presence of a reset
controller.
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Daire McNamara <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
---
.../bindings/clock/microchip,mpfs.yaml | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
index 016a4f378b9b..1d0b6a4fda42 100644
--- a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
@@ -40,8 +40,21 @@ properties:
const: 1
description: |
The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
- for the full list of PolarFire clock IDs.
+ ID in its "clocks" phandle cell.
+ See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+ PolarFire clock IDs.
+
+ resets:
+ maxItems: 1
+
+ '#reset-cells':
+ description:
+ The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+ CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+ peripheral via the clock ID in its "resets" phandle cell.
+ See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+ PolarFire clock IDs.
+ const: 1
required:
- compatible
--
2.36.1